CVE Database

An origin validation error vulnerability in the Trend Micro Apex One (mac) agent self-protection mechanism could allow a local attacker to escalate privileges on affected installations. Please note: an attacker must first obtain the ability to execute low-privileged code on the target system in order to exploit this vulnerability. The following information is provided as informational only for CVE references, as these were addressed already via ActiveUpdate/SaaS updates in mid to late 2025 (SaaS 2507 & 2005 Yearly Release).

A time-of-check time-of-use vulnerability in the Trend Micro Apex One (mac) agent cache mechanism could allow a local attacker to escalate privileges on affected installations. Please note: an attacker must first obtain the ability to execute low-privileged code on the target system in order to exploit this vulnerability. The following information is provided as informational only for CVE references, as these were addressed already via ActiveUpdate/SaaS updates in mid to late 2025 (SaaS 2507 & 2005 Yearly Release).

A time-of-check time-of-use vulnerability in the Trend Micro Apex One (mac) agent iCore service signature verification could allow a local attacker to escalate privileges on affected installations. Please note: an attacker must first obtain the ability to execute low-privileged code on the target system in order to exploit this vulnerability. The following information is provided as informational only for CVE references, as these were addressed already via ActiveUpdate/SaaS updates in mid to late 2025 (SaaS 2507 & 2005 Yearly Release).

An origin validation error vulnerability in the Trend Micro Apex One (mac) agent iCore service could allow a local attacker to escalate privileges on affected installations. Please note: an attacker must first obtain the ability to execute low-privileged code on the target system in order to exploit this vulnerability. The following information is provided as informational only for CVE references, as these were addressed already via ActiveUpdate/SaaS updates in mid to late 2025 (SaaS 2507 & 2005 Yearly Release).

An origin validation error vulnerability in Trend Micro Apex One could allow a local attacker to escalate privileges on affected installations. Please note: an attacker must first obtain the ability to execute low-privileged code on the target system in order to exploit this vulnerability.

A link following vulnerability in the Trend Micro Apex One scan engine could allow a local attacker to escalate privileges on affected installations. Please note: an attacker must first obtain the ability to execute low-privileged code on the target system in order to exploit this vulnerability.

Authorization bypass through User-Controlled key vulnerability in PosCube Hardware Software and Consulting Ltd. QR Menu allows Exploitation of Trusted Identifiers. This issue affects QR Menu: through 21052026. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

Exposure of private personal information to an unauthorized actor, Insufficiently Protected Credentials vulnerability in Digital Operations Services Inc. WifiBurada allows Authentication Bypass. This issue affects WifiBurada: through 21052026. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

(Externally Controlled Reference to a Resource in Another Sphere), (Authorization Bypass Through User-Controlled Key) vulnerability in Apache Camel K. Authorized users in a Kubernetes namespace can create a Build resource, controlling the Pod generation in a namespace of their choice, including the operator namespace. This issue affects Apache Camel K: from 2.0.0 before 2.8.1, from 2.9.0 before 2.9.2, from 2.10.0 before 2.10.1. Users are recommended to upgrade to version 2.10.1 (or 2.8.1 or 2.9.2), which fixes the issue.

In the Linux kernel, the following vulnerability has been resolved: net/rds: handle zerocopy send cleanup before the message is queued A zerocopy send can fail after user pages have been pinned but before the message is attached to the sending socket. The purge path currently infers zerocopy state from rm->m_rs, so an unqueued message can be cleaned up as if it owned normal payload pages. However, zerocopy ownership is really determined by the presence of op_mmp_znotifier, regardless of whether the message has reached the socket queue. Capture op_mmp_znotifier up front in rds_message_purge() and use it as the cleanup discriminator. If the message is already associated with a socket, keep the existing completion path. Otherwise, drop the pinned page accounting directly and release the notifier before putting the payload pages. This keeps early send failure cleanup consistent with the zerocopy lifetime rules without changing the normal queued completion path.

In the Linux kernel, the following vulnerability has been resolved: rtmutex: Use waiter::task instead of current in remove_waiter() remove_waiter() is used by the slowlock paths, but it is also used for proxy-lock rollback in rt_mutex_start_proxy_lock() when invoked from futex_requeue(). In the latter case waiter::task is not current, but remove_waiter() operates on current for the dequeue operation. That results in several problems: 1) the rbtree dequeue happens without waiter::task::pi_lock being held 2) the waiter task's pi_blocked_on state is not cleared, which leaves a dangling pointer primed for UAF around. 3) rt_mutex_adjust_prio_chain() operates on the wrong top priority waiter task Use waiter::task instead of current in all related operations in remove_waiter() to cure those problems. [ tglx: Fixup rt_mutex_adjust_prio_chain(), add a comment and amend the changelog ]

In the Linux kernel, the following vulnerability has been resolved: accel/ivpu: Disallow re-exporting imported GEM objects Prevent re-exporting of imported GEM buffers by adding a custom prime_handle_to_fd callback that checks if the object is imported and returns -EOPNOTSUPP if so. Re-exporting imported GEM buffers causes loss of buffer flags settings, leading to incorrect device access and data corruption.

In the Linux kernel, the following vulnerability has been resolved: fbdev: udlfb: add vm_ops to dlfb_ops_mmap to prevent use-after-free dlfb_ops_mmap() uses remap_pfn_range() to map vmalloc framebuffer pages to userspace but sets no vm_ops on the VMA. This means the kernel cannot track active mmaps. When dlfb_realloc_framebuffer() replaces the backing buffer via FBIOPUT_VSCREENINFO, existing mmap PTEs are not invalidated. On USB disconnect, dlfb_ops_destroy() calls vfree() on the old pages while userspace PTEs still reference them, resulting in a use-after-free: the process retains read/write access to freed kernel pages. Add vm_operations_struct with open/close callbacks that maintain an atomic mmap_count on struct dlfb_data. In dlfb_realloc_framebuffer(), check mmap_count and return -EBUSY if the buffer is currently mapped, preventing buffer replacement while userspace holds stale PTEs. Tested with PoC using dummy_hcd + raw_gadget USB device emulation.

In the Linux kernel, the following vulnerability has been resolved: net: wwan: t7xx: validate port_count against message length in t7xx_port_enum_msg_handler t7xx_port_enum_msg_handler() uses the modem-supplied port_count field as a loop bound over port_msg->data[] without checking that the message buffer contains sufficient data. A modem sending port_count=65535 in a 12-byte buffer triggers a slab-out-of-bounds read of up to 262140 bytes. Add a sizeof(*port_msg) check before accessing the port message header fields to guard against undersized messages. Add a struct_size() check after extracting port_count and before the loop. In t7xx_parse_host_rt_data(), guard the rt_feature header read with a remaining-buffer check before accessing data_len, validate feat_data_len against the actual remaining buffer to prevent OOB reads and signed integer overflow on offset. Pass msg_len from both call sites: skb->len at the DPMAIF path after skb_pull(), and the validated feat_data_len at the handshake path.

In the Linux kernel, the following vulnerability has been resolved: net/rds: reset op_nents when zerocopy page pin fails When iov_iter_get_pages2() fails in rds_message_zcopy_from_user(), the pinned pages are released with put_page(), and rm->data.op_mmp_znotifier is cleared. But we fail to properly clear rm->data.op_nents. Later when rds_message_purge() is called from rds_sendmsg() the cleanup loop iterates over the incorrectly non zero number of op_nents and frees them again. Fix this by properly resetting op_nents when it should be in rds_message_zcopy_from_user().

When bsdinstall or bsdconfig are prompted to scan for nearby Wi-Fi networks, they build up a list of network names and use bsddialog(1) to prompt the user to select a network. This is implemented using a shell script, and the code which handled network names was not careful to prevent expansion by the shell. As a result, a suitably crafted network name can be used to execute commands via a subshell. The problem can be exploited to execute code as root on the system running bsdinstall or bsdconfig. The attacker would need to create an access point with a specially crafted name and be within range of a Wi-Fi scan. Note that bsdinstall and bsdconfig are vulnerable as soon as the user prompts them to scan for nearby networks; they do not need to actually select the malicious network.

ptrace(PT_SC_REMOTE) failed to properly validate parameters for the syscall(2) and __syscall(2) meta-system calls. As a result, a user with the ability to debug a process may trigger arbitrary code execution in the kernel, even if the target process has no special privileges. The missing validation allows an unprivileged local user to escalate privileges, potentially gaining full control of the affected system.

A file descriptor can be closed while a thread is blocked in a poll(2) or select(2) call waiting for that descriptor. Because the blocked thread does not hold a reference to the underlying object, this closure may result in the object being freed while the thread remains blocked. In this situation, the kernel must remove the blocked thread from the per-object wait queue prior to freeing the object. In the case of some file descriptor types, the kernel failed to unlink blocked threads from the object before freeing it. When the blocked thread is subsequently woken, it accesses memory that has already been freed resulting in a use-after-free vulnerability. The use-after-free vulnerability may be triggered by an unprivileged local user and can be exploited to obtain superuser privileges.

Insufficient Validation of Autoprimary SOA Queries

libcasper(3) communicates with helper processes via UNIX domain sockets, and uses the select(2) system call to wait for data to become available. However, it does not verify that its socket descriptor fits within select(2)'s descriptor set size limit of FD_SETSIZE (1024). An attacker able to cause an application using libcasper(3) to allocate large file descriptors, e.g., by opening many descriptors and executing a program which is not careful to close them upon startup, may trigger stack corruption. If the target application runs with setuid root privileges, this could be used to escalate local privileges.

MediaArea MediaInfoLib LXF element parsing heap-based buffer overflow vulnerability

Improper input validation, Unrestricted upload of file with dangerous type vulnerability in Gmission Web Fax allows Remote Code Inclusion. This issue affects Web Fax: from 3.0 before 3.1.

Mattermost versions 11.6.x <= 11.6.0, 11.5.x <= 11.5.3, 11.4.x <= 11.4.4, 10.11.x <= 10.11.14 fail to check integration URL for path traversal which allows an malicious authenticated user to call an arbitrary API via system admin Mattermost auth token using via path traversal in integration action URL.. Mattermost Advisory ID: MMSA-2026-00640

The setcred(2) system call is only available to privileged users. However, before the privilege level of the caller is checked, the user-supplied list of supplementary groups is copied into a fixed-size kernel stack buffer without first validating its length. If the supplied list exceeds the capacity of that buffer, a stack buffer overflow occurs. Because the bounds check on the supplementary groups list occurs after the kernel stack buffer has already been written, an unprivileged local user may trigger the overflow without holding any special privilege. Successful exploitation may allow an attacker to execute arbitrary code in the context of the kernel, allowing an unprivileged local user to gain elevated privileges on the affected system.

Incomplete sanitization of extended attribute (EA) path components in Netatalk 2.1.0 through 4.4.2 allows a remote authenticated attacker to write to files outside the intended metadata namespace via crafted EA names.

Multiple heap out-of-bounds reads in the Spotlight RPC unmarshalling code in Netatalk 3.1.0 through 4.4.2 allow a remote authenticated attacker to obtain sensitive information or cause a minor service disruption.

An out-of-bounds read in ASP session ID handling in Netatalk 1.3 through 4.4.2 allows an adjacent network attacker to obtain limited information or cause a denial of service via a crafted ASP request.

A missing output length bounds check in pull_charset_flags() in Netatalk 2.0.4 through 4.4.2 allows a remote authenticated attacker to execute arbitrary code or cause a denial of service via crafted character set data.

An integer underflow in dsi_writeinit() in Netatalk 1.5.0 through 4.4.2 allows a remote unauthenticated attacker to cause a denial of service via a crafted DSI write request.

An authentication bypass vulnerability in Netatalk 2.2.2 through 4.4.2 allows a remote privileged user to authenticate as an arbitrary user via the admin auth user mechanism.