CVE Database

The Invoice Generator plugin for WordPress is vulnerable to Account Takeover via Password Reset in all versions up to, and including, 1.0.0. This is due to the `pravel_invoice_change_password()` function being registered as a nopriv AJAX handler with no nonce verification and no authorization check, and performing a loose equality comparison between the supplied `reset_activation_code` POST parameter and the target user's stored `forgot_email` user meta — a check that trivially evaluates to true (`'' == ''`) for any user who has never initiated a forgot-password request, which applies to administrators under normal conditions. This makes it possible for unauthenticated attackers to supply an arbitrary user ID via the `reset_user_id` POST parameter, bypass the activation code check entirely by omitting `reset_activation_code`, and set the target account's password to an attacker-chosen value, enabling full takeover of any account on the site, including administrator accounts.

Multiple OS command injection vulnerabilities exist in the libNetSetObj.so functionality of GeoVision GV-I/O Box 4E 2.09. A specially crafted network packet can lead to command execution. An attacker can send a network request to trigger this vulnerability. `libNetSetObj.so` is an internal library used by various binaries on the device to configure the network stack (start and stop various services, configure IP, Netmask, gateway, dns, etc.) #### CNetSetObj::m_F_n_Set_DNS_Addr command injection The following function can take up to two addresses, performs no sanitization and then calls `system`. This is a classic command injection vulnerability. The function is reachable from both the network-exposed `DVRSearch` service and the `Network.cgi` endpoint. int __fastcall CNetSetObj::m_F_n_Set_DNS_Addr(CNetSetObj *this, char *dns1, char *dns2) { int result; // r0 char v5[80]; // [sp+0h] [bp-50h] BYREF if ( !dns1 ) result = 0; if ( dns1 ) { sprintf(v5, "/bin/echo nameserver %s > /etc/resolv.conf", dns1); // attacker controlled dns1 field system(v5); if ( dns2 ) { sprintf(v5, "/bin/echo nameserver %s >> /etc/resolv.conf", dns2); system(v5); } return 1; } return result;

Multiple OS command injection vulnerabilities exist in the libNetSetObj.so functionality of GeoVision GV-I/O Box 4E 2.09. A specially crafted network packet can lead to command execution. An attacker can send a network request to trigger this vulnerability. `libNetSetObj.so` is an internal library used by various binaries on the device to configure the network stack (start and stop various services, configure IP, Netmask, gateway, dns, etc.) #### CNetSetObj::m_F_n_Set_Gate_way command injection The following function takes a string as a gatewy address, performs no sanitization on it and calls `system`. This is a classic command injection vulnerability. The function is reachable from both the network-exposed `DVRSearch` service and the `Network.cgi` endpoint. int __fastcall CNetSetObj::m_F_n_Set_Gate_way(const char **this, char *gw, char *dev) { char s[324]; // [sp+4h] [bp-144h] BYREF if ( !dev && !*this || !gw ) return 0; system("/sbin/route del -net 224.0.0.0 netmask 224.0.0.0"); system("/sbin/route del default "); if ( dev ) sprintf(s, "/sbin/route add default gw %s dev %s", gw, dev); //attacker controlled gw string else sprintf(s, "/sbin/route add default gw %s dev %s", gw, *this); //attacker controlled gw string system(s); sprintf(s, "/sbin/route add -net 224.0.0.0 netmask 224.0.0.0 gw %s dev %s", gw, *this); //attacker controlled gw string system(s); return 1; }

Multiple OS command injection vulnerabilities exist in the libNetSetObj.so functionality of GeoVision GV-I/O Box 4E 2.09. A specially crafted network packet can lead to command execution. An attacker can send a network request to trigger this vulnerability. `libNetSetObj.so` is an internal library used by various binaries on the device to configure the network stack (start and stop various services, configure IP, Netmask, gateway, dns, etc.) #### CNetSetObj::m_F_n_Set_Net_Mask command injection The following function takes a string as a net mask address, performs no sanitization on it and calls `system`. This is a classic command injection vulnerability. The function is reachable from both the network-exposed `DVRSearch` service and the `Network.cgi` endpoint. int __fastcall CNetSetObj::m_F_n_Set_Net_Mask(const char **this, char *netmask_addr) { bool v2; // zf char v4[72]; // [sp+0h] [bp-48h] BYREF v2 = *this == 0; if ( *this ) v2 = netmask_addr == 0; if ( v2 ) return 0; sprintf(v4, "/sbin/ifconfig %s netmask %s", *this, netmask_addr); // attacker controlled netmask_addr system(v4); return 1; }

GV-I/O Box 4E is a smart embedded device with 4 input and 4 relays output that can be controlled over Ethernet and RS-485. DVRSearch is a service running by default on the IOBox listening for UDP messages on port 10001. Any user on the network can send messages to this service and interact with it. Upon receiving a UDP message, the server reads at most 1460 bytes into a local buffer and a pointer to the buffer is stored in a global variable: #### DNS field stack overflow The following code is vulnerable to a stack overflow that is attacker-controlled: v8 = strlen(g_network_config->dns_addr); memcpy(&reply_buf[248], g_network_config->dns_addr, v8);

GV-I/O Box 4E is a smart embedded device with 4 input and 4 relays output that can be controlled over Ethernet and RS-485. DVRSearch is a service running by default on the IOBox listening for UDP messages on port 10001. Any user on the network can send messages to this service and interact with it. Upon receiving a UDP message, the server reads at most 1460 bytes into a local buffer and a pointer to the buffer is stored in a global variable: #### Gateway field stack overflow The following code is vulnerable to a stack overflow that is attacker-controlled: v7 = strlen(g_network_config->gateway); memcpy(&reply_buf[216], g_network_config->gateway, v7);

GV-I/O Box 4E is a smart embedded device with 4 input and 4 relays output that can be controlled over Ethernet and RS-485. DVRSearch is a service running by default on the IOBox listening for UDP messages on port 10001. Any user on the network can send messages to this service and interact with it. Upon receiving a UDP message, the server reads at most 1460 bytes into a local buffer and a pointer to the buffer is stored in a global variable: #### Net Mask field stack overflow The following code is vulnerable to a stack overflow that is attacker-controlled: v6 = strlen(g_network_config->net_mask); memcpy(&reply_buf[184], g_network_config->net_mask, v6);

Multiple OS command injection vulnerabilities exist in the libNetSetObj.so functionality of GeoVision GV-I/O Box 4E 2.09. A specially crafted network packet can lead to command execution. An attacker can send a network request to trigger this vulnerability. `libNetSetObj.so` is an internal library used by various binaries on the device to configure the network stack (start and stop various services, configure IP, Netmask, gateway, dns, etc.) #### CNetSetObj::m_F_n_Set_IP_Addr command injection The following function takes a string as an ip address, performs no sanitization and calls `system`. This is a classic command injection vulnerability. The function is reachable from both the network-exposed `DVRSearch` service and the `Network.cgi` endpoint. int __fastcall CNetSetObj::m_F_n_Set_IP_Addr(const char **this, char *ip_addr) { bool v2; // zf char v4[72]; // [sp+0h] [bp-48h] BYREF v2 = *this == 0; if ( *this ) v2 = ip_addr == 0; if ( v2 ) return 0; sprintf(v4, "/sbin/ifconfig %s %s", *this, ip_addr); // attacker controlled ip address system(v4); return 1; }

GV-I/O Box 4E is a smart embedded device with 4 input and 4 relays output that can be controlled over Ethernet and RS-485. DVRSearch is a service running by default on the IOBox listening for UDP messages on port 10001. Any user on the network can send messages to this service and interact with it. Upon receiving a UDP message, the server reads at most 1460 bytes into a local buffer and a pointer to the buffer is stored in a global variable: #### IP field stack overflow The following code is vulnerable to a stack overflow that is attacker-controlled: v3 = strlen(g_network_config->ip_addr); memcpy(&reply_buf[36], g_network_config->ip_addr, v3);

Poweradmin is a web-based DNS administration tool for PowerDNS server. Versions prior to 4.2.4 and 4.3.3 use the attacker-controlled `HTTP_HOST` request header as the authoritative source for building callback URLs in its OIDC, SAML, and logout authentication flows without any validation. An unauthenticated attacker can poison the `redirect_uri` sent to the Identity Provider, causing the IdP to redirect the victim's authorization code to an attacker-controlled server - resulting in full account takeover with no credentials required. Versions 4.2.4 and 4.3.3 patch the issue.

A missing authorization vulnerability was found in the Event-Driven Ansible (EDA) websocket API. The /api/eda/ws/ansible-rulebook endpoint does not verify user permissions when processing Worker messages. Any authenticated user can send a forged message with an arbitrary activation_id to receive plaintext credentials associated with that activation, including OAuth tokens, vault passwords, and SSH keys.

Traefik is an HTTP reverse proxy and load balancer. Prior to 3.7.3, there is a critical vulnerability in Traefik's HTTP/3 (QUIC) TLS configuration selection that allows unauthenticated clients to bypass router-specific mTLS enforcement. When HTTP/3 is enabled on an entrypoint, the TLS handshake selects the applicable TLS configuration through an exact, case-sensitive lookup on the SNI value, which fails to match wildcard host patterns (e.g., *.example.com) or case variants of the configured hostname. Because the handshake falls back to the default TLS configuration — which may not require client certificates — a client can complete the QUIC handshake without presenting a certificate, while the subsequent HTTP routing layer still dispatches the request to a backend protected by a router-specific mTLS policy. The issue affects deployments where HTTP/3 is enabled, a router uses a wildcard Host rule or case-insensitive hostname matching, a router-specific TLSOptions enforces client certificate authentication, and UDP access to the entrypoint is reachable by an attacker. This vulnerability is fixed in 3.7.3.

Traefik is an HTTP reverse proxy and load balancer. From 3.7.0 until 3.7.3, there is a high severity vulnerability in Traefik's domain-fronting protection (SNICheck) that allows an unauthenticated client to bypass mutual TLS enforced through wildcard router TLSOptions. When a router uses a wildcard host rule such as Host(*.example.com) with stricter TLS options (for example RequireAndVerifyClientCert), SNICheck resolves the TLS options for the HTTP Host header using exact map lookups only and never applies wildcard matching. If another permissive SNI is served on the same entrypoint, an attacker can complete the TLS handshake under the permissive options and then send an HTTP Host header targeting the wildcard-protected backend, reaching it without presenting a client certificate. This affects the regular HTTPS / HTTP-2 path and does not require HTTP/3. This vulnerability is fixed in 3.7.3.

Traefik is an HTTP reverse proxy and load balancer. Prior to 2.11.48, 3.6.19, and 3.7.3, there is a high severity vulnerability in Traefik's StripPrefix middleware that allows an unauthenticated attacker to bypass route-level authentication and authorization. When a public router matches on a PathPrefix rule and applies the StripPrefix middleware, a request path containing .. or its percent-encoded form %2e%2e can match the public route at routing time and then, after the prefix is stripped and the path is normalized, resolve to a path served by a separate, authenticated router. As a result, an attacker can reach protected backend paths — such as admin or internal configuration endpoints — without satisfying the authentication middleware attached to the protected router. This vulnerability is fixed in 2.11.48, 3.6.19, and 3.7.3.

Crawl4AI is an open-source LLM friendly web crawler & scraper. Prior to 0.8.7, the _safe_eval_expression() function in the computed fields feature uses an AST validator that only blocks attributes starting with underscore. Python generator and frame object attributes (gi_frame, f_back, f_builtins) do NOT start with underscore, enabling a complete sandbox escape to achieve arbitrary code execution. The attack requires no authentication (JWT disabled by default) and is triggered via POST /crawl with a crafted extraction schema. This vulnerability is fixed in 0.8.7.

Claude Code is an agentic coding tool. From 0.2.54 until 2.1.163, because the hostname huggingface.co was pre-approved as a bare hostname for the WebFetch tool, any path on that domain—including attacker-controlled model repositories—was auto-approved without a permission prompt or being subject to --allowedTools restrictions. An attacker able to inject untrusted content into a Claude Code context could direct it to issue WebFetch requests against attacker-controlled repository files (e.g. /resolve/main/config.json), which HuggingFace counts as downloads server-side, creating a covert out-of-band channel for encoding and exfiltrating data Claude can access such as files, environment variables, or command output. Reliably exploiting this required the ability to add untrusted content into a Claude Code context window. This vulnerability is fixed in 2.1.163.

LobeHub is a work-and-lifestyle space to find, build, and collaborate with agent teammates that grow with you. Prior to 2.1.57, the /webapi/proxy endpoint on app.lobehub.com accepts a URL in the POST body and fetches it server-side without any authentication. An attacker can use this to make arbitrary outbound requests from LobeHub's infrastructure, leak Vercel deployment details, and inject cookies on the lobehub.com domain through reflected Set-Cookie headers. This vulnerability is fixed in 2.1.57.

immich is a high performance self-hosted photo and video management solution. From commit 4ffa26c9 until 4eb1003, a reflected cross-site scripting (XSS) vulnerability on the /auth/login page allows an attacker to fully compromise any authenticated user's account with a single link click. The continue query parameter is read from the URL and passed to SvelteKit's redirect() without any scheme or origin validation, allowing attacker-controlled JavaScript to execute inside Immich's origin. The payload then uses the victim's existing session to mint an all-permission API key on their account, leading to persistent account takeover. This vulnerability is fixed in commit 4eb1003.

Langflow is a tool for building and deploying AI-powered agents and workflows. Prior to 1.9.1, unauthenticated users can upload any amount of data to the server without any limitations. No need for any prior knowledge, only network access to Langflow. This can lead to space exhaustion on the server. In addition, in the response, the absolute path of the uploaded file is reported to the attacker, which is an information leak that can assist in chaining other primitives. This vulnerability is fixed in 1.9.1.

Langflow is a tool for building and deploying AI-powered agents and workflows. Prior to 1.9.2, by controlling a files that are digested into the RAG, an attacker can direct the node to read any file on the file-system by absolute path. All components based on BaseFileComponent are vulnerable to the vulnerability. This includes Docling (DoclingInlineComponent), Docling Serve, DoclingRemoteComponent), Read File (FileComponent), NVIDIA Retriever Extraction (NvidiaIngestComponent), Video File (VideoFileComponent), and Unstructured API (UnstructuredComponent). This vulnerability is fixed in 1.9.2.

n8n is an open source workflow automation platform. Prior to 1.123.55, 2.25.7, and 2.26.2, a member-level user with editor access to a shared workflow could reference credentials they do not own via specific public API endpoints. Credential ownership checks were only enforced partially leading to cross-user credential access. This issue affects instances where workflow sharing is enabled and at least one workflow has been shared with a member-level user as an Editor. This vulnerability is fixed in 1.123.55, 2.25.7, and 2.26.2.

n8n is an open source workflow automation platform. Prior to 1.123.55, 2.25.7, and 2.26.2, three EE endpoints used by the Dynamic Credentials feature accepted any authenticated n8n session without performing per-resource ownership or scope checks on the target workflow or credential. An authenticated user with no project membership or credential sharing relationship could enumerate credential identifiers, names, and types referenced by any private workflow in the instance, initiate an OAuth authorization flow against another user's credential to overwrite its stored tokens with tokens bound to an account they control, or revoke another user's stored credential tokens entirely. Workflows relying on a hijacked credential would subsequently execute under the attacker's OAuth identity, enabling data exfiltration to attacker-controlled external services and persistent takeover of integrations. Token revocation would break affected workflows. This vulnerability is fixed in 1.123.55, 2.25.7, and 2.26.2.

Langflow is a tool for building and deploying AI-powered agents and workflows. Prior to 1.9.2, the "Shareable Playground" (or "Public Flows" in code) contains a critical RCE vulnerability. Shareable Playground feature works by enabling the execution of workflows by unauthenticated users, by accessing a link. Specifically, it enables the route /api/v1/build_public_tmp to execute any public flow, given a public flow ID. When the route executes the flow, it allows for providing arbitrary custom Python code as the nodes code, inside the JSON payload. The vulnerable field is data.nodes[X].data.node.template.code.value. This vulnerability is fixed in 1.9.2.

n8n is an open source workflow automation platform. Prior to 1.123.43, 2.22.1, and 2.20.7, an attacker with write access to the git repository connected to an n8n Source Control configuration could commit a malicious Data Table JSON file containing a crafted column name. When an administrator performed a Source Control Pull, n8n imported the file and could lead to SQL injection on the internal PostgreSQL instance. Exploitation requires the n8n instance uses PostgreSQL as its database backend, the Source Control feature is enabled and connected to a repository the attacker can write to, and an administrator triggers a Source Control Pull. This vulnerability is fixed in 1.123.43, 2.22.1, and 2.20.7.

n8n is an open source workflow automation platform. Prior to 1.123.43, 2.22.1, and 2.20.7, an authenticated user with permission to create or modify workflows could bypass the patch for CVE-2026-42232 in the XML node. When combined with other nodes, this could lead to RCE on the n8n host. This vulnerability is fixed in 1.123.43, 2.22.1, and 2.20.7.

n8n is an open source workflow automation platform. Prior to 1.123.43, 2.22.1, and 2.20.7, an authenticated user with permission to create or modify workflows could achieve global prototype pollution via an unvalidated pagination parameter in the HTTP Request node. Combined with other techniques this could lead to RCE on the instance. This vulnerability is fixed in 1.123.43, 2.22.1, and 2.20.7.

n8n is an open source workflow automation platform. Prior to 2.25.7 and 2.26.2, an authenticated user with permission to create or modify workflows could supply a crafted parameters to the TimescaleDB and/or legacy Postgres v1 node's allowing arbitrary SQL to be injected and executed against the connected database within the privileges of the configured database account. This vulnerability is fixed in 2.25.7 and 2.26.2.

n8n is an open source workflow automation platform. Prior to 2.25.7 and 2.26.2, when @n8n/mcp-browser is run in HTTP transport mode, the MCP endpoint accepts session initialization and tool invocation requests without any authentication. Any network-reachable client, or any website visited by the user, can establish an MCP session and invoke browser-control tools. Where the n8n AI Browser Bridge extension is installed and a browser connection is active, an unauthenticated caller can access browser-control capabilities including navigation, JavaScript evaluation, and cookie and storage access against the user's real browser profile. This issue only affects instances where @n8n/mcp-browser is run with the HTTP transport (--transport http). This vulnerability is fixed in 2.25.7 and 2.26.2.

picklescan before 1.0.4 fails to block at least seven Python standard library modules (including uuid, _osx_support, _aix_support, _pyrepl.pager, and imaplib) exposing eight functions that provide direct arbitrary command execution. Attackers can craft malicious pickle files importing these unblocked modules to achieve remote code execution while bypassing picklescan's safety validation entirely.

Flowise before 3.1.2 contains multiple OS command injection vulnerabilities in the Custom MCP Server feature due to incomplete command-flag validation and a regex bypass in local file access restrictions. An attacker with a Flowise account of any role, or API access with view/update permissions for chatflows, can configure a malicious MCP server to bypass the validateCommandFlags blocklist (for example, 'docker build' is not blocked, and 'npx --yes' is not blocked while only '-y' is) and the validateArgsForLocalFileAccess checks, resulting in execution of arbitrary commands on the Flowise host.