CVE Database

In the Linux kernel, the following vulnerability has been resolved: xfs: close crash window in attr dabtree inactivation When inactivating an inode with node-format extended attributes, xfs_attr3_node_inactive() invalidates all child leaf/node blocks via xfs_trans_binval(), but intentionally does not remove the corresponding entries from their parent node blocks. The implicit assumption is that xfs_attr_inactive() will truncate the entire attr fork to zero extents afterwards, so log recovery will never reach the root node and follow those stale pointers. However, if a log shutdown occurs after the leaf/node block cancellations commit but before the attr bmap truncation commits, this assumption breaks. Recovery replays the attr bmap intact (the inode still has attr fork extents), but suppresses replay of all cancelled leaf/node blocks, maybe leaving them as stale data on disk. On the next mount, xlog_recover_process_iunlinks() retries inactivation and attempts to read the root node via the attr bmap. If the root node was not replayed, reading the unreplayed root block triggers a metadata verification failure immediately; if it was replayed, following its child pointers to unreplayed child blocks triggers the same failure: XFS (pmem0): Metadata corruption detected at xfs_da3_node_read_verify+0x53/0x220, xfs_da3_node block 0x78 XFS (pmem0): Unmount and run xfs_repair XFS (pmem0): First 128 bytes of corrupted metadata buffer: 00000000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00000010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00000020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00000030: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00000040: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00000050: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00000060: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00000070: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ XFS (pmem0): metadata I/O error in "xfs_da_read_buf+0x104/0x190" at daddr 0x78 len 8 error 117 Fix this in two places: In xfs_attr3_node_inactive(), after calling xfs_trans_binval() on a child block, immediately remove the entry that references it from the parent node in the same transaction. This eliminates the window where the parent holds a pointer to a cancelled block. Once all children are removed, the now-empty root node is converted to a leaf block within the same transaction. This node-to-leaf conversion is necessary for crash safety. If the system shutdown after the empty node is written to the log but before the second-phase bmap truncation commits, log recovery will attempt to verify the root block on disk. xfs_da3_node_verify() does not permit a node block with count == 0; such a block will fail verification and trigger a metadata corruption shutdown. on the other hand, leaf blocks are allowed to have this transient state. In xfs_attr_inactive(), split the attr fork truncation into two explicit phases. First, truncate all extents beyond the root block (the child extents whose parent references have already been removed above). Second, invalidate the root block and truncate the attr bmap to zero in a single transaction. The two operations in the second phase must be atomic: as long as the attr bmap has any non-zero length, recovery can follow it to the root block, so the root block invalidation must commit together with the bmap-to-zero truncation.

In the Linux kernel, the following vulnerability has been resolved: btrfs: reject root items with drop_progress and zero drop_level [BUG] When recovering relocation at mount time, merge_reloc_root() and btrfs_drop_snapshot() both use BUG_ON(level == 0) to guard against an impossible state: a non-zero drop_progress combined with a zero drop_level in a root_item, which can be triggered: ------------[ cut here ]------------ kernel BUG at fs/btrfs/relocation.c:1545! Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI CPU: 1 UID: 0 PID: 283 ... Tainted: 6.18.0+ #16 PREEMPT(voluntary) Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE Hardware name: QEMU Ubuntu 24.04 PC v2, BIOS 1.16.3-debian-1.16.3-2 RIP: 0010:merge_reloc_root+0x1266/0x1650 fs/btrfs/relocation.c:1545 Code: ffff0000 00004589 d7e9acfa ffffe8a1 79bafebe 02000000 Call Trace: merge_reloc_roots+0x295/0x890 fs/btrfs/relocation.c:1861 btrfs_recover_relocation+0xd6e/0x11d0 fs/btrfs/relocation.c:4195 btrfs_start_pre_rw_mount+0xa4d/0x1810 fs/btrfs/disk-io.c:3130 open_ctree+0x5824/0x5fe0 fs/btrfs/disk-io.c:3640 btrfs_fill_super fs/btrfs/super.c:987 [inline] btrfs_get_tree_super fs/btrfs/super.c:1951 [inline] btrfs_get_tree_subvol fs/btrfs/super.c:2094 [inline] btrfs_get_tree+0x111c/0x2190 fs/btrfs/super.c:2128 vfs_get_tree+0x9a/0x370 fs/super.c:1758 fc_mount fs/namespace.c:1199 [inline] do_new_mount_fc fs/namespace.c:3642 [inline] do_new_mount fs/namespace.c:3718 [inline] path_mount+0x5b8/0x1ea0 fs/namespace.c:4028 do_mount fs/namespace.c:4041 [inline] __do_sys_mount fs/namespace.c:4229 [inline] __se_sys_mount fs/namespace.c:4206 [inline] __x64_sys_mount+0x282/0x320 fs/namespace.c:4206 ... RIP: 0033:0x7f969c9a8fde Code: 0f1f4000 48c7c2b0 fffffff7 d8648902 b8ffffff ffc3660f ---[ end trace 0000000000000000 ]--- The bug is reproducible on 7.0.0-rc2-next-20260310 with our dynamic metadata fuzzing tool that corrupts btrfs metadata at runtime. [CAUSE] A non-zero drop_progress.objectid means an interrupted btrfs_drop_snapshot() left a resume point on disk, and in that case drop_level must be greater than 0 because the checkpoint is only saved at internal node levels. Although this invariant is enforced when the kernel writes the root item, it is not validated when the root item is read back from disk. That allows on-disk corruption to provide an invalid state with drop_progress.objectid != 0 and drop_level == 0. When relocation recovery later processes such a root item, merge_reloc_root() reads drop_level and hits BUG_ON(level == 0). The same invalid metadata can also trigger the corresponding BUG_ON() in btrfs_drop_snapshot(). [FIX] Fix this by validating the root_item invariant in tree-checker when reading root items from disk: if drop_progress.objectid is non-zero, drop_level must also be non-zero. Reject such malformed metadata with -EUCLEAN before it reaches merge_reloc_root() or btrfs_drop_snapshot() and triggers the BUG_ON. After the fix, the same corruption is correctly rejected by tree-checker and the BUG_ON is no longer triggered.

In the Linux kernel, the following vulnerability has been resolved: mshv: Fix error handling in mshv_region_pin The current error handling has two issues: First, pin_user_pages_fast() can return a short pin count (less than requested but greater than zero) when it cannot pin all requested pages. This is treated as success, leading to partially pinned regions being used, which causes memory corruption. Second, when an error occurs mid-loop, already pinned pages from the current batch are not properly accounted for before calling mshv_region_invalidate_pages(), causing a page reference leak. Treat short pins as errors and fix partial batch accounting before cleanup.

In the Linux kernel, the following vulnerability has been resolved: crypto: af-alg - fix NULL pointer dereference in scatterwalk The AF_ALG interface fails to unmark the end of a Scatter/Gather List (SGL) when chaining a new af_alg_tsgl structure. If a sendmsg() fills an SGL exactly to MAX_SGL_ENTS, the last entry is marked as the end. A subsequent sendmsg() allocates a new SGL and chains it, but fails to clear the end marker on the previous SGL's last data entry. This causes the crypto scatterwalk to hit a premature end, returning NULL on sg_next() and leading to a kernel panic during dereference. Fix this by explicitly unmarking the end of the previous SGL when performing sg_chain() in af_alg_alloc_tsgl().

In the Linux kernel, the following vulnerability has been resolved: net: qrtr: replace qrtr_tx_flow radix_tree with xarray to fix memory leak __radix_tree_create() allocates and links intermediate nodes into the tree one by one. If a subsequent allocation fails, the already-linked nodes remain in the tree with no corresponding leaf entry. These orphaned internal nodes are never reclaimed because radix_tree_for_each_slot() only visits slots containing leaf values. The radix_tree API is deprecated in favor of xarray. As suggested by Matthew Wilcox, migrate qrtr_tx_flow from radix_tree to xarray instead of fixing the radix_tree itself [1]. xarray properly handles cleanup of internal nodes — xa_destroy() frees all internal xarray nodes when the qrtr_node is released, preventing the leak. [1] https://lore.kernel.org/all/20260225071623.41275-1-jiayuan.chen@linux.dev/T/

In the Linux kernel, the following vulnerability has been resolved: net: use skb_header_pointer() for TCPv4 GSO frag_off check Syzbot reported a KMSAN uninit-value warning in gso_features_check() called from netif_skb_features() [1]. gso_features_check() reads iph->frag_off to decide whether to clear mangleid_features. Accessing the IPv4 header via ip_hdr()/inner_ip_hdr() can rely on skb header offsets that are not always safe for direct dereference on packets injected from PF_PACKET paths. Use skb_header_pointer() for the TCPv4 frag_off check so the header read is robust whether data is already linear or needs copying. [1] https://syzkaller.appspot.com/bug?extid=1543a7d954d9c6d00407

In the Linux kernel, the following vulnerability has been resolved: net: sched: cls_api: fix tc_chain_fill_node to initialize tcm_info to zero to prevent an info-leak When building netlink messages, tc_chain_fill_node() never initializes the tcm_info field of struct tcmsg. Since the allocation is not zeroed, kernel heap memory is leaked to userspace through this 4-byte field. The fix simply zeroes tcm_info alongside the other fields that are already initialized.

In the Linux kernel, the following vulnerability has been resolved: bnxt_en: set backing store type from query type bnxt_hwrm_func_backing_store_qcaps_v2() stores resp->type from the firmware response in ctxm->type and later uses that value to index fixed backing-store metadata arrays such as ctx_arr[] and bnxt_bstore_to_trace[]. ctxm->type is fixed by the current backing-store query type and matches the array index of ctx->ctx_arr. Set ctxm->type from the current loop variable instead of depending on resp->type. Also update the loop to advance type from next_valid_type in the for statement, which keeps the control flow simpler for non-valid and unchanged entries.

In the Linux kernel, the following vulnerability has been resolved: NFC: pn533: bound the UART receive buffer pn532_receive_buf() appends every incoming byte to dev->recv_skb and only resets the buffer after pn532_uart_rx_is_frame() recognizes a complete frame. A continuous stream of bytes without a valid PN532 frame header therefore keeps growing the skb until skb_put_u8() hits the tail limit. Drop the accumulated partial frame once the fixed receive buffer is full so malformed UART traffic cannot grow the skb past PN532_UART_SKB_BUFF_LEN.

In the Linux kernel, the following vulnerability has been resolved: netfilter: ctnetlink: zero expect NAT fields when CTA_EXPECT_NAT absent ctnetlink_alloc_expect() allocates expectations from a non-zeroing slab cache via nf_ct_expect_alloc(). When CTA_EXPECT_NAT is not present in the netlink message, saved_addr and saved_proto are never initialized. Stale data from a previous slab occupant can then be dumped to userspace by ctnetlink_exp_dump_expect(), which checks these fields to decide whether to emit CTA_EXPECT_NAT. The safe sibling nf_ct_expect_init(), used by the packet path, explicitly zeroes these fields. Zero saved_addr, saved_proto and dir in the else branch, guarded by IS_ENABLED(CONFIG_NF_NAT) since these fields only exist when NAT is enabled. Confirmed by priming the expect slab with NAT-bearing expectations, freeing them, creating a new expectation without CTA_EXPECT_NAT, and observing that the ctnetlink dump emits a spurious CTA_EXPECT_NAT containing stale data from the prior allocation.

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: reject immediate NF_QUEUE verdict nft_queue is always used from userspace nftables to deliver the NF_QUEUE verdict. Immediately emitting an NF_QUEUE verdict is never used by the userspace nft tools, so reject immediate NF_QUEUE verdicts. The arp family does not provide queue support, but such an immediate verdict is still reachable. Globally reject NF_QUEUE immediate verdicts to address this issue.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sync: hci_cmd_sync_queue_once() return -EEXIST if exists hci_cmd_sync_queue_once() needs to indicate whether a queue item was added, so caller can know if callbacks are called, so it can avoid leaking resources. Change the function to return -EEXIST if queue item already exists. Modify all callsites to handle that.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sync: fix leaks when hci_cmd_sync_queue_once fails When hci_cmd_sync_queue_once() returns with error, the destroy callback will not be called. Fix leaking references / memory on these failures.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: MGMT: validate mesh send advertising payload length mesh_send() currently bounds MGMT_OP_MESH_SEND by total command length, but it never verifies that the bytes supplied for the flexible adv_data[] array actually match the embedded adv_data_len field. MGMT_MESH_SEND_SIZE only covers the fixed header, so a truncated command can still pass the existing 20..50 byte range check and later drive the async mesh send path past the end of the queued command buffer. Keep rejecting zero-length and oversized advertising payloads, but validate adv_data_len explicitly and require the command length to exactly match the flexible array size before queueing the request.

In the Linux kernel, the following vulnerability has been resolved: net: macb: properly unregister fixed rate clocks The additional resources allocated with clk_register_fixed_rate() need to be released with clk_unregister_fixed_rate(), otherwise they are lost.

In the Linux kernel, the following vulnerability has been resolved: net/mlx5: lag: Check for LAG device before creating debugfs __mlx5_lag_dev_add_mdev() may return 0 (success) even when an error occurs that is handled gracefully. Consequently, the initialization flow proceeds to call mlx5_ldev_add_debugfs() even when there is no valid LAG context. mlx5_ldev_add_debugfs() blindly created the debugfs directory and attributes. This exposed interfaces (like the members file) that rely on a valid ldev pointer, leading to potential NULL pointer dereferences if accessed when ldev is NULL. Add a check to verify that mlx5_lag_dev(dev) returns a valid pointer before attempting to create the debugfs entries.

In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Fix switchdev mode rollback in case of failure If for some internal reason switchdev mode fails, we rollback to legacy mode, before this patch, rollback will unregister the uplink netdev and leave it unregistered causing the below kernel bug. To fix this, we need to avoid netdev unregister by setting the proper rollback flag 'MLX5_PRIV_FLAGS_SWITCH_LEGACY' to indicate legacy mode. devlink (431) used greatest stack depth: 11048 bytes left mlx5_core 0000:00:03.0: E-Switch: Disable: mode(LEGACY), nvfs(0), \ necvfs(0), active vports(0) mlx5_core 0000:00:03.0: E-Switch: Supported tc chains and prios offload mlx5_core 0000:00:03.0: Loading uplink representor for vport 65535 mlx5_core 0000:00:03.0: mlx5_cmd_out_err:816:(pid 456): \ QUERY_HCA_CAP(0x100) op_mod(0x0) failed, \ status bad parameter(0x3), syndrome (0x3a3846), err(-22) mlx5_core 0000:00:03.0 enp0s3np0 (unregistered): Unloading uplink \ representor for vport 65535 ------------[ cut here ]------------ kernel BUG at net/core/dev.c:12070! Oops: invalid opcode: 0000 [#1] SMP NOPTI CPU: 2 UID: 0 PID: 456 Comm: devlink Not tainted 6.16.0-rc3+ \ #9 PREEMPT(voluntary) RIP: 0010:unregister_netdevice_many_notify+0x123/0xae0 ... Call Trace: [ 90.923094] unregister_netdevice_queue+0xad/0xf0 [ 90.923323] unregister_netdev+0x1c/0x40 [ 90.923522] mlx5e_vport_rep_unload+0x61/0xc6 [ 90.923736] esw_offloads_enable+0x8e6/0x920 [ 90.923947] mlx5_eswitch_enable_locked+0x349/0x430 [ 90.924182] ? is_mp_supported+0x57/0xb0 [ 90.924376] mlx5_devlink_eswitch_mode_set+0x167/0x350 [ 90.924628] devlink_nl_eswitch_set_doit+0x6f/0xf0 [ 90.924862] genl_family_rcv_msg_doit+0xe8/0x140 [ 90.925088] genl_rcv_msg+0x18b/0x290 [ 90.925269] ? __pfx_devlink_nl_pre_doit+0x10/0x10 [ 90.925506] ? __pfx_devlink_nl_eswitch_set_doit+0x10/0x10 [ 90.925766] ? __pfx_devlink_nl_post_doit+0x10/0x10 [ 90.926001] ? __pfx_genl_rcv_msg+0x10/0x10 [ 90.926206] netlink_rcv_skb+0x52/0x100 [ 90.926393] genl_rcv+0x28/0x40 [ 90.926557] netlink_unicast+0x27d/0x3d0 [ 90.926749] netlink_sendmsg+0x1f7/0x430 [ 90.926942] __sys_sendto+0x213/0x220 [ 90.927127] ? __sys_recvmsg+0x6a/0xd0 [ 90.927312] __x64_sys_sendto+0x24/0x30 [ 90.927504] do_syscall_64+0x50/0x1c0 [ 90.927687] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 90.927929] RIP: 0033:0x7f7d0363e047

In the Linux kernel, the following vulnerability has been resolved: bpf: Reject sleepable kprobe_multi programs at attach time kprobe.multi programs run in atomic/RCU context and cannot sleep. However, bpf_kprobe_multi_link_attach() did not validate whether the program being attached had the sleepable flag set, allowing sleepable helpers such as bpf_copy_from_user() to be invoked from a non-sleepable context. This causes a "sleeping function called from invalid context" splat: BUG: sleeping function called from invalid context at ./include/linux/uaccess.h:169 in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 1787, name: sudo preempt_count: 1, expected: 0 RCU nest depth: 2, expected: 0 Fix this by rejecting sleepable programs early in bpf_kprobe_multi_link_attach(), before any further processing.

In the Linux kernel, the following vulnerability has been resolved: gpio: qixis-fpga: Fix error handling for devm_regmap_init_mmio() devm_regmap_init_mmio() returns an ERR_PTR() on failure, not NULL. The original code checked for NULL which would never trigger on error, potentially leading to an invalid pointer dereference. Use IS_ERR() and PTR_ERR() to properly handle the error case.

In the Linux kernel, the following vulnerability has been resolved: spi: stm32-ospi: Fix resource leak in remove() callback The remove() callback returned early if pm_runtime_resume_and_get() failed, skipping the cleanup of spi controller and other resources. Remove the early return so cleanup completes regardless of PM resume result.

An out-of-bounds read vulnerability in VrmlData_IndexedLineSet::TShape in the VRML parser in Open CASCADE Technology (OCCT) V8_0_0_rc5 allows attackers to cause a denial of service via a crafted VRML file. The issue occurs because coordIndex values from parsed input are used as direct array indices without validation against the size of the coordinate array during geometry processing.

In the Linux kernel, the following vulnerability has been resolved: drm/xe/xe_pagefault: Disallow writes to read-only VMAs The page fault handler should reject write/atomic access to read only VMAs. Add code to handle this in xe_pagefault_service after the VMA lookup. v2: - Apply max line length (Matthew) (cherry picked from commit 714ee6754ac5fa3dc078856a196a6b124cd797a0)

In the Linux kernel, the following vulnerability has been resolved: drm/xe/pxp: Clear restart flag in pxp_start after jumping back If we don't clear the flag we'll keep jumping back at the beginning of the function once we reach the end. (cherry picked from commit 0850ec7bb2459602351639dccf7a68a03c9d1ee0)

In the Linux kernel, the following vulnerability has been resolved: spi: amlogic: spifc-a4: unregister ECC engine on probe failure and remove() callback aml_sfc_probe() registers the on-host NAND ECC engine, but teardown was missing from both probe unwind and remove-time cleanup. Add a devm cleanup action after successful registration so nand_ecc_unregister_on_host_hw_engine() runs automatically on probe failures and during device removal.

In the Linux kernel, the following vulnerability has been resolved: drm/ioc32: stop speculation on the drm_compat_ioctl path The drm compat ioctl path takes a user controlled pointer, and then dereferences it into a table of function pointers, the signature method of spectre problems. Fix this up by calling array_index_nospec() on the index to the function pointer list.

In the Linux kernel, the following vulnerability has been resolved: ALSA: ctxfi: Check the error for index mapping The ctxfi driver blindly assumed a proper value returned from daio_device_index(), but it's not always true. Add a proper error check to deal with the error from the function.

In the Linux kernel, the following vulnerability has been resolved: ALSA: ctxfi: Don't enumerate SPDIF1 at DAIO initialization The recent refactoring of xfi driver changed the assignment of atc->daios[] at atc_get_resources(); now it loops over all enum DAIOTYP entries while it looped formerly only a part of them. The problem is that the last entry, SPDIF1, is a special type that is used only for hw20k1 CTSB073X model (as a replacement of SPDIFIO), and there is no corresponding definition for hw20k2. Due to the lack of the info, it caused a kernel crash on hw20k2, which was already worked around by the commit b045ab3dff97 ("ALSA: ctxfi: Fix missing SPDIFI1 index handling"). This patch addresses the root cause of the regression above properly, simply by skipping the incorrect SPDIF1 type in the parser loop. For making the change clearer, the code is slightly arranged, too.

In the Linux kernel, the following vulnerability has been resolved: hwmon: (occ) Fix division by zero in occ_show_power_1() In occ_show_power_1() case 1, the accumulator is divided by update_tag without checking for zero. If no samples have been collected yet (e.g. during early boot when the sensor block is included but hasn't been updated), update_tag is zero, causing a kernel divide-by-zero crash. The 2019 fix in commit 211186cae14d ("hwmon: (occ) Fix division by zero issue") only addressed occ_get_powr_avg() used by occ_show_power_2() and occ_show_power_a0(). This separate code path in occ_show_power_1() was missed. Fix this by reusing the existing occ_get_powr_avg() helper, which already handles the zero-sample case and uses mul_u64_u32_div() to multiply before dividing for better precision. Move the helper above occ_show_power_1() so it is visible at the call site. [groeck: Fix alignment problems reported by checkpatch]

In the Linux kernel, the following vulnerability has been resolved: drm/i915/dsi: Don't do DSC horizontal timing adjustments in command mode Stop adjusting the horizontal timing values based on the compression ratio in command mode. Bspec seems to be telling us to do this only in video mode, and this is also how the Windows driver does things. This should also fix a div-by-zero on some machines because the adjusted htotal ends up being so small that we end up with line_time_us==0 when trying to determine the vtotal value in command mode. Note that this doesn't actually make the display on the Huawei Matebook E work, but at least the kernel no longer explodes when the driver loads. (cherry picked from commit 0b475e91ecc2313207196c6d7fd5c53e1a878525)

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Change AMDGPU_VA_RESERVED_TRAP_SIZE to 64KB Currently, AMDGPU_VA_RESERVED_TRAP_SIZE is hardcoded to 8KB, while KFD_CWSR_TBA_TMA_SIZE is defined as 2 * PAGE_SIZE. On systems with 4K pages, both values match (8KB), so allocation and reserved space are consistent. However, on 64K page-size systems, KFD_CWSR_TBA_TMA_SIZE becomes 128KB, while the reserved trap area remains 8KB. This mismatch causes the kernel to crash when running rocminfo or rccl unit tests. Kernel attempted to read user page (2) - exploit attempt? (uid: 1001) BUG: Kernel NULL pointer dereference on read at 0x00000002 Faulting instruction address: 0xc0000000002c8a64 Oops: Kernel access of bad area, sig: 11 [#1] LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA pSeries CPU: 34 UID: 1001 PID: 9379 Comm: rocminfo Tainted: G E 6.19.0-rc4-amdgpu-00320-gf23176405700 #56 VOLUNTARY Tainted: [E]=UNSIGNED_MODULE Hardware name: IBM,9105-42A POWER10 (architected) 0x800200 0xf000006 of:IBM,FW1060.30 (ML1060_896) hv:phyp pSeries NIP: c0000000002c8a64 LR: c00000000125dbc8 CTR: c00000000125e730 REGS: c0000001e0957580 TRAP: 0300 Tainted: G E MSR: 8000000000009033 <SF,EE,ME,IR,DR,RI,LE> CR: 24008268 XER: 00000036 CFAR: c00000000125dbc4 DAR: 0000000000000002 DSISR: 40000000 IRQMASK: 1 GPR00: c00000000125d908 c0000001e0957820 c0000000016e8100 c00000013d814540 GPR04: 0000000000000002 c00000013d814550 0000000000000045 0000000000000000 GPR08: c00000013444d000 c00000013d814538 c00000013d814538 0000000084002268 GPR12: c00000000125e730 c000007e2ffd5f00 ffffffffffffffff 0000000000020000 GPR16: 0000000000000000 0000000000000002 c00000015f653000 0000000000000000 GPR20: c000000138662400 c00000013d814540 0000000000000000 c00000013d814500 GPR24: 0000000000000000 0000000000000002 c0000001e0957888 c0000001e0957878 GPR28: c00000013d814548 0000000000000000 c00000013d814540 c0000001e0957888 NIP [c0000000002c8a64] __mutex_add_waiter+0x24/0xc0 LR [c00000000125dbc8] __mutex_lock.constprop.0+0x318/0xd00 Call Trace: 0xc0000001e0957890 (unreliable) __mutex_lock.constprop.0+0x58/0xd00 amdgpu_amdkfd_gpuvm_alloc_memory_of_gpu+0x6fc/0xb60 [amdgpu] kfd_process_alloc_gpuvm+0x54/0x1f0 [amdgpu] kfd_process_device_init_cwsr_dgpu+0xa4/0x1a0 [amdgpu] kfd_process_device_init_vm+0xd8/0x2e0 [amdgpu] kfd_ioctl_acquire_vm+0xd0/0x130 [amdgpu] kfd_ioctl+0x514/0x670 [amdgpu] sys_ioctl+0x134/0x180 system_call_exception+0x114/0x300 system_call_vectored_common+0x15c/0x2ec This patch changes AMDGPU_VA_RESERVED_TRAP_SIZE to 64 KB and KFD_CWSR_TBA_TMA_SIZE to the AMD GPU page size. This means we reserve 64 KB for the trap in the address space, but only allocate 8 KB within it. With this approach, the allocation size never exceeds the reserved area. (cherry picked from commit 31b8de5e55666f26ea7ece5f412b83eab3f56dbb)