CVE Database

In the Linux kernel, the following vulnerability has been resolved: net: dsa: bcm_sf2: bound the CFP rule dump by the caller's buffer size bcm_sf2_cfp_rule_get_all() walks the whole cfp.unique bitmap into rule_locs[] without consulting nfc->rule_cnt, which is how many entries the caller had room for. ETHTOOL_GRXCLSRLALL requires no CAP_NET_ADMIN and the ioctl sizes the buffer from the rule_cnt userspace passes in, so once an admin has installed CFP rules any user can ask for fewer slots than there are rules and run off the end of the allocation. A rule_cnt of 0 leaves the buffer pointer NULL and the walk dereferences it.

In the Linux kernel, the following vulnerability has been resolved: eth: nfp: bound the ntuple rule dump by the caller's buffer size nfp_net_get_fs_loc() dumps every entry of nn->fs.list into rule_locs[] without consulting cmd->rule_cnt, which is how many entries the caller had room for. ETHTOOL_GRXCLSRLALL requires no CAP_NET_ADMIN and the ioctl sizes the buffer from the rule_cnt userspace passes in, so once an admin has installed flow steering rules any user can ask for fewer slots than there are rules and run off the end of the allocation. A rule_cnt of 0 leaves the buffer pointer NULL and the walk dereferences it. Bail out with -EMSGSIZE when the buffer fills up, the way the other ntuple capable drivers do, and report how many locations were filled so a shrinking rule list does not leave the caller reading stale slots.

In the Linux kernel, the following vulnerability has been resolved: net: dsa: mv88e6xxx: bound the policy rule dump by the caller's buffer size mv88e6xxx_get_rxnfc() uses rxnfc->rule_cnt as the write index while dumping the policy IDR, clobbering the input value before it has been looked at. That input is the number of entries the caller had room for. ETHTOOL_GRXCLSRLALL requires no CAP_NET_ADMIN and the ioctl sizes the buffer from the rule_cnt userspace passes in, so once an admin has installed policy rules any user can ask for fewer slots than there are rules and run off the end of the allocation. A rule_cnt of 0 leaves the buffer pointer NULL and the walk dereferences it. Count into a local so the caller's limit survives the walk, and stop with -EMSGSIZE once it is reached.

In the Linux kernel, the following vulnerability has been resolved: vxlan: reject dynamic fdb entries that reference a nexthop id The commit cited in the Fixes tag allowed VXLAN FDB entries to point to FDB nexthops so that overlay traffic could be load balanced across multiple VTEPs. Such entries can only be configured from user space, cannot be learned and cannot roam. They only make sense with a user space control plane such as E-VPN where data plane learning is disabled. Despite that, the VXLAN driver does not currently prevent such entries from being configured with the "dynamic" flag. The per-nexthop FDB list is only protected by the per-device hash lock, which is not sufficient when two VXLAN devices point to the same FDB nexthop and therefore share the list. Aging runs in softirq context without RTNL, so an entry deleted by one device can race with an addition or deletion from the other, leading to list corruption: list_del corruption. next->prev should be ffff8881069d9548, but was dead000000000122. (next=ffff8881069d9448) WARNING: CPU: 0 PID: 90 at lib/list_debug.c:65 __list_del_entry_valid_or_report+0x1aa/0x210 ... vxlan_fdb_destroy+0x5b8/0xad0 vxlan_cleanup+0x328/0x450 call_timer_fn+0x2a/0x1c0 run_timer_softirq+0x18c/0x210 BUG: KASAN: slab-use-after-free in vxlan_fdb_destroy Fix this by rejecting the bogus configuration of dynamic FDB entries that point to FDB nexthops, both when created and when an existing entry is updated. As such, the per-nexthop FDB list is only ever mutated under the RTNL lock. Add test cases to make sure that this does not regress in the future.

In the Linux kernel, the following vulnerability has been resolved: net/sched: defer qdisc freeing after failed creation An RTM_NEWQDISC request can make clsact bind a populated shared ingress block during ->init(), publishing an embedded mini_Qdisc to lockless readers. If the same request has an invalid TCA_RATE, estimator setup fails after ->init(); the unwind removes the pointer but synchronously frees its containing qdisc while tc_run() may still hold it. Retire failed qdiscs through the same RCU helper as normal destruction. Inline the synchronous free into the callback now that no direct callers remain.

In the Linux kernel, the following vulnerability has been resolved: iommu/amd: Fix ineffective error check in nested domain allocation amd_iommu_pdom_id_alloc() returns an int: a domain ID on success, or the negative errno from ida_alloc_range() when the ID space is exhausted or memory is short. amd_iommu_alloc_domain_nested() stores that return value in gdom_info->hdom_id, which is a u32, and only then tests it: gdom_info->hdom_id = amd_iommu_pdom_id_alloc(); if (gdom_info->hdom_id <= 0) { The assignment discards the sign, so -ENOSPC becomes 0xffffffe4 and the test never fires. The nested domain is then set up with a host domain ID that was never allocated, instead of the allocation failing with -ENOSPC. Keep the value in an int, test it there, and store it only once it is known to be valid, which is what the other amd_iommu_pdom_id_alloc() callers already do.

In the Linux kernel, the following vulnerability has been resolved: vdpa_sim_blk: reject out-of-range sector starts vdpasim_blk_check_range() logs an invalid start sector but continues validating the request. The subsequent unsigned capacity subtraction can underflow and let an out-of-range buffer offset reach the data path. The invalid offset is used by three request paths. VIRTIO_BLK_T_OUT copies guest data to blk->buffer + offset through vringh_iov_pull_iotlb(), causing an out-of-bounds write in _copy_from_iter() or memcpy(). VIRTIO_BLK_T_IN copies from blk->buffer + offset to the guest through vringh_iov_push_iotlb(), causing an out-of-bounds read in _copy_to_iter(). VIRTIO_BLK_T_WRITE_ZEROES passes blk->buffer + offset to memset(), causing an out-of-bounds write. Reject starts at or beyond the capacity before the subtraction. Treat the capacity boundary as invalid because the IN and OUT paths round byte counts down to sectors for validation but later copy the original byte counts. A sub-sector request at the capacity boundary would otherwise still access past the end of the buffer. I found this bug myself, though the patch was written with AI assistance.

In the Linux kernel, the following vulnerability has been resolved: vdpa_sim_net: check TX pull result before RX copy vringh_iov_pull_iotlb() returns a signed byte count. A failed TX pull is currently added to the unsigned byte counter and then passed as a size_t length to receive_filter() and vringh_iov_push_iotlb(). A negative error can therefore become a large length in the RX path. Handle non-positive pull results before every length use. Count the TX error and complete the consumed TX descriptor with zero bytes. I found this bug myself, though the patch was written with AI assistance.

In the Linux kernel, the following vulnerability has been resolved: nstree: check listing permission before taking a namespace reference legitimize_ns() takes a reference on the candidate namespace before may_list_ns() has decided whether the caller may see it. The __free(ns_put) cleanup on the denied path can drop the last reference to a mount namespace while we still hold the rcu read lock, and put_mnt_ns() may sleep there. This is the same problem commit 2ec2aff3c8e2 ("ns: make sure reference are dropped outside of rcu lock") fixed for the put_user() path. Neither ns_requested() nor may_list_ns() needs a reference, both only look at the namespace type and at the caller's own namespaces, so do the checks first and take the reference last. Splat: Voluntary context switch within RCU read-side critical section! WARNING: kernel/rcu/tree_plugin.h:332 at rcu_note_context_switch+0x238/0x2a0, CPU#5: a/3442 CPU: 5 UID: 1000 PID: 3442 Comm: a Not tainted 7.0.0-30-generic #30-Ubuntu PREEMPT(lazy) RIP: 0010:rcu_note_context_switch+0x238/0x2a0 Call Trace: <TASK> __schedule+0xcf/0x650 schedule+0x27/0x90 schedule_preempt_disabled+0x15/0x30 __mutex_lock.constprop.0+0x550/0xaf0 __mutex_lock_slowpath+0x13/0x20 mutex_lock+0x3b/0x50 exp_funnel_lock+0xb2/0x260 synchronize_rcu_expedited+0xe7/0x220 namespace_unlock+0x26a/0x320 put_mnt_ns+0xd3/0x120 mntns_put+0xe/0x20 do_listns+0x13e/0x560 __do_sys_listns+0x126/0x2d0 __x64_sys_listns+0x20/0x30 x64_sys_call+0x2366/0x2390 do_syscall_64+0x105/0x5a0 entry_SYSCALL_64_after_hwframe+0x76/0x7e </TASK>

In the Linux kernel, the following vulnerability has been resolved: net: hinic: fix mailbox segment buffer overflow check_mbox_seq_id_and_seg_len() validates that seq_id does not exceed SEQ_ID_MAX_VAL (42) and seg_len does not exceed MBOX_SEG_LEN (48). However, this allows the last segment (seq_id=42) to carry a full 48-byte payload, writing to offset 42*48=2016 for 48 bytes (ending at byte 2064). The receive buffer is only MBOX_MAX_BUF_SZ (2048) bytes, resulting in a 16-byte heap buffer overflow. The hinic3 driver already handles this correctly by defining MBOX_LAST_SEG_MAX_LEN and rejecting the last segment when it exceeds the remaining buffer space. Apply the same fix to the hinic driver.

In the Linux kernel, the following vulnerability has been resolved: net: stmmac: fix TX descriptor availability check for TSO traffic stmmac_tso_xmit() estimates the number of free TX descriptors required by a TSO skb as: (skb->len - proto_hdr_len) / TSO_MAX_BUFF_SIZE + 1 which assumes the payload is split into TSO_MAX_BUFF_SIZE chunks. This underestimates the descriptors actually consumed by stmmac_tso_allocator(), since each fragment is mapped individually and so it needs at least one descriptor regardless of its size. Moreover, one descriptor is used for the L2/L3/L4 headers and, when the MSS changes, one more is consumed for the MSS context descriptor. For a highly fragmented TSO skb the check can therefore pass even when the ring has too few free slots. stmmac_tso_allocator() then writes past the available descriptors, overwriting descriptors still owned by the DMA engine, corrupting the TX ring. Add stmmac_tso_get_num_desc() to compute the exact number of descriptors needed for the header, the linear payload and each fragment, plus the MSS context descriptor when required, and use it in the availability check.

In the Linux kernel, the following vulnerability has been resolved: mm/slab: take n->list_lock in __slab_try_return_freelist() to avoid race Commit ba7425312607 ("mm, slab: add an optimistic __slab_try_return_freelist()") incorrectly assumed that nobody has freed an object to the slab as long as slab->freelist is NULL and cmpxchg succeeds. However, as reported by Hyunwoo Kim [1], other CPUs might have freed an object to the slab, insert the slab to the partial list, then allocated an object from the slab, and be in the middle of removing the slab from the list under n->list_lock. Since __refill_objects_node() puts the slab back on pc.slabs outside n->list_lock, it might insert the slab into that list while the slab is concurrently being removed from n->partial. This led to a list corruption [1]: list_add corruption. next->prev should be prev (ffff888100000248), but was dead000000000122. (next=ffffea000416e410). kernel BUG at lib/list_debug.c:29! Oops: invalid opcode: 0000 [#1] SMP NOPTI CPU: 1 UID: 65534 PID: 144 Comm: poc Not tainted 7.2.0-16172-gcf72cbb39da8-dirty #1 PREEMPT(lazy) RIP: 0010:__list_add_valid_or_report+0x80/0xd0 ... Call Trace: alloc_from_new_slab+0x183/0x300 ___slab_alloc+0x31c/0x890 __kmalloc_noprof+0x3d4/0x800 lsm_blob_alloc+0x2d/0x50 security_msg_msg_alloc+0x26/0x90 load_msg+0x1aa/0x210 do_msgsnd+0x91/0x800 do_syscall_64+0x109/0x5d0 entry_SYSCALL_64_after_hwframe+0x77/0x7f ... Kernel panic - not syncing: Fatal exception This is a classic ABA problem where cmpxchg succeeds but the state has changed since __refill_objects_node() took the freelist from the slab. As Vlastimil Babka mentioned [2], it should be rare to return more than one slab (due to the racy read of slab->counters in get_partial_node_bulk()). Therefore, instead of introducing additional complexity, acquire and release n->list_lock twice in the worst case. Return the slab directly to the partial list and hold n->list_lock across the cmpxchg and add_partial(). This is similar to the initial version of commit ba7425312607 [3]. This is enough to avoid the race as the list manipulation is serialized by n->list_lock. While at it, bring back unlikely() hint now that the condition is unlikely.

In the Linux kernel, the following vulnerability has been resolved: ipv6: fix fib6 walker UAF on seq stop ipv6_route_iter_active() treats a walker in FWS_U at the table root as already unlinked. fib6_del_route() can move a still-linked walker into that same state when the current leaf is the last route at the root, so ipv6_route_native_seq_stop() skips fib6_walker_unlink(). The seq private object can then be freed while it remains on net->ipv6.fib6_walkers. A later route deletion walks the dangling list and uses the freed walker. Use the list head as membership state and reinitialize it when unlinking. Keep the existing w->node check so a never-started iterator with a zeroed private object is not treated as linked. The same stop helper is used by /proc/net/ipv6_route and by the BPF ipv6_route iterator. The BPF show path only widens the race.

In the Linux kernel, the following vulnerability has been resolved: ftrace: fork: Initialize function graph state before copy_exec_state() dup_task_struct() copies the parent's task_struct, including ret_stack. ftrace_graph_init_task() clears the copied function graph state, but it currently runs after copy_exec_state(). For non-CLONE_VM forks, copy_exec_state() allocates a new task_exec_state. If that allocation fails, copy_process() reaches bad_fork_free and free_task() calls ftrace_graph_exit_task(). Since the child still carries the parent's ret_stack pointer, the unwind frees the parent's active function graph return stack. The parent subsequently accesses freed memory from function_graph_enter_regs(). KASAN reports: [ 22.190920] ================================================================== [ 22.195899] BUG: KASAN: slab-use-after-free in function_graph_enter_regs+0xa76/0xb90 [ 22.200747] Write of size 8 at addr ff110000054dc0a8 by task repro/1 [ 22.205134] [ 22.210770] CPU: 0 UID: 0 PID: 1 Comm: repro Not tainted 7.2.0-07732-g9328b3b03bdc-dirty #3 PREEMPT(lazy) [ 22.212576] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 22.213750] Call Trace: [ 22.215271] <TASK> [ 22.216242] ? ftrace_stub_direct_tramp+0x10/0x10 [ 22.217774] dump_stack_lvl+0x4e/0x70 [ 22.220531] print_report+0x157/0x4b4 [ 22.223202] ? fixup_red_left+0x9/0x30 [ 22.224407] ? complete_report_info+0x83/0x110 [ 22.226679] ? function_graph_enter_regs+0xa76/0xb90 [ 22.228084] kasan_report+0xce/0x100 [ 22.230109] ? function_graph_enter_regs+0xa76/0xb90 [ 22.232860] ? stack_trace_save+0x4/0xd0 [ 22.234156] function_graph_enter_regs+0xa76/0xb90 [ 22.236090] ? kasan_save_stack+0x30/0x50 [ 22.237752] ? __pfx_function_graph_enter_regs+0x10/0x10 [ 22.238694] ? ring_buffer_lock_reserve+0x345/0xf80 [ 22.239628] ? stack_trace_save+0x4/0xd0 [ 22.242121] ? stack_trace_save+0x4/0xd0 [ 22.243588] ftrace_graph_func+0xda/0x160 [ 22.245362] ? ftrace_stub_direct_tramp+0x10/0x10 [ 22.246520] 0xffffffffa0000095 [ 22.250528] ? stack_trace_save+0x9/0xd0 [ 22.251757] ? ring_buffer_unlock_commit+0x11d/0x5c0 [ 22.253152] stack_trace_save+0x9/0xd0 [ 22.254264] kasan_save_stack+0x30/0x50 [ 22.273631] kasan_save_track+0x14/0x30 [ 22.276763] kasan_save_free_info+0x3b/0x70 [ 22.278296] __kasan_slab_free+0x43/0x70 [ 22.280157] kmem_cache_free+0xbf/0x3b0 [ 22.282963] ? ftrace_stub_direct_tramp+0x10/0x10 [ 22.284001] free_task+0xa2/0x160 [ 22.285699] ? ftrace_stub_direct_tramp+0x10/0x10 [ 22.286752] copy_process+0x2aae/0x7bc0 Initialize the child function graph state immediately after dup_task_struct(), before the first fallible operation.

In the Linux kernel, the following vulnerability has been resolved: ALSA: us122l: Prevent write upgrades for read mappings The hwdep mmap callback rejects read-buffer mappings that are initially writable, but leaves VM_MAYWRITE set on mappings created with PROT_READ. A process that can open the hwdep node O_RDWR can later use mprotect() to make the mapping writable. The read allocation begins with struct usb_stream. Its read_size member is used by the fault handler to decide which pages belong to the read buffer. The read VMA intentionally remains expandable because pcm_usb_stream uses mremap() after reading that size. Changing read_size first can therefore map and access pages beyond the allocation. The same member is also consumed by usb_stream_free(), where changing it can make free_pages_exact() release pages outside the allocation. Clear VM_MAYWRITE for read-buffer mappings after rejecting an initially writable VMA. This keeps the separate output-buffer mapping writable while preventing later permission upgrades.

In the Linux kernel, the following vulnerability has been resolved: ufs: validate cylinder group metadata before caching it ufs_read_cylinder() copies the cylinder group index and the rotor positions straight from the on-disk group and caches them without any check: ucpi->c_cgx = fs32_to_cpu(sb, ucg->cg_cgx); ucpi->c_rotor = fs32_to_cpu(sb, ucg->cg_rotor); ucpi->c_frotor = fs32_to_cpu(sb, ucg->cg_frotor); ucpi->c_irotor = fs32_to_cpu(sb, ucg->cg_irotor); They are then used as indices during allocation and free: - c_cgx indexes the cylinder summary array as UFS_SB(sb)->fs_cs(ucpi->c_cgx), so a value past s_ncg writes a 32 bit count outside the s_csp allocation. - c_frotor becomes a bitmap scan start, start = c_frotor >> 3, and then length = ((s_fpg + 7) >> 3) - start. A start beyond the block bitmap wraps the unsigned length to a huge value, so ubh_scanc() walks far past the cylinder group buffers. c_irotor drives the inode bitmap the same way. A crafted image can set any of these freely, turning an ordinary allocation into an out of bounds access. Reject a cylinder group whose recorded index does not match the group being read, or whose rotors fall outside the group, before the metadata is cached. Valid filesystems keep cg_cgx equal to the group number and the rotors within the group, so only malformed images are rejected.

In the Linux kernel, the following vulnerability has been resolved: accel: ethosu: Ensure SRAM region size matches job It is possible for userspace to set the job SRAM size to 0, but then still have SRAM accesses in the command stream. When the job SRAM size is 0, setting the region base register is skipped and a stale base address from a prior job is used. Check the region size against the job's SRAM size instead of just the size of the SRAM. The job's SRAM size was already checked against the total SRAM size.

In the Linux kernel, the following vulnerability has been resolved: ASoC: sprd: validate compress buffer sizes against fixed allocations sprd_platform_compr_open() allocates the stage 0 IRAM buffer (32K data area) and the stage 1 DDR buffer (2M data area) with fixed sizes, but sprd_platform_compr_copy() derives all copy lengths from the user controlled runtime->fragment_size and the write() count, never comparing them against the physical buffer sizes. The compress core only checks fragment_size * fragments for an u32 overflow in snd_compress_check_input(), so a local user can configure a logical buffer of up to ~4GB via SNDRV_COMPRESS_SET_PARAMS, far exceeding the fixed allocations. A fragment_size larger than the 32K IRAM data area makes the stage 0 copy_from_user() overflow past the IRAM allocation, and a buffer_size larger than the 2M DDR buffer makes the wrapping copy at the end of sprd_platform_compr_copy() write fully user controlled data past the buffer. No SNDRV_PCM_TRIGGER_START is needed, a write() in SETUP state reaches the copy callback directly. Reject parameters that do not fit into the fixed buffers in set_params(), and fix the advertised max fragment size: 128K never fitted into the 32K IRAM buffer. The caps values may have been carried over from the qdsp6 driver, which allocates its buffers according to the advertised maxima, unlike this driver. With 32K as max fragment size the advertised limits are self-consistent: 32K * 64 = 2M equals the DDR buffer size. Discovered by Atuin - Automated Vulnerability Discovery Engine.

In the Linux kernel, the following vulnerability has been resolved: exit: hold a reference to thread_pid across proc_flush_pid Commit 0a36bad01731 ("release_task: kill the no longer needed get/put_pid(thread_pid)") removed the reference around proc_flush_pid(). It assumed that free_pids(post.pids) at the end of release_task() would keep thread_pid alive until then. That assumption is wrong. __change_pid() only records a detached PID in post.pids when pid_has_task() is false for every PIDTYPE. If another task still uses the exiting task's PID as its process group or session ID, __unhash_process() removes the exiting task's PIDTYPE_PID link but leaves the PID out of post.pids. release_task() therefore holds no reference to it after dropping tasklist_lock. The other task can then remove the remaining PIDTYPE links. Its free_pids() call schedules delayed_put_pid(), and the RCU callback can free the PID before the first release_task() reaches proc_flush_pid(). An unprivileged reproducer races wait4(-1) against setsid() to trigger this ordering. Three of three fresh v7.2 KASAN boots reported: BUG: KASAN: slab-use-after-free in proc_invalidate_siblings_dcache+0x3e2/0x3f0 Read of size 8 by task h7_pid_reaper/1921 Call Trace: proc_invalidate_siblings_dcache release_task wait_consider_task __do_wait do_wait kernel_wait4 Freed by task 0: kmem_cache_free put_pid delayed_put_pid rcu_core Last potentially related work creation: __call_rcu_common free_pids ksys_setsid KASAN identified a 144-byte object from the pid cache and located the bad read 80 bytes into the freed object, matching pid->inodes. With an explicit reference, three of three fresh boots completed without a KASAN report. The concurrent RCU callback dropped its reference while proc_flush_pid() was protected, and the balancing put_pid() performed the final free afterward. Take a reference before __unhash_process() clears p->thread_pid and release it after proc_flush_pid() completes. A tested source reproducer is available privately on request. No controlled read or write, information leak, or privilege escalation is claimed. The mainline patch applies directly to v6.19.y and newer; v6.16.y through v6.18.y need a context-adjusted backport.

Rojo's "rojo serve" HTTP API (default port 34872) has no Host/Origin header validation, making it vulnerable to DNS rebinding. A malicious webpage can read all project source, write malicious code to files on disk, and launch local programs via opener::open() with no user interaction beyond visiting the page.

In the Linux kernel, the following vulnerability has been resolved: net: mpls: clear inner_protocol when the last label is popped skb_mpls_push() records the pre-encapsulation network header once, gated on !skb->inner_protocol. skb_mpls_pop() never clears that record, so it outlives the encapsulation it describes. Open vSwitch can then re-push MPLS onto a packet whose inner_network_header still points at the older, deeper offset: push a label, pop every label, recirculate (ovs_flow_key_update() re-derives key->eth.type and resets network_header, but leaves inner_*), then push again. ovs_fragment() trusts the record: skb->network_header = skb->inner_network_header; so skb_network_offset() goes negative. The bound check is signed: if (skb_network_offset(skb) > MAX_L2_LEN) a negative offset passes it, and prepare_frag() widens the value: unsigned int hlen = skb_network_offset(skb); memcpy(&data->l2_data, skb->data, hlen); which is a ~4GiB memcpy out of a 30-byte per-CPU buffer. Reproduced on v7.3-rc1. RDX is the truncated length, (unsigned int)(-8): BUG: unable to handle page fault for address: ffffe8ffffc16000 #PF: supervisor write access in kernel mode Oops: 0002 [#1] SMP KASAN NOPTI RIP: 0010:memcpy+0x8/0x20 RDX: 00000000fffffff8 RSI: ffff888105d732db RDI: ffffe8ffffc16000 prepare_frag+0x3df/0x4e0 ovs_fragment+0x589/0x7e0 do_output+0x4ce/0x5e0 do_execute_actions+0x55d2/0x7b30 ovs_execute_actions+0xea/0x450 Same root-cause shape as commit 975b5b067f52 ("ipv6: sr: restore network header before routing and forwarding"): a stale network header offset reaching a consumer that widens it. Here it originates in the MPLS push/pop path. Clear inner_protocol once the packet is no longer MPLS, so a later push re-records the current header. net/sched/act_mpls.c is the only other skb_mpls_pop() caller and gets the same fix; sch_frag.c saves and restores inner_protocol around fragmentation in the same way OVS does.

In the Linux kernel, the following vulnerability has been resolved: net: openvswitch: fix use-after-free of the flow table mask array tbl_mask_array_realloc() retires the old mask_array before it stops being reachable: old = ovsl_dereference(tbl->mask_array); if (old) { ... call_rcu(&old->rcu, mask_array_rcu_cb); } rcu_assign_pointer(tbl->mask_array, new); call_rcu() only waits for read-side critical sections already in flight. tbl->mask_array still points at old between the call_rcu() and the rcu_assign_pointer(), so a reader entering ovs_flow_tbl_lookup_stats() in that window picks up old in a fresh critical section that the pending grace period does not cover. tbl_mask_array_realloc() runs in process context under ovs_mutex, so the window is preemptible and can outlast the grace period. Then mask_array_rcu_cb() frees old before the swap runs: BUG: KASAN: slab-use-after-free in flow_lookup.constprop.0+0x2bf/0x2f0 Read of size 8 at addr ffff888020b3e018 by task poc/741 flow_lookup.constprop.0+0x2bf/0x2f0 ovs_flow_tbl_lookup_stats+0x4a3/0x5c0 ovs_dp_process_packet+0x19c/0x710 ovs_vport_receive+0x243/0x390 internal_dev_xmit+0x81/0x170 Freed by task 728: kfree+0x16a/0x4e0 rcu_core+0x853/0x1030 Publish the new array before retiring the old one. The kfree_rcu() that call_rcu() replaced ran after the swap.

In the Linux kernel, the following vulnerability has been resolved: netfilter: cttimeout: prevent UAF during module unload nf_ct_set_timeout() protects the timeout hook dereference and policy lookup with rcu_read_lock(). cttimeout_exit(), however, unregisters the per-net operations before it clears the hook. This allows the following interleaving: CPU 0 CPU 1 cttimeout_exit() nf_ct_set_timeout() unregister_pernet_subsys() rcu_read_lock() kfree(pernet) h = nf_ct_timeout_hook h->timeout_find_get() nfct_timeout_pernet() The hook still points to ctnl_timeout_find_get() when CPU 1 looks up the already freed per-net timeout list. KASAN reported: BUG: KASAN: slab-use-after-free in ctnl_timeout_find_get Read of size 8 by task poc/90 Call Trace: ctnl_timeout_find_get+0x271/0x2a0 [nfnetlink_cttimeout] nf_ct_set_timeout+0x7b/0x3c0 xt_ct_tg_check+0x724/0xb20 xt_check_target+0x234/0xa90 do_ipt_set_ctl+0x570/0x1270 Allocated by task 89: __kmalloc_noprof+0x16e/0x460 ops_init+0x6d/0x420 register_pernet_operations+0x2f6/0x670 Freed by task 91: kfree+0x131/0x390 ops_undo_list+0x3d4/0x730 unregister_pernet_operations+0x232/0x490 unregister_pernet_subsys+0x1c/0x30 cttimeout_exit+0x52/0x970 [nfnetlink_cttimeout] Clear the hook and wait for existing readers before unregistering the per-net operations. This blocks new policy lookups and ensures readers that observed the hook finish before the per-net storage is freed.

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_log: unregister loggers before per-net teardown nf_log_syslog and nfnetlink_log unregister their per-network namespace operations before unregistering their global logger backends. This leaves a window where a sysctl or netlink writer can rebind the still- registered logger after the per-net pre-exit callback cleared the old selection. The race looks like this: CPU 0 CPU 1 ---- ---- unregister_pernet_subsys() nf_log_unset(net, logger) net->nf.nf_loggers[pf] = NULL lock nf_log_mutex find logger in loggers[][] net->nf.nf_loggers[pf] = logger unlock nf_log_mutex nf_log_unregister(logger) lock nf_log_mutex loggers[pf][type] = NULL unlock nf_log_mutex synchronize_rcu() module exit returns module core frees backend memory Later, a sysctl read or packet logging operation can dereference the stale per-net logger pointer. Fix this by unregistering the global logger backends before tearing down per-net state. Once the global registrations are gone, later writers can no longer rebind the logger. unregister_pernet_subsys() already waits for an RCU grace period after the pre-exit callback clears the per-net selection, while nf_log_unregister() continues to cover readers of the global logger table. Apply this ordering fix to both nf_log backends that combine per-net teardown with global logger registration.

In the Linux kernel, the following vulnerability has been resolved: inet: frags: invalidate queues before flushing them fqdir_pre_exit() flushes the skbs from incomplete queues without changing their completion state. A fragment which found a queue before high_thresh was cleared can then acquire the queue lock and reuse stale reassembly metadata. A queue concurrently killed after fqdir->dead is set can instead become INET_FRAG_COMPLETE|INET_FRAG_HASH_DEAD while still holding its old skbs; skipping it because it is complete leaves those references behind until asynchronous fqdir teardown. For IPv6, stale metadata can make ip6_frag_reasm() use the old nhoffset with a new skb and access memory out of bounds. The resulting heap corruption can be leveraged for local privilege escalation when unprivileged network namespaces are available. Unflushed fragments can also keep conntrack references alive after the conntrack per-net cleanup point. Kill each incomplete queue, then flush every queue still owned by the dying rhashtable. HASH_DEAD identifies that ownership, while complete queues without it are already owned by another destroy path and must be left alone. Releasing a timer reference removed by inet_frag_kill() is deferred to inet_frag_putn(), after the queue lock is dropped. KASAN report: BUG: KASAN: slab-out-of-bounds in ipv6_frag_rcv (net/ipv6/reassembly.c:289 (discriminator 2) net/ipv6/reassembly.c:229 (discriminator 2) net/ipv6/reassembly.c:391 (discriminator 2)) Write of size 1 at addr ff110001039c6e00 by task poc/771 Call Trace: ? ipv6_frag_rcv (net/ipv6/reassembly.c:289 (discriminator 2) net/ipv6/reassembly.c:229 (discriminator 2) net/ipv6/reassembly.c:391 (discriminator 2)) ipv6_frag_rcv (net/ipv6/reassembly.c:289 (discriminator 2) net/ipv6/reassembly.c:229 (discriminator 2) net/ipv6/reassembly.c:391 (discriminator 2)) ip6_protocol_deliver_rcu (net/ipv6/ip6_input.c:479 (discriminator 5)) ip6_input_finish (net/ipv6/ip6_input.c:534) ipv6_rcv (include/net/dst.h:480 (discriminator 3) net/ipv6/ip6_input.c:119 (discriminator 3) net/ipv6/ip6_input.c:109 (discriminator 3) include/linux/netfilter.h:325 (discriminator 3) include/linux/netfilter.h:319 (discriminator 3) net/ipv6/ip6_input.c:351 (discriminator 3)) packet_sendmsg (net/packet/af_packet.c:3110 net/packet/af_packet.c:3142) __x64_sys_sendmmsg (net/socket.c:2883 net/socket.c:2880 net/socket.c:2880) The buggy address belongs to the object at ff110001039c6b40 which belongs to the cache skbuff_small_head of size 704 The buggy address is located 0 bytes to the right of allocated 704-byte region [ff110001039c6b40, ff110001039c6e00) BUG: KASAN: slab-out-of-bounds in ip6_protocol_deliver_rcu (net/ipv6/ip6_input.c:423 (discriminator 1)) Read of size 1 at addr ff110001039c6e08 by task poc/771 Call Trace: ? ip6_protocol_deliver_rcu (net/ipv6/ip6_input.c:423 (discriminator 1)) ip6_protocol_deliver_rcu (net/ipv6/ip6_input.c:423 (discriminator 1)) ip6_input_finish (net/ipv6/ip6_input.c:534) ipv6_rcv (include/net/dst.h:480 (discriminator 3) net/ipv6/ip6_input.c:119 (discriminator 3) net/ipv6/ip6_input.c:109 (discriminator 3) include/linux/netfilter.h:325 (discriminator 3) include/linux/netfilter.h:319 (discriminator 3) net/ipv6/ip6_input.c:351 (discriminator 3)) packet_sendmsg (net/packet/af_packet.c:3110 net/packet/af_packet.c:3142) __x64_sys_sendmmsg (net/socket.c:2883 net/socket.c:2880 net/socket.c:2880) packet_sendmsg (net/packet/af_packet.c:2959 net/packet/af_packet.c:3053 net/packet/af_packet.c:3142) __x64_sys_sendmmsg (net/socket.c:2883 net/socket.c:2880 net/socket.c:2880) The buggy address belongs to the object at ff110001039c6b40 which belongs to the cache skbuff_small_head of size 704 The buggy address is located 8 bytes to the right of allocated 704-byte region [ff110001039c6b40, ff110001039c6e00)

In the Linux kernel, the following vulnerability has been resolved: mac802154: fix use-after-free of sdata via queued RX frames The RX softirq producer ieee802154_subif_frame() queues received beacon and MAC-command frames onto local->rx_beacon_list / rx_mac_cmd_list and schedules a process-context worker, storing a raw mac_pkt->sdata (and skb->dev == sdata->dev) with neither a reference nor any locking: - the lists have no lock: the softirq producer list_add_tail()s while the mac_wq worker list_del()s, so sibling interfaces on the same phy corrupt the list; - the workers dereference the interface after it may have been freed. mac802154_rx_mac_cmd_worker() touches mac_pkt->sdata directly, and mac802154_rx_beacon_worker() -> mac802154_process_beacon() dereferences skb->dev (== sdata->dev). Removing an interface frees its sdata (netdev_priv) while a queued frame still points at it, so a later worker run is a use-after-free. Reproduced under KASAN by flooding a victim interface with MAC command frames and removing it (the beacon path is the same class via skb->dev): BUG: KASAN: slab-use-after-free in mac802154_rx_mac_cmd_worker+0x463/0x630 [mac802154] Read of size 4 at addr ffff888002f9ea18 by task kworker/u8:1/31 Workqueue: phy0-mac-cmds mac802154_rx_mac_cmd_worker [mac802154] Call Trace: mac802154_rx_mac_cmd_worker+0x463/0x630 [mac802154] process_one_work+0x611/0xe80 worker_thread+0x52e/0xdc0 kthread+0x30c/0x630 ret_from_fork+0x2fd/0x3e0 Fix both lists together: - add local->rx_lock and take it around every list access: the softirq producer (plain spin_lock, softirq context) and the workers and flush (spin_lock_bh, process context); - pin the interface for the lifetime of a queued frame with netdev_hold()/netdev_put(), so the worker can safely dereference sdata / skb->dev even while the interface is being removed; - dequeue under the lock at the head and loop-drain the whole list in the workers (they previously processed one frame per run and relied on a later enqueue to drain the rest); - drop not-yet-started frames of an interface before it is unregistered, from ieee802154_if_remove() (after the RCU grace period) and from the ieee802154_remove_interfaces() loop -- the latter is the whole-phy teardown path, which does not go through ieee802154_if_remove(). An in-flight worker that already dequeued a frame keeps its own netdev reference; unregister_netdevice() then waits it out in netdev_run_todo(), which runs at rtnl_unlock() (rtnl released) and after the interface has been closed, so it does not pin rtnl. A worker blocked in an association TX only delays that one interface's unregister (the usual "waiting for %s to become free"), it does not hold rtnl. netdev_hold() is used for this reason instead of a cancel_work_sync() under rtnl, which would block on the worker's unbounded MLME TX wait via ieee802154_sync_queue(). The mac-command worker additionally skips processing for a stopped interface (ieee802154_sdata_running()), avoiding a needless association response during teardown.

In the Linux kernel, the following vulnerability has been resolved: landlock: Fix use-after-free of the source's parent directory current_check_refer_path() reads old_dentry->d_parent without holding a reference nor a lock on it, and then dereferences it in collect_domain_accesses() and in the audit record. A reference on a child does not pin its parent: __d_move() reassigns dentry->d_parent and drops the reference the child held on its former parent. hook_path_rename() is not affected because the rename path calls lock_rename() before the hook, so the source cannot be reparented under it. hook_path_link() has no such protection: filename_linkat() holds a reference on the source dentry but neither locks nor references its parent, so a concurrent rename(2) can reparent the source while security_path_link() runs, and the former parent can then be removed and freed while the hook walks it. A process can trigger this after entering a Landlock domain that handles at least one filesystem access right. The process can then race a linkat(2) loop against rename(2) and rmdir(2): BUG: KASAN: slab-use-after-free in collect_domain_accesses+0x278/0x290 Read of size 4 at addr ffff888160bd53f4 by task llrepro2/549 collect_domain_accesses+0x278/0x290 current_check_refer_path+0x952/0x1120 security_path_link+0x1be/0x320 filename_linkat+0x342/0x6d0 __x64_sys_linkat+0xfa/0x150 Freed by task 562: kmem_cache_free+0x139/0x4c0 i_callback+0x4b/0x80 rcu_core+0x7dc/0x10a0 Take a reference on the dentry selected as the source parent, using dget() for the common-mount-root case and dget_parent() otherwise. Release it after the hierarchy walk and synchronous audit logging. [mic: Clarify the caller, reachability, and reference handling]

In the Linux kernel, the following vulnerability has been resolved: s390/crypto: Fix wrong return code to engine in asynch callbacks When crypto_finalize_hash_request() or crypto_finalize_skcipher_request() explicitly completes a request, the do_one_request callback must return 0 to indicate successful handling. Returning a negative error code causes the crypto engine to assume the driver failed to take ownership and triggers a second completion via crypto_request_complete(), resulting in a double completion. This pattern occurs in paes_s390.c 4 times and once in phmac_s390.c. Fixed in phmac_do_one_request() and all four paes do_one_request callbacks (ecb, cbc, ctr, xts) by returning 0 after explicit finalization instead of propagating the error code.

In the Linux kernel, the following vulnerability has been resolved: afs: Fix incorrect free in candidate cleanup in afs_lookup_server() Fix afs_lookup_server() to not free an existing server's endpoint state when cleaning up a candidate server. The candidate record doesn't have an endpoint state yet at this point, so the free for that can just be removed.

In the Linux kernel, the following vulnerability has been resolved: afs: Clear stale peer app data after address list changes afs_fs_probe_fileserver() fetches the current endpoint state under server->fs_lock, but leaves old_alist as NULL. Consequently, afs_set_peer_appdata() treats every address list replacement as initial setup and only binds the new peers; it never unbinds peers removed from the old list. An address refresh can therefore proceed as follows. CPU 0 replaces server S's list and drops Pold without clearing Pold->app_data. The server destroyer then clears only S's current peers and lets S reach its RCU callback. After the callback frees S, CPU 1 handles a callback through an RxRPC connection that still pins Pold, reads Pold->app_data, and calls afs_use_server() on the freed object. KASAN reported: BUG: KASAN: slab-use-after-free in afs_find_server+0x3c/0xa0 Read of size 4 at addr ffff8881013e1af0 by task krxrpcio/7001/74 Call Trace: afs_find_server+0x3c/0xa0 afs_rx_new_call+0x15c/0x390 rxrpc_new_incoming_call+0x97c/0x1730 rxrpc_input_packet.constprop.0+0xd03/0xec0 rxrpc_io_thread+0x967/0x1640 Allocated by task 93: afs_lookup_server+0x1a7/0x14c0 afs_alloc_server_list+0x43f/0xb60 afs_create_volume+0x923/0x1490 afs_get_tree+0x1c6/0x10a0 Freed by task 0: kfree+0x131/0x3c0 rcu_core+0x50a/0x1850 Last potentially related work creation: __call_rcu_common.constprop.0+0x71/0xa10 afs_put_server+0x213/0x2b0 Preserve old->addresses for the peer app-data update so that removed peers are cleared before the endpoint state is replaced. Also advance both cursors when the old and new lists share a peer; activating the old/new comparison without this would otherwise loop forever on the shared entry.