CVE Database

SurrealDB before 3.1.0 fails to enforce the configured recursion depth limit in the value and JSON parser when processing nested braces, brackets, or parentheses. Unauthenticated attackers can send deeply nested JSON payloads to the WebSocket /rpc endpoint to exhaust server memory and crash the process.

SurrealDB versions before 3.1.0 contain a session hijacking vulnerability where the HTTP /rpc sessions method returns attached session UUIDs without authentication and accepts arbitrary session fields with no ownership verification. Unauthenticated attackers can enumerate session UUIDs and impersonate authenticated sessions to read, write, delete data and escalate privileges.

SurrealDB versions before 3.1.0 contain a time-of-check/time-of-use race condition in the HTTP /rpc endpoint that allows unauthenticated requests to inherit authenticated session state. Unauthenticated attackers can send concurrent requests to the /rpc endpoint while legitimate authenticated traffic is active to execute operations with hijacked user privileges.

SurrealDB versions before 3.1.0 contain a denial of service vulnerability in the RPC use handler that panics when db is set without a namespace. Unauthenticated attackers can send a malformed WebSocket message to the /rpc endpoint to crash the server process.

SurrealDB before 3.1.5 contains an arbitrary file read vulnerability in the DEFINE ANALYZER mapper filter that allows database users with EDITOR or OWNER roles to read files accessible to the SurrealDB process. Attackers can specify arbitrary file paths in the mapper filter and retrieve file contents through query error messages when the SURREAL_FILE_ALLOWLIST is empty or not configured.

SurrealDB versions before 3.2.0 fail to validate namespace and database scope in custom API routes, allowing authenticated users to invoke endpoints in different namespaces/databases. Attackers with valid credentials for any namespace/database can access custom API endpoints in other tenants by specifying the target scope in the URL path, reading sensitive data or triggering unintended operations.

In _connect.BRAIN versions prior to 5.06, the application LogPathConfig.exe is executed during setup. During this process, existing permissions on %ProgramData% are deleted and replaced, granting the Windows group Everyone full control instead of restricting access to %ProgramData%\Bizerba\_connect.BRAIN or %ProgramData%\Bizerba\BCT. Starting with _connect.BRAIN 5.06, the setup no longer executes this tool.

In BRAIN2 versions prior to 3.09, the application LogPathConfig.exe is executed during setup. As a result, the Windows group Everyone is granted full control over %ProgramData% instead of being restricted to %ProgramData%\Bizerba\BRAIN2\. Starting with BRAIN2 3.09, the setup no longer executes this tool. However, the optional component Bizerba ScriptService still executes it. Bizerba ScriptService is being deprecated and will no longer be included starting with BRAIN2 version 3.11.

An high privileged remote attacker can exploit an authenticated OS command injection vulnerability in the system_certificates view due to improper neutralization of special elements in an OS command. This can result in a total loss of confidentiality, availability and integrity.

Dancer2 versions through 2.1.0 for Perl generate insecure session ids when required CSPRNG modules are unavailable. Dancer2::Core::Role::SessionFactory::generate_id silently falls back to a built-in rand-derived session id unless both Math::Random::ISAAC::XS and Crypt::URandom are available. The fallback session id is generated from a SHA-1 hash of a call to the built-in rand function, the absolute path of the Dancer2::Core::Role::SessionFactory module, an internal counter, the process id, the module instance memory address, and a shuffled string of characters (using the List::Util::shuffle function, which also uses the built-in rand function). These are all low-entropy and easily guessed sources. The built-in rand() function is seeded with 32-bits and considered unsuitable for security applications. Predictable session ids could allow an attacker to gain access to systems.

The Tag Groups is the Advanced Way to Display Your Taxonomy Terms WordPress plugin before 2.2.0 does not properly escape one of its AJAX parameters before reflecting it in the response body served with an HTML content type, allowing unauthenticated attackers to execute arbitrary JavaScript in the browser of a logged-in user with `edit_pages` capability (Editor or higher) who is tricked into following a crafted link.

Crypt::Password versions through 0.28 for Perl are susceptible to timing attacks. The check_password method uses the built-in eq operator. This allows discrepancies in timing to be used to guess the underlying hash.

The Social Login, Passkeys, Magic Link & Email OTP WordPress plugin before 1.4.1 does not enforce rate limiting or a working attempt lockout on its passwordless email one-time-password verification, and stores the short numeric codes in plaintext, allowing an unauthenticated attacker who knows a registered email address to brute-force the code and log in as that user, including an administrator, leading to full site takeover.

The LearnPress WordPress plugin before 4.4.1 does not escape a search parameter before reflecting it into an HTML attribute, leading to Reflected Cross-Site Scripting that executes in the browser of a logged-in instructor or administrator who is tricked into opening a crafted link.

The SlimStat Analytics WordPress plugin before 5.5.0 does not escape a visitor-controlled geolocation value before outputting it in its admin analytics reports, allowing unauthenticated visitors to store a cross-site scripting payload that executes in the browser of an administrator who views the reports. Exploitation requires the SlimStat Analytics WordPress plugin before 5.5.0 to be configured to use the Cloudflare geolocation provider.

The Modern Event Calendar Pro WordPress plugin before 7.34.0, Modern Events Calendar Lite WordPress plugin before 7.34.0 do not sanitise and escape a request parameter before using it in a SQL statement, through an AJAX action available to unauthenticated users, leading to an unauthenticated SQL injection vulnerability that allows attackers to extract sensitive data from the database.

The Unlimited Elements For Elementor WordPress plugin before 2.0.11 does not sanitize or escape Google review content fetched from the Serp API before rendering it in the Google Reviews widget output, allowing unauthenticated attackers who submit a malicious review on the targeted business's Google listing to deliver Stored XSS to any visitor (including administrators) of any WP page displaying that Place ID's reviews.

Meshtastic is an open source mesh networking solution. Prior to version 2.7.23.b246bcd, a single node advertising a User.long_name that contains a malformed character encoding can render other radios unusable over BLE when managed through the iOS app. The malformed name does not need to be maliciously crafted — it can arise from ordinary buffer truncation and has been observed occurring naturally in the wild. At least one code path could place a null terminator in the middle of a multibyte sequence, leaving a malformed User.long_name in the node database. The problem surfaced downstream: the iOS app enforced encoding validation and therefore cannot parse a node database once it contains a poisoned entry. This caused BLE sync to enter a fail/retry loop, resulting in loss of control over the affected device. For a typical user managing their radio with the iOS app, the device becomes effectively unusable until the poisoned node ages out of the on-device database, or unless they have an alternate management path (e.g., the Python CLI, which can be used to identify and remove the offending entries manually). Because the malformed name propagates through the mesh, the temporary presence of a single affected node can degrade BLE management for iOS users across a wide geographical area for an extended period. Less technical users have no straightforward recovery path. Starting in version 2.7.23.b246bcd, the firmware has added input sanitization and regression tests demonstrating recovery for already-poisoned devices. The apps have also taken steps to ensure more graceful handling of malformed encoding sequences as well.

A vulnerability in keras-team/keras version 3.15.0 allows unsafe deserialization of attacker-controlled PyTorch pickle data through the public `keras.layers.TorchModuleWrapper.from_config` method. This method invokes `torch.load(..., weights_only=False)` without requiring an explicit unsafe opt-in, such as a `safe_mode=False` parameter. When called outside a `SafeModeScope(True)` context, the absence of an ambient safe mode state permits unsafe deserialization by default. This issue can lead to arbitrary code execution if untrusted Keras layer configurations are processed using this method. The vulnerability arises because the method does not enforce safe deserialization practices unless explicitly guarded by Keras safe mode.

In the Linux kernel, the following vulnerability has been resolved: iommu/amd: Remove latent out-of-bounds access in IOMMU debugfs In iommu_mmio_write() and iommu_capability_write(), the variables dbg_mmio_offset and dbg_cap_offset are declared as int. However, they are populated using kstrtou32_from_user(). If a user provides a sufficiently large value, it can become a negative integer. Prior to this patch, the AMD IOMMU debugfs implementation was already protected by different mechanisms. 1. #define OFS_IN_SZ 8 ensures the user string <= 8 bytes, so e.g. 0xffffffff isn't a valid input. if (cnt > OFS_IN_SZ) return -EINVAL; 2. Implicit type promotion in iommu_mmio_write(), dbg_mmio_offset is int and iommu->mmio_phys_end is u64 if (dbg_mmio_offset > iommu->mmio_phys_end - sizeof(u64)) return -EINVAL; 3. The show handlers would currently catch the negative number and refuse to perform the read. Replace kstrtou32_from_user() with kstrtos32_from_user() to parse the input, and check for negative values to explicitly prevent out-of-bounds memory accesses directly in iommu_mmio_write() and iommu_capability_write().

In the Linux kernel, the following vulnerability has been resolved: mm: fix __vm_normal_page() to handle missing support for pmd_special()/pud_special() On x86 32-bit with THP enabled, zap_huge_pmd() is seen to generate a "WARNING: mm/memory.c:735 at __vm_normal_page+0x6a/0x7d", from the VM_WARN_ON_ONCE(is_zero_pfn(pfn) || is_huge_zero_pfn(pfn)); followed by "BUG: Bad rss-counter state"s, then later "BUG: Bad page state"s when reclaim gets to call shrink_huge_zero_folio_scan(). It's as if the _PAGE_SPECIAL bit never got set in the huge_zero pmd: and indeed, whereas pte_special() and pte_mkspecial() are subject to a dedicated CONFIG_ARCH_HAS_PTE_SPECIAL, pmd_special() and pmd_mkspecial() are subject to CONFIG_ARCH_SUPPORTS_PMD_PFNMAP, which is never enabled on any 32-bit architecture. While the problem was exposed through commit d80a9cb1a64a ("mm/huge_memory: add and use normal_or_softleaf_folio_pmd()"), it was an oversight in commit af38538801c6 ("mm/memory: factor out common code from vm_normal_page_*()") and would result in other problems: * huge zero folio accounted in smaps, pagemap (PAGE_IS_FILE) and numamaps as file-backed THP * folio_walk_start() returning the folio even without FW_ZEROPAGE set. Callers seem to tolerate that, though. ... and triggering the VM_WARN_ON_ONE(), although never reported so far. To fix it, teach vm_normal_page_pmd()/vm_normal_page_pud() to consider whether pmd_special/pud_special is actually implemented.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: bnep: Fix UAF read of dev->name bnep_add_connection() needs to keep holding the bnep_session_sem while reading dev->name (just like bnep_get_connlist() does); otherwise the bnep_session() thread can concurrently free the net_device, which can for example be triggered by a concurrent bnep_del_connection(). (This UAF is fairly uninteresting from a security perspective; calling bnep_add_connection() requires passing a capable(CAP_NET_ADMIN) check. It also requires completely tearing down a netdev during a fairly tight race window.)

In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mvm: fix driver-set TX rates on old devices On old devices such as 7265D, rates are still encoded in version 1 format, which doesn't use the CCK/OFDM rate index (0-3/0-7) but rather their PLCP value (e.g. 10 for 1 Mbps CCK rate.) While introducing v3 rates, I changed the driver from internally handling v1 rates and converting to v2, to internally handling v3 and converting to v1 or v2 according to the firmware. I accordingly changed the code in iwl_mvm_mac80211_idx_to_hwrate() to no longer have different values for different APIs. This was correct. However, I later reverted this part of the change, because it was reported that I had broken beacon rates, causing a FW assert/crash. This caused TX_CMD rates to be set incorrectly, potentially causing a warning when reported back from the device as having been used. Fix this (hopefully correctly now) by handling beacon rates in the TX_CMD that's embedded in the beacon template command separately. Restore iwl_mvm_mac80211_idx_to_hwrate() to return only the rate index, not PLCP value, fixing the real TX_CMD.

In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mld: stop TX during firmware restart When iwlwifi firmware crashes (e.g., NMI_INTERRUPT_UNKNOWN on Intel BE201/Wi-Fi 7), iwl_mld_nic_error() sets mld->fw_status.in_hw_restart to true. However, iwl_mld_tx_from_txq() does not check this flag before dequeuing frames from mac80211 and pushing them to the transport layer. Since the firmware is dead, iwl_trans_tx() returns -EIO for each frame, which then gets freed immediately. Under high-throughput conditions (e.g., Tailscale UDP traffic or active SSH sessions), this creates a tight dequeue-send-fail-free loop that wastes CPU cycles and generates rapid skb allocation churn, leading to memory pressure from slab fragmentation. The RX path already has this guard (iwl_mld_rx_mpdu checks in_hw_restart at rx.c:1906), and so does the TXQ allocation worker (iwl_mld_add_txqs_wk at tx.c:156). Add the same guard to iwl_mld_tx_from_txq() to stop all TX during firmware restart. Frames left in mac80211's TXQs are naturally drained after restart completes, when queue reallocation triggers iwl_mld_tx_from_txq() via iwl_mld_add_txq_list(), or when new upper-layer traffic invokes wake_tx_queue. Tested on ASUS Zenbook 14 UX3405CA with Intel BE201 (Wi-Fi 7) on kernel 6.19.5 where the firmware crashes approximately every 10-15 minutes under Tailscale traffic.

In the Linux kernel, the following vulnerability has been resolved: KVM: SVM: Disable AVIC IPI virtualization on Hygon Family 18h (erratum #1235) Hygon Family 18h CPUs are derived from AMD Family 17h (Zen1) silicon and share the same erratum #1235: hardware may read a stale IsRunning=1 bit during ICR write emulation and silently fail to generate an AVIC_IPI_FAILURE_TARGET_NOT_RUNNING VM-Exit on the sending vCPU. The absence of the VM-Exit causes KVM to miss the required wakeup of blocking target vCPUs, leading to hung vCPUs and unbounded delays in guest execution. Extend the existing AMD Family 17h erratum #1235 workaround to also cover Hygon Family 18h. With IPI virtualization disabled, KVM never sets IsRunning=1 in the Physical ID table, so every non-self IPI generates a VM-Exit and is correctly emulated.

In the Linux kernel, the following vulnerability has been resolved: netfs: Fix write streaming disablement if fd open O_RDWR In netfs_perform_write(), "write streaming" (the caching of dirty data in dirty but !uptodate folios) is performed to avoid the need to read data that is just going to get immediately overwritten. However, this is/will be disabled in three circumstances: if the fd is open O_RDWR, if fscache is in use (as we need to round out the blocks for DIO) or if content encryption is enabled (again for rounding out purposes). The idea behind disabling it if the fd is open O_RDWR is that we'd need to flush the write-streaming page before we could read the data, particularly through mmap. But netfs now fills in the gaps if ->read_folio() is called on the page, so that is unnecessary. Further, this doesn't actually work if a separate fd is open for reading. Fix this by removing the check for O_RDWR, thereby allowing streaming writes even when we might read. This caused a number of problems with the generic/522 xfstest, but those are now fixed.

In the Linux kernel, the following vulnerability has been resolved: drm/msm: Fix iommu_map_sgtable() return value check and avoid WARN Commit "iommu: return full error code from iommu_map_sg[_atomic]()" changed iommu_map_sgtable() to return an ssize_t and negative values in error cases, rather than a size_t and a zero. Store the return value in the appropriate type and in case of error, return it rather than WARNing. Patchwork: https://patchwork.freedesktop.org/patch/719685/

In the Linux kernel, the following vulnerability has been resolved: iommu: Handle unmap error when iommu_debug is enabled Sashiko noticed a latent bug where the map error flow called iommu_unmap() which calls iommu_debug_unmap_begin()/iommu_debug_unmap_end() however since this is an error path the map flow never actually established the original iommu_debug_map() it will malfunction. Lift the unmap error handling into iommu_map_nosync() and reorder it so the trace_map()/iommu_debug_map() records the partial mapping and then immediately unmaps it. This avoid creating the unbalanced tracking and provides saner tracing instead of a unmap unmatched to any map.

In the Linux kernel, the following vulnerability has been resolved: iommupt: Check for missing PAGE_SIZE in the pgsize_bitmap Sashiko pointed out that the driver could drop PAGE_SIZE from the pgsize_bitmap. That is technically allowed but nothing does it, and such an iommu_domain would not be used with the DMA API today. Still, it is against the design and it is trivial to fix up. Lift the PT_WARN_ON to the if branch and just skip the fast path.

In the Linux kernel, the following vulnerability has been resolved: pds_core: fix error handling in pdsc_devcmd_wait Fix two cases where pdsc_devcmd_wait() returns stale success from the completion register instead of an error: 1. FW crash: If firmware stops running, the wait loop breaks early with running=false. The condition "if ((!done || timeout) && running)" is false, so error handling is bypassed and stale status is returned. Check !running first and return -ENXIO. 2. Timeout: If a command times out, err is set to -ETIMEDOUT but then overwritten by pdsc_err_to_errno(status) which reads stale status. Return -ETIMEDOUT immediately after cleaning up. Both errors now propagate to pdsc_devcmd_locked() which queues health_work for recovery.