CVE Database

OpenClaw before 2026.4.20 contains an improper authorization vulnerability in paired-device pairing management that allows limited-scope sessions to enumerate and act on pairing requests. Attackers with paired-device access can approve or operate on unrelated pending device requests within the same gateway scope.

OpenClaw before 2026.4.20 contains a scope enforcement bypass vulnerability in the assistant-media route that allows trusted-proxy callers without operator.read scope to access protected assistant-media files and metadata. Attackers can bypass identity-bearing HTTP auth path scope validation to retrieve sensitive media content within allowed media roots.

OpenTelemetry dotnet is a dotnet telemetry framework. From 1.13.1 to before 1.15.2, When exporting telemetry over gRPC using the OpenTelemetry Protocol (OTLP), the exporter may parse a server-provided grpc-status-details-bin trailer during retry handling. Prior to the fix, a malformed trailer could encode an extremely large length-delimited protobuf field which was used directly for allocation, allowing excessive memory allocation and potential denial of service (DoS). This vulnerability is fixed in 1.15.2.

OpenTelemetry dotnet is a dotnet telemetry framework. From 1.13.1 to before 1.15.2, When exporting telemetry to a back-end/collector over gRPC or HTTP using OpenTelemetry Protocol format (OTLP), if the request results in a unsuccessful request (i.e. HTTP 4xx or 5xx), the response is read into memory with no upper-bound on the number of bytes consumed. This could cause memory exhaustion in the consuming application if the configured back-end/collector endpoint is attacker-controlled (or a network attacker can MitM the connection) and an extremely large body is returned by the response. This vulnerability is fixed in 1.15.2.

An issue was discovered in ToToLink A3300R firmware v17.0.0cu.557_B20221024 allowing attackers to execute arbitrary commands via the stunPort parameter to /cgi-bin/cstecgi.cgi.

An issue was discovered in ToToLink A3300R firmware v17.0.0cu.557_B20221024 allowing attackers to execute arbitrary commands via the stun_user parameter to /cgi-bin/cstecgi.cgi.

An issue was discovered in ToToLink A3300R firmware v17.0.0cu.557_B20221024 allowing attackers to execute arbitrary commands via the informEnable parameter to /cgi-bin/cstecgi.cgi.

An issue was discovered in ToToLink A3300R firmware v17.0.0cu.557_B20221024 allowing attackers to execute arbitrary commands via the user parameter to /cgi-bin/cstecgi.cgi.

An issue was discovered in ToToLink A3300R firmware v17.0.0cu.557_B20221024 allowing attackers to execute arbitrary commands via the url parameter to /cgi-bin/cstecgi.cgi.

An issue was discovered in ToToLink A3300R firmware v17.0.0cu.557_B20221024 allowing attackers to execute arbitrary commands via the pppoeServiceName parameter to /cgi-bin/cstecgi.cgi.

An issue was discovered in ToToLink A3300R firmware v17.0.0cu.557_B20221024 allowing attackers to execute arbitrary commands via the pppoeMtu parameter to /cgi-bin/cstecgi.cgi.

An issue was discovered in ToToLink A3300R firmware v17.0.0cu.557_B20221024 allowing attackers to execute arbitrary commands via the provider parameter to /cgi-bin/cstecgi.cgi.

An issue was discovered in ToToLink A3300R firmware v17.0.0cu.557_B20221024 allowing attackers to execute arbitrary commands via the password parameter to /cgi-bin/cstecgi.cgi.

DOMPurify is a DOM-only cross-site scripting sanitizer for HTML, MathML, and SVG. Versions prior to 3.4.0 have an inconsistency between FORBID_TAGS and FORBID_ATTR handling when function-based ADD_TAGS is used. Commit c361baa added an early exit for FORBID_ATTR at line 1214. The same fix was not applied to FORBID_TAGS. At line 1118-1123, when EXTRA_ELEMENT_HANDLING.tagCheck returns true, the short-circuit evaluation skips the FORBID_TAGS check entirely. This allows forbidden elements to survive sanitization with their attributes intact. Version 3.4.0 patches the issue.

DOMPurify is a DOM-only cross-site scripting sanitizer for HTML, MathML, and SVG. Starting in version 1.0.10 and prior to version 3.4.0, `SAFE_FOR_TEMPLATES` strips `{{...}}` expressions from untrusted HTML. This works in string mode but not with `RETURN_DOM` or `RETURN_DOM_FRAGMENT`, allowing XSS via template-evaluating frameworks like Vue 2. Version 3.4.0 patches the issue.

DOMPurify is a DOM-only cross-site scripting sanitizer for HTML, MathML, and SVG. Versions 3.0.1 through 3.3.3 are vulnerable to a prototype pollution-based XSS bypass. When an application uses `DOMPurify.sanitize()` with the default configuration (no `CUSTOM_ELEMENT_HANDLING` option), a prior prototype pollution gadget can inject permissive `tagNameCheck` and `attributeNameCheck` regex values into `Object.prototype`, causing DOMPurify to allow arbitrary custom elements with arbitrary attributes — including event handlers — through sanitization. Version 3.4.0 fixes the issue.

ntfy before 2.22.0 allows SSRF because of an unanchored regular expression for web push endpoint URLs.

An API design flaw in WebKitGTK and WPE WebKit allows untrusted web content to unexpectedly perform IP connections, DNS lookups, and HTTP requests. Applications expect to use the WebPage::send-request signal handler to approve or reject all network requests. However, certain types of HTTP requests bypass this signal handler.

Multiple uses of uninitialized variables were found in libopensc that may lead to information disclosure or application crash. An attack requires a crafted USB device or smart card that would present the system with specially crafted responses to the APDUs

In the Linux kernel, the following vulnerability has been resolved: ipv4: nexthop: allocate skb dynamically in rtm_get_nexthop() When querying a nexthop object via RTM_GETNEXTHOP, the kernel currently allocates a fixed-size skb using NLMSG_GOODSIZE. While sufficient for single nexthops and small Equal-Cost Multi-Path groups, this fixed allocation fails for large nexthop groups like 512 nexthops. This results in the following warning splat: WARNING: net/ipv4/nexthop.c:3395 at rtm_get_nexthop+0x176/0x1c0, CPU#20: rep/4608 [...] RIP: 0010:rtm_get_nexthop (net/ipv4/nexthop.c:3395) [...] Call Trace: <TASK> rtnetlink_rcv_msg (net/core/rtnetlink.c:6989) netlink_rcv_skb (net/netlink/af_netlink.c:2550) netlink_unicast (net/netlink/af_netlink.c:1319 net/netlink/af_netlink.c:1344) netlink_sendmsg (net/netlink/af_netlink.c:1894) ____sys_sendmsg (net/socket.c:721 net/socket.c:736 net/socket.c:2585) ___sys_sendmsg (net/socket.c:2641) __sys_sendmsg (net/socket.c:2671) do_syscall_64 (arch/x86/entry/syscall_64.c:63 arch/x86/entry/syscall_64.c:94) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) </TASK> Fix this by allocating the size dynamically using nh_nlmsg_size() and using nlmsg_new(), this is consistent with nexthop_notify() behavior. In addition, adjust nh_nlmsg_size_grp() so it calculates the size needed based on flags passed. While at it, also add the size of NHA_FDB for nexthop group size calculation as it was missing too. This cannot be reproduced via iproute2 as the group size is currently limited and the command fails as follows: addattr_l ERROR: message exceeded bound of 1048

Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in Magepeople inc. Taxi Booking Manager for WooCommerce allows Stored XSS.This issue affects Taxi Booking Manager for WooCommerce: from n/a through 2.0.0.

Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in Rescue Themes Rescue Shortcodes allows Stored XSS.This issue affects Rescue Shortcodes: from n/a through 3.3.

Missing Authorization vulnerability in Navneil Naicker ACF Galerie 4 allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects ACF Galerie 4: from n/a through 1.4.2.

The HT Mega Addons for Elementor WordPress plugin before 3.0.7 contains an unauthenticated AJAX action returning some PII (such as full name, city, state and country) of customers who placed orders in the last 7 days

EfficientLab Controlio before v1.3.95 contains a DLL hijacking vulnerability caused by weak folder permissions in the installation directory. A local attacker can place a specially crafted DLL in this directory and achieve arbitrary code execution with highest privileges, because the affected service runs as NT AUTHORITY\SYSTEM.

Libgcrypt before 1.12.2 mishandles Dilithium signing. Writes to a static array lack a bounds check but do not use attacker-controlled data.

Libgcrypt before 1.12.2 sometimes allows a heap-based buffer overflow and denial of service via crafted ECDH ciphertext to gcry_pk_decrypt.

Froxlor is open source server administration software. Prior to version 2.3.6, in `Domains.add()`, the `adminid` parameter is accepted from user input and used without validation when the calling reseller does not have the `customers_see_all` permission. This allows a reseller to attribute newly created domains to any other admin, bypassing their own domain quota (since the wrong admin's `domains_used` counter is incremented) and potentially exhausting another admin's quota. Version 2.3.6 fixes the issue.

Froxlor is open source server administration software. Prior to version 2.3.6, in `EmailSender::add()`, the domain ownership validation for full email sender aliases uses the wrong array index when splitting the email address, passing the local part instead of the domain to `validateLocalDomainOwnership()`. This causes the ownership check to always pass for non-existent "domains," allowing any authenticated customer to add sender aliases for email addresses on domains belonging to other customers. Postfix's `sender_login_maps` then authorizes the attacker to send emails as those addresses. Version 2.3.6 fixes the issue.

CMS ALAYA provided by KANATA Limited contains an SQL injection vulnerability. Information stored in the database may be obtained or altered by an attacker with access to the administrative interface.