CVE Database

The compiler is meant to unwrap pointers which are the operands of a memory move; a no-op interface conversion prevented the compiler from making the correct determination about non-overlapping moves, potentially leading to memory corruption at runtime.

SWIG file names containing 'cgo' and well-crafted payloads could lead to code smuggling and arbitrary code execution at build time due to trust layer bypass.

IBM Tivoli Netcool Impact 7.1.0.0 through 7.1.0.37 stores sensitive information in log files that could be read by a local user.

IBM Langflow Desktop 1.6.0 through 1.8.2 Langflow could allow an authenticated user to execute arbitrary code on the system, caused by an insecure default setting which permits the deserialization of untrusted data in the FAISS component.

IBM Verify Identity Access Container 11.0 through 11.0.2 and IBM Security Verify Access Container 10.0 through 10.0.9.1 and IBM Verify Identity Access 11.0 through 11.0.2 and IBM Security Verify Access 10.0 through 10.0.9.1 allows an attacker to contact internal authentication endpoints which are protected by the Reverse Proxy.

An out-of-bounds write issue in the virtio PCI transport in Firecracker 1.13.0 through 1.14.3 and 1.15.0 on x86_64 and aarch64 might allow a local guest user with root privileges to crash the Firecracker VMM process or potentially execute arbitrary code on the host via modification of virtio queue configuration registers after device activation. Achieving code execution on the host requires additional preconditions, such as the use of a custom guest kernel or specific snapshot configurations. To remediate this, users should upgrade to Firecracker 1.14.4 or 1.15.1 and later.

IBM Verify Identity Access Container 11.0 through 11.0.2 and IBM Security Verify Access Container 10.0 through 10.0.9.1 and IBM Verify Identity Access 11.0 through 11.0.2 and IBM Security Verify Access 10.0 through 10.0.9.1 could allow a locally authenticated user to execute malicious scripts from outside of its control sphere.

Botan is a C++ cryptography library. In 3.11.0, the function Certificate_Store::certificate_known had a misleading name; it would return true if any certificate in the store had a DN (and subject key identifier, if set) matching that of the argument. It did not check that the cert it found and the cert it was passed were actually the same certificate. In 3.11.0 an extension of path validation logic was made which assumed that certificate_known only returned true if the certificates were in fact identical. The impact is that if an end entity certificate is presented, and its DN (and subject key identifier, if set) match that of any trusted root, the end entity certificate is accepted immediately as if it itself were a trusted root. , This vulnerability is fixed in 3.11.1.

Flatpak is a Linux application sandboxing and distribution framework. Prior to 1.16.4, the caching for ld.so removes outdated cache files without properly checking that the app controlled path to the outdated cache is in the cache directory. This allows Flatpak apps to delete arbitrary files on the host. This vulnerability is fixed in 1.16.4.

Issue summary: Applications using RSASVE key encapsulation to establish a secret encryption key can send contents of an uninitialized memory buffer to a malicious peer. Impact summary: The uninitialized buffer might contain sensitive data from the previous execution of the application process which leads to sensitive data leakage to an attacker. RSA_public_encrypt() returns the number of bytes written on success and -1 on error. The affected code tests only whether the return value is non-zero. As a result, if RSA encryption fails, encapsulation can still return success to the caller, set the output lengths, and leave the caller to use the contents of the ciphertext buffer as if a valid KEM ciphertext had been produced. If applications use EVP_PKEY_encapsulate() with RSA/RSASVE on an attacker-supplied invalid RSA public key without first validating that key, then this may cause stale or uninitialized contents of the caller-provided ciphertext buffer to be disclosed to the attacker in place of the KEM ciphertext. As a workaround calling EVP_PKEY_public_check() or EVP_PKEY_public_check_quick() before EVP_PKEY_encapsulate() will mitigate the issue. The FIPS modules in 3.6, 3.5, 3.4, 3.3, 3.1 and 3.0 are affected by this issue.

Issue summary: During processing of a crafted CMS EnvelopedData message with KeyTransportRecipientInfo a NULL pointer dereference can happen. Impact summary: Applications that process attacker-controlled CMS data may crash before authentication or cryptographic operations occur resulting in Denial of Service. When a CMS EnvelopedData message that uses KeyTransportRecipientInfo with RSA-OAEP encryption is processed, the optional parameters field of RSA-OAEP SourceFunc algorithm identifier is examined without checking for its presence. This results in a NULL pointer dereference if the field is missing. Applications and services that call CMS_decrypt() on untrusted input (e.g., S/MIME processing or CMS-based protocols) are vulnerable. The FIPS modules in 3.6, 3.5, 3.4, 3.3 and 3.0 are not affected by this issue, as the affected code is outside the OpenSSL FIPS module boundary.

Issue summary: During processing of a crafted CMS EnvelopedData message with KeyAgreeRecipientInfo a NULL pointer dereference can happen. Impact summary: Applications that process attacker-controlled CMS data may crash before authentication or cryptographic operations occur resulting in Denial of Service. When a CMS EnvelopedData message that uses KeyAgreeRecipientInfo is processed, the optional parameters field of KeyEncryptionAlgorithmIdentifier is examined without checking for its presence. This results in a NULL pointer dereference if the field is missing. Applications and services that call CMS_decrypt() on untrusted input (e.g., S/MIME processing or CMS-based protocols) are vulnerable. The FIPS modules in 3.6, 3.5, 3.4, 3.3 and 3.0 are not affected by this issue, as the affected code is outside the OpenSSL FIPS module boundary.

Issue summary: When a delta CRL that contains a Delta CRL Indicator extension is processed a NULL pointer dereference might happen if the required CRL Number extension is missing. Impact summary: A NULL pointer dereference can trigger a crash which leads to a Denial of Service for an application. When CRL processing and delta CRL processing is enabled during X.509 certificate verification, the delta CRL processing does not check whether the CRL Number extension is NULL before dereferencing it. When a malformed delta CRL file is being processed, this parameter can be NULL, causing a NULL pointer dereference. Exploiting this issue requires the X509_V_FLAG_USE_DELTAS flag to be enabled in the verification context, the certificate being verified to contain a freshestCRL extension or the base CRL to have the EXFLAG_FRESHEST flag set, and an attacker to provide a malformed CRL to an application that processes it. The vulnerability is limited to Denial of Service and cannot be escalated to achieve code execution or memory disclosure. For that reason the issue was assessed as Low severity according to our Security Policy. The FIPS modules in 3.6, 3.5, 3.4, 3.3 and 3.0 are not affected by this issue, as the affected code is outside the OpenSSL FIPS module boundary.

Issue summary: An uncommon configuration of clients performing DANE TLSA-based server authentication, when paired with uncommon server DANE TLSA records, may result in a use-after-free and/or double-free on the client side. Impact summary: A use after free can have a range of potential consequences such as the corruption of valid data, crashes or execution of arbitrary code. However, the issue only affects clients that make use of TLSA records with both the PKIX-TA(0/PKIX-EE(1) certificate usages and the DANE-TA(2) certificate usage. By far the most common deployment of DANE is in SMTP MTAs for which RFC7672 recommends that clients treat as 'unusable' any TLSA records that have the PKIX certificate usages. These SMTP (or other similar) clients are not vulnerable to this issue. Conversely, any clients that support only the PKIX usages, and ignore the DANE-TA(2) usage are also not vulnerable. The client would also need to be communicating with a server that publishes a TLSA RRset with both types of TLSA records. No FIPS modules are affected by this issue, the problem code is outside the FIPS module boundary.

Issue summary: Applications using AES-CFB128 encryption or decryption on systems with AVX-512 and VAES support can trigger an out-of-bounds read of up to 15 bytes when processing partial cipher blocks. Impact summary: This out-of-bounds read may trigger a crash which leads to Denial of Service for an application if the input buffer ends at a memory page boundary and the following page is unmapped. There is no information disclosure as the over-read bytes are not written to output. The vulnerable code path is only reached when processing partial blocks (when a previous call left an incomplete block and the current call provides fewer bytes than needed to complete it). Additionally, the input buffer must be positioned at a page boundary with the following page unmapped. CFB mode is not used in TLS/DTLS protocols, which use CBC, GCM, CCM, or ChaCha20-Poly1305 instead. For these reasons the issue was assessed as Low severity according to our Security Policy. Only x86-64 systems with AVX-512 and VAES instruction support are affected. Other architectures and systems without VAES support use different code paths that are not affected. OpenSSL FIPS module in 3.6 version is affected by this issue.

mise manages dev tools like node, python, cmake, and terraform. From 2026.2.18 through 2026.4.5, mise loads trust-control settings from a local project .mise.toml before the trust check runs. An attacker who can place a malicious .mise.toml in a repository can make that same file appear trusted and then reach dangerous directives such as [env] _.source, templates, hooks, or tasks.

Podman Desktop is a graphical tool for developing on containers and Kubernetes. Prior to 1.26.2, an unauthenticated HTTP server exposed by Podman Desktop allows any network attacker to remotely trigger denial-of-service conditions and extract sensitive information. By abusing missing connection limits and timeouts, an attacker can exhaust file descriptors and kernel memory, leading to application crash or full host freeze. Additionally, verbose error responses disclose internal paths and system details (including usernames on Windows), aiding further exploitation. The issue requires no authentication or user interaction and is exploitable over the network. This vulnerability is fixed in 1.26.2.

OpenTelemetry-Go is the Go implementation of OpenTelemetry. From 1.36.0 to 1.40.0, multi-value baggage: header extraction parses each header field-value independently and aggregates members across values. This allows an attacker to amplify cpu and allocations by sending many baggage: header lines, even when each individual value is within the 8192-byte per-value parse limit. This vulnerability is fixed in 1.41.0.

A weakness has been identified in suvarchal docker-mcp-server up to 0.1.0. The impacted element is the function stop_container/remove_container/pull_image of the file src/index.ts of the component HTTP Interface. This manipulation causes os command injection. The attack is possible to be carried out remotely. The exploit has been made available to the public and could be used for attacks. The project was informed of the problem early through an issue report but has not responded yet.

A security flaw has been discovered in PowerJob 5.1.0/5.1.1/5.1.2. The affected element is the function GroovyEvaluator.evaluate of the file /openApi/addWorkflowNode of the component OpenAPI Endpoint. The manipulation of the argument nodeParams results in code injection. The attack can be executed remotely. The project was informed of the problem early through an issue report but has not responded yet.

FastFeedParser is a high performance RSS, Atom and RDF parser. Prior to 0.5.10, when parse() fetches a URL that returns an HTML page containing a <meta http-equiv="refresh"> tag, it recursively calls itself with the redirect URL — with no depth limit, no visited-URL deduplication, and no redirect count cap. An attacker-controlled server that returns an infinite chain of HTML meta-refresh responses causes unbounded recursion, exhausting the Python call stack and crashing the process. This vulnerability can also be chained with the companion SSRF issue to reach internal network targets after bypassing the initial URL check. This vulnerability is fixed in 0.5.10.

RedwoodSDK is a server-first React framework. From 1.0.0-beta.50 to 1.0.5, erver functions exported from "use server" files could be invoked via GET requests, bypassing their intended HTTP method. In cookie-authenticated applications, this allowed cross-site GET navigations to trigger state-changing functions, because browsers send SameSite=Lax cookies on top-level GET requests. This affected all server functions -- both serverAction() handlers and bare exported functions in "use server" files. This vulnerability is fixed in 1.0.6.

WWBN AVideo is an open source video platform. In versions 26.0 and prior, objects/aVideoEncoder.json.php still allows attacker-controlled downloadURL values with common media or archive extensions such as .mp4, .mp3, .zip, .jpg, .png, .gif, and .webm to bypass SSRF validation. The server then fetches the response and stores it as media content. This allows an authenticated uploader to turn the upload-by-URL flow into a reliable SSRF response-exfiltration primitive. The vulnerability is caused by an incomplete fix for CVE-2026-27732.

WWBN AVideo is an open source video platform. In versions 26.0 and prior, objects/aVideoEncoderReceiveImage.json.php allowed an authenticated uploader to fetch attacker-controlled same-origin /videos/... URLs, bypass traversal scrubbing, and expose server-local files through the GIF poster storage path. The vulnerable GIF branch could be abused to read local files such as /etc/passwd or application source files and republish those bytes through a normal public GIF media URL.

Vite is a frontend tooling framework for JavaScript. From 7.1.0 to before 7.3.2 and 8.0.5, on the Vite dev server, files that should be blocked by server.fs.deny (e.g., .env, *.crt) can be retrieved with HTTP 200 responses when query parameters such as ?raw, ?import&raw, or ?import&url&inline are appended. This vulnerability is fixed in 7.3.2 and 8.0.5.

Vite is a frontend tooling framework for JavaScript. From 6.0.0 to before 6.4.2, 7.3.2, and 8.0.5, if it is possible to connect to the Vite dev server’s WebSocket without an Origin header, an attacker can invoke fetchModule via the custom WebSocket event vite:invoke and combine file://... with ?raw (or ?inline) to retrieve the contents of arbitrary files on the server as a JavaScript string (e.g., export default "..."). The access control enforced in the HTTP request path (such as server.fs.allow) is not applied to this WebSocket-based execution path. This vulnerability is fixed in 6.4.2, 7.3.2, and 8.0.5.

OpenObserve is a cloud-native observability platform. In 0.70.3 and earlier, the validate_enrichment_url function in src/handler/http/request/enrichment_table/mod.rs fails to block IPv6 addresses because Rust's url crate returns them with surrounding brackets (e.g. "[::1]" not "::1"). An authenticated attacker can reach internal services blocked from external access. On cloud deployments this enables retrieval of IAM credentials via AWS IMDSv1 (169.254.169.254), GCP metadata, or Azure IMDS. On self-hosted deployments it allows probing internal network services.

Drizzle is a modern TypeScript ORM. Prior to 0.45.2 and 1.0.0-beta.20, Drizzle ORM improperly escaped quoted SQL identifiers in its dialect-specific escapeName() implementations. In affected versions, embedded identifier delimiters were not escaped before the identifier was wrapped in quotes or backticks. As a result, applications that pass attacker-controlled input to APIs that construct SQL identifiers or aliases, such as sql.identifier(), .as(), may allow an attacker to terminate the quoted identifier and inject SQL. This vulnerability is fixed in 0.45.2 and 1.0.0-beta.20.

PolarLearn is a free and open-source learning program. In 0-PRERELEASE-15 and earlier, POST /api/v1/auth/sign-in creates a valid session for banned accounts before verifying the supplied password. That session is then accepted across authenticated /api routes, enabling account data access and authenticated actions as the banned user.

There is a memory corruption vulnerability due to an out-of-bounds read in mgcore_SH_25_3!aligned_free() in NI LabVIEW.  This vulnerability may result in information disclosure or arbitrary code execution. Successful exploitation requires an attacker to get a user to open a specially crafted VI file. This vulnerability affects NI LabVIEW 2026 Q1 (26.1.0) and prior versions.