CVE Database

A buffer overflow vulnerability in the dgiot binary in LSC Smart Indoor IP Camera V7.6.32. The flaw exists in the handling of the Time Zone (TZ) parameter within the ONVIF configuration interface. The time zone (TZ) parameter does not have its length properly validated before being copied into a fixed-size buffer using the insecure strcpy function.

An issue in Eufy Homebase 2 version 3.3.4.1h allows a local attacker to obtain sensitive information via the cryptographic scheme.

When a certificate and its private key are installed in the Windows machine certificate store using Network and Security tool, access rights to the private key are unnecessarily granted to the operator group. * Installations based on Panorama Suite 2025 (25.00.004) are vulnerable unless update PS-2500-00-0357 (or higher) is installed * Installations based on Panorama Suite 2025 Updated Dec. 25 (25.10.007) are not vulnerable Please refer to security bulletin BS-036, available on the Panorama CSIRT website: https://my.codra.net/en-gb/csirt.

In the Linux kernel, the following vulnerability has been resolved: xen/privcmd: restrict usage in unprivileged domU The Xen privcmd driver allows to issue arbitrary hypercalls from user space processes. This is normally no problem, as access is usually limited to root and the hypervisor will deny any hypercalls affecting other domains. In case the guest is booted using secure boot, however, the privcmd driver would be enabling a root user process to modify e.g. kernel memory contents, thus breaking the secure boot feature. The only known case where an unprivileged domU is really needing to use the privcmd driver is the case when it is acting as the device model for another guest. In this case all hypercalls issued via the privcmd driver will target that other guest. Fortunately the privcmd driver can already be locked down to allow only hypercalls targeting a specific domain, but this mode can be activated from user land only today. The target domain can be obtained from Xenstore, so when not running in dom0 restrict the privcmd driver to that target domain from the beginning, resolving the potential problem of breaking secure boot. This is XSA-482 --- V2: - defer reading from Xenstore if Xenstore isn't ready yet (Jan Beulich) - wait in open() if target domain isn't known yet - issue message in case no target domain found (Jan Beulich)

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: Fix accepting multiple L2CAP_ECRED_CONN_REQ Currently the code attempts to accept requests regardless of the command identifier which may cause multiple requests to be marked as pending (FLAG_DEFER_SETUP) which can cause more than L2CAP_ECRED_MAX_CID(5) to be allocated in l2cap_ecred_rsp_defer causing an overflow. The spec is quite clear that the same identifier shall not be used on subsequent requests: 'Within each signaling channel a different Identifier shall be used for each successive request or indication.' https://www.bluetooth.com/wp-content/uploads/Files/Specification/HTML/Core-62/out/en/host/logical-link-control-and-adaptation-protocol-specification.html#UUID-32a25a06-4aa4-c6c7-77c5-dcfe3682355d So this attempts to check if there are any channels pending with the same identifier and rejects if any are found.

In the Linux kernel, the following vulnerability has been resolved: bridge: cfm: Fix race condition in peer_mep deletion When a peer MEP is being deleted, cancel_delayed_work_sync() is called on ccm_rx_dwork before freeing. However, br_cfm_frame_rx() runs in softirq context under rcu_read_lock (without RTNL) and can re-schedule ccm_rx_dwork via ccm_rx_timer_start() between cancel_delayed_work_sync() returning and kfree_rcu() being called. The following is a simple race scenario: cpu0 cpu1 mep_delete_implementation() cancel_delayed_work_sync(ccm_rx_dwork); br_cfm_frame_rx() // peer_mep still in hlist if (peer_mep->ccm_defect) ccm_rx_timer_start() queue_delayed_work(ccm_rx_dwork) hlist_del_rcu(&peer_mep->head); kfree_rcu(peer_mep, rcu); ccm_rx_work_expired() // on freed peer_mep To prevent this, cancel_delayed_work_sync() is replaced with disable_delayed_work_sync() in both peer MEP deletion paths, so that subsequent queue_delayed_work() calls from br_cfm_frame_rx() are silently rejected. The cc_peer_disable() helper retains cancel_delayed_work_sync() because it is also used for the CC enable/disable toggle path where the work must remain re-schedulable.

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: release flowtable after rcu grace period on error Call synchronize_rcu() after unregistering the hooks from error path, since a hook that already refers to this flowtable can be already registered, exposing this flowtable to packet path and nfnetlink_hook control plane. This error path is rare, it should only happen by reaching the maximum number hooks or by failing to set up to hardware offload, just call synchronize_rcu(). There is a check for already used device hooks by different flowtable that could result in EEXIST at this late stage. The hook parser can be updated to perform this check earlier to this error path really becomes rarely exercised. Uncovered by KASAN reported as use-after-free from nfnetlink_hook path when dumping hooks.

In the Linux kernel, the following vulnerability has been resolved: netfilter: xt_CT: drop pending enqueued packets on template removal Templates refer to objects that can go away while packets are sitting in nfqueue refer to: - helper, this can be an issue on module removal. - timeout policy, nfnetlink_cttimeout might remove it. The use of templates with zone and event cache filter are safe, since this just copies values. Flush these enqueued packets in case the template rule gets removed.

In the Linux kernel, the following vulnerability has been resolved: tracing/dma: Cap dma_map_sg tracepoint arrays to prevent buffer overflow The dma_map_sg tracepoint can trigger a perf buffer overflow when tracing large scatter-gather lists. With devices like virtio-gpu creating large DRM buffers, nents can exceed 1000 entries, resulting in: phys_addrs: 1000 * 8 bytes = 8,000 bytes dma_addrs: 1000 * 8 bytes = 8,000 bytes lengths: 1000 * 4 bytes = 4,000 bytes Total: ~20,000 bytes This exceeds PERF_MAX_TRACE_SIZE (8192 bytes), causing: WARNING: CPU: 0 PID: 5497 at kernel/trace/trace_event_perf.c:405 perf buffer not large enough, wanted 24620, have 8192 Cap all three dynamic arrays at 128 entries using min() in the array size calculation. This ensures arrays are only as large as needed (up to the cap), avoiding unnecessary memory allocation for small operations while preventing overflow for large ones. The tracepoint now records the full nents/ents counts and a truncated flag so users can see when data has been capped. Changes in v2: - Use min(nents, DMA_TRACE_MAX_ENTRIES) for dynamic array sizing instead of fixed DMA_TRACE_MAX_ENTRIES allocation (feedback from Steven Rostedt) - This allocates only what's needed up to the cap, avoiding waste for small operations Reviwed-by: Sean Anderson <sean.anderson@linux.dev>

In the Linux kernel, the following vulnerability has been resolved: Squashfs: check metadata block offset is within range Syzkaller reports a "general protection fault in squashfs_copy_data" This is ultimately caused by a corrupted index look-up table, which produces a negative metadata block offset. This is subsequently passed to squashfs_copy_data (via squashfs_read_metadata) where the negative offset causes an out of bounds access. The fix is to check that the offset is within range in squashfs_read_metadata. This will trap this and other cases.

In the Linux kernel, the following vulnerability has been resolved: pinctrl: cirrus: cs42l43: Fix double-put in cs42l43_pin_probe() devm_add_action_or_reset() already invokes the action on failure, so the explicit put causes a double-put.

In the Linux kernel, the following vulnerability has been resolved: bpf, arm64: Force 8-byte alignment for JIT buffer to prevent atomic tearing struct bpf_plt contains a u64 target field. Currently, the BPF JIT allocator requests an alignment of 4 bytes (sizeof(u32)) for the JIT buffer. Because the base address of the JIT buffer can be 4-byte aligned (e.g., ending in 0x4 or 0xc), the relative padding logic in build_plt() fails to ensure that target lands on an 8-byte boundary. This leads to two issues: 1. UBSAN reports misaligned-access warnings when dereferencing the structure. 2. More critically, target is updated concurrently via WRITE_ONCE() in bpf_arch_text_poke() while the JIT'd code executes ldr. On arm64, 64-bit loads/stores are only guaranteed to be single-copy atomic if they are 64-bit aligned. A misaligned target risks a torn read, causing the JIT to jump to a corrupted address. Fix this by increasing the allocation alignment requirement to 8 bytes (sizeof(u64)) in bpf_jit_binary_pack_alloc(). This anchors the base of the JIT buffer to an 8-byte boundary, allowing the relative padding math in build_plt() to correctly align the target field.

In the Linux kernel, the following vulnerability has been resolved: net/sched: act_ife: Fix metalist update behavior Whenever an ife action replace changes the metalist, instead of replacing the old data on the metalist, the current ife code is appending the new metadata. Aside from being innapropriate behavior, this may lead to an unbounded addition of metadata to the metalist which might cause an out of bounds error when running the encode op: [ 138.423369][ C1] ================================================================== [ 138.424317][ C1] BUG: KASAN: slab-out-of-bounds in ife_tlv_meta_encode (net/ife/ife.c:168) [ 138.424906][ C1] Write of size 4 at addr ffff8880077f4ffe by task ife_out_out_bou/255 [ 138.425778][ C1] CPU: 1 UID: 0 PID: 255 Comm: ife_out_out_bou Not tainted 7.0.0-rc1-00169-gfbdfa8da05b6 #624 PREEMPT(full) [ 138.425795][ C1] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 138.425800][ C1] Call Trace: [ 138.425804][ C1] <IRQ> [ 138.425808][ C1] dump_stack_lvl (lib/dump_stack.c:122) [ 138.425828][ C1] print_report (mm/kasan/report.c:379 mm/kasan/report.c:482) [ 138.425839][ C1] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221) [ 138.425844][ C1] ? __virt_addr_valid (./arch/x86/include/asm/preempt.h:95 (discriminator 1) ./include/linux/rcupdate.h:975 (discriminator 1) ./include/linux/mmzone.h:2207 (discriminator 1) arch/x86/mm/physaddr.c:54 (discriminator 1)) [ 138.425853][ C1] ? ife_tlv_meta_encode (net/ife/ife.c:168) [ 138.425859][ C1] kasan_report (mm/kasan/report.c:221 mm/kasan/report.c:597) [ 138.425868][ C1] ? ife_tlv_meta_encode (net/ife/ife.c:168) [ 138.425878][ C1] kasan_check_range (mm/kasan/generic.c:186 (discriminator 1) mm/kasan/generic.c:200 (discriminator 1)) [ 138.425884][ C1] __asan_memset (mm/kasan/shadow.c:84 (discriminator 2)) [ 138.425889][ C1] ife_tlv_meta_encode (net/ife/ife.c:168) [ 138.425893][ C1] ? ife_tlv_meta_encode (net/ife/ife.c:171) [ 138.425898][ C1] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221) [ 138.425903][ C1] ife_encode_meta_u16 (net/sched/act_ife.c:57) [ 138.425910][ C1] ? __pfx_do_raw_spin_lock (kernel/locking/spinlock_debug.c:114) [ 138.425916][ C1] ? __asan_memcpy (mm/kasan/shadow.c:105 (discriminator 3)) [ 138.425921][ C1] ? __pfx_ife_encode_meta_u16 (net/sched/act_ife.c:45) [ 138.425927][ C1] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221) [ 138.425931][ C1] tcf_ife_act (net/sched/act_ife.c:847 net/sched/act_ife.c:879) To solve this issue, fix the replace behavior by adding the metalist to the ife rcu data structure.

In the Linux kernel, the following vulnerability has been resolved: nfc: rawsock: cancel tx_work before socket teardown In rawsock_release(), cancel any pending tx_work and purge the write queue before orphaning the socket. rawsock_tx_work runs on the system workqueue and calls nfc_data_exchange which dereferences the NCI device. Without synchronization, tx_work can race with socket and device teardown when a process is killed (e.g. by SIGKILL), leading to use-after-free or leaked references. Set SEND_SHUTDOWN first so that if tx_work is already running it will see the flag and skip transmitting, then use cancel_work_sync to wait for any in-progress execution to finish, and finally purge any remaining queued skbs.

In the Linux kernel, the following vulnerability has been resolved: ksmbd: Compare MACs in constant time To prevent timing attacks, MAC comparisons need to be constant-time. Replace the memcmp() with the correct function, crypto_memneq().

In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7925: Fix possible oob access in mt7925_mac_write_txwi_80211() Check frame length before accessing the mgmt fields in mt7925_mac_write_txwi_80211 in order to avoid a possible oob access.

In the Linux kernel, the following vulnerability has been resolved: PCI: dwc: ep: Flush MSI-X write before unmapping its ATU entry Endpoint drivers use dw_pcie_ep_raise_msix_irq() to raise an MSI-X interrupt to the host using a writel(), which generates a PCI posted write transaction. There's no completion for posted writes, so the writel() may return before the PCI write completes. dw_pcie_ep_raise_msix_irq() also unmaps the outbound ATU entry used for the PCI write, so the write races with the unmap. If the PCI write loses the race with the ATU unmap, the write may corrupt host memory or cause IOMMU errors, e.g., these when running fio with a larger queue depth against nvmet-pci-epf: arm-smmu-v3 fc900000.iommu: 0x0000010000000010 arm-smmu-v3 fc900000.iommu: 0x0000020000000000 arm-smmu-v3 fc900000.iommu: 0x000000090000f040 arm-smmu-v3 fc900000.iommu: 0x0000000000000000 arm-smmu-v3 fc900000.iommu: event: F_TRANSLATION client: 0000:01:00.0 sid: 0x100 ssid: 0x0 iova: 0x90000f040 ipa: 0x0 arm-smmu-v3 fc900000.iommu: unpriv data write s1 "Input address caused fault" stag: 0x0 Flush the write by performing a readl() of the same address to ensure that the write has reached the destination before the ATU entry is unmapped. The same problem was solved for dw_pcie_ep_raise_msi_irq() in commit 8719c64e76bf ("PCI: dwc: ep: Cache MSI outbound iATU mapping"), but there it was solved by dedicating an outbound iATU only for MSI. We can't do the same for MSI-X because each vector can have a different msg_addr and the msg_addr may be changed while the vector is masked. [bhelgaas: commit log]

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix stack-out-of-bounds write in devmap get_upper_ifindexes() iterates over all upper devices and writes their indices into an array without checking bounds. Also the callers assume that the max number of upper devices is MAX_NEST_DEV and allocate excluded_devices[1+MAX_NEST_DEV] on the stack, but that assumption is not correct and the number of upper devices could be larger than MAX_NEST_DEV (e.g., many macvlans), causing a stack-out-of-bounds write. Add a max parameter to get_upper_ifindexes() to avoid the issue. When there are too many upper devices, return -EOVERFLOW and abort the redirect. To reproduce, create more than MAX_NEST_DEV(8) macvlans on a device with an XDP program attached using BPF_F_BROADCAST | BPF_F_EXCLUDE_INGRESS. Then send a packet to the device to trigger the XDP redirect path.

In the Linux kernel, the following vulnerability has been resolved: x86/fred: Correct speculative safety in fred_extint() array_index_nospec() is no use if the result gets spilled to the stack, as it makes the believed safe-under-speculation value subject to memory predictions. For all practical purposes, this means array_index_nospec() must be used in the expression that accesses the array. As the code currently stands, it's the wrong side of irqentry_enter(), and 'index' is put into %ebp across the function call. Remove the index variable and reposition array_index_nospec(), so it's calculated immediately before the array access.

In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_set_pipapo: split gc into unlink and reclaim phase Yiming Qian reports Use-after-free in the pipapo set type: Under a large number of expired elements, commit-time GC can run for a very long time in a non-preemptible context, triggering soft lockup warnings and RCU stall reports (local denial of service). We must split GC in an unlink and a reclaim phase. We cannot queue elements for freeing until pointers have been swapped. Expired elements are still exposed to both the packet path and userspace dumpers via the live copy of the data structure. call_rcu() does not protect us: dump operations or element lookups starting after call_rcu has fired can still observe the free'd element, unless the commit phase has made enough progress to swap the clone and live pointers before any new reader has picked up the old version. This a similar approach as done recently for the rbtree backend in commit 35f83a75529a ("netfilter: nft_set_rbtree: don't gc elements on insert").

In the Linux kernel, the following vulnerability has been resolved: drm/xe/queue: Call fini on exec queue creation fail Every call to queue init should have a corresponding fini call. Skipping this would mean skipping removal of the queue from GuC list (which is part of guc_id allocation). A damaged queue stored in exec_queue_lookup list would lead to invalid memory reference, sooner or later. Call fini to free guc_id. This must be done before any internal LRCs are freed. Since the finalization with this extra call became very similar to __xe_exec_queue_fini(), reuse that. To make this reuse possible, alter xe_lrc_put() so it can survive NULL parameters, like other similar functions. v2: Reuse _xe_exec_queue_fini(). Make xe_lrc_put() aware of NULLs. (cherry picked from commit 393e5fea6f7d7054abc2c3d97a4cfe8306cd6079)

In the Linux kernel, the following vulnerability has been resolved: crypto: ccp - Fix use-after-free on error path In the error path of sev_tsm_init_locked(), the code dereferences 't' after it has been freed with kfree(). The pr_err() statement attempts to access t->tio_en and t->tio_init_done after the memory has been released. Move the pr_err() call before kfree(t) to access the fields while the memory is still valid. This issue reported by Smatch static analyser

In the Linux kernel, the following vulnerability has been resolved: xdp: produce a warning when calculated tailroom is negative Many ethernet drivers report xdp Rx queue frag size as being the same as DMA write size. However, the only user of this field, namely bpf_xdp_frags_increase_tail(), clearly expects a truesize. Such difference leads to unspecific memory corruption issues under certain circumstances, e.g. in ixgbevf maximum DMA write size is 3 KB, so when running xskxceiver's XDP_ADJUST_TAIL_GROW_MULTI_BUFF, 6K packet fully uses all DMA-writable space in 2 buffers. This would be fine, if only rxq->frag_size was properly set to 4K, but value of 3K results in a negative tailroom, because there is a non-zero page offset. We are supposed to return -EINVAL and be done with it in such case, but due to tailroom being stored as an unsigned int, it is reported to be somewhere near UINT_MAX, resulting in a tail being grown, even if the requested offset is too much (it is around 2K in the abovementioned test). This later leads to all kinds of unspecific calltraces. [ 7340.337579] xskxceiver[1440]: segfault at 1da718 ip 00007f4161aeac9d sp 00007f41615a6a00 error 6 [ 7340.338040] xskxceiver[1441]: segfault at 7f410000000b ip 00000000004042b5 sp 00007f415bffecf0 error 4 [ 7340.338179] in libc.so.6[61c9d,7f4161aaf000+160000] [ 7340.339230] in xskxceiver[42b5,400000+69000] [ 7340.340300] likely on CPU 6 (core 0, socket 6) [ 7340.340302] Code: ff ff 01 e9 f4 fe ff ff 0f 1f 44 00 00 4c 39 f0 74 73 31 c0 ba 01 00 00 00 f0 0f b1 17 0f 85 ba 00 00 00 49 8b 87 88 00 00 00 <4c> 89 70 08 eb cc 0f 1f 44 00 00 48 8d bd f0 fe ff ff 89 85 ec fe [ 7340.340888] likely on CPU 3 (core 0, socket 3) [ 7340.345088] Code: 00 00 00 ba 00 00 00 00 be 00 00 00 00 89 c7 e8 31 ca ff ff 89 45 ec 8b 45 ec 85 c0 78 07 b8 00 00 00 00 eb 46 e8 0b c8 ff ff <8b> 00 83 f8 69 74 24 e8 ff c7 ff ff 8b 00 83 f8 0b 74 18 e8 f3 c7 [ 7340.404334] Oops: general protection fault, probably for non-canonical address 0x6d255010bdffc: 0000 [#1] SMP NOPTI [ 7340.405972] CPU: 7 UID: 0 PID: 1439 Comm: xskxceiver Not tainted 6.19.0-rc1+ #21 PREEMPT(lazy) [ 7340.408006] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.17.0-5.fc42 04/01/2014 [ 7340.409716] RIP: 0010:lookup_swap_cgroup_id+0x44/0x80 [ 7340.410455] Code: 83 f8 1c 73 39 48 ba ff ff ff ff ff ff ff 03 48 8b 04 c5 20 55 fa bd 48 21 d1 48 89 ca 83 e1 01 48 d1 ea c1 e1 04 48 8d 04 90 <8b> 00 48 83 c4 10 d3 e8 c3 cc cc cc cc 31 c0 e9 98 b7 dd 00 48 89 [ 7340.412787] RSP: 0018:ffffcc5c04f7f6d0 EFLAGS: 00010202 [ 7340.413494] RAX: 0006d255010bdffc RBX: ffff891f477895a8 RCX: 0000000000000010 [ 7340.414431] RDX: 0001c17e3fffffff RSI: 00fa070000000000 RDI: 000382fc7fffffff [ 7340.415354] RBP: 00fa070000000000 R08: ffffcc5c04f7f8f8 R09: ffffcc5c04f7f7d0 [ 7340.416283] R10: ffff891f4c1a7000 R11: ffffcc5c04f7f9c8 R12: ffffcc5c04f7f7d0 [ 7340.417218] R13: 03ffffffffffffff R14: 00fa06fffffffe00 R15: ffff891f47789500 [ 7340.418229] FS: 0000000000000000(0000) GS:ffff891ffdfaa000(0000) knlGS:0000000000000000 [ 7340.419489] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 7340.420286] CR2: 00007f415bfffd58 CR3: 0000000103f03002 CR4: 0000000000772ef0 [ 7340.421237] PKRU: 55555554 [ 7340.421623] Call Trace: [ 7340.421987] <TASK> [ 7340.422309] ? softleaf_from_pte+0x77/0xa0 [ 7340.422855] swap_pte_batch+0xa7/0x290 [ 7340.423363] zap_nonpresent_ptes.constprop.0.isra.0+0xd1/0x270 [ 7340.424102] zap_pte_range+0x281/0x580 [ 7340.424607] zap_pmd_range.isra.0+0xc9/0x240 [ 7340.425177] unmap_page_range+0x24d/0x420 [ 7340.425714] unmap_vmas+0xa1/0x180 [ 7340.426185] exit_mmap+0xe1/0x3b0 [ 7340.426644] __mmput+0x41/0x150 [ 7340.427098] exit_mm+0xb1/0x110 [ 7340.427539] do_exit+0x1b2/0x460 [ 7340.427992] do_group_exit+0x2d/0xc0 [ 7340.428477] get_signal+0x79d/0x7e0 [ 7340.428957] arch_do_signal_or_restart+0x34/0x100 [ 7340.429571] exit_to_user_mode_loop+0x8e/0x4c0 [ 7340.430159] do_syscall_64+0x188/ ---truncated---

In the Linux kernel, the following vulnerability has been resolved: net: sched: avoid qdisc_reset_all_tx_gt() vs dequeue race for lockless qdiscs When shrinking the number of real tx queues, netif_set_real_num_tx_queues() calls qdisc_reset_all_tx_gt() to flush qdiscs for queues which will no longer be used. qdisc_reset_all_tx_gt() currently serializes qdisc_reset() with qdisc_lock(). However, for lockless qdiscs, the dequeue path is serialized by qdisc_run_begin/end() using qdisc->seqlock instead, so qdisc_reset() can run concurrently with __qdisc_run() and free skbs while they are still being dequeued, leading to UAF. This can easily be reproduced on e.g. virtio-net by imposing heavy traffic while frequently changing the number of queue pairs: iperf3 -ub0 -c $peer -t 0 & while :; do ethtool -L eth0 combined 1 ethtool -L eth0 combined 2 done With KASAN enabled, this leads to reports like: BUG: KASAN: slab-use-after-free in __qdisc_run+0x133f/0x1760 ... Call Trace: <TASK> ... __qdisc_run+0x133f/0x1760 __dev_queue_xmit+0x248f/0x3550 ip_finish_output2+0xa42/0x2110 ip_output+0x1a7/0x410 ip_send_skb+0x2e6/0x480 udp_send_skb+0xb0a/0x1590 udp_sendmsg+0x13c9/0x1fc0 ... </TASK> Allocated by task 1270 on cpu 5 at 44.558414s: ... alloc_skb_with_frags+0x84/0x7c0 sock_alloc_send_pskb+0x69a/0x830 __ip_append_data+0x1b86/0x48c0 ip_make_skb+0x1e8/0x2b0 udp_sendmsg+0x13a6/0x1fc0 ... Freed by task 1306 on cpu 3 at 44.558445s: ... kmem_cache_free+0x117/0x5e0 pfifo_fast_reset+0x14d/0x580 qdisc_reset+0x9e/0x5f0 netif_set_real_num_tx_queues+0x303/0x840 virtnet_set_channels+0x1bf/0x260 [virtio_net] ethnl_set_channels+0x684/0xae0 ethnl_default_set_doit+0x31a/0x890 ... Serialize qdisc_reset_all_tx_gt() against the lockless dequeue path by taking qdisc->seqlock for TCQ_F_NOLOCK qdiscs, matching the serialization model already used by dev_reset_queue(). Additionally clear QDISC_STATE_NON_EMPTY after reset so the qdisc state reflects an empty queue, avoiding needless re-scheduling.

In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: cancel rfkill_block work in wiphy_unregister() There is a use-after-free error in cfg80211_shutdown_all_interfaces found by syzkaller: BUG: KASAN: use-after-free in cfg80211_shutdown_all_interfaces+0x213/0x220 Read of size 8 at addr ffff888112a78d98 by task kworker/0:5/5326 CPU: 0 UID: 0 PID: 5326 Comm: kworker/0:5 Not tainted 6.19.0-rc2 #2 PREEMPT(voluntary) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Workqueue: events cfg80211_rfkill_block_work Call Trace: <TASK> dump_stack_lvl+0x116/0x1f0 print_report+0xcd/0x630 kasan_report+0xe0/0x110 cfg80211_shutdown_all_interfaces+0x213/0x220 cfg80211_rfkill_block_work+0x1e/0x30 process_one_work+0x9cf/0x1b70 worker_thread+0x6c8/0xf10 kthread+0x3c5/0x780 ret_from_fork+0x56d/0x700 ret_from_fork_asm+0x1a/0x30 </TASK> The problem arises due to the rfkill_block work is not cancelled when wiphy is being unregistered. In order to fix the issue cancel the corresponding work in wiphy_unregister(). Found by Linux Verification Center (linuxtesting.org) with Syzkaller.

In the Linux kernel, the following vulnerability has been resolved: cxl/mbox: validate payload size before accessing contents in cxl_payload_from_user_allowed() cxl_payload_from_user_allowed() casts and dereferences the input payload without first verifying its size. When a raw mailbox command is sent with an undersized payload (ie: 1 byte for CXL_MBOX_OP_CLEAR_LOG, which expects a 16-byte UUID), uuid_equal() reads past the allocated buffer, triggering a KASAN splat: BUG: KASAN: slab-out-of-bounds in memcmp+0x176/0x1d0 lib/string.c:683 Read of size 8 at addr ffff88810130f5c0 by task syz.1.62/2258 CPU: 2 UID: 0 PID: 2258 Comm: syz.1.62 Not tainted 6.19.0-dirty #3 PREEMPT(voluntary) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org 04/01/2014 Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0xab/0xe0 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0xce/0x650 mm/kasan/report.c:482 kasan_report+0xce/0x100 mm/kasan/report.c:595 memcmp+0x176/0x1d0 lib/string.c:683 uuid_equal include/linux/uuid.h:73 [inline] cxl_payload_from_user_allowed drivers/cxl/core/mbox.c:345 [inline] cxl_mbox_cmd_ctor drivers/cxl/core/mbox.c:368 [inline] cxl_validate_cmd_from_user drivers/cxl/core/mbox.c:522 [inline] cxl_send_cmd+0x9c0/0xb50 drivers/cxl/core/mbox.c:643 __cxl_memdev_ioctl drivers/cxl/core/memdev.c:698 [inline] cxl_memdev_ioctl+0x14f/0x190 drivers/cxl/core/memdev.c:713 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:597 [inline] __se_sys_ioctl fs/ioctl.c:583 [inline] __x64_sys_ioctl+0x18e/0x210 fs/ioctl.c:583 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xa8/0x330 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7fdaf331ba79 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fdaf1d77038 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00007fdaf3585fa0 RCX: 00007fdaf331ba79 RDX: 00002000000001c0 RSI: 00000000c030ce02 RDI: 0000000000000003 RBP: 00007fdaf33749df R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007fdaf3586038 R14: 00007fdaf3585fa0 R15: 00007ffced2af768 </TASK> Add 'in_size' parameter to cxl_payload_from_user_allowed() and validate the payload is large enough.

In the Linux kernel, the following vulnerability has been resolved: xsk: Fix fragment node deletion to prevent buffer leak After commit b692bf9a7543 ("xsk: Get rid of xdp_buff_xsk::xskb_list_node"), the list_node field is reused for both the xskb pool list and the buffer free list, this causes a buffer leak as described below. xp_free() checks if a buffer is already on the free list using list_empty(&xskb->list_node). When list_del() is used to remove a node from the xskb pool list, it doesn't reinitialize the node pointers. This means list_empty() will return false even after the node has been removed, causing xp_free() to incorrectly skip adding the buffer to the free list. Fix this by using list_del_init() instead of list_del() in all fragment handling paths, this ensures the list node is reinitialized after removal, allowing the list_empty() to work correctly.

In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7996: Fix possible oob access in mt7996_mac_write_txwi_80211() Check frame length before accessing the mgmt fields in mt7996_mac_write_txwi_80211 in order to avoid a possible oob access.

In the Linux kernel, the following vulnerability has been resolved: hwmon: (macsmc) Fix regressions in Apple Silicon SMC hwmon driver The recently added macsmc-hwmon driver contained several critical bugs in its sensor population logic and float conversion routines. Specifically: - The voltage sensor population loop used the wrong prefix ("volt-" instead of "voltage-") and incorrectly assigned sensors to the temperature sensor array (hwmon->temp.sensors) instead of the voltage sensor array (hwmon->volt.sensors). This would lead to out-of-bounds memory access or data corruption when both temperature and voltage sensors were present. - The float conversion in macsmc_hwmon_write_f32() had flawed exponent logic for values >= 2^24 and lacked masking for the mantissa, which could lead to incorrect values being written to the SMC. Fix these issues to ensure correct sensor registration and reliable manual fan control. Confirm that the reported overflow in FIELD_PREP is fixed by declaring macsmc_hwmon_write_f32() as __always_inline for a compile test.

In the Linux kernel, the following vulnerability has been resolved: ipmi: Fix use-after-free and list corruption on sender error The analysis from Breno: When the SMI sender returns an error, smi_work() delivers an error response but then jumps back to restart without cleaning up properly: 1. intf->curr_msg is not cleared, so no new message is pulled 2. newmsg still points to the message, causing sender() to be called again with the same message 3. If sender() fails again, deliver_err_response() is called with the same recv_msg that was already queued for delivery This causes list_add corruption ("list_add double add") because the recv_msg is added to the user_msgs list twice. Subsequently, the corrupted list leads to use-after-free when the memory is freed and reused, and eventually a NULL pointer dereference when accessing recv_msg->done. The buggy sequence: sender() fails -> deliver_err_response(recv_msg) // recv_msg queued for delivery -> goto restart // curr_msg not cleared! sender() fails again (same message!) -> deliver_err_response(recv_msg) // tries to queue same recv_msg -> LIST CORRUPTION Fix this by freeing the message and setting it to NULL on a send error. Also, always free the newmsg on a send error, otherwise it will leak.