CVE Database

An Improper Check for Unusual or Exceptional Conditions vulnerability in the chassis control daemon (chassisd) of Juniper Networks Junos OS on SRX1600, SRX2300 and SRX4300 allows a local attacker with low privileges to cause a complete Denial of Service (DoS). When a specific 'show chassis' CLI command is executed, chassisd crashes and restarts which causes a momentary impact to all traffic until all modules are online again. This issue affects Junos OS on SRX1600, SRX2300 and SRX4300: * 24.4 versions before 24.4R1-S3, 24.4R2. This issue does not affect Junos OS versions before 24.4R1.

A Function Call With Incorrect Argument Type vulnerability in the sensor interface of Juniper Networks Junos OS Evolved on PTX Series allows a network-based, authenticated attacker with low privileges to cause a complete Denial of Service (DoS). If colored SRTE policy tunnels are provisioned via PCEP, and gRPC is used to monitor traffic in these tunnels, evo-aftmand crashes and doesn't restart which leads to a complete and persistent service impact. The system has to be manually restarted to recover. The issue is seen only when the Originator ASN field in PCEP contains a value larger than 65,535 (32-bit ASN). The issue is not reproducible when SRTE policy tunnels are statically configured. This issue affects Junos OS Evolved on PTX Series:  * all versions before 22.4R3-S9-EVO, * 23.2 versions before 23.2R2-S6-EVO, * 23.4 versions before 23.4R2-S7-EVO, * 24.2 versions before 24.2R2-S4-EVO, * 24.4 versions before 24.4R2-S2-EVO, * 25.2 versions before 25.2R1-S2-EVO, 25.2R2-EVO.

A Missing Release of Memory after Effective Lifetime vulnerability in the DHCP daemon (jdhcpd) of Juniper Networks Junos OS on MX Series, allows an adjacent, unauthenticated attacker to cause a memory leak, that will eventually cause a complete Denial-of-Service (DoS). In a DHCPv6 over PPPoE, or DHCPv6 over VLAN with Active lease query or Bulk lease query scenario, every subscriber logout will leak a small amount of memory. When all available memory has been exhausted, jdhcpd will crash and restart which causes a complete service impact until the process has recovered. The memory usage of jdhcpd can be monitored with: user@host> show system processes extensive | match jdhcpd This issue affects Junos OS: * all versions before 22.4R3-S1, * 23.2 versions before 23.2R2, * 23.4 versions before 23.4R2.

An Improper Check for Unusual or Exceptional Conditions vulnerability in the packet forwarding engine (pfe) of Juniper Networks Junos OS on specific EX and QFX Series devices allow an unauthenticated, adjacent attacker to cause a complete Denial of Service (DoS). On EX4k, and QFX5k platforms configured as service-provider edge devices, if L2PT is enabled on the UNI and VSTP is enabled on NNI in VXLAN scenarios, receiving VSTP BPDUs on UNI leads to packet buffer allocation failures, resulting in the device to not pass traffic anymore until it is manually recovered with a restart.This issue affects Junos OS: * 24.4 releases before 24.4R2, * 25.2 releases before 25.2R1-S1, 25.2R2. This issue does not affect Junos OS releases before 24.4R1.

A Missing Release of Memory after Effective Lifetime vulnerability in the Layer 2 Address Learning Daemon (l2ald) of Juniper Networks Junos OS and Junos OS Evolved allows an adjacent, unauthenticated attacker to cause a memory leak ultimately leading to a Denial of Service (DoS). In an EVPN-MPLS scenario, routes learned from remote multi-homed Provider Edge (PE) devices are programmed as ESI routes. Due to a logic issue in the l2ald memory management, memory allocated for these routes is not released when there is churn for these routes. As a result, memory leaks in the l2ald process which will ultimately lead to a crash and restart of l2ald. Use the following command to monitor the memory consumption by l2ald: user@device> show system process extensive | match "PID|l2ald" This issue affects: Junos OS: * all versions before 22.4R3-S5, * 23.2 versions before 23.2R2-S3, * 23.4 versions before 23.4R2-S4, * 24.2 versions before 24.2R2; Junos OS Evolved: * all versions before 22.4R3-S5-EVO, * 23.2 versions before 23.2R2-S3-EVO, * 23.4 versions before 23.4R2-S4-EVO, * 24.2 versions before 24.2R2-EVO.

An Improper Following of a Certificate's Chain of Trust vulnerability in J-Web of Juniper Networks Junos OS on SRX Series allows a PITM to intercept the communication of the device and get access to confidential information and potentially modify it. When an SRX device is provisioned to connect to Security Director (SD) cloud, it doesn't perform sufficient verification of the received server certificate. This allows a PITM to intercept the communication between the SRX and SD cloud and access credentials and other sensitive information. This issue affects Junos OS: * all versions before 22.4R3-S9, * 23.2 versions before 23.2R2-S6, * 23.4 versions before 23.4R2-S7, * 24.2 versions before 24.2R2-S3, * 24.4 versions before 24.4R2-S2, * 25.2 versions before 25.2R1-S2, 25.2R2.

A Missing Authorization vulnerability in the CLI of Juniper Networks Junos OS and Junos OS Evolved allows a local user with low privileges to read sensitive information. A local user with low privileges can execute the CLI command 'show mgd' with specific arguments which will expose sensitive information. This issue affects Junos OS: * all versions before 22.4R3-S8, * 23.2 versions before 23.2R2-S6, * 23.4 versions before 23.4R2-S6, * 24.2 versions before 24.2R2-S4, * 24.4 versions before 24.4R2-S1, * 25.2 version before 25.2R1-S2, 25.2R2; Junos OS Evolved: * all versions before 23.2R2-S6-EVO, * 23.4 version before 23.4R2-S6-EVO, * 24.2 version before 24.2R2-S4-EVO, * 24.4 versions before 24.4R2-S1-EVO, * 25.2 versions before 25.2R2-EVO.

A Missing Release of Memory after Effective Lifetime vulnerability in the BroadBand Edge subscriber management daemon (bbe-smgd) of Juniper Networks Junos OS on MX Series allows an adjacent, unauthenticated attacker to cause a Denial of Service (DoS). If the authentication packet-type option is configured and a received packet does not match that packet type, the memory leak occurs. When all memory available to bbe-smgd has been consumed, no new subscribers will be able to login. The memory utilization of bbe-smgd can be monitored with the following show command: user@host> show system processes extensive | match bbe-smgd The below log message can be observed when this limit has been reached: bbesmgd[<PID>]: %DAEMON-3-SMD_DPROF_RSMON_ERROR: Resource unavailability, Reason: Daemon Heap Memory exhaustion This issue affects Junos OS on MX Series: * all versions before 22.4R3-S8, * 23.2 versions before 23.2R2-S5, * 23.4 versions before 23.4R2-S6, * 24.2 versions before 24.2R2-S2, * 24.4 versions before 24.4R2, * 25.2 versions before 25.2R2.

An Improper Check for Unusual or Exceptional Conditions vulnerability in the packet forwarding engine (pfe) of Juniper Networks Junos OS on MX Series allows an unauthenticated, network-based attacker to bypass the configured firewall filter and access the control-plane of the device. On MX platforms with MPC10, MPC11, LC4800 or LC9600 line cards, and MX304, firewall filters applied on a loopback interface lo0.n (where n is a non-0 number) don't get executed when lo0.n is in the global VRF / default routing-instance. An affected configuration would be: user@host# show configuration interfaces lo0 | display set set interfaces lo0 unit 1 family inet filter input <filter-name> where a firewall filter is applied to a non-0 loopback interface, but that loopback interface is not referred to in any routing-instance (RI) configuration, which implies that it's used in the default RI. The issue can be observed with the CLI command: user@device> show firewall counter filter <filter_name> not showing any matches. This issue affects Junos OS on MX Series: * all versions before 23.2R2-S6, * 23.4 versions before 23.4R2-S7, * 24.2 versions before 24.2R2, * 24.4 versions before 24.4R2.

An Incorrect Initialization of Resource vulnerability in the packet forwarding engine (pfe) of Juniper Networks Junos OS on specific EX Series and QFX Series device allows an unauthenticated, network-based attacker to cause an integrity impact to downstream networks. When the same family inet or inet6 filter is applied on an IRB interface and on a physical interface as egress filter on EX4100, EX4400, EX4650 and QFX5120 devices, only one of the two filters will be applied, which can lead to traffic being sent out one of these interfaces which should have been blocked. This issue affects Junos OS on EX Series and QFX Series: * 23.4 version 23.4R2-S6, * 24.2 version 24.2R2-S3. No other Junos OS versions are affected.

An Incorrect Synchronization vulnerability in the management daemon (mgd) of Juniper Networks Junos OS and Junos OS Evolved allows a network-based attacker with low privileges to cause a complete Denial-of-Service (DoS) of the management plane. When NETCONF sessions are quickly established and disconnected, a locking issue causes mgd processes to hang in an unusable state. When the maximum number of mgd processes has been reached, no new logins are possible. This leads to the inability to manage the device and requires a power-cycle to recover. This issue can be monitored by checking for mgd processes in lockf state in the output of 'show system processes extensive': user@host> show system processes extensive | match mgd <pid> root       20   0 501M 4640K lockf   1 0:01 0.00% mgd If the system still can be accessed (either via the CLI or as root, which might still be possible as last resort as this won't invoke mgd), mgd processes in this state can be killed with 'request system process terminate <PID>' from the CLI or with 'kill -9 <PID>' from the shell.  This issue affects: Junos OS: * 23.4 versions before 23.4R2-S4, * 24.2 versions before 24.2R2-S1, * 24.4 versions before 24.4R1-S3, 24.4R2; This issue does not affect Junos OS versions before 23.4R1; Junos OS Evolved: * 23.4 versions before 23.4R2-S5-EVO, * 24.2 versions before 24.2R2-S1-EVO, * 24.4 versions before 24.4R1-S3-EVO, 24.4R2-EVO. This issue does not affect Junos OS Evolved versions before 23.4R1-EVO;

A Permissive List of Allowed Input vulnerability in the CLI of Juniper Networks Support Insights (JSI) Virtual Lightweight Collector (vLWC) allows a local, high privileged attacker to escalate their privileges to root. The CLI menu accepts input without carefully validating it, which allows for shell command injection. These shell commands are executed with root permissions and can be used to gain complete control of the system. This issue affects all JSI vLWC versions before 3.0.94.

An Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in Juniper Networks Junos Space allows an attacker to inject script tags in the list filter field that, when visited by another user, enables the attacker to execute commands with the target's permissions, including an administrator. This issue affects all versions of Junos Space before 24.1R5 Patch V3.

A Buffer Copy without Checking Size of Input ('Classic Buffer Overflow') vulnerability in the advanced forwarding toolkit (evo-aftmand/evo-pfemand) of Juniper Networks Junos OS Evolved on PTX Series or QFX5000 Series allows an unauthenticated, adjacent attacker to cause a Denial of Service (DoS).An attacker sending crafted multicast packets will cause line cards running evo-aftmand/evo-pfemand to crash and restart or non-line card devices to crash and restart. Continued receipt and processing of these packets will sustain the Denial of Service (DoS) condition. This issue affects Junos OS Evolved PTX Series: * All versions before 22.4R3-S8-EVO, * from 23.2 before 23.2R2-S5-EVO, * from 23.4 before 23.4R2-EVO, * from 24.2 before 24.2R2-EVO, * from 24.4 before 24.4R2-EVO. This issue affects Junos OS Evolved on QFX5000 Series: * 22.2-EVO version before 22.2R3-S7-EVO, * 22.4-EVO version before 22.4R3-S7-EVO, * 23.2-EVO versions before 23.2R2-S4-EVO, * 23.4-EVO versions before 23.4R2-S5-EVO, * 24.2-EVO versions before 24.2R2-S1-EVO, * 24.4-EVO versions before 24.4R1-S3-EVO, 24.4R2-EVO. This issue does not affect Junos OS Evolved on QFX5000 Series versions before: 21.2R2-S1-EVO, 21.2R3-EVO, 21.3R2-EVO, 21.4R1-EVO, and 22.1R1-EVO.

SiYuan is a personal knowledge management system. Prior to 3.6.4, SiYuan configures Mermaid.js with securityLevel: "loose" and htmlLabels: true. In this mode, <img> tags with src attributes survive Mermaid's internal DOMPurify and land in SVG <foreignObject> blocks. The SVG is injected via innerHTML with no secondary sanitization. When a victim opens a note containing a malicious Mermaid diagram, the Electron client fetches the URL. On Windows, a protocol-relative URL (//attacker.com/image.png) resolves as a UNC path (\\attacker.com\image.png). Windows attempts SMB authentication automatically, sending the victim's NTLMv2 hash to the attacker. This vulnerability is fixed in 3.6.4.

Helm is a package manager for Charts for Kubernetes. In Helm versions <=3.20.1 and <=4.1.3, a specially crafted Chart will cause helm pull --untar [chart URL | repo/chartname] to write the Chart's contents to the immediate output directory (as defaulted to the current working directory; or as given by the --destination and --untardir flags), rather than the expected output directory suffixed by the chart's name. This vulnerability is fixed in 3.20.2 and 4.1.4.

Joomla HikaShop 4.7.4 contains a reflected cross-site scripting vulnerability that allows unauthenticated attackers to inject malicious scripts by manipulating GET parameters in the product filter endpoint. Attackers can craft malicious URLs containing XSS payloads in the from_option, from_ctrl, from_task, or from_itemid parameters to steal session tokens or login credentials when victims visit the link.

Joomla Solidres 2.13.3 contains a reflected cross-site scripting vulnerability that allows unauthenticated attackers to inject malicious scripts by manipulating multiple GET parameters including show, reviews, type_id, distance, facilities, categories, prices, location, and Itemid. Attackers can craft malicious URLs containing JavaScript payloads in these parameters to steal session tokens, login credentials, or manipulate site content when victims visit the crafted links.

Joomla VirtueMart Shopping-Cart 4.0.12 contains a reflected cross-site scripting vulnerability that allows attackers to inject malicious scripts by manipulating the keyword parameter. Attackers can craft malicious URLs containing script payloads in the keyword parameter of the product-variants endpoint to execute arbitrary JavaScript in victim browsers and steal session tokens or credentials.

Joomla iProperty Real Estate 4.1.1 contains a reflected cross-site scripting vulnerability that allows attackers to inject malicious scripts by manipulating the filter_keyword parameter. Attackers can craft URLs containing JavaScript payloads in the filter_keyword GET parameter of the all-properties-with-map endpoint to execute arbitrary code in victim browsers and steal session tokens or credentials.

Joomla JLex Review 6.0.1 contains a reflected cross-site scripting vulnerability that allows attackers to inject malicious scripts by manipulating the review_id URL parameter. Attackers can craft malicious links containing JavaScript payloads that execute in victims' browsers when clicked, enabling session hijacking or credential theft.

WordPress adivaha Travel Plugin 2.3 contains a reflected cross-site scripting vulnerability that allows unauthenticated attackers to inject malicious scripts by manipulating the isMobile parameter. Attackers can craft malicious URLs containing JavaScript payloads in the isMobile GET parameter at the /mobile-app/v3/ endpoint to execute arbitrary code in victims' browsers and steal session tokens or credentials.

LangChain is a framework for building agents and LLM-powered applications. Prior to 0.3.84 and 1.2.28, LangChain's f-string prompt-template validation was incomplete in two respects. First, some prompt template classes accepted f-string templates and formatted them without enforcing the same attribute-access validation as PromptTemplate. In particular, DictPromptTemplate and ImagePromptTemplate could accept templates containing attribute access or indexing expressions and subsequently evaluate those expressions during formatting. Second, f-string validation based on parsed top-level field names did not reject nested replacement fields inside format specifiers. In this pattern, the nested replacement field appears in the format specifier rather than in the top-level field name. As a result, earlier validation based on parsed field names did not reject the template even though Python formatting would still attempt to resolve the nested expression at runtime. This vulnerability is fixed in 0.3.84 and 1.2.28.

flatpak-builder is a tool to build flatpaks from source. From 1.4.5 to before 1.4.8, the license-files manifest key takes an array of paths to user defined licence files relative to the source directory of the module. The paths from that array are resolved using g_file_resolve_relative_path() and validated to stay inside the source directory using two checks - g_file_get_relative_path() which does not resolve symlinks and g_file_query_file_type() with G_FILE_QUERY_INFO_NOFOLLOW_SYMLINKS which only applies to the final path component. The copy operation runs on host. This can be exploited by using a crafted manifest and/or source to read arbitrary files from the host and capture them into the build output. This vulnerability is fixed in 1.4.8.

Apollo MCP Server is a Model Context Protocol server that exposes GraphQL operations as MCP tools. Prior to version 1.7.0, the Apollo MCP Server did not validate the Host header on incoming HTTP requests when using StreamableHTTP transport. In configurations where an HTTP-based MCP server is run on localhost without additional authentication or network-level controls, this could potentially allow a malicious website—visited by a user running the server locally—to use DNS rebinding techniques to bypass same-origin policy restrictions and issue requests to the local MCP server. If successfully exploited, this could allow an attacker to invoke tools or access resources exposed by the MCP server on behalf of the local user. This issue is limited to HTTP-based transport modes (StreamableHTTP). It does not affect servers using stdio transport. The practical risk is further reduced in deployments that use authentication, network-level access controls, or are not bound to localhost. This vulnerability is fixed in 1.7.0.

CLIENT_CERT authentication does not fail as expected for some scenarios when soft fail is disabled and FFM is used in Apache Tomcat. This issue affects Apache Tomcat: from 11.0.0-M14 through 11.0.20, from 10.1.22 through 10.1.53, from 9.0.92 through 9.0.116. Users are recommended to upgrade to version 11.0.21, 10.1.54 or 9.0.117, which fixes the issue.

Improper Input Validation vulnerability in Apache Tomcat due to an incomplete fix of CVE-2025-66614. This issue affects Apache Tomcat: from 11.0.15 through 11.0.19, from 10.1.50 through 10.1.52, from 9.0.113 through 9.0.115. Users are recommended to upgrade to version 11.0.20, 10.1.53 or 9.0.116, which fix the issue.

Occasional URL redirection to untrusted Site ('Open Redirect') vulnerability in Apache Tomcat via the LoadBalancerDrainingValve. This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.18, from 10.1.0-M1 through 10.1.52, from 9.0.0.M23 through 9.0.115, from 8.5.30 through 8.5.100. Other, unsupported versions may also be affected Users are recommended to upgrade to version 11.0.20, 10.1.53 or 9.0.116, which fix the issue.

Wasmtime is a runtime for WebAssembly. Prior to 24.0.7, 36.0.7, 42.0.2, and 43.0.1, Wasmtime's implementation of transcoding strings between components contains a bug where the return value of a guest component's realloc is not validated before the host attempts to write through the pointer. This enables a guest to cause the host to write arbitrary transcoded string bytes to an arbitrary location up to 4GiB away from the base of linear memory. These writes on the host could hit unmapped memory or could corrupt host data structures depending on Wasmtime's configuration. Wasmtime by default reserves 4GiB of virtual memory for a guest's linear memory meaning that this bug will by default on hosts cause the host to hit unmapped memory and abort the process due to an unhandled fault. Wasmtime can be configured, however, to reserve less memory for a guest and to remove all guard pages, so some configurations of Wasmtime may lead to corruption of data outside of a guest's linear memory, such as host data structures or other guests's linear memories. This vulnerability is fixed in 24.0.7, 36.0.7, 42.0.2, and 43.0.1.

Wasmtime is a runtime for WebAssembly. From 28.0.0 to before 36.0.7, 42.0.2, and 43.0.1, Wasmtime's implementation of its pooling allocator contains a bug where in certain configurations the contents of linear memory can be leaked from one instance to the next. The implementation of resetting the virtual memory permissions for linear memory used the wrong predicate to determine if resetting was necessary, where the compilation process used a different predicate. This divergence meant that the pooling allocator incorrectly deduced at runtime that resetting virtual memory permissions was not necessary while compile-time determine that virtual memory could be relied upon. The pooling allocator must be in use, Config::memory_guard_size configuration option must be 0, Config::memory_reservation configuration must be less than 4GiB, and pooling allocator must be configured with max_memory_size the same as the memory_reservation value in order to exploit this vulnerability. If all of these conditions are applicable then when a linear memory is reused the VM permissions of the previous iteration are not reset. This means that the compiled code, which is assuming out-of-bounds loads will segfault, will not actually segfault and can read the previous contents of linear memory if it was previously mapped. This represents a data leakage vulnerability between guest WebAssembly instances which breaks WebAssembly's semantics and additionally breaks the sandbox that Wasmtime provides. Wasmtime is not vulnerable to this issue with its default settings, nor with the default settings of the pooling allocator, but embeddings are still allowed to configure these values to cause this vulnerability. This vulnerability is fixed in 36.0.7, 42.0.2, and 43.0.1.