CVE Database

In the Linux kernel, the following vulnerability has been resolved: ice: fix devlink reload call trace Commit 4da71a77fc3b ("ice: read internal temperature sensor") introduced internal temperature sensor reading via HWMON. ice_hwmon_init() was added to ice_init_feature() and ice_hwmon_exit() was added to ice_remove(). As a result if devlink reload is used to reinit the device and then the driver is removed, a call trace can occur. BUG: unable to handle page fault for address: ffffffffc0fd4b5d Call Trace: string+0x48/0xe0 vsnprintf+0x1f9/0x650 sprintf+0x62/0x80 name_show+0x1f/0x30 dev_attr_show+0x19/0x60 The call trace repeats approximately every 10 minutes when system monitoring tools (e.g., sadc) attempt to read the orphaned hwmon sysfs attributes that reference freed module memory. The sequence is: 1. Driver load, ice_hwmon_init() gets called from ice_init_feature() 2. Devlink reload down, flow does not call ice_remove() 3. Devlink reload up, ice_hwmon_init() gets called from ice_init_feature() resulting in a second instance 4. Driver unload, ice_hwmon_exit() called from ice_remove() leaving the first hwmon instance orphaned with dangling pointer Fix this by moving ice_hwmon_exit() from ice_remove() to ice_deinit_features() to ensure proper cleanup symmetry with ice_hwmon_init().

In the Linux kernel, the following vulnerability has been resolved: leds: led-class: Only Add LED to leds_list when it is fully ready Before this change the LED was added to leds_list before led_init_core() gets called adding it the list before led_classdev.set_brightness_work gets initialized. This leaves a window where led_trigger_register() of a LED's default trigger will call led_trigger_set() which calls led_set_brightness() which in turn will end up queueing the *uninitialized* led_classdev.set_brightness_work. This race gets hit by the lenovo-thinkpad-t14s EC driver which registers 2 LEDs with a default trigger provided by snd_ctl_led.ko in quick succession. The first led_classdev_register() causes an async modprobe of snd_ctl_led to run and that async modprobe manages to exactly hit the window where the second LED is on the leds_list without led_init_core() being called for it, resulting in: ------------[ cut here ]------------ WARNING: CPU: 11 PID: 5608 at kernel/workqueue.c:4234 __flush_work+0x344/0x390 Hardware name: LENOVO 21N2S01F0B/21N2S01F0B, BIOS N42ET93W (2.23 ) 09/01/2025 ... Call trace: __flush_work+0x344/0x390 (P) flush_work+0x2c/0x50 led_trigger_set+0x1c8/0x340 led_trigger_register+0x17c/0x1c0 led_trigger_register_simple+0x84/0xe8 snd_ctl_led_init+0x40/0xf88 [snd_ctl_led] do_one_initcall+0x5c/0x318 do_init_module+0x9c/0x2b8 load_module+0x7e0/0x998 Close the race window by moving the adding of the LED to leds_list to after the led_init_core() call.

In the Linux kernel, the following vulnerability has been resolved: mm/hugetlb: fix hugetlb_pmd_shared() Patch series "mm/hugetlb: fixes for PMD table sharing (incl. using mmu_gather)", v3. One functional fix, one performance regression fix, and two related comment fixes. I cleaned up my prototype I recently shared [1] for the performance fix, deferring most of the cleanups I had in the prototype to a later point. While doing that I identified the other things. The goal of this patch set is to be backported to stable trees "fairly" easily. At least patch #1 and #4. Patch #1 fixes hugetlb_pmd_shared() not detecting any sharing Patch #2 + #3 are simple comment fixes that patch #4 interacts with. Patch #4 is a fix for the reported performance regression due to excessive IPI broadcasts during fork()+exit(). The last patch is all about TLB flushes, IPIs and mmu_gather. Read: complicated There are plenty of cleanups in the future to be had + one reasonable optimization on x86. But that's all out of scope for this series. Runtime tested, with a focus on fixing the performance regression using the original reproducer [2] on x86. This patch (of 4): We switched from (wrongly) using the page count to an independent shared count. Now, shared page tables have a refcount of 1 (excluding speculative references) and instead use ptdesc->pt_share_count to identify sharing. We didn't convert hugetlb_pmd_shared(), so right now, we would never detect a shared PMD table as such, because sharing/unsharing no longer touches the refcount of a PMD table. Page migration, like mbind() or migrate_pages() would allow for migrating folios mapped into such shared PMD tables, even though the folios are not exclusive. In smaps we would account them as "private" although they are "shared", and we would be wrongly setting the PM_MMAP_EXCLUSIVE in the pagemap interface. Fix it by properly using ptdesc_pmd_is_shared() in hugetlb_pmd_shared().

In the Linux kernel, the following vulnerability has been resolved: migrate: correct lock ordering for hugetlb file folios Syzbot has found a deadlock (analyzed by Lance Yang): 1) Task (5749): Holds folio_lock, then tries to acquire i_mmap_rwsem(read lock). 2) Task (5754): Holds i_mmap_rwsem(write lock), then tries to acquire folio_lock. migrate_pages() -> migrate_hugetlbs() -> unmap_and_move_huge_page() <- Takes folio_lock! -> remove_migration_ptes() -> __rmap_walk_file() -> i_mmap_lock_read() <- Waits for i_mmap_rwsem(read lock)! hugetlbfs_fallocate() -> hugetlbfs_punch_hole() <- Takes i_mmap_rwsem(write lock)! -> hugetlbfs_zero_partial_page() -> filemap_lock_hugetlb_folio() -> filemap_lock_folio() -> __filemap_get_folio <- Waits for folio_lock! The migration path is the one taking locks in the wrong order according to the documentation at the top of mm/rmap.c. So expand the scope of the existing i_mmap_lock to cover the calls to remove_migration_ptes() too. This is (mostly) how it used to be after commit c0d0381ade79. That was removed by 336bf30eb765 for both file & anon hugetlb pages when it should only have been removed for anon hugetlb pages.

In the Linux kernel, the following vulnerability has been resolved: uacce: fix cdev handling in the cleanup path When cdev_device_add fails, it internally releases the cdev memory, and if cdev_device_del is then executed, it will cause a hang error. To fix it, we check the return value of cdev_device_add() and clear uacce->cdev to avoid calling cdev_device_del in the uacce_remove.

In the Linux kernel, the following vulnerability has been resolved: uacce: fix isolate sysfs check condition uacce supports the device isolation feature. If the driver implements the isolate_err_threshold_read and isolate_err_threshold_write callback functions, uacce will create sysfs files now. Users can read and configure the isolation policy through sysfs. Currently, sysfs files are created as long as either isolate_err_threshold_read or isolate_err_threshold_write callback functions are present. However, accessing a non-existent callback function may cause the system to crash. Therefore, intercept the creation of sysfs if neither read nor write exists; create sysfs if either is supported, but intercept unsupported operations at the call site.

In the Linux kernel, the following vulnerability has been resolved: ksmbd: smbd: fix dma_unmap_sg() nents The dma_unmap_sg() functions should be called with the same nents as the dma_map_sg(), not the value the map function returned.

In the Linux kernel, the following vulnerability has been resolved: intel_th: fix device leak on output open() Make sure to drop the reference taken when looking up the th device during output device open() on errors and on close(). Note that a recent commit fixed the leak in a couple of open() error paths but not all of them, and the reference is still leaking on successful open().

In the Linux kernel, the following vulnerability has been resolved: slimbus: core: fix device reference leak on report present Slimbus devices can be allocated dynamically upon reception of report-present messages. Make sure to drop the reference taken when looking up already registered devices. Note that this requires taking an extra reference in case the device has not yet been registered and has to be allocated.

In the Linux kernel, the following vulnerability has been resolved: tracing: Fix crash on synthetic stacktrace field usage When creating a synthetic event based on an existing synthetic event that had a stacktrace field and the new synthetic event used that field a kernel crash occurred: ~# cd /sys/kernel/tracing ~# echo 's:stack unsigned long stack[];' > dynamic_events ~# echo 'hist:keys=prev_pid:s0=common_stacktrace if prev_state & 3' >> events/sched/sched_switch/trigger ~# echo 'hist:keys=next_pid:s1=$s0:onmatch(sched.sched_switch).trace(stack,$s1)' >> events/sched/sched_switch/trigger The above creates a synthetic event that takes a stacktrace when a task schedules out in a non-running state and passes that stacktrace to the sched_switch event when that task schedules back in. It triggers the "stack" synthetic event that has a stacktrace as its field (called "stack"). ~# echo 's:syscall_stack s64 id; unsigned long stack[];' >> dynamic_events ~# echo 'hist:keys=common_pid:s2=stack' >> events/synthetic/stack/trigger ~# echo 'hist:keys=common_pid:s3=$s2,i0=id:onmatch(synthetic.stack).trace(syscall_stack,$i0,$s3)' >> events/raw_syscalls/sys_exit/trigger The above makes another synthetic event called "syscall_stack" that attaches the first synthetic event (stack) to the sys_exit trace event and records the stacktrace from the stack event with the id of the system call that is exiting. When enabling this event (or using it in a historgram): ~# echo 1 > events/synthetic/syscall_stack/enable Produces a kernel crash! BUG: unable to handle page fault for address: 0000000000400010 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: Oops: 0000 [#1] SMP PTI CPU: 6 UID: 0 PID: 1257 Comm: bash Not tainted 6.16.3+deb14-amd64 #1 PREEMPT(lazy) Debian 6.16.3-1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.17.0-debian-1.17.0-1 04/01/2014 RIP: 0010:trace_event_raw_event_synth+0x90/0x380 Code: c5 00 00 00 00 85 d2 0f 84 e1 00 00 00 31 db eb 34 0f 1f 00 66 66 2e 0f 1f 84 00 00 00 00 00 66 66 2e 0f 1f 84 00 00 00 00 00 <49> 8b 04 24 48 83 c3 01 8d 0c c5 08 00 00 00 01 cd 41 3b 5d 40 0f RSP: 0018:ffffd2670388f958 EFLAGS: 00010202 RAX: ffff8ba1065cc100 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000001 RSI: fffff266ffda7b90 RDI: ffffd2670388f9b0 RBP: 0000000000000010 R08: ffff8ba104e76000 R09: ffffd2670388fa50 R10: ffff8ba102dd42e0 R11: ffffffff9a908970 R12: 0000000000400010 R13: ffff8ba10a246400 R14: ffff8ba10a710220 R15: fffff266ffda7b90 FS: 00007fa3bc63f740(0000) GS:ffff8ba2e0f48000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000400010 CR3: 0000000107f9e003 CR4: 0000000000172ef0 Call Trace: <TASK> ? __tracing_map_insert+0x208/0x3a0 action_trace+0x67/0x70 event_hist_trigger+0x633/0x6d0 event_triggers_call+0x82/0x130 trace_event_buffer_commit+0x19d/0x250 trace_event_raw_event_sys_exit+0x62/0xb0 syscall_exit_work+0x9d/0x140 do_syscall_64+0x20a/0x2f0 ? trace_event_raw_event_sched_switch+0x12b/0x170 ? save_fpregs_to_fpstate+0x3e/0x90 ? _raw_spin_unlock+0xe/0x30 ? finish_task_switch.isra.0+0x97/0x2c0 ? __rseq_handle_notify_resume+0xad/0x4c0 ? __schedule+0x4b8/0xd00 ? restore_fpregs_from_fpstate+0x3c/0x90 ? switch_fpu_return+0x5b/0xe0 ? do_syscall_64+0x1ef/0x2f0 ? do_fault+0x2e9/0x540 ? __handle_mm_fault+0x7d1/0xf70 ? count_memcg_events+0x167/0x1d0 ? handle_mm_fault+0x1d7/0x2e0 ? do_user_addr_fault+0x2c3/0x7f0 entry_SYSCALL_64_after_hwframe+0x76/0x7e The reason is that the stacktrace field is not labeled as such, and is treated as a normal field and not as a dynamic event that it is. In trace_event_raw_event_synth() the event is field is still treated as a dynamic array, but the retrieval of the data is considered a normal field, and the reference is just the meta data: // Meta data is retrieved instead of a dynamic array ---truncated---

In the Linux kernel, the following vulnerability has been resolved: scsi: xen: scsiback: Fix potential memory leak in scsiback_remove() Memory allocated for struct vscsiblk_info in scsiback_probe() is not freed in scsiback_remove() leading to potential memory leaks on remove, as well as in the scsiback_probe() error paths. Fix that by freeing it in scsiback_remove().

In the Linux kernel, the following vulnerability has been resolved: vsock/virtio: cap TX credit to local buffer size The virtio transports derives its TX credit directly from peer_buf_alloc, which is set from the remote endpoint's SO_VM_SOCKETS_BUFFER_SIZE value. On the host side this means that the amount of data we are willing to queue for a connection is scaled by a guest-chosen buffer size, rather than the host's own vsock configuration. A malicious guest can advertise a large buffer and read slowly, causing the host to allocate a correspondingly large amount of sk_buff memory. The same thing would happen in the guest with a malicious host, since virtio transports share the same code base. Introduce a small helper, virtio_transport_tx_buf_size(), that returns min(peer_buf_alloc, buf_alloc), and use it wherever we consume peer_buf_alloc. This ensures the effective TX window is bounded by both the peer's advertised buffer and our own buf_alloc (already clamped to buffer_max_size via SO_VM_SOCKETS_BUFFER_MAX_SIZE), so a remote peer cannot force the other to queue more data than allowed by its own vsock settings. On an unpatched Ubuntu 22.04 host (~64 GiB RAM), running a PoC with 32 guest vsock connections advertising 2 GiB each and reading slowly drove Slab/SUnreclaim from ~0.5 GiB to ~57 GiB; the system only recovered after killing the QEMU process. That said, if QEMU memory is limited with cgroups, the maximum memory used will be limited. With this patch applied: Before: MemFree: ~61.6 GiB Slab: ~142 MiB SUnreclaim: ~117 MiB After 32 high-credit connections: MemFree: ~61.5 GiB Slab: ~178 MiB SUnreclaim: ~152 MiB Only ~35 MiB increase in Slab/SUnreclaim, no host OOM, and the guest remains responsive. Compatibility with non-virtio transports: - VMCI uses the AF_VSOCK buffer knobs to size its queue pairs per socket based on the local vsk->buffer_* values; the remote side cannot enlarge those queues beyond what the local endpoint configured. - Hyper-V's vsock transport uses fixed-size VMBus ring buffers and an MTU bound; there is no peer-controlled credit field comparable to peer_buf_alloc, and the remote endpoint cannot drive in-flight kernel memory above those ring sizes. - The loopback path reuses virtio_transport_common.c, so it naturally follows the same semantics as the virtio transport. This change is limited to virtio_transport_common.c and thus affects virtio-vsock, vhost-vsock, and loopback, bringing them in line with the "remote window intersected with local policy" behaviour that VMCI and Hyper-V already effectively have. [Stefano: small adjustments after changing the previous patch] [Stefano: tweak the commit message]

In the Linux kernel, the following vulnerability has been resolved: irqchip/gic-v3-its: Avoid truncating memory addresses On 32-bit machines with CONFIG_ARM_LPAE, it is possible for lowmem allocations to be backed by addresses physical memory above the 32-bit address limit, as found while experimenting with larger VMSPLIT configurations. This caused the qemu virt model to crash in the GICv3 driver, which allocates the 'itt' object using GFP_KERNEL. Since all memory below the 4GB physical address limit is in ZONE_DMA in this configuration, kmalloc() defaults to higher addresses for ZONE_NORMAL, and the ITS driver stores the physical address in a 32-bit 'unsigned long' variable. Change the itt_addr variable to the correct phys_addr_t type instead, along with all other variables in this driver that hold a physical address. The gicv5 driver correctly uses u64 variables, while all other irqchip drivers don't call virt_to_phys or similar interfaces. It's expected that other device drivers have similar issues, but fixing this one is sufficient for booting a virtio based guest.

In the Linux kernel, the following vulnerability has been resolved: be2net: Fix NULL pointer dereference in be_cmd_get_mac_from_list When the parameter pmac_id_valid argument of be_cmd_get_mac_from_list() is set to false, the driver may request the PMAC_ID from the firmware of the network card, and this function will store that PMAC_ID at the provided address pmac_id. This is the contract of this function. However, there is a location within the driver where both pmac_id_valid == false and pmac_id == NULL are being passed. This could result in dereferencing a NULL pointer. To resolve this issue, it is necessary to pass the address of a stub variable to the function.

In the Linux kernel, the following vulnerability has been resolved: can: gs_usb: gs_usb_receive_bulk_callback(): unanchor URL on usb_submit_urb() error In commit 7352e1d5932a ("can: gs_usb: gs_usb_receive_bulk_callback(): fix URB memory leak"), the URB was re-anchored before usb_submit_urb() in gs_usb_receive_bulk_callback() to prevent a leak of this URB during cleanup. However, this patch did not take into account that usb_submit_urb() could fail. The URB remains anchored and usb_kill_anchored_urbs(&parent->rx_submitted) in gs_can_close() loops infinitely since the anchor list never becomes empty. To fix the bug, unanchor the URB when an usb_submit_urb() error occurs, also print an info message.

In the Linux kernel, the following vulnerability has been resolved: net: phy: intel-xway: fix OF node refcount leakage Automated review spotted am OF node reference count leakage when checking if the 'leds' child node exists. Call of_put_node() to correctly maintain the refcount.

In the Linux kernel, the following vulnerability has been resolved: can: mcba_usb: mcba_usb_read_bulk_callback(): fix URB memory leak Fix similar memory leak as in commit 7352e1d5932a ("can: gs_usb: gs_usb_receive_bulk_callback(): fix URB memory leak"). In mcba_usb_probe() -> mcba_usb_start(), the URBs for USB-in transfers are allocated, added to the priv->rx_submitted anchor and submitted. In the complete callback mcba_usb_read_bulk_callback(), the URBs are processed and resubmitted. In mcba_usb_close() -> mcba_urb_unlink() the URBs are freed by calling usb_kill_anchored_urbs(&priv->rx_submitted). However, this does not take into account that the USB framework unanchors the URB before the complete function is called. This means that once an in-URB has been completed, it is no longer anchored and is ultimately not released in usb_kill_anchored_urbs(). Fix the memory leak by anchoring the URB in the mcba_usb_read_bulk_callback()to the priv->rx_submitted anchor.

In the Linux kernel, the following vulnerability has been resolved: gpio: cdev: Fix resource leaks on errors in lineinfo_changed_notify() On error handling paths, lineinfo_changed_notify() doesn't free the allocated resources which results leaks. Fix it.

In the Linux kernel, the following vulnerability has been resolved: can: esd_usb: esd_usb_read_bulk_callback(): fix URB memory leak Fix similar memory leak as in commit 7352e1d5932a ("can: gs_usb: gs_usb_receive_bulk_callback(): fix URB memory leak"). In esd_usb_open(), the URBs for USB-in transfers are allocated, added to the dev->rx_submitted anchor and submitted. In the complete callback esd_usb_read_bulk_callback(), the URBs are processed and resubmitted. In esd_usb_close() the URBs are freed by calling usb_kill_anchored_urbs(&dev->rx_submitted). However, this does not take into account that the USB framework unanchors the URB before the complete function is called. This means that once an in-URB has been completed, it is no longer anchored and is ultimately not released in esd_usb_close(). Fix the memory leak by anchoring the URB in the esd_usb_read_bulk_callback() to the dev->rx_submitted anchor.

In the Linux kernel, the following vulnerability has been resolved: l2tp: Fix memleak in l2tp_udp_encap_recv(). syzbot reported memleak of struct l2tp_session, l2tp_tunnel, sock, etc. [0] The cited commit moved down the validation of the protocol version in l2tp_udp_encap_recv(). The new place requires an extra error handling to avoid the memleak. Let's call l2tp_session_put() there. [0]: BUG: memory leak unreferenced object 0xffff88810a290200 (size 512): comm "syz.0.17", pid 6086, jiffies 4294944299 hex dump (first 32 bytes): 7d eb 04 0c 00 00 00 00 01 00 00 00 00 00 00 00 }............... 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace (crc babb6a4f): kmemleak_alloc_recursive include/linux/kmemleak.h:44 [inline] slab_post_alloc_hook mm/slub.c:4958 [inline] slab_alloc_node mm/slub.c:5263 [inline] __do_kmalloc_node mm/slub.c:5656 [inline] __kmalloc_noprof+0x3e0/0x660 mm/slub.c:5669 kmalloc_noprof include/linux/slab.h:961 [inline] kzalloc_noprof include/linux/slab.h:1094 [inline] l2tp_session_create+0x3a/0x3b0 net/l2tp/l2tp_core.c:1778 pppol2tp_connect+0x48b/0x920 net/l2tp/l2tp_ppp.c:755 __sys_connect_file+0x7a/0xb0 net/socket.c:2089 __sys_connect+0xde/0x110 net/socket.c:2108 __do_sys_connect net/socket.c:2114 [inline] __se_sys_connect net/socket.c:2111 [inline] __x64_sys_connect+0x1c/0x30 net/socket.c:2111 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xa4/0xf80 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f

In the Linux kernel, the following vulnerability has been resolved: regmap: Fix race condition in hwspinlock irqsave routine Previously, the address of the shared member '&map->spinlock_flags' was passed directly to 'hwspin_lock_timeout_irqsave'. This creates a race condition where multiple contexts contending for the lock could overwrite the shared flags variable, potentially corrupting the state for the current lock owner. Fix this by using a local stack variable 'flags' to store the IRQ state temporarily.

In the Linux kernel, the following vulnerability has been resolved: Octeontx2-af: Add proper checks for fwdata firmware populates MAC address, link modes (supported, advertised) and EEPROM data in shared firmware structure which kernel access via MAC block(CGX/RPM). Accessing fwdata, on boards booted with out MAC block leading to kernel panics. Internal error: Oops: 0000000096000005 [#1] SMP [ 10.460721] Modules linked in: [ 10.463779] CPU: 0 UID: 0 PID: 174 Comm: kworker/0:3 Not tainted 6.19.0-rc5-00154-g76ec646abdf7-dirty #3 PREEMPT [ 10.474045] Hardware name: Marvell OcteonTX CN98XX board (DT) [ 10.479793] Workqueue: events work_for_cpu_fn [ 10.484159] pstate: 80400009 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 10.491124] pc : rvu_sdp_init+0x18/0x114 [ 10.495051] lr : rvu_probe+0xe58/0x1d18

In the Linux kernel, the following vulnerability has been resolved: vsock/virtio: fix potential underflow in virtio_transport_get_credit() The credit calculation in virtio_transport_get_credit() uses unsigned arithmetic: ret = vvs->peer_buf_alloc - (vvs->tx_cnt - vvs->peer_fwd_cnt); If the peer shrinks its advertised buffer (peer_buf_alloc) while bytes are in flight, the subtraction can underflow and produce a large positive value, potentially allowing more data to be queued than the peer can handle. Reuse virtio_transport_has_space() which already handles this case and add a comment to make it clear why we are doing that. [Stefano: use virtio_transport_has_space() instead of duplicating the code] [Stefano: tweak the commit message]

In the Linux kernel, the following vulnerability has been resolved: iommu/io-pgtable-arm: fix size_t signedness bug in unmap path __arm_lpae_unmap() returns size_t but was returning -ENOENT (negative error code) when encountering an unmapped PTE. Since size_t is unsigned, -ENOENT (typically -2) becomes a huge positive value (0xFFFFFFFFFFFFFFFE on 64-bit systems). This corrupted value propagates through the call chain: __arm_lpae_unmap() returns -ENOENT as size_t -> arm_lpae_unmap_pages() returns it -> __iommu_unmap() adds it to iova address -> iommu_pgsize() triggers BUG_ON due to corrupted iova This can cause IOVA address overflow in __iommu_unmap() loop and trigger BUG_ON in iommu_pgsize() from invalid address alignment. Fix by returning 0 instead of -ENOENT. The WARN_ON already signals the error condition, and returning 0 (meaning "nothing unmapped") is the correct semantic for size_t return type. This matches the behavior of other io-pgtable implementations (io-pgtable-arm-v7s, io-pgtable-dart) which return 0 on error conditions.

In the Linux kernel, the following vulnerability has been resolved: platform/x86/amd: Fix memory leak in wbrf_record() The tmp buffer is allocated using kcalloc() but is not freed if acpi_evaluate_dsm() fails. This causes a memory leak in the error path. Fix this by explicitly freeing the tmp buffer in the error handling path of acpi_evaluate_dsm().

In the Linux kernel, the following vulnerability has been resolved: net/sched: act_ife: avoid possible NULL deref tcf_ife_encode() must make sure ife_encode() does not return NULL. syzbot reported: Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] RIP: 0010:ife_tlv_meta_encode+0x41/0xa0 net/ife/ife.c:166 CPU: 3 UID: 0 PID: 8990 Comm: syz.0.696 Not tainted syzkaller #0 PREEMPT(full) Call Trace: <TASK> ife_encode_meta_u32+0x153/0x180 net/sched/act_ife.c:101 tcf_ife_encode net/sched/act_ife.c:841 [inline] tcf_ife_act+0x1022/0x1de0 net/sched/act_ife.c:877 tc_act include/net/tc_wrapper.h:130 [inline] tcf_action_exec+0x1c0/0xa20 net/sched/act_api.c:1152 tcf_exts_exec include/net/pkt_cls.h:349 [inline] mall_classify+0x1a0/0x2a0 net/sched/cls_matchall.c:42 tc_classify include/net/tc_wrapper.h:197 [inline] __tcf_classify net/sched/cls_api.c:1764 [inline] tcf_classify+0x7f2/0x1380 net/sched/cls_api.c:1860 multiq_classify net/sched/sch_multiq.c:39 [inline] multiq_enqueue+0xe0/0x510 net/sched/sch_multiq.c:66 dev_qdisc_enqueue+0x45/0x250 net/core/dev.c:4147 __dev_xmit_skb net/core/dev.c:4262 [inline] __dev_queue_xmit+0x2998/0x46c0 net/core/dev.c:4798

In the Linux kernel, the following vulnerability has been resolved: uacce: ensure safe queue release with state management Directly calling `put_queue` carries risks since it cannot guarantee that resources of `uacce_queue` have been fully released beforehand. So adding a `stop_queue` operation for the UACCE_CMD_PUT_Q command and leaving the `put_queue` operation to the final resource release ensures safety. Queue states are defined as follows: - UACCE_Q_ZOMBIE: Initial state - UACCE_Q_INIT: After opening `uacce` - UACCE_Q_STARTED: After `start` is issued via `ioctl` When executing `poweroff -f` in virt while accelerator are still working, `uacce_fops_release` and `uacce_remove` may execute concurrently. This can cause `uacce_put_queue` within `uacce_fops_release` to access a NULL `ops` pointer. Therefore, add state checks to prevent accessing freed pointers.

In the Linux kernel, the following vulnerability has been resolved: platform/x86: hp-bioscfg: Fix kernel panic in GET_INSTANCE_ID macro The GET_INSTANCE_ID macro that caused a kernel panic when accessing sysfs attributes: 1. Off-by-one error: The loop condition used '<=' instead of '<', causing access beyond array bounds. Since array indices are 0-based and go from 0 to instances_count-1, the loop should use '<'. 2. Missing NULL check: The code dereferenced attr_name_kobj->name without checking if attr_name_kobj was NULL, causing a null pointer dereference in min_length_show() and other attribute show functions. The panic occurred when fwupd tried to read BIOS configuration attributes: Oops: general protection fault [#1] SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] RIP: 0010:min_length_show+0xcf/0x1d0 [hp_bioscfg] Add a NULL check for attr_name_kobj before dereferencing and corrects the loop boundary to match the pattern used elsewhere in the driver.

In the Linux kernel, the following vulnerability has been resolved: can: kvaser_usb: kvaser_usb_read_bulk_callback(): fix URB memory leak Fix similar memory leak as in commit 7352e1d5932a ("can: gs_usb: gs_usb_receive_bulk_callback(): fix URB memory leak"). In kvaser_usb_set_{,data_}bittiming() -> kvaser_usb_setup_rx_urbs(), the URBs for USB-in transfers are allocated, added to the dev->rx_submitted anchor and submitted. In the complete callback kvaser_usb_read_bulk_callback(), the URBs are processed and resubmitted. In kvaser_usb_remove_interfaces() the URBs are freed by calling usb_kill_anchored_urbs(&dev->rx_submitted). However, this does not take into account that the USB framework unanchors the URB before the complete function is called. This means that once an in-URB has been completed, it is no longer anchored and is ultimately not released in usb_kill_anchored_urbs(). Fix the memory leak by anchoring the URB in the kvaser_usb_read_bulk_callback() to the dev->rx_submitted anchor.

In the Linux kernel, the following vulnerability has been resolved: crypto: authencesn - reject too-short AAD (assoclen<8) to match ESP/ESN spec authencesn assumes an ESP/ESN-formatted AAD. When assoclen is shorter than the minimum expected length, crypto_authenc_esn_decrypt() can advance past the end of the destination scatterlist and trigger a NULL pointer dereference in scatterwalk_map_and_copy(), leading to a kernel panic (DoS). Add a minimum AAD length check to fail fast on invalid inputs.