CVE Database

In the Linux kernel, the following vulnerability has been resolved: drm/atmel-hlcdc: fix memory leak from the atomic_destroy_state callback After several commits, the slab memory increases. Some drm_crtc_commit objects are not freed. The atomic_destroy_state callback only put the framebuffer. Use the __drm_atomic_helper_plane_destroy_state() function to put all the objects that are no longer needed. It has been seen after hours of usage of a graphics application or using kmemleak: unreferenced object 0xc63a6580 (size 64): comm "egt_basic", pid 171, jiffies 4294940784 hex dump (first 32 bytes): 40 50 34 c5 01 00 00 00 ff ff ff ff 8c 65 3a c6 @P4..........e:. 8c 65 3a c6 ff ff ff ff 98 65 3a c6 98 65 3a c6 .e:......e:..e:. backtrace (crc c25aa925): kmemleak_alloc+0x34/0x3c __kmalloc_cache_noprof+0x150/0x1a4 drm_atomic_helper_setup_commit+0x1e8/0x7bc drm_atomic_helper_commit+0x3c/0x15c drm_atomic_commit+0xc0/0xf4 drm_atomic_helper_set_config+0x84/0xb8 drm_mode_setcrtc+0x32c/0x810 drm_ioctl+0x20c/0x488 sys_ioctl+0x14c/0xc20 ret_fast_syscall+0x0/0x54

In the Linux kernel, the following vulnerability has been resolved: hfsplus: pretend special inodes as regular files Since commit af153bb63a33 ("vfs: catch invalid modes in may_open()") requires any inode be one of S_IFDIR/S_IFLNK/S_IFREG/S_IFCHR/S_IFBLK/ S_IFIFO/S_IFSOCK type, use S_IFREG for special inodes.

In the Linux kernel, the following vulnerability has been resolved: wifi: rtw89: fix potential zero beacon interval in beacon tracking During fuzz testing, it was discovered that bss_conf->beacon_int might be zero, which could result in a division by zero error in subsequent calculations. Set a default value of 100 TU if the interval is zero to ensure stability.

In the Linux kernel, the following vulnerability has been resolved: EFI/CPER: don't go past the ARM processor CPER record buffer There's a logic inside GHES/CPER to detect if the section_length is too small, but it doesn't detect if it is too big. Currently, if the firmware receives an ARM processor CPER record stating that a section length is big, kernel will blindly trust section_length, producing a very long dump. For instance, a 67 bytes record with ERR_INFO_NUM set 46198 and section length set to 854918320 would dump a lot of data going a way past the firmware memory-mapped area. Fix it by adding a logic to prevent it to go past the buffer if ERR_INFO_NUM is too big, making it report instead: [Hardware Error]: Hardware error from APEI Generic Hardware Error Source: 1 [Hardware Error]: event severity: recoverable [Hardware Error]: Error 0, type: recoverable [Hardware Error]: section_type: ARM processor error [Hardware Error]: MIDR: 0xff304b2f8476870a [Hardware Error]: section length: 854918320, CPER size: 67 [Hardware Error]: section length is too big [Hardware Error]: firmware-generated error record is incorrect [Hardware Error]: ERR_INFO_NUM is 46198 [ rjw: Subject and changelog tweaks ]

In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Ignore -EBUSY when checking nested events from vcpu_block() Ignore -EBUSY when checking nested events after exiting a blocking state while L2 is active, as exiting to userspace will generate a spurious userspace exit, usually with KVM_EXIT_UNKNOWN, and likely lead to the VM's demise. Continuing with the wakeup isn't perfect either, as *something* has gone sideways if a vCPU is awakened in L2 with an injected event (or worse, a nested run pending), but continuing on gives the VM a decent chance of surviving without any major side effects. As explained in the Fixes commits, it _should_ be impossible for a vCPU to be put into a blocking state with an already-injected event (exception, IRQ, or NMI). Unfortunately, userspace can stuff MP_STATE and/or injected events, and thus put the vCPU into what should be an impossible state. Don't bother trying to preserve the WARN, e.g. with an anti-syzkaller Kconfig, as WARNs can (hopefully) be added in paths where _KVM_ would be violating x86 architecture, e.g. by WARNing if KVM attempts to inject an exception or interrupt while the vCPU isn't running.

In the Linux kernel, the following vulnerability has been resolved: fbdev: of: display_timing: fix refcount leak in of_get_display_timings() of_parse_phandle() returns a device_node with refcount incremented, which is stored in 'entry' and then copied to 'native_mode'. When the error paths at lines 184 or 192 jump to 'entryfail', native_mode's refcount is not decremented, causing a refcount leak. Fix this by changing the goto target from 'entryfail' to 'timingfail', which properly calls of_node_put(native_mode) before cleanup.

In the Linux kernel, the following vulnerability has been resolved: gfs2: fiemap page fault fix In gfs2_fiemap(), we are calling iomap_fiemap() while holding the inode glock. This can lead to recursive glock taking if the fiemap buffer is memory mapped to the same inode and accessing it triggers a page fault. Fix by disabling page faults for iomap_fiemap() and faulting in the buffer by hand if necessary. Fixes xfstest generic/742.

In the Linux kernel, the following vulnerability has been resolved: arm64: Add support for TSV110 Spectre-BHB mitigation The TSV110 processor is vulnerable to the Spectre-BHB (Branch History Buffer) attack, which can be exploited to leak information through branch prediction side channels. This commit adds the MIDR of TSV110 to the list for software mitigation.

In the Linux kernel, the following vulnerability has been resolved: phy: fsl-imx8mq-usb: set platform driver data Add missing platform_set_drvdata() as the data will be used in remove().

In the Linux kernel, the following vulnerability has been resolved: media: cx88: Add missing unmap in snd_cx88_hw_params() In error path, add cx88_alsa_dma_unmap() to release resource acquired by cx88_alsa_dma_map().

In the Linux kernel, the following vulnerability has been resolved: wifi: libertas: fix WARNING in usb_tx_block The function usb_tx_block() submits cardp->tx_urb without ensuring that any previous transmission on this URB has completed. If a second call occurs while the URB is still active (e.g. during rapid firmware loading), usb_submit_urb() detects the active state and triggers a warning: 'URB submitted while active'. Fix this by enforcing serialization: call usb_kill_urb() before submitting the new request. This ensures the URB is idle and safe to reuse.

In the Linux kernel, the following vulnerability has been resolved: mptcp: pm: in-kernel: always set ID as avail when rm endp Syzkaller managed to find a combination of actions that was generating this warning: WARNING: net/mptcp/pm_kernel.c:1074 at __mark_subflow_endp_available net/mptcp/pm_kernel.c:1074 [inline], CPU#1: syz.7.48/2535 WARNING: net/mptcp/pm_kernel.c:1074 at mptcp_pm_nl_fullmesh net/mptcp/pm_kernel.c:1446 [inline], CPU#1: syz.7.48/2535 WARNING: net/mptcp/pm_kernel.c:1074 at mptcp_pm_nl_set_flags_all net/mptcp/pm_kernel.c:1474 [inline], CPU#1: syz.7.48/2535 WARNING: net/mptcp/pm_kernel.c:1074 at mptcp_pm_nl_set_flags+0x5de/0x640 net/mptcp/pm_kernel.c:1538, CPU#1: syz.7.48/2535 Modules linked in: CPU: 1 UID: 0 PID: 2535 Comm: syz.7.48 Not tainted 6.18.0-03987-gea5f5e676cf5 #17 PREEMPT(voluntary) Hardware name: QEMU Ubuntu 25.10 PC (i440FX + PIIX, 1996), BIOS 1.17.0-debian-1.17.0-1 04/01/2014 RIP: 0010:__mark_subflow_endp_available net/mptcp/pm_kernel.c:1074 [inline] RIP: 0010:mptcp_pm_nl_fullmesh net/mptcp/pm_kernel.c:1446 [inline] RIP: 0010:mptcp_pm_nl_set_flags_all net/mptcp/pm_kernel.c:1474 [inline] RIP: 0010:mptcp_pm_nl_set_flags+0x5de/0x640 net/mptcp/pm_kernel.c:1538 Code: 89 c7 e8 c5 8c 73 fe e9 f7 fd ff ff 49 83 ef 80 e8 b7 8c 73 fe 4c 89 ff be 03 00 00 00 e8 4a 29 e3 fe eb ac e8 a3 8c 73 fe 90 <0f> 0b 90 e9 3d ff ff ff e8 95 8c 73 fe b8 a1 ff ff ff eb 1a e8 89 RSP: 0018:ffffc9001535b820 EFLAGS: 00010287 netdevsim0: tun_chr_ioctl cmd 1074025677 RAX: ffffffff82da294d RBX: 0000000000000001 RCX: 0000000000080000 RDX: ffffc900096d0000 RSI: 00000000000006d6 RDI: 00000000000006d7 netdevsim0: linktype set to 823 RBP: ffff88802cdb2240 R08: 00000000000104ae R09: ffffffffffffffff R10: ffffffff82da27d4 R11: 0000000000000000 R12: 0000000000000000 R13: ffff88801246d8c0 R14: ffffc9001535b8b8 R15: ffff88802cdb1800 FS: 00007fc6ac5a76c0(0000) GS:ffff8880f90c8000(0000) knlGS:0000000000000000 netlink: 'syz.3.50': attribute type 5 has an invalid length. CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 netlink: 1232 bytes leftover after parsing attributes in process `syz.3.50'. CR2: 0000200000010000 CR3: 0000000025b1a000 CR4: 0000000000350ef0 Call Trace: <TASK> mptcp_pm_set_flags net/mptcp/pm_netlink.c:277 [inline] mptcp_pm_nl_set_flags_doit+0x1d7/0x210 net/mptcp/pm_netlink.c:282 genl_family_rcv_msg_doit+0x117/0x180 net/netlink/genetlink.c:1115 genl_family_rcv_msg net/netlink/genetlink.c:1195 [inline] genl_rcv_msg+0x3a8/0x3f0 net/netlink/genetlink.c:1210 netlink_rcv_skb+0x16d/0x240 net/netlink/af_netlink.c:2550 genl_rcv+0x28/0x40 net/netlink/genetlink.c:1219 netlink_unicast_kernel net/netlink/af_netlink.c:1318 [inline] netlink_unicast+0x3e9/0x4c0 net/netlink/af_netlink.c:1344 netlink_sendmsg+0x4ab/0x5b0 net/netlink/af_netlink.c:1894 sock_sendmsg_nosec net/socket.c:718 [inline] __sock_sendmsg+0xc9/0xf0 net/socket.c:733 ____sys_sendmsg+0x272/0x3b0 net/socket.c:2608 ___sys_sendmsg+0x2de/0x320 net/socket.c:2662 __sys_sendmsg net/socket.c:2694 [inline] __do_sys_sendmsg net/socket.c:2699 [inline] __se_sys_sendmsg net/socket.c:2697 [inline] __x64_sys_sendmsg+0x110/0x1a0 net/socket.c:2697 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xed/0x360 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7fc6adb66f6d Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 e8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fc6ac5a6ff8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007fc6addf5fa0 RCX: 00007fc6adb66f6d RDX: 0000000000048084 RSI: 00002000000002c0 RDI: 000000000000000e RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 000000000000 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: HID: prodikeys: Check presence of pm->input_ep82 Fake USB devices can send their own report descriptors for which the input_mapping() hook does not get called. In this case, pm->input_ep82 stays NULL, which leads to a crash later. This does not happen with the real device, but can be provoked by imposing as one.

In the Linux kernel, the following vulnerability has been resolved: media: chips-media: wave5: Fix SError of kernel panic when closed SError of kernel panic rarely happened while testing fluster. The root cause was to enter suspend mode because timeout of autosuspend delay happened. [ 48.834439] SError Interrupt on CPU0, code 0x00000000bf000000 -- SError [ 48.834455] CPU: 0 UID: 0 PID: 1067 Comm: v4l2h265dec0:sr Not tainted 6.12.9-gc9e21a1ebd75-dirty #7 [ 48.834461] Hardware name: ti Texas Instruments J721S2 EVM/Texas Instruments J721S2 EVM, BIOS 2025.01-00345-gbaf3aaa8ecfa 01/01/2025 [ 48.834464] pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 48.834468] pc : wave5_dec_clr_disp_flag+0x40/0x80 [wave5] [ 48.834488] lr : wave5_dec_clr_disp_flag+0x40/0x80 [wave5] [ 48.834495] sp : ffff8000856e3a30 [ 48.834497] x29: ffff8000856e3a30 x28: ffff0008093f6010 x27: ffff000809158130 [ 48.834504] x26: 0000000000000000 x25: ffff00080b625000 x24: ffff000804a9ba80 [ 48.834509] x23: ffff000802343028 x22: ffff000809158150 x21: ffff000802218000 [ 48.834513] x20: ffff0008093f6000 x19: ffff0008093f6000 x18: 0000000000000000 [ 48.834518] x17: 0000000000000000 x16: 0000000000000000 x15: 0000ffff74009618 [ 48.834523] x14: 000000010000000c x13: 0000000000000000 x12: 0000000000000000 [ 48.834527] x11: ffffffffffffffff x10: ffffffffffffffff x9 : ffff000802343028 [ 48.834532] x8 : ffff00080b6252a0 x7 : 0000000000000038 x6 : 0000000000000000 [ 48.834536] x5 : ffff00080b625060 x4 : 0000000000000000 x3 : 0000000000000000 [ 48.834541] x2 : 0000000000000000 x1 : ffff800084bf0118 x0 : ffff800084bf0000 [ 48.834547] Kernel panic - not syncing: Asynchronous SError Interrupt [ 48.834549] CPU: 0 UID: 0 PID: 1067 Comm: v4l2h265dec0:sr Not tainted 6.12.9-gc9e21a1ebd75-dirty #7 [ 48.834554] Hardware name: ti Texas Instruments J721S2 EVM/Texas Instruments J721S2 EVM, BIOS 2025.01-00345-gbaf3aaa8ecfa 01/01/2025 [ 48.834556] Call trace: [ 48.834559] dump_backtrace+0x94/0xec [ 48.834574] show_stack+0x18/0x24 [ 48.834579] dump_stack_lvl+0x38/0x90 [ 48.834585] dump_stack+0x18/0x24 [ 48.834588] panic+0x35c/0x3e0 [ 48.834592] nmi_panic+0x40/0x8c [ 48.834595] arm64_serror_panic+0x64/0x70 [ 48.834598] do_serror+0x3c/0x78 [ 48.834601] el1h_64_error_handler+0x34/0x4c [ 48.834605] el1h_64_error+0x64/0x68 [ 48.834608] wave5_dec_clr_disp_flag+0x40/0x80 [wave5] [ 48.834615] wave5_vpu_dec_clr_disp_flag+0x54/0x80 [wave5] [ 48.834622] wave5_vpu_dec_buf_queue+0x19c/0x1a0 [wave5] [ 48.834628] __enqueue_in_driver+0x3c/0x74 [videobuf2_common] [ 48.834639] vb2_core_qbuf+0x508/0x61c [videobuf2_common] [ 48.834646] vb2_qbuf+0xa4/0x168 [videobuf2_v4l2] [ 48.834656] v4l2_m2m_qbuf+0x80/0x238 [v4l2_mem2mem] [ 48.834666] v4l2_m2m_ioctl_qbuf+0x18/0x24 [v4l2_mem2mem] [ 48.834673] v4l_qbuf+0x48/0x5c [videodev] [ 48.834704] __video_do_ioctl+0x180/0x3f0 [videodev] [ 48.834725] video_usercopy+0x2ec/0x68c [videodev] [ 48.834745] video_ioctl2+0x18/0x24 [videodev] [ 48.834766] v4l2_ioctl+0x40/0x60 [videodev] [ 48.834786] __arm64_sys_ioctl+0xa8/0xec [ 48.834793] invoke_syscall+0x44/0x100 [ 48.834800] el0_svc_common.constprop.0+0xc0/0xe0 [ 48.834804] do_el0_svc+0x1c/0x28 [ 48.834809] el0_svc+0x30/0xd0 [ 48.834813] el0t_64_sync_handler+0xc0/0xc4 [ 48.834816] el0t_64_sync+0x190/0x194 [ 48.834820] SMP: stopping secondary CPUs [ 48.834831] Kernel Offset: disabled [ 48.834833] CPU features: 0x08,00002002,80200000,4200421b [ 48.834837] Memory Limit: none [ 49.161404] ---[ end Kernel panic - not syncing: Asynchronous SError Interrupt ]---

In the Linux kernel, the following vulnerability has been resolved: media: i2c/tw9906: Fix potential memory leak in tw9906_probe() In one of the error paths in tw9906_probe(), the memory allocated in v4l2_ctrl_handler_init() and v4l2_ctrl_new_std() is not freed. Fix that by calling v4l2_ctrl_handler_free() on the handler in that error path.

In the Linux kernel, the following vulnerability has been resolved: kcm: fix zero-frag skb in frag_list on partial sendmsg error Syzkaller reported a warning in kcm_write_msgs() when processing a message with a zero-fragment skb in the frag_list. When kcm_sendmsg() fills MAX_SKB_FRAGS fragments in the current skb, it allocates a new skb (tskb) and links it into the frag_list before copying data. If the copy subsequently fails (e.g. -EFAULT from user memory), tskb remains in the frag_list with zero fragments: head skb (msg being assembled, NOT yet in sk_write_queue) +-----------+ | frags[17] | (MAX_SKB_FRAGS, all filled with data) | frag_list-+--> tskb +-----------+ +----------+ | frags[0] | (empty! copy failed before filling) +----------+ For SOCK_SEQPACKET with partial data already copied, the error path saves this message via partial_message for later completion. For SOCK_SEQPACKET, sock_write_iter() automatically sets MSG_EOR, so a subsequent zero-length write(fd, NULL, 0) completes the message and queues it to sk_write_queue. kcm_write_msgs() then walks the frag_list and hits: WARN_ON(!skb_shinfo(skb)->nr_frags) TCP has a similar pattern where skbs are enqueued before data copy and cleaned up on failure via tcp_remove_empty_skb(). KCM was missing the equivalent cleanup. Fix this by tracking the predecessor skb (frag_prev) when allocating a new frag_list entry. On error, if the tail skb has zero frags, use frag_prev to unlink and free it in O(1) without walking the singly-linked frag_list. frag_prev is safe to dereference because the entire message chain is only held locally (or in kcm->seq_skb) and is not added to sk_write_queue until MSG_EOR, so the send path cannot free it underneath us. Also change the WARN_ON to WARN_ON_ONCE to avoid flooding the log if the condition is somehow hit repeatedly. There are currently no KCM selftests in the kernel tree; a simple reproducer is available at [1]. [1] https://gist.github.com/mrpre/a94d431c757e8d6f168f4dd1a3749daa

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Add signal type check for dcn401 get_phyd32clk_src Trying to access link enc on a dpia link will cause a crash otherwise

In the Linux kernel, the following vulnerability has been resolved: soc: ti: k3-socinfo: Fix regmap leak on probe failure The mmio regmap allocated during probe is never freed. Switch to using the device managed allocator so that the regmap is released on probe failures (e.g. probe deferral) and on driver unbind.

In the Linux kernel, the following vulnerability has been resolved: x86/kexec: add a sanity check on previous kernel's ima kexec buffer When the second-stage kernel is booted via kexec with a limiting command line such as "mem=<size>", the physical range that contains the carried over IMA measurement list may fall outside the truncated RAM leading to a kernel panic. BUG: unable to handle page fault for address: ffff97793ff47000 RIP: ima_restore_measurement_list+0xdc/0x45a #PF: error_code(0x0000) – not-present page Other architectures already validate the range with page_is_ram(), as done in commit cbf9c4b9617b ("of: check previous kernel's ima-kexec-buffer against memory bounds") do a similar check on x86. Without carrying the measurement list across kexec, the attestation would fail.

In the Linux kernel, the following vulnerability has been resolved: net/sched: act_skbedit: fix divide-by-zero in tcf_skbedit_hash() Commit 38a6f0865796 ("net: sched: support hash selecting tx queue") added SKBEDIT_F_TXQ_SKBHASH support. The inclusive range size is computed as: mapping_mod = queue_mapping_max - queue_mapping + 1; The range size can be 65536 when the requested range covers all possible u16 queue IDs (e.g. queue_mapping=0 and queue_mapping_max=U16_MAX). That value cannot be represented in a u16 and previously wrapped to 0, so tcf_skbedit_hash() could trigger a divide-by-zero: queue_mapping += skb_get_hash(skb) % params->mapping_mod; Compute mapping_mod in a wider type and reject ranges larger than U16_MAX to prevent params->mapping_mod from becoming 0 and avoid the crash.

In the Linux kernel, the following vulnerability has been resolved: media: iris: Add missing platform data entries for SM8750 Two platform-data fields for SM8750 were missed: - get_vpu_buffer_size = iris_vpu33_buf_size Without this, the driver fails to allocate the required internal buffers, leading to basic decode/encode failures during session bring-up. - max_core_mbps = ((7680 * 4320) / 256) * 60 Without this capability exposed, capability checks are incomplete and v4l2-compliance for encoder fails.

In the Linux kernel, the following vulnerability has been resolved: team: avoid NETDEV_CHANGEMTU event when unregistering slave syzbot is reporting unregister_netdevice: waiting for netdevsim0 to become free. Usage count = 3 ref_tracker: netdev@ffff88807dcf8618 has 1/2 users at __netdev_tracker_alloc include/linux/netdevice.h:4400 [inline] netdev_hold include/linux/netdevice.h:4429 [inline] inetdev_init+0x201/0x4e0 net/ipv4/devinet.c:286 inetdev_event+0x251/0x1610 net/ipv4/devinet.c:1600 notifier_call_chain+0x19d/0x3a0 kernel/notifier.c:85 call_netdevice_notifiers_mtu net/core/dev.c:2318 [inline] netif_set_mtu_ext+0x5aa/0x800 net/core/dev.c:9886 netif_set_mtu+0xd7/0x1b0 net/core/dev.c:9907 dev_set_mtu+0x126/0x260 net/core/dev_api.c:248 team_port_del+0xb07/0xcb0 drivers/net/team/team_core.c:1333 team_del_slave drivers/net/team/team_core.c:1936 [inline] team_device_event+0x207/0x5b0 drivers/net/team/team_core.c:2929 notifier_call_chain+0x19d/0x3a0 kernel/notifier.c:85 call_netdevice_notifiers_extack net/core/dev.c:2281 [inline] call_netdevice_notifiers net/core/dev.c:2295 [inline] __dev_change_net_namespace+0xcb7/0x2050 net/core/dev.c:12592 do_setlink+0x2ce/0x4590 net/core/rtnetlink.c:3060 rtnl_changelink net/core/rtnetlink.c:3776 [inline] __rtnl_newlink net/core/rtnetlink.c:3935 [inline] rtnl_newlink+0x15a9/0x1be0 net/core/rtnetlink.c:4072 rtnetlink_rcv_msg+0x7d5/0xbe0 net/core/rtnetlink.c:6958 netlink_rcv_skb+0x232/0x4b0 net/netlink/af_netlink.c:2550 netlink_unicast_kernel net/netlink/af_netlink.c:1318 [inline] netlink_unicast+0x80f/0x9b0 net/netlink/af_netlink.c:1344 netlink_sendmsg+0x813/0xb40 net/netlink/af_netlink.c:1894 problem. Ido Schimmel found steps to reproduce ip link add name team1 type team ip link add name dummy1 mtu 1499 master team1 type dummy ip netns add ns1 ip link set dev dummy1 netns ns1 ip -n ns1 link del dev dummy1 and also found that the same issue was fixed in the bond driver in commit f51048c3e07b ("bonding: avoid NETDEV_CHANGEMTU event when unregistering slave"). Let's do similar thing for the team driver, with commit ad7c7b2172c3 ("net: hold netdev instance lock during sysfs operations") and commit 303a8487a657 ("net: s/__dev_set_mtu/__netif_set_mtu/") also applied.

In the Linux kernel, the following vulnerability has been resolved: media: radio-keene: fix memory leak in error path Fix a memory leak in usb_keene_probe(). The v4l2 control handler is initialized and controls are added, but if v4l2_device_register() or video_register_device() fails afterward, the handler was never freed, leaking memory. Add v4l2_ctrl_handler_free() call in the err_v4l2 error path to ensure the control handler is properly freed for all error paths after it is initialized.

In the Linux kernel, the following vulnerability has been resolved: media: chips-media: wave5: Fix device cleanup order to prevent kernel panic Move video device unregistration to the beginning of the remove function to ensure all video operations are stopped before cleaning up the worker thread and disabling PM runtime. This prevents hardware register access after the device has been powered down. In polling mode, the hrtimer periodically triggers wave5_vpu_timer_callback() which queues work to the kthread worker. The worker executes wave5_vpu_irq_work_fn() which reads hardware registers via wave5_vdi_read_register(). The original cleanup order disabled PM runtime and powered down hardware before unregistering video devices. When autosuspend triggers and powers off the hardware, the video devices are still registered and the worker thread can still be triggered by the hrtimer, causing it to attempt reading registers from powered-off hardware. This results in a bus error (synchronous external abort) and kernel panic. This causes random kernel panics during encoding operations: Internal error: synchronous external abort: 0000000096000010 [#1] PREEMPT SMP Modules linked in: wave5 rpmsg_ctrl rpmsg_char ... CPU: 0 UID: 0 PID: 1520 Comm: vpu_irq_thread Tainted: G M W pc : wave5_vdi_read_register+0x10/0x38 [wave5] lr : wave5_vpu_irq_work_fn+0x28/0x60 [wave5] Call trace: wave5_vdi_read_register+0x10/0x38 [wave5] kthread_worker_fn+0xd8/0x238 kthread+0x104/0x120 ret_from_fork+0x10/0x20 Code: aa1e03e9 d503201f f9416800 8b214000 (b9400000) ---[ end trace 0000000000000000 ]--- Kernel panic - not syncing: synchronous external abort: Fatal exception

In the Linux kernel, the following vulnerability has been resolved: hfs: Replace BUG_ON with error handling for CNID count checks In a06ec283e125 next_id, folder_count, and file_count in the super block info were expanded to 64 bits, and BUG_ONs were added to detect overflow. This triggered an error reported by syzbot: if the MDB is corrupted, the BUG_ON is triggered. This patch replaces this mechanism with proper error handling and resolves the syzbot reported bug. Singed-off-by: Jori Koolstra <jkoolstra@xs4all.nl>

In the Linux kernel, the following vulnerability has been resolved: clocksource/drivers/sh_tmu: Always leave device running after probe The TMU device can be used as both a clocksource and a clockevent provider. The driver tries to be smart and power itself on and off, as well as enabling and disabling its clock when it's not in operation. This behavior is slightly altered if the TMU is used as an early platform device in which case the device is left powered on after probe, but the clock is still enabled and disabled at runtime. This has worked for a long time, but recent improvements in PREEMPT_RT and PROVE_LOCKING have highlighted an issue. As the TMU registers itself as a clockevent provider, clockevents_register_device(), it needs to use raw spinlocks internally as this is the context of which the clockevent framework interacts with the TMU driver. However in the context of holding a raw spinlock the TMU driver can't really manage its power state or clock with calls to pm_runtime_*() and clk_*() as these calls end up in other platform drivers using regular spinlocks to control power and clocks. This mix of spinlock contexts trips a lockdep warning. ============================= [ BUG: Invalid wait context ] 6.18.0-arm64-renesas-09926-gee959e7c5e34 #1 Not tainted ----------------------------- swapper/0/0 is trying to lock: ffff000008c9e180 (&dev->power.lock){-...}-{3:3}, at: __pm_runtime_resume+0x38/0x88 other info that might help us debug this: context-{5:5} 1 lock held by swapper/0/0: ccree e6601000.crypto: ARM CryptoCell 630P Driver: HW version 0xAF400001/0xDCC63000, Driver version 5.0 #0: ffff8000817ec298 ccree e6601000.crypto: ARM ccree device initialized (tick_broadcast_lock){-...}-{2:2}, at: __tick_broadcast_oneshot_control+0xa4/0x3a8 stack backtrace: CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 6.18.0-arm64-renesas-09926-gee959e7c5e34 #1 PREEMPT Hardware name: Renesas Salvator-X 2nd version board based on r8a77965 (DT) Call trace: show_stack+0x14/0x1c (C) dump_stack_lvl+0x6c/0x90 dump_stack+0x14/0x1c __lock_acquire+0x904/0x1584 lock_acquire+0x220/0x34c _raw_spin_lock_irqsave+0x58/0x80 __pm_runtime_resume+0x38/0x88 sh_tmu_clock_event_set_oneshot+0x84/0xd4 clockevents_switch_state+0xfc/0x13c tick_broadcast_set_event+0x30/0xa4 __tick_broadcast_oneshot_control+0x1e0/0x3a8 tick_broadcast_oneshot_control+0x30/0x40 cpuidle_enter_state+0x40c/0x680 cpuidle_enter+0x30/0x40 do_idle+0x1f4/0x280 cpu_startup_entry+0x34/0x40 kernel_init+0x0/0x130 do_one_initcall+0x0/0x230 __primary_switched+0x88/0x90 For non-PREEMPT_RT builds this is not really an issue, but for PREEMPT_RT builds where normal spinlocks can sleep this might be an issue. Be cautious and always leave the power and clock running after probe.

In the Linux kernel, the following vulnerability has been resolved: staging: rtl8723bs: fix memory leak on failure path cfg80211_inform_bss_frame() may return NULL on failure. In that case, the allocated buffer 'buf' is not freed and the function returns early, leading to potential memory leak. Fix this by ensuring that 'buf' is freed on both success and failure paths.

In the Linux kernel, the following vulnerability has been resolved: io_uring/zcrx: fix sgtable leak on mapping failures In an unlikely case when io_populate_area_dma() fails, which could only happen on a PAGE_POOL_32BIT_ARCH_WITH_64BIT_DMA machine, io_zcrx_map_area() will have an initialised and not freed table. It was supposed to be cleaned up in the error path, but !is_mapped prevents that.

In the Linux kernel, the following vulnerability has been resolved: media: pvrusb2: fix URB leak in pvr2_send_request_ex When pvr2_send_request_ex() submits a write URB successfully but fails to submit the read URB (e.g. returns -ENOMEM), it returns immediately without waiting for the write URB to complete. Since the driver reuses the same URB structure, a subsequent call to pvr2_send_request_ex() attempts to submit the still-active write URB, triggering a 'URB submitted while active' warning in usb_submit_urb(). Fix this by ensuring the write URB is unlinked and waited upon if the read URB submission fails.

In the Linux kernel, the following vulnerability has been resolved: ipmi: ipmb: initialise event handler read bytes IPMB doesn't use i2c reads, but the handler needs to set a value. Otherwise an i2c read will return an uninitialised value from the bus driver.