CyberRota Analysis
AI-GeneratedThe vulnerability affects the Linux kernel's handling of I2C block reads for the DS28E17 1-Wire to I2C bridge, where an attacker can manipulate the length byte to trigger a buffer overflow, potentially leading to memory corruption. This flaw can result in unauthorized access or system instability, making it critical for organizations using affected Linux systems, particularly those interfacing with I2C devices, to prioritize remediation. Users should ensure their systems are updated to mitigate the risk associated with this vulnerability.
Original NVD Description
In the Linux kernel, the following vulnerability has been resolved: w1: ds28e17: reject an oversize length on an I2C block read w1_f19_i2c_master_transfer() is the master_xfer for the DS28E17 1-Wire to I2C bridge. On an I2C_M_RECV_LEN read, it takes the length from the device. The downstream slave puts a length byte in buf[0]. The driver then reads that many bytes into buf[1] with w1_f19_i2c_read(). buf[0] is controlled by the device and can be 0 to 255. w1_f19_i2c_read() only rejects a zero count. The caller buffer is I2C_SMBUS_BLOCK_MAX + 2, so 34 bytes. A length above 32 makes the read run past it, up to about 222 bytes out of bounds. The SMBus core does check buf[0] against I2C_SMBUS_BLOCK_MAX. That check runs after master_xfer returns. By then the write is already done. i2c-algo-bit rejects an oversize length before it copies, and returns -EPROTO. Reject a length above I2C_SMBUS_BLOCK_MAX at both RECV_LEN sites, the same way i2c-algo-bit does.