CVE Database

libvips is a fast image processing library with low memory needs. The EXIF decoder within libvips versions before and including 8.18.1 was not verifying the range of EXIF tag groups before passing data to libexif, leading to a possible null pointer dereference and crash. This has been patched in version 8.18.2.

NanoMQ contains a protocol-semantics flaw in its MQTT v5 `SUBSCRIBE` handling: if a subscription entry is missing the final 1-byte `Subscription Options` field, the broker may still accept the malformed packet and install the subscription into internal broker state. Under a specific packet-length construction, the same parser flaw also causes a 1-byte out-of-bounds read that crosses the real heap allocation boundary and is detected by ASAN as a `heap-buffer-overflow`. If the consumed byte happens to look acceptable, NanoMQ may continue and append the malformed subscription entry into its internal `subinfol` state. In that case, a `SUBSCRIBE` packet that should be rejected by MQTT rules is instead treated as a successful subscription. Whether ASAN reports the bug does not depend on MQTT's logical `remain` boundary; it depends on whether the read crosses the real heap allocation boundary of the underlying message buffer. In other words, these are not two unrelated issues. They are two manifestations of the same parsing defect: by default, it appears as a semantic vulnerability, and under suitable input conditions, it also becomes a verifiable out-of-bounds read vulnerability.

The Piwigo installer in versions 16.3.0 and earlier accepts POST parameters for database configuration and writes them directly into a PHP configuration file without proper sanitization. On PHP 8+, the `addslashes()` protection is bypassed because it checks for `get_magic_quotes_gpc()`, a function removed in PHP 8.0. This allows raw user input to be interpolated directly into PHP source code. An unauthenticated attacker can inject arbitrary PHP code through POST parameters (prefix, dbpasswd, dbhost, dbname, or dbuser), which gets written to `local/config/database.inc.php` and executed on every page load.

libvips is a fast image processing library with low memory needs. On 32-bit systems in versions before and including 8.18.0, the `gifload` operation could incorrectly determine dimensions leading to an integer overflow. This has been patched in version 8.18.1.

libvips is a fast image processing library with low memory needs. The `vipsload` operation in versions before and including 8.18.0 could incorrectly determine image dimensions leading to an integer overflow and a subsequent heap-based buffer overflow. This has been patched in version 8.18.1.

dataCycle is a data management system for centrally storing, managing, searching, finding, and distributing data. In dataCycle-CORE, the module handling core processing and framework rules, before and including version 25.07.3, the application accepts unlimited password guesses against both the browser login flow and the JSON login endpoint. The source code enables Devise's `:lockable` module on the user model but explicitly disables both lock and unlock strategies, and no request throttling or rate-limiting layer was identified in the Rails code. This creates a direct online password-guessing risk: - valid user accounts can be attacked continuously without temporary lockout - the same weakness is reachable through both `/users/sign_in` and `/api/v4/auth/login` - successful guessing yields a normal session cookie in the HTML flow or a fresh JWT in the API flow - the API endpoint is especially attractive for automation because it requires no CSRF token This has been patched in version 26.06.08.

dataCycle is a data management system for centrally storing, managing, searching, finding, and distributing data. In dataCycle-CORE, the module handling core processing and framework rules, before and including version 25.07.3, a low-privileged authenticated API user can supply `forwardToUrl` and `redirectUrl` values when triggering password reset or confirmation flows. Those values are then embedded into the outgoing email workflow without host allowlisting. This creates two related abuse paths: - password reset or confirmation links can be sent to a victim with the token already attached to an attacker-controlled `forwardToUrl` - after a legitimate password reset completes, the browser is redirected to attacker-controlled `redirectUrl` In practice, this can be used for phishing, token capture, confirmation hijacking, or steering a victim from a trusted email into an attacker domain. This is patched in version 26.06.08.

dataCycle is a data management system for centrally storing, managing, searching, finding, and distributing data. In dataCycle-CORE, the module handling core processing and framework rules, before and including version 25.07.3, the application exposes server-side state changes through `GET` routes. Because browsers automatically send cookies on same-site top-level navigation and Rails does not apply CSRF protections to `GET`, an attacker can force a logged-in victim to modify application state by embedding a link, image, iframe, or redirect to one of these endpoints. This was confirmed on the target with a normal `Standard` account: a cross-site-style `GET` to `watch_lists/:id/add_item?thing_id=...` inserted content into a watch list with no CSRF token. Additional `GET` mutation routes exist in the codebase, including user impersonation for authorized admins and cache or translation state changes. This is patched in version 26.06.08.

dataCycle is a data management system for centrally storing, managing, searching, finding, and distributing data. In dataCycle-CORE, the module handling core processing and framework rules, before and including version 25.07.3, any authenticated API user who has their own access token can ask the collection API to evaluate permissions as a different user by supplying `user_email`. If the target user has collections, this can expose those collections through the API. In V4, once a collection id is known, the same controller also offers `add_item` and `remove_item` routes without any object-level `authorize!` checks, creating a likely cross-user modification path. This is patched in version 26.06.08.

dataCycle is a data management system for centrally storing, managing, searching, finding, and distributing data. In dataCycle-CORE, the module handling core processing and framework rules, before and including version 25.07.3, the documentation and static markdown renderer accepts attacker-controlled path segments and only runs them through the Rails HTML sanitizer, which does not remove directory traversal sequences. An unauthenticated attacker can traverse out of the intended `docs` or `static` directories and render arbitrary `.md` files from the application root or engine root. This is patched in version 26.06.08.

dataCycle is a data management system for centrally storing, managing, searching, finding, and distributing data. In dataCycle-CORE, the module handling core processing and framework rules, before and including version 25.07.3, a Standard user can enumerate other users' names and email addresses through `/users/search`, even though direct access to those user profiles is denied. This leaks internal staff addresses, full names, and existence of guest and external test accounts.

dataCycle is a data management system for centrally storing, managing, searching, finding, and distributing data. In dataCycle-CORE, the module handling core processing and framework rules, before and including version 25.07.3, any authenticated user can request arbitrary partials or helper-backed render functions through /remote_render. The endpoint does not restrict which partial can be rendered and does not apply controller-specific authorization before rendering the selected view. This enables a low-privileged user to retrieve server-side rendered admin content that is otherwise hidden by navigation and route checks. On the test instance, a Standard user was able to retrieve the PostgreSQL admin dashboard stats even though /admin itself redirected away. This is patched in 26.06.08.

Rejected reason: This CVE ID has been rejected or withdrawn by its CVE Numbering Authority.

Improper neutralization of input during web page generation ('cross-site scripting') vulnerability in Bifra Engineering Consulting Ltd. Q-smart NexT Poll allows Stored XSS. This issue affects Q-smart NexT Poll: before 1.8.7.

HeyForm is an open-source form builder. Prior to version 3.0.0-rc.9, `POST /api/upload` has no authentication guard, no global guard, no form-context validation, no `openToken` requirement, and no session cookie check. Any anonymous internet user can upload files (PDF, DOC/DOCX, XLS/XLSX, CSV, TXT, MP4, images, etc., up to 10 MB) and receive a permanent public URL on the HeyForm domain. The endpoint is used by both authenticated form creators and unauthenticated form submitters; because no form-context binding exists, every request to it is anonymously accepted. Version 3.0.0-rc.9 contains a patch for the issue.

HeyForm is an open-source form builder. Prior to version 3.0.0-rc.9, `completeSubmission` accepts a `hiddenFields: [{id, name, value}]` array from the submitter and stores it verbatim in `submission.hiddenFields`, without validating the supplied `id`/`name` against the form's declared `form.hiddenFields` schema. An anonymous form submitter can therefore inject arbitrary key/value pairs (including XSS payloads, fake authorization metadata, integration-relevant values) into the stored submission. These fields are subsequently forwarded as-is to every webhook integration registered on the form. Version 3.0.0-rc.9 contains a patch for the issue.

rConfig Core before 8.2.8 contains a privilege escalation vulnerability that allows authenticated users to assign arbitrary roles to any account by submitting an unvalidated role field through the Users API during user creation or profile updates. Attackers can exploit the missing allowlist validation and absent admin-level authorization check in StoreUserRequest to mass-assign the Admin role directly to the User model, granting access to privileged features. rConfig Pro and Enterprise are not affected.

An issue in FileThingie v.2.5.7 allows a remote attacker to obtain sensitive information via the ft2.php component.

Directory Traversal vulnerability in FileThingie v.2.5.7 allows a remote attacker to obtain sensitive information via a crafted request.

Mailpit is an email testing tool and API for developers. Prior to version 1.30.1, the fix for GHSA-fpxj-m5q8-fphw (CVE-2026-45710, "Mailpit: Set a default 50MB p/m limit to prevent DoS via unlimited SMTP DATA and /api/v1/send body sizes") wrapped only `POST /api/v1/send` with `http.MaxBytesReader`. The four other Mailpit JSON-body API endpoints `PUT /api/v1/messages` (SetReadStatus), `DELETE /api/v1/messages` (DeleteMessages), `PUT /api/v1/tags` (SetMessageTags), and `POST /api/v1/message/{id}/release` (ReleaseMessage) still call `json.NewDecoder(r.Body)` directly with no body-size cap and remain reachable unauthenticated in the default `docker run axllent/mailpit:latest` deploy. An unauthenticated remote attacker can post a multi-million-element `IDs` slice and drive RSS from ~25 MiB baseline to ~450 MiB per 16 MB request body. Repeating across multiple connections accumulates the same per-request amplification per process. Version 1.30.1 contains a patch.

Rust OneNote File Parser is a parser for Microsoft OneNote files implemented in Rust. Prior to version 1.1.1, a maliciously crafted `.onetoc2` table-of-contents file can cause `Parser::parse_notebook` to open arbitrary files on the host filesystem outside the notebook's directory. The parser reads entry names listed inside the `.onetoc2` and joins them against the notebook's base directory without validating that they are relative paths confined to that directory. The parser will bail out when the target file fails to parse as a OneNote section, so direct content exfiltration through the parser's return value is not practical, though file-existence probing and denial-of-service via large or special files remain possible. Anyone using `onenote_parser` to parse .onetoc2 files received from untrusted sources is affected. Users who only ever parse their own notebooks are not at meaningful risk. The issue is fixed in onenote_parser 1.1.1. The fix rejects absolute paths, parent-directory components, and other invalid path characters in entry names, and additionally canonicalises the resolved path to confirm it stays inside the notebook's base directory. For users who cannot upgrade to 1.1.1, only call `Parser::parse_notebook` on `.onetoc2` files from trusted sources. Alternatively, use `Parser::parse_section` / `Parser::parse_section_buffer` on individual .one files, which do not perform the directory walk.

lettre is a a mailer library for Rust. Starting in version 0.10.1 and prior to version 0.11.22, an inverted-boolean bug in lettre's `boring-tls` integration silently disables TLS hostname verification for callers using the default (strict) configuration. An on-path attacker presenting any chain-valid certificate for any domain can intercept SMTP submission, including PLAIN/LOGIN credentials and message contents, against any lettre user built with the `boring-tls` feature. Other TLS backends (`native-tls`, `rustls`) are unaffected. Version 0.11.22 patches the issue.

The Caddy Defender plugin is a middleware for Caddy that allows users to block or manipulate requests based on the client's IP address. Prior to version 0.10.1, Caddy Defender used `r.RemoteAddr` when evaluating whether a request should be blocked. `RemoteAddr` is the address of the immediate peer connected to Caddy. In deployments where Caddy is behind a trusted proxy, CDN, or load balancer, the immediate peer is usually the proxy, not the original client. Caddy resolves the original client address into its `client_ip` request variable after applying the configured `trusted_proxies` policy, but Defender did not use that value. As a result, clients from blocked IP ranges could bypass Defender when accessing Caddy through a trusted proxy whose own IP address was not blocked. This affects deployments that use Defender behind trusted proxies and expect it to enforce blocking based on the real client IP. The issue is fixed in version 0.10.1 by making Defender prefer Caddys resolved `client_ip` request variable when it is available. Defender falls back to `RemoteAddr` only when Caddy has not provided a resolved client IP. There is no complete workaround in affected Defender versions for deployments that rely on Caddy's trusted proxy client IP resolution. Until upgrading, affected users should enforce equivalent IP blocking at the trusted proxy, CDN, load balancer, firewall, or other edge layer before traffic reaches Caddy. Deployments where Caddy receives traffic directly from clients, without an intermediate trusted proxy, are not affected by this bypass.

@beproduct/nestjs-auth is a NestJS authentication module for BeProduct IDS (Identity Server) with OpenID Connect support. Between 2026-05-11 20:19 UTC and 22:56 UTC, an attacker used a compromised npm publish token to publish 18 malicious versions of `@beproduct/nestjs-auth` (0.1.2 through 0.1.19). The postinstall payload attempted to harvest npm tokens (from `~/.npmrc`); GitHub personal access tokens, OAuth tokens (`gho_*`), and Actions OIDC tokens; AWS credentials (from environment variables and `~/.aws/credentials`); HashiCorp Vault tokens; and other secrets present in environment variables. Version `0.1.20` is a clean republish from the original `0.1.1` source tree. Anyone who installed any version in the range `>=0.1.2 <=0.1.19` should remove the package and clean the npm cache; install the clean version; rotate every credential present in the install environment, including all npm publish tokens, all GitHub PATs and OAuth tokens, AWS access keys, HashiCorp Vault tokens, and any other secret that was in env vars or config files at install time; scan affected hosts for indicators of compromise and, if any are found, treat the host as compromised and reimage; and check committed repository history for unexpected additions in `.claude/` or `.vscode/` directories. The worm is known to commit `setup.mjs` + hook configs to PR branches via automated agent runtimes.

HeyForm is an open-source form builder. Prior to version 3.0.0-rc.7, the `/api/upload` endpoint allows unauthenticated file uploads including SVG files. Uploaded SVGs are stored in the static assets directory and served with `Content-Type: image/svg+xml` by Express's serve-static middleware, allowing an attacker to achieve stored cross-site scripting (XSS) on the heyform domain without any authentication. Version 3.0.0-rc.7 contains a patch for the issue.

Mailpit is an email testing tool and API for developers. Prior to version 1.30.0, the Mailpit SMTP server has a Server.MaxSize int field that controls the maximum allowed DATA payload size, but the field is never assigned anywhere outside test code, leaving it at Go's zero value (0 ⇒ "no limit"). The same applies to the HTTP /api/v1/send endpoint, whose request body is decoded with json.NewDecoder(r.Body) and no http.MaxBytesReader. Because Mailpit's default listeners bind [::]:1025 (SMTP) and [::]:8025 (HTTP), with no authentication required on either, a single network-reachable attacker can push an arbitrarily large message into Mailpit and watch RAM consumption spike with a ~7-10× amplification factor (raw frame → enmime envelope tree → search-text index → zstd-encoded write to SQLite). Repeating the attack — or running it concurrently from multiple connections — drives the process to OOM-kill. Version 1.30.0 contains a patch.

Mailpit is an email testing tool and API for developers. Prior to version 1.30.0, the screenshot/print proxy (/proxy?data=…) maintains a package-level assets map[string]MessageAssets cache, but reads the map without holding assetsMutex while a long-running cleanup goroutine and (re-entrant) CSS-rewriting code path concurrently write to it under the lock. When the unsynchronized read coincides with a synchronized write, Go's runtime raises fatal error: concurrent map read and map write — a runtime.throw that is not recoverable by http.Server's handler-panic recover. The whole Mailpit process exits, taking the SMTP, POP3 and HTTP listeners down with it. Version 1.30.0 contains a patch.

Mailpit is an email testing tool and API for developers. Prior to version 1.30.0, the mailpit dump --http <base-url> <out-dir> sub-command downloads every message from a remote Mailpit instance and writes each one as <id>.eml inside the user-supplied output directory. The message ID field is taken verbatim from the JSON response of the remote server and concatenated into the output path with path.Join, which silently normalizes `..` segments. A malicious HTTP server impersonating Mailpit can therefore make mailpit dump write attacker-controlled bytes to any path the running user can write, fully outside the intended output directory. Version 1.30.0 contains a patch.

Mailpit is an email testing tool and API for developers. The fix for GHSA-6jxm-fv7w-rw5j (CVE-2026-23845, "Server-Side Request Forgery (SSRF) via HTML Check API"), shipped in mailpit `v1.28.3`, hardened `internal/htmlcheck/css.go::downloadCSSToBytes` with a 5MB size cap, a `text/css` content-type check, login-info stripping in `isValidURL`, and an opt-in `--block-remote-css-and-fonts` config flag — but did not add the IP-filtering dialer that the same codebase already uses on the two sister SSRF endpoints (the proxy handler and link-check). Prior to version 1.30.0, `internal/htmlcheck/css.go::newSafeHTTPClient` is mis-named — it builds an `http.Client` whose `Transport.DialContext` calls `net.Dialer.DialContext` directly with no IP allowlisting. As a result, the SSRF originally reported by Bao Anh Phan still permits the server to dial loopback, private, link-local, and any other reserved/multicast range, provided the target replies with `HTTP/200` and a content-type beginning with `text/css`. With redirect-following (`CheckRedirect` allows redirects to any `isValidURL` URL with no IP filter), an attacker-controlled public site can redirect mailpit's request into the private network without ever appearing in the email's HTML. In the default mailpit deploy (no UI auth, no SMTP auth, port 1025/8025 exposed), this is an unauthenticated, network-reachable SSRF triggered by sending an HTML email and then issuing one HTTP `GET` to `/api/v1/message/{id}/html-check`. Version 1.30.0 contains an updated fix.

HeyForm is an open-source form builder. Prior to version 3.0.0-rc.7, a stored cross-site scripting (XSS) vulnerability in the form builder allows a low-privileged team member to inject malicious JavaScript that executes when a team owner views the form, leading to complete account takeover through privilege escalation. Version 3.0.0-rc.7 contains a patch for the issue.