CVE Database

In the Linux kernel, the following vulnerability has been resolved: Input: touchwin - reset the packet index on every complete packet tw_interrupt() accumulates each non-zero serial byte into a fixed three-byte buffer with a running index that is only reset once a full packet has been received *and* the device's two Y bytes agree: tw->data[tw->idx++] = data; if (tw->idx == TW_LENGTH && tw->data[1] == tw->data[2]) { ... tw->idx = 0; } The reset is gated on tw->data[1] == tw->data[2], a value the device controls. A malicious, malfunctioning or counterfeit Touchwindow peripheral can stream non-zero bytes whose 2nd and 3rd bytes differ: the index reaches TW_LENGTH without the equality holding, is never reset, and keeps growing, so tw->data[tw->idx++] walks off the end of the three-byte array and the rest of the heap-allocated struct tw, one attacker-chosen byte at a time -- an unbounded, device-driven heap out-of-bounds write. Reset the index on every completed packet and report an event only when the two Y bytes match, like the other serio touchscreen drivers do.

In the Linux kernel, the following vulnerability has been resolved: Input: mms114 - reject an oversized device packet size mms114_interrupt() reads a packet of touch data from the device into a fixed-size on-stack buffer struct mms114_touch touch[MMS114_MAX_TOUCH]; which holds MMS114_MAX_TOUCH (10) events of MMS114_EVENT_SIZE (8) bytes, i.e. 80 bytes. The length of the I2C read into it is taken verbatim from the device: packet_size = mms114_read_reg(data, MMS114_PACKET_SIZE); if (packet_size <= 0) goto out; ... error = __mms114_read_reg(data, MMS114_INFORMATION, packet_size, (u8 *)touch); packet_size is a single device register byte (0x0F) and the only check is the lower bound packet_size <= 0; it is never bounded against the size of touch[]. A malfunctioning, malicious or counterfeit controller (or an attacker tampering with the I2C bus) can report a packet_size of up to 255, so __mms114_read_reg() writes up to 175 bytes past the end of touch[] on the IRQ-thread stack: a stack out-of-bounds write that can overwrite the stack canary, saved registers and the return address. A well-formed device never reports more than the buffer holds, so reject an oversized packet and drop the report, consistent with the handler's other error paths, rather than reading past the buffer.

In the Linux kernel, the following vulnerability has been resolved: RDMA/rtrs-srv: Bound RDMA-Write length to chunk size in rdma_write_sg When the server answers an RTRS READ, rdma_write_sg() builds the source scatter/gather entry for the IB_WR_RDMA_WRITE that returns data to the peer. Its length is taken directly from the wire descriptor: plist->length = le32_to_cpu(id->rd_msg->desc[0].len); rd_msg points into the chunk buffer that the remote peer filled via RDMA-WRITE-WITH-IMM (rtrs_srv_rdma_done() -> process_io_req() -> process_read()), so desc[0].len is attacker-controlled and, before this change, was only rejected when zero. The source address is the fixed chunk start (dma_addr[msg_id]) and the source lkey is the PD-wide local_dma_lkey, which is not tied to the chunk's MR mapping, so the verbs layer does not constrain the transfer length to max_chunk_size. msg_id and off are bounded against queue_depth and max_chunk_size in rtrs_srv_rdma_done(), but desc[0].len is a separate field that was not checked against the chunk size. A peer that advertises desc[0].len larger than max_chunk_size can make the posted RDMA write read past the chunk's mapped region. The resulting behaviour depends on the IOMMU configuration: with no IOMMU or in passthrough mode the read may extend into memory adjacent to the chunk and be returned to the peer, which can disclose host memory; with a translating IOMMU the out-of-range access is expected to fault and abort the connection. In either case the transfer exceeds what the protocol permits and is driven by a remote peer. Reject a descriptor length above max_chunk_size, mirroring the existing off >= max_chunk_size bound in rtrs_srv_rdma_done(). Legitimate clients do not exceed it: the client sets desc[0].len to its MR length, which is capped at the negotiated max_io_size (max_chunk_size - MAX_HDR_SIZE).

In the Linux kernel, the following vulnerability has been resolved: RDMA/siw: bound Read Response placement to the RREAD length In drivers/infiniband/sw/siw/siw_qp_rx.c, siw_proc_rresp() places each inbound Read Response DDP segment at sge->laddr + wqe->processed and then accumulates wqe->processed, but it never checks the running total against the sink buffer length on continuation segments. siw_check_sge() resolves and validates the sink memory only on the first fragment (the if (!*mem) branch), and siw_rresp_check_ntoh() compares the cumulative length against wqe->bytes only on the final segment (the !frx->more_ddp_segs guard). A connected siw peer that answers an outstanding RREAD with Read Response segments that keep the DDP Last flag clear, carrying more total payload than the RREAD requested, drives wqe->processed past the validated sink buffer; the next siw_rx_data() call writes out of bounds at sge->laddr + wqe->processed. siw runs iWARP over ordinary routable TCP, so the peer is the remote end of an established RDMA connection and needs no local privilege. Bound every segment before placement, exactly as siw_proc_send() and siw_proc_write() already do for their tagged and untagged paths, and terminate the connection with a base-or-bounds DDP error when the Read Response would overrun the sink buffer. This is the second receive-path length fix for this file. A separate change rejects an MPA FPDU length that underflows the per-fragment remainder in the header decode; that guard does not cover this case, because here each individual segment length is self-consistent and only the accumulated placement offset overruns the buffer.

In the Linux kernel, the following vulnerability has been resolved: fuse: avoid 32-bit prune notification count wrap FUSE_NOTIFY_PRUNE validates the nodeid payload length with: size - sizeof(outarg) != outarg.count * sizeof(u64) On 32-bit kernels, size_t is also 32 bits, so the daemon-controlled count multiplication can wrap. A prune notification with count 0x20000000 and no nodeid payload passes the check, enters the copy loop, and asks the device copy path to read nodeids that are not present in the userspace write buffer. In QEMU this reaches the fuse_copy_fill() BUG_ON(!err) path. Validate the payload length with array_size() instead. That accepts exactly the same valid messages, but avoids wrapping arithmetic before the copy loop consumes the count.

In the Linux kernel, the following vulnerability has been resolved: fuse: re-lock request before returning from fuse_ref_folio() fuse_ref_folio() unlocks the request but does not re-lock it before returning. fuse_chan_abort() can end the request and the async end callback (eg fuse_writepage_free()) can free the args while the subsequent copy chain logic after fuse_ref_folio() accesses them, leading to use-after-free issues. Fix this by locking the request in fuse_ref_folio() before returning.

In the Linux kernel, the following vulnerability has been resolved: fuse: clear intr_entry in fuse_resend and fuse_remove_pending_req When fuse_resend() moves a request from fpq->processing back to fiq->pending, it sets FR_PENDING and clears FR_SENT but does not remove the requests intr_entry from fiq->interrupts. If the request had FR_INTERRUPTED set from a prior signal, intr_entry remains dangling on fiq->interrupts. When the requesting task then receives a fatal signal, fuse_remove_pending_req() sees FR_PENDING=1, removes the request from fiq->pending and frees it via the refcount path, also without cleaning intr_entry. The stale intr_entry causes use-after-free when fuse_read_interrupt() iterates fiq->interrupts: - list_del_init(&req->intr_entry) -> UAF write on freed slab - req->in.h.unique -> UAF read, data leaked to userspace Remove intr_entry from fiq->interrupts in fuse_resend() for interrupted requests before they are placed back on fiq->pending. Add a WARN_ON if the intr_entry is not empty on request destruction.

In the Linux kernel, the following vulnerability has been resolved: fuse-uring: fix EFAULT clobber in fuse_uring_commit copy_from_user() returns the number of bytes not copied as an unsigned residual on failure (1..sizeof(struct fuse_out_header)). fuse_uring_commit stores that residual in ssize_t err, sets req->out.h.error to -EFAULT, then jumps to out: with err still holding the positive residual. err = copy_from_user(&req->out.h, &ent->headers->in_out, sizeof(req->out.h)); if (err) { req->out.h.error = -EFAULT; goto out; /* err is the positive residual */ } ... out: fuse_uring_req_end(ent, req, err); fuse_uring_req_end() then runs if (error) req->out.h.error = error; which overwrites the just-assigned -EFAULT with the positive residual. FUSE callers such as fuse_simple_request() test err < 0 to detect failure, so the positive value is interpreted as success and the caller proceeds with an uninitialised or partial req->out.args. Fix by assigning err = -EFAULT in the failure branch before jumping to out, so fuse_uring_req_end() receives a negative errno and sets req->out.h.error to -EFAULT.

In the Linux kernel, the following vulnerability has been resolved: fuse-uring: fix moving cancelled entry to ent_in_userspace list fuse_uring_cancel() moves entries that are available (these have no reqs attached) to the ent_in_userspace list. ent_list_request_expired() checks the first entry on ent_in_userspace and dereferences ent->fuse_req unconditionally, which will crash on a cancelled entry that was moved to this list. Fix this by freeing the entry and dropping queue_refs directly in fuse_uring_cancel(). This is safe because cancel is the cancel handler itself - after io_uring_cmd_done(), no more cancels will be dispatched for this command, and teardown serializes with cancel via queue->lock. Since cancel now decrements queue_refs, fuse_uring_abort() must no longer gate fuse_uring_abort_end_requests() on queue_refs > 0, as cancelled entries may have already dropped queue_refs while requests are still queued. Remove the gate so abort always flushes requests and stops queues.

In the Linux kernel, the following vulnerability has been resolved: fuse-uring: end fuse_req on io-uring cancel task work When io_uring delivers task work with tw.cancel set (PF_EXITING, PF_KTHREAD fallback, or percpu_ref_is_dying on the ring context), fuse_uring_send_in_task() takes the cancel branch, assigns -ECANCELED, and falls through to fuse_uring_send(). That path only flips the entry to FRRS_USERSPACE and completes the io_uring cmd; it never discharges the ring entry's owning reference to the fuse_req that fuse_uring_add_req_to_ring_ent() handed it at dispatch time. fuse_uring_send_in_task() tw.cancel == true err = -ECANCELED fuse_uring_send(ent, cmd, err, issue_flags) ent->state = FRRS_USERSPACE list_move(&ent->list, &queue->ent_in_userspace) ent->cmd = NULL io_uring_cmd_done(-ECANCELED) /* ent->fuse_req still set, req still hashed */ The fuse_req stays linked on fpq->processing[hash] and fuse_request_end() is never invoked. The originating syscall thread blocks in D-state in request_wait_answer() until fuse_abort_conn() runs, which can be the entire connection lifetime. For FR_BACKGROUND requests fc->num_background is never decremented either, so repeated cancels inflate the counter until max_background is hit and all later background ops stall. tw.cancel does not imply a connection abort (e.g. a single io_uring worker thread exits while the fuse connection stays up), so this cannot be left for fuse_abort_conn() to clean up. Ending the req but still routing the entry through fuse_uring_send() is not enough: that leaves a req-less entry on ent_in_userspace, and ent_list_request_expired() dereferences ent->fuse_req unconditionally on the head of that list, which would then NULL-deref. Fix the cancel branch to release the entry directly. Remove it from the queue, complete the io_uring cmd, end the fuse_req, free the entry, and drop its queue_refs (waking the teardown waiter if it was the last).

In the Linux kernel, the following vulnerability has been resolved: fuse-uring: Avoid use-after-free in fuse_uring_async_stop_queues fuse_uring_async_stop_queues() might run when the last reference on ring->queue_refs was already dropped. In order to avoid an early destruction a reference on struct fuse_conn is now taken before starting fuse_uring_async_stop_queues() and that reference is only released when that delayed work queue terminates.

In the Linux kernel, the following vulnerability has been resolved: fuse-uring: Avoid queue->stopped races and set/read that value under lock There are several readers of queue->stopped that check the value under lock, but fuse_uring_commit_fetch() did not and actually the value was not set under the lock in fuse_uring_abort_end_requests() either. Especially in fuse_uring_commit_fetch it is important to check under a lock, because due to races 'struct fuse_req' might be freed with fuse_request_end, but another thread/cpu might already do teardown work.

In the Linux kernel, the following vulnerability has been resolved: fuse-uring: make a fuse_req on SQE commit only findable after memcpy Bad userspace might try to trick us and send commit SQEs request unique / commit-id of requests that are not even send to fuse-server (io_uring_cmd_done() not called) yet. fuse_uring_commit_fetch() ends the fuse request when the ring entry has a wrong state, but that could have caused a use-after-free with the memcpy operations in fuse_uring_send_in_task(). In order to avoid such races the call of fuse_uring_add_to_pq() is moved after the copy operations and just before completing the io-uring request - malicious userspace cannot find the request anymore until all prepration work in fuse-client/kernel is completed. This also moves fuse_uring_add_to_pq() a bit up in the code to avoid a forward declaration. Also not with a preparation commit, to make it easier to back port to older kernels.

In the Linux kernel, the following vulnerability has been resolved: fuse-uring: remove request-less entries from ent_w_req_queue to fix NULL deref If a copy into the userspace ring buffer fails, a request will be terminated and fuse_uring_req_end() will set ent->fuse_req to NULL but it will leave the entry on ent_w_req_queue in FRRS_FUSE_REQ state. This can lead to a NULL deref if the request expiration logic scans ent_w_req_queue in the window before the entry is moved off it. Fix this by taking the entry off ent_w_req_queue and changing its state from FRRS_FUSE_REQ to FRRS_INVALID before terminating the request.

In the Linux kernel, the following vulnerability has been resolved: smb: client: reject overlapping data areas in SMB2 responses Commit 53b7c271f06b ("smb: client: restrict implied bcc[0] exemption to responses without data area") restricted the implied bcc[0] length exception to responses without a data area. However, the overlap handling in __smb2_calc_size() clears data_length, which can make an invalid response appear to have no data area and so qualify for the exception. Track data area overlap separately and reject such responses before applying the length compatibility exceptions.

In the Linux kernel, the following vulnerability has been resolved: xfs: don't wrap around quota ids in dqiterate LOLLM noticed that q_id is an unsigned 32-bit variable. If it happens to be set to XFS_DQ_ID_MAX due to a filesystem that actually has a dquot for ID_MAX, then this addition will truncate to zero and the iteration starts over. Fix this by casting to u64.

Catalyst::View::Wkhtmltopdf versions before 0.6.1 for Perl allow shell command injection (RCE) via PDF render options. Options are passed directly to the wkhtmltopdf command without sanitization. Any web application that passes user-controlled options such as the page_size, orientation or margins without validation allows shell command injection. Version 0.6.0 was released with an incomplete fix for this issue. Note that the wkhtmltopdf project is no longer being developed, and users of this package should migrate to alternative solutions.

The Yoast SEO – Advanced SEO with real-time guidance and built-in AI plugin for WordPress is vulnerable to Stored Cross-Site Scripting via Post Slug (post_name) in all versions up to, and including, 28.0 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with author-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. This requires pretty permalinks to be enabled, as the exploit chain depends on get_permalink() embedding the stored percent-encoded post_name in the generated URL.

The Checkout Field Editor for WooCommerce (Pro) plugin for WordPress is vulnerable to Directory Traversal in all versions up to, and including, 3.7.7 via the 'thwcfe_legacy_file' parameter. This makes it possible for authenticated attackers, with subscriber-level access and above, to read the contents of arbitrary files on the server, which can contain sensitive information.

The WPForms Pro plugin for WordPress is vulnerable to Arbitrary File Upload in all versions up to, and including, 1.10.1.1 via the ajax_chunk_upload_finalize function. This is due to the file type validation occurring after chunk metadata and file contents have already been written to disk, and the assembled file not being deleted upon validation failure. This makes it possible for unauthenticated attackers to upload files that may be executable, which makes remote code execution possible.

Knot Resolver before 6.4.1 allows remote code execution via a heap-based buffer overflow in the DoQ (DNS-over-QUIC) receive path.

Redis before 8.8.0, in the unusual case where an authenticated attacker can execute RESTORE, allows remote code execution via a RESTORE payload where the same NACK (pending entry) is referenced by more than one consumer, because deleting both consumers via XGROUP DELCONSUMER leads to a double free. NOTE: this issue exists because of an incomplete fix for CVE-2026-25243.

A flaw was found in libsoup. After a CONNECT tunnel is established through an HTTP proxy, libsoup incorrectly attaches the Proxy-Authorization header to subsequent HTTPS requests sent through that tunnel to the destination server. This allows the destination server to capture proxy credentials, leading to information disclosure.

A flaw was found in libsoup. The chunked transfer encoding parser uses a permissive parsing function for chunk sizes that silently accepts inputs violating RFC 9112, including leading whitespace, plus sign prefixes, and trailing invalid characters. When libsoup operates behind a strict frontend proxy, this parsing differential can be exploited to smuggle HTTP requests.

A flaw was found in libsoup. An unsigned integer underflow in the soup_filter_input_stream_read_until() function causes a heap buffer over-read when parsing multipart HTTP responses. A malicious HTTP server can exploit this by sending a crafted multipart response, potentially causing the client application to crash or disclose sensitive heap memory.

Weintek cMT3092X HMI allows a non-privileged user to modify tokens to escalate privileges.

Weintek cMT3092X HMI stores user account passwords in plaintext.

An attacker can modify data that should be restricted to read‑only access.

Weintek cMT3092X HMI allows a non-privileged user to modify cookies to gain elevated privileges.

An integer overflow when calculating physical offsets for sparse PMRs may result in 32-bit truncation of address computations for PMRs larger than 4 GB. This can lead to incorrect GPU MMU mappings and may allow a non-privileged user to trigger access to unintended physical memory, resulting in memory corruption or information disclosure.