CVE Database

In the Linux kernel, the following vulnerability has been resolved: drm/msm/gem: fix error handling in msm_ioctl_gem_info_get_metadata() msm_ioctl_gem_info_get_metadata() always returns 0 regardless of errors. When copy_to_user() fails or the user buffer is too small, the error code stored in ret is ignored because the function unconditionally returns 0. This causes userspace to believe the ioctl succeeded when it did not. Additionally, kmemdup() can return NULL on allocation failure, but the return value is not checked. This leads to a NULL pointer dereference in the subsequent copy_to_user() call. Add the missing NULL check for kmemdup() and return ret instead of 0. Note that the SET counterpart (msm_ioctl_gem_info_set_metadata) correctly returns ret. Patchwork: https://patchwork.freedesktop.org/patch/714478/

In the Linux kernel, the following vulnerability has been resolved: vsock/virtio: fix empty payload in tap skb for non-linear buffers For non-linear skbs, virtio_transport_build_skb() goes through virtio_transport_copy_nonlinear_skb() to copy the original payload in the new skb to be delivered to the vsockmon tap device. This manually initializes an iov_iter but does not set iov_iter.count. Since the iov_iter is zero-initialized, the copy length is zero and no payload is actually copied to the monitor interface, leaving data un-initialized. Fix this by removing the linear vs non-linear split and using skb_copy_datagram_iter() with iov_iter_kvec() for all cases, as vhost-vsock already does. This handles both linear and non-linear skbs, properly initializes the iov_iter, and removes the now unused virtio_transport_copy_nonlinear_skb(). While touching this code, let's also check the return value of skb_copy_datagram_iter(), even though it's unlikely to fail.

In the Linux kernel, the following vulnerability has been resolved: HID: appletb-kbd: run inactivity autodim from workqueues The autodim code in hid-appletb-kbd takes backlight_device->ops_lock via backlight_device_set_brightness() -> mutex_lock() from two different atomic contexts: * appletb_inactivity_timer() is a struct timer_list callback, so it runs in softirq context. Every expiry triggers BUG: sleeping function called from invalid context at kernel/locking/mutex.c:591 Call Trace: <IRQ> __might_resched __mutex_lock backlight_device_set_brightness appletb_inactivity_timer call_timer_fn run_timer_softirq * reset_inactivity_timer() is called from appletb_kbd_hid_event() and appletb_kbd_inp_event(). On real USB hardware these run in softirq/IRQ context (URB completion and input-event dispatch). When the Touch Bar has already been dimmed or turned off, the reset path calls backlight_device_set_brightness() directly to restore brightness, producing the same warning. Both call sites hit the same mutex_lock()-from-atomic bug. Fix them together by moving the blocking work onto the system workqueue: * Convert the inactivity timer from struct timer_list to struct delayed_work; the callback (appletb_inactivity_work) now runs in process context where mutex_lock() is legal. * Add a dedicated struct work_struct restore_brightness_work and have reset_inactivity_timer() schedule it instead of calling backlight_device_set_brightness() directly. Cancel both works synchronously during driver tear-down alongside the existing backlight reference drop. The semantics are unchanged (same delays, same state transitions on dim, turn-off and user activity); only the execution context of the sleeping call changes. The timer field and callback are renamed to match their new type; reset_inactivity_timer() keeps its name because it is invoked from input event paths that read naturally as "reset the inactivity timer".

In the Linux kernel, the following vulnerability has been resolved: spi: mpc52xx: fix controller deregistration Make sure to deregister the controller before disabling and releasing underlying resources like interrupts and gpios during driver unbind.

In the Linux kernel, the following vulnerability has been resolved: tracepoint: balance regfunc() on func_add() failure in tracepoint_add_func() When a tracepoint goes through the 0 -> 1 transition, tracepoint_add_func() invokes the subsystem's ext->regfunc() before attempting to install the new probe via func_add(). If func_add() then fails (for example, when allocate_probes() cannot allocate a new probe array under memory pressure and returns -ENOMEM), the function returns the error without calling the matching ext->unregfunc(), leaving the side effects of regfunc() behind with no installed probe to justify them. For syscall tracepoints this is particularly unpleasant: syscall_regfunc() bumps sys_tracepoint_refcount and sets SYSCALL_TRACEPOINT on every task. After a leaked failure, the refcount is stuck at a non-zero value with no consumer, and every task continues paying the syscall trace entry/exit overhead until reboot. Other subsystems providing regfunc()/unregfunc() pairs exhibit similarly scoped persistent state. Mirror the existing 1 -> 0 cleanup and call ext->unregfunc() in the func_add() error path, gated on the same condition used there so the unwind is symmetric with the registration.

In the Linux kernel, the following vulnerability has been resolved: f2fs: fix node_cnt race between extent node destroy and writeback f2fs_destroy_extent_node() does not set FI_NO_EXTENT before clearing extent nodes. When called from f2fs_drop_inode() with I_SYNC set, concurrent kworker writeback can insert new extent nodes into the same extent tree, racing with the destroy and triggering f2fs_bug_on() in __destroy_extent_node(). The scenario is as follows: drop inode writeback - iput - f2fs_drop_inode // I_SYNC set - f2fs_destroy_extent_node - __destroy_extent_node - while (node_cnt) { write_lock(&et->lock) __free_extent_tree write_unlock(&et->lock) - __writeback_single_inode - f2fs_outplace_write_data - f2fs_update_read_extent_cache - __update_extent_tree_range // FI_NO_EXTENT not set, // insert new extent node } // node_cnt == 0, exit while - f2fs_bug_on(node_cnt) // node_cnt > 0 Additionally, __update_extent_tree_range() only checks FI_NO_EXTENT for EX_READ type, leaving EX_BLOCK_AGE updates completely unprotected. This patch set FI_NO_EXTENT under et->lock in __destroy_extent_node(), consistent with other callers (__update_extent_tree_range and __drop_extent_tree) and check FI_NO_EXTENT for both EX_READ and EX_BLOCK_AGE tree.

In the Linux kernel, the following vulnerability has been resolved: xfrm: ah: account for ESN high bits in async callbacks AH allocates its temporary auth/ICV layout differently when ESN is enabled: the async ahash setup appends a 4-byte seqhi slot before the ICV or auth_data area, but the async completion callbacks still reconstruct the temporary layout as if seqhi were absent. With an async AH implementation selected, that makes AH copy or compare the wrong bytes on both the IPv4 and IPv6 paths. In UML repro on IPv4 AH with ESN and forced async hmac(sha1), ping fails with 100% packet loss, and the callback logs show the pre-fix drift: ah4 output_done: esn=1 err=0 icv_off=20 expected_off=24 ah4 input_done: esn=1 auth_off=20 expected_auth_off=24 icv_off=32 expected_icv_off=36 Reconstruct the callback-side layout the same way the setup path built it by skipping the ESN seqhi slot before locating the saved auth_data or ICV. Per RFC 4302, the ESN high-order 32 bits participate in the AH ICV computation, so the async callbacks must account for the seqhi slot. Post-fix, the same IPv4 AH+ESN+forced-async-hmac(sha1) UML repro shows the corrected offset (ah4 output_done: esn=1 err=0 icv_off=24 expected_off=24) and ping succeeds; net/ipv4/ah4.o and net/ipv6/ah6.o build clean at W=1. IPv6 AH+ESN was not exercised at runtime, and the change has not been tested against a real async hardware AH engine.

In the Linux kernel, the following vulnerability has been resolved: spi: microchip-core-qspi: don't attempt to transmit during emulated read-only dual/quad operations The core will deal with reads by creating clock cycles itself, there's no need to generate clock cycles by transmitting garbage data at the driver level. Further, transmitting garbage data just bricks the transfer since QSPI doesn't have a dedicated master-out line like MOSI in regular SPI. I'm not entirely sure if the transfer is bricked because of the garbage data being transmitted on the bus or because the core loses track of whether it is supposed to be sending or receiving data.

In the Linux kernel, the following vulnerability has been resolved: octeon_ep_vf: add NULL check for napi_build_skb() napi_build_skb() can return NULL on allocation failure. In __octep_vf_oq_process_rx(), the result is used directly without a NULL check in both the single-buffer and multi-fragment paths, leading to a NULL pointer dereference. Add NULL checks after both napi_build_skb() calls, properly advancing descriptors and consuming remaining fragments on failure.

In the Linux kernel, the following vulnerability has been resolved: wifi: rsi: fix kthread lifetime race between self-exit and external-stop RSI driver use both self-exit(kthread_complete_and_exit) and external-stop (kthread_stop) when killing a kthread. Generally, kthread_stop() is called first, and in this case, no particular issues occur. However, in rare instances where kthread_complete_and_exit() is called first and then kthread_stop() is called, a UAF occurs because the kthread object, which has already exited and been freed, is accessed again. Therefore, to prevent this with minimal modification, you must remove kthread_stop() and change the code to wait until the self-exit operation is completed.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: virtio_bt: validate rx pkt_type header length virtbt_rx_handle() reads the leading pkt_type byte from the RX skb and forwards the remainder to hci_recv_frame() for every event/ACL/SCO/ISO type, without checking that the remaining payload is at least the fixed HCI header for that type. After the preceding patch bounds the backend-supplied used.len to [1, VIRTBT_RX_BUF_SIZE], a one-byte completion still reaches hci_recv_frame() with skb->len already pulled to 0. If the byte happened to be HCI_ACLDATA_PKT, the ACL-vs-ISO classification fast-path in hci_dev_classify_pkt_type() dereferences hci_acl_hdr(skb)->handle whenever the HCI device has an active CIS_LINK, BIS_LINK, or PA_LINK connection, reading two bytes of uninitialized RX-buffer data. The same hazard exists for every packet type the driver accepts because none of the switch cases in virtbt_rx_handle() check skb->len against the per-type minimum HCI header size before handing the frame to the core. After stripping pkt_type, require skb->len to cover the fixed header size for the selected type (event 2, ACL 4, SCO 3, ISO 4) before calling hci_recv_frame(); drop ratelimited otherwise. Unknown pkt_type values still take the original kfree_skb() default path. Use bt_dev_err_ratelimited() because both the length and pkt_type values come from an untrusted backend that can otherwise flood the kernel log.

In the Linux kernel, the following vulnerability has been resolved: sound: ua101: fix division by zero at probe Add a missing sanity check for bNrChannels in detect_usb_format() to prevent a division by zero in playback_urb_complete() and capture_urb_complete(). USB core does not validate class-specific descriptor fields such as bNrChannels, so drivers must verify them before use. If a device provides bNrChannels = 0, frame_bytes becomes zero and is later used as a divisor in the URB completion handlers, leading to a kernel crash.

In the Linux kernel, the following vulnerability has been resolved: pseries/papr-hvpipe: Prevent kernel stack memory leak to userspace The hdr variable is allocated on the stack and only hdr.version and hdr.flags are initialized explicitly. Because the struct papr_hvpipe_hdr contains reserved padding bytes (reserved[3] and reserved2[40]), these could leak the uninitialized bytes to userspace after copy_to_user(). This patch fixes that by initializing the whole struct to 0.

In the Linux kernel, the following vulnerability has been resolved: ASoC: SOF: Don't allow pointer operations on unconfigured streams When reporting the pointer for a compressed stream we report the current I/O frame position by dividing the position by the number of channels multiplied by the number of container bytes. These values default to 0 and are only configured as part of setting the stream parameters so this allows a divide by zero to be configured. Validate that they are non zero, returning an error if not

In the Linux kernel, the following vulnerability has been resolved: ipv6: xfrm6: release dst on error in xfrm6_rcv_encap() xfrm6_rcv_encap() performs an IPv6 route lookup when the skb does not already have a dst attached. ip6_route_input_lookup() returns a referenced dst entry even when the lookup resolves to an error route. If dst->error is set, xfrm6_rcv_encap() drops the skb without attaching the dst to the skb and without releasing the reference returned by the lookup. Repeated packets hitting this path therefore leak dst entries. Release the dst before jumping to the drop path.

In the Linux kernel, the following vulnerability has been resolved: riscv: kvm: fix vector context allocation leak When the second kzalloc (host_context.vector.datap) fails in kvm_riscv_vcpu_alloc_vector_context, the first allocation (guest_context.vector.datap) is leaked. Free it before returning.

In the Linux kernel, the following vulnerability has been resolved: mptcp: pm: ADD_ADDR rtx: free sk if last When an ADD_ADDR is retransmitted, the sk is held in sk_reset_timer(), and released at the end. If at that moment, it was the last reference being held, the sk would not be freed. sock_put() should then be called instead of __sock_put(). But that's not enough: if it is the last reference, sock_put() will call sk_free(), which will end up calling sk_stop_timer_sync() on the same timer, and waiting indefinitely to finish. So it is needed to mark that the timer is done at the end of the timer handler when it has not been rescheduled, not to call sk_stop_timer_sync() on "itself".

In the Linux kernel, the following vulnerability has been resolved: hfsplus: fix uninit-value by validating catalog record size Syzbot reported a KMSAN uninit-value issue in hfsplus_strcasecmp(). The root cause is that hfs_brec_read() doesn't validate that the on-disk record size matches the expected size for the record type being read. When mounting a corrupted filesystem, hfs_brec_read() may read less data than expected. For example, when reading a catalog thread record, the debug output showed: HFSPLUS_BREC_READ: rec_len=520, fd->entrylength=26 HFSPLUS_BREC_READ: WARNING - entrylength (26) < rec_len (520) - PARTIAL READ! hfs_brec_read() only validates that entrylength is not greater than the buffer size, but doesn't check if it's less than expected. It successfully reads 26 bytes into a 520-byte structure and returns success, leaving 494 bytes uninitialized. This uninitialized data in tmp.thread.nodeName then gets copied by hfsplus_cat_build_key_uni() and used by hfsplus_strcasecmp(), triggering the KMSAN warning when the uninitialized bytes are used as array indices in case_fold(). Fix by introducing hfsplus_brec_read_cat() wrapper that: 1. Calls hfs_brec_read() to read the data 2. Validates the record size based on the type field: - Fixed size for folder and file records - Variable size for thread records (depends on string length) 3. Returns -EIO if size doesn't match expected For thread records, check against HFSPLUS_MIN_THREAD_SZ before reading nodeName.length to avoid reading uninitialized data at call sites that don't zero-initialize the entry structure. Also initialize the tmp variable in hfsplus_find_cat() as defensive programming to ensure no uninitialized data even if validation is bypassed.

In the Linux kernel, the following vulnerability has been resolved: mptcp: fix scheduling with atomic in timestamp sockopt Using lock_sock_fast() (atomic context) around sock_set_timestamp() and sock_set_timestamping() is unsafe, as both helpers can sleep. Replace lock_sock_fast() with sleepable lock_sock()/release_sock() to avoid scheduling while atomic panic.

In the Linux kernel, the following vulnerability has been resolved: usb: usblp: fix uninitialized heap leak via LPGETSTATUS ioctl Just like in a previous problem in this driver, usblp_ctrl_msg() will collapse the usb_control_msg() return value to 0/-errno, discarding the actual number of bytes transferred. Ideally that short command should be detected and error out, but many printers are known to send "incorrect" responses back so we can't just do that. statusbuf is kmalloc(8) at probe time and never filled before the first LPGETSTATUS ioctl. usblp_read_status() requests 1 byte. If a malicious printer responds with zero bytes, *statusbuf is one byte of stale kmalloc heap, sign-extended into the local int status, which the LPGETSTATUS path then copy_to_user()s directly to the ioctl caller. Fix this all by just zapping out the memory buffer when allocated at probe time. If a later call does a short read, the data will be identical to what the device sent it the last time, so there is no "leak" of information happening.

In the Linux kernel, the following vulnerability has been resolved: openvswitch: vport: fix self-deadlock on release of tunnel ports vports are used concurrently and protected by RCU, so netdev_put() must happen after the RCU grace period. So, either in an RCU call or after the synchronize_net(). The rtnl_delete_link() must happen under RTNL and so can't be executed in RCU context. Calling synchronize_net() while holding RTNL is not a good idea for performance and system stability under load in general, so calling netdev_put() in RCU call is the right solution here. However, when the device is deleted, rtnl_unlock() will call netdev_run_todo() and block until all the references are gone. In the current code this means that we never reach the call_rcu() and the vport is never freed and the reference is never released, causing a self-deadlock on device removal. Fix that by moving the rcu_call() before the rtnl_unlock(), so the scheduled RCU callback will be executed when synchronize_net() is called from the rtnl_unlock()->netdev_run_todo() while the RTNL itself is already released.

In the Linux kernel, the following vulnerability has been resolved: md/raid10: fix divide-by-zero in setup_geo() with zero far_copies setup_geo() extracts near_copies (nc) and far_copies (fc) from the user-provided layout parameter without checking for zero. When fc=0 with the "improved" far set layout selected, 'geo->far_set_size = disks / fc' triggers a divide-by-zero. Validate nc and fc immediately after extraction, returning -1 if either is zero.

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix missing last_unlink_trans update when removing a directory When removing a directory we are not updating its last_unlink_trans field, which can result in incorrect fsync behaviour in case some one fsyncs the directory after it was removed because it's holding a file descriptor on it. Example scenario: mkdir /mnt/dir1 mkdir /mnt/dir1/dir2 mkdir /mnt/dir3 sync -f /mnt # Do some change to the directory and fsync it. chmod 700 /mnt/dir1 xfs_io -c fsync /mnt/dir1 # Move dir2 out of dir1 so that dir1 becomes empty. mv /mnt/dir1/dir2 /mnt/dir3/ open fd on /mnt/dir1 call rmdir(2) on path "/mnt/dir1" fsync fd <trigger power failure> When attempting to mount the filesystem, the log replay will fail with an -EIO error and dmesg/syslog has the following: [445771.626482] BTRFS info (device dm-0): first mount of filesystem 0368bbea-6c5e-44b5-b409-09abe496e650 [445771.626486] BTRFS info (device dm-0): using crc32c checksum algorithm [445771.627912] BTRFS info (device dm-0): start tree-log replay [445771.628335] page: refcount:2 mapcount:0 mapping:0000000061443ddc index:0x1d00 pfn:0x7072a5 [445771.629453] memcg:ffff89f400351b00 [445771.629892] aops:btree_aops [btrfs] ino:1 [445771.630737] flags: 0x17fffc00000402a(uptodate|lru|private|writeback|node=0|zone=2|lastcpupid=0x1ffff) [445771.632359] raw: 017fffc00000402a fffff47284d950c8 fffff472907b7c08 ffff89f458e412b8 [445771.633713] raw: 0000000000001d00 ffff89f6c51d1a90 00000002ffffffff ffff89f400351b00 [445771.635029] page dumped because: eb page dump [445771.635825] BTRFS critical (device dm-0): corrupt leaf: root=5 block=30408704 slot=10 ino=258, invalid nlink: has 2 expect no more than 1 for dir [445771.638088] BTRFS info (device dm-0): leaf 30408704 gen 10 total ptrs 17 free space 14878 owner 5 [445771.638091] BTRFS info (device dm-0): refs 4 lock_owner 0 current 3581087 [445771.638094] item 0 key (256 INODE_ITEM 0) itemoff 16123 itemsize 160 [445771.638097] inode generation 3 transid 9 size 16 nbytes 16384 [445771.638098] block group 0 mode 40755 links 1 uid 0 gid 0 [445771.638100] rdev 0 sequence 2 flags 0x0 [445771.638102] atime 1775744884.0 [445771.660056] ctime 1775744885.645502983 [445771.660058] mtime 1775744885.645502983 [445771.660060] otime 1775744884.0 [445771.660062] item 1 key (256 INODE_REF 256) itemoff 16111 itemsize 12 [445771.660064] index 0 name_len 2 [445771.660066] item 2 key (256 DIR_ITEM 1843588421) itemoff 16077 itemsize 34 [445771.660068] location key (259 1 0) type 2 [445771.660070] transid 9 data_len 0 name_len 4 [445771.660075] item 3 key (256 DIR_ITEM 2363071922) itemoff 16043 itemsize 34 [445771.660076] location key (257 1 0) type 2 [445771.660077] transid 9 data_len 0 name_len 4 [445771.660078] item 4 key (256 DIR_INDEX 2) itemoff 16009 itemsize 34 [445771.660079] location key (257 1 0) type 2 [445771.660080] transid 9 data_len 0 name_len 4 [445771.660081] item 5 key (256 DIR_INDEX 3) itemoff 15975 itemsize 34 [445771.660082] location key (259 1 0) type 2 [445771.660083] transid 9 data_len 0 name_len 4 [445771.660084] item 6 key (257 INODE_ITEM 0) itemoff 15815 itemsize 160 [445771.660086] inode generation 9 transid 9 size 8 nbytes 0 [445771.660087] block group 0 mode 40777 links 1 uid 0 gid 0 [445771.660088] rdev 0 sequence 2 flags 0x0 [445771.660089] atime 1775744885.641174097 [445771.660090] ctime 1775744885.645502983 [445771.660091] mtime 1775744885.645502983 [445771.660105] otime 1775744885.641174097 [445771.660106] item 7 key (257 INODE_REF 256) itemoff 15801 itemsize 14 [445771.660107] index 2 name_len 4 [445771.660108] item 8 key (257 DIR_ITEM 2676584006) itemoff 15767 itemsize 34 [445771.660109] location key (2 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix btrfs_ioctl_space_info() slot_count TOCTOU which can lead to info-leak btrfs_ioctl_space_info() has a TOCTOU race between two passes over the block group RAID type lists. The first pass counts entries to determine the allocation size, then the second pass fills the buffer. The groups_sem rwlock is released between passes, allowing concurrent block group removal to reduce the entry count. When the second pass fills fewer entries than the first pass counted, copy_to_user() copies the full alloc_size bytes including trailing uninitialized kmalloc bytes to userspace. Fix by copying only total_spaces entries (the actually-filled count from the second pass) instead of alloc_size bytes, and switch to kzalloc so any future copy size mismatch cannot leak heap data.

In the Linux kernel, the following vulnerability has been resolved: mptcp: pm: ADD_ADDR rtx: always decrease sk refcount When an ADD_ADDR is retransmitted, the sk is held in sk_reset_timer(). It should then be released in all cases at the end. Some (unlikely) checks were returning directly instead of calling sock_put() to decrease the refcount. Jump to a new 'exit' label to call __sock_put() (which will become sock_put() in the next commit) to fix this potential leak. While at it, drop the '!msk' check which cannot happen because it is never reset, and explicitly mark the remaining one as "unlikely".

In the Linux kernel, the following vulnerability has been resolved: LoongArch: Fix potential ADE in loongson_gpu_fixup_dma_hang() The switch case in loongson_gpu_fixup_dma_hang() may not DC2 or DC3, and readl(crtc_reg) will access with random address, because the "device" is from "base+PCI_DEVICE_ID", "base" is from "pdev->devfn+1". This is wrong when my platform inserts a discrete GPU: lspci -tv -[0000:00]-+-00.0 Loongson Technology LLC Hyper Transport Bridge Controller ... +-06.0 Loongson Technology LLC LG100 GPU +-06.2 Loongson Technology LLC Device 7a37 ... Add a default switch case to fix the panic as below: Kernel ade access[#1]: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.6.136-loong64-desktop-hwe+ #4 pc 90000000017e5534 ra 90000000017e54c0 tp 90000001002f8000 sp 90000001002fb6c0 a0 80000efe00003100 a1 0000000000003100 a2 0000000000000000 a3 0000000000000002 a4 90000001002fb6b4 a5 900000087cdb58fd a6 90000000027af000 a7 0000000000000001 t0 00000000000085b9 t1 000000000000ffff t2 0000000000000000 t3 0000000000000000 t4 fffffffffffffffd t5 00000000fffb6d9c t6 0000000000083b00 t7 00000000000070c0 t8 900000087cdb4d94 u0 900000087cdb58fd s9 90000001002fb826 s0 90000000031c12c8 s1 7fffffffffffff00 s2 90000000031c12d0 s3 0000000000002710 s4 0000000000000000 s5 0000000000000000 s6 9000000100053000 s7 7fffffffffffff00 s8 90000000030d4000 ra: 90000000017e54c0 loongson_gpu_fixup_dma_hang+0x40/0x210 ERA: 90000000017e5534 loongson_gpu_fixup_dma_hang+0xb4/0x210 CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE) PRMD: 00000004 (PPLV0 +PIE -PWE) EUEN: 00000000 (-FPE -SXE -ASXE -BTE) ECFG: 00071c1d (LIE=0,2-4,10-12 VS=7) ESTAT: 00480000 [ADEM] (IS= ECode=8 EsubCode=1) BADV: 7fffffffffffff00 PRID: 0014d000 (Loongson-64bit, Loongson-3A6000-HV) Modules linked in: Process swapper/0 (pid: 1, threadinfo=(____ptrval____), task=(____ptrval____)) Stack : 0000000000000006 90000001002fb778 90000001002fb704 0000000000000007 0000000016a65700 90000000017e5690 000000000000ffff ffffffffffffffff 900000000209f7c0 9000000100053000 900000000209f7a8 9000000000eebc08 0000000000000000 0000000000000000 0000000000000006 90000001002fb778 90000001000530b8 90000000027af000 0000000000000000 9000000100054000 9000000100053000 9000000000ebb70c 9000000100004c00 9000000004000001 90000001002fb7e4 bae765461f31cb12 0000000000000000 0000000000000000 0000000000000006 90000000027af000 0000000000000030 90000000027af000 900000087cd6f800 9000000100053000 0000000000000000 9000000000ebc560 7a2500147cdaf720 bae765461f31cb12 0000000000000001 0000000000000030 ... Call Trace: [<90000000017e5534>] loongson_gpu_fixup_dma_hang+0xb4/0x210 [<9000000000eebc08>] pci_fixup_device+0x108/0x280 [<9000000000ebb70c>] pci_setup_device+0x24c/0x690 [<9000000000ebc560>] pci_scan_single_device+0xe0/0x140 [<9000000000ebc684>] pci_scan_slot+0xc4/0x280 [<9000000000ebdd00>] pci_scan_child_bus_extend+0x60/0x3f0 [<9000000000f5bc94>] acpi_pci_root_create+0x2b4/0x420 [<90000000017e5e74>] pci_acpi_scan_root+0x2d4/0x440 [<9000000000f5b02c>] acpi_pci_root_add+0x21c/0x3a0 [<9000000000f4ee54>] acpi_bus_attach+0x1a4/0x3c0 [<90000000010e200c>] device_for_each_child+0x6c/0xe0 [<9000000000f4bbf4>] acpi_dev_for_each_child+0x44/0x70 [<9000000000f4ef40>] acpi_bus_attach+0x290/0x3c0 [<90000000010e200c>] device_for_each_child+0x6c/0xe0 [<9000000000f4bbf4>] acpi_dev_for_each_child+0x44/0x70 [<9000000000f4ef40>] acpi_bus_attach+0x290/0x3c0 [<9000000000f5211c>] acpi_bus_scan+0x6c/0x280 [<900000000189c028>] acpi_scan_init+0x194/0x310 [<900000000189bc6c>] acpi_init+0xcc/0x140 [<9000000000220cdc>] do_one_initcall+0x4c/0x310 [<90000000018618fc>] kernel_init_freeable+0x258/0x2d4 [<900000000184326c>] kernel_init+0x28/0x13c [<9000000000222008>] ret_from_kernel_thread+0xc/0xa4

In the Linux kernel, the following vulnerability has been resolved: 8021q: delete cleared egress QoS mappings vlan_dev_set_egress_priority() currently keeps cleared egress priority mappings in the hash as tombstones. Repeated set/clear cycles with distinct skb priorities therefore accumulate mapping nodes until device teardown and leak memory. Delete mappings when vlan_prio is cleared instead of keeping tombstones. Now that the egress mapping lists are RCU protected, the node can be unlinked safely and freed after a grace period.

In the Linux kernel, the following vulnerability has been resolved: usb: usblp: fix heap leak in IEEE 1284 device ID via short response usblp_ctrl_msg() collapses the usb_control_msg() return value to 0/-errno, discarding the actual number of bytes transferred. A broken printer can complete the GET_DEVICE_ID control transfer short and the driver has no way to know. usblp_cache_device_id_string() reads the 2-byte big-endian length prefix from the response and trusts it (clamped only to the buffer bounds). The buffer is kmalloc(1024) at probe time. A device that sends exactly two bytes (e.g. 0x03 0xFF, claiming a 1023-byte ID) leaves device_id_string[2..1022] holding stale kmalloc heap. That stale data is then exposed: - via the ieee1284_id sysfs attribute (sprintf("%s", buf+2), truncated at the first NUL in the stale heap), and - via the IOCNR_GET_DEVICE_ID ioctl, which copy_to_user()s the full claimed length regardless of NULs, up to 1021 bytes of uninitialized heap, with the leak size chosen by the device. Fix this up by just zapping the buffer with zeros before each request sent to the device.

In the Linux kernel, the following vulnerability has been resolved: spi: microchip-core-qspi: control built-in cs manually The coreQSPI IP supports only a single chip select, which is automagically operated by the hardware - set low when the transmit buffer first gets written to and set high when the number of bytes written to the TOTALBYTES field of the FRAMES register have been sent on the bus. Additional devices must use GPIOs for their chip selects. It was reported to me that if there are two devices attached to this QSPI controller that the in-built chip select is set low while linux tries to access the device attached to the GPIO. This went undetected as the boards that connected multiple devices to the SPI controller all exclusively used GPIOs for chip selects, not relying on the built-in chip select at all. It turns out that this was because the built-in chip select, when controlled automagically, is set low when active and high when inactive, thereby ruling out its use for active-high devices or devices that need to transmit with the chip select disabled. Modify the driver so that it controls chip select directly, retaining the behaviour for mem_ops of setting the chip select active for the entire duration of the transfer in the exec_op callback. For regular transfers, implement the set_cs callback for the core to use. As part of this, the existing setup callback, mchp_coreqspi_setup_op(), is removed. Modifying the CLKIDLE field is not safe to do during operation when there are multiple devices, so this code is removed entirely. Setting the MASTER and ENABLE fields is something that can be done once at probe, it doesn't need to be re-run for each device. Instead the new setup callback sets the built-in chip select to its inactive state for active-low devices, as the reset value of the chip select in software controlled mode is low.

In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: Fix pin leak and publication ordering in __pkvm_init_vcpu() Two bugs exist in the vCPU initialisation path: 1. If a check fails after hyp_pin_shared_mem() succeeds, the cleanup path jumps to 'unlock' without calling unpin_host_vcpu() or unpin_host_sve_state(), permanently leaking pin references on the host vCPU and SVE state pages. Extract a register_hyp_vcpu() helper that performs the checks and the store. When register_hyp_vcpu() returns an error, call unpin_host_vcpu() and unpin_host_sve_state() inline before falling through to the existing 'unlock' label. 2. register_hyp_vcpu() publishes the new vCPU pointer into 'hyp_vm->vcpus[]' with a bare store, allowing a concurrent caller of pkvm_load_hyp_vcpu() to observe a partially initialised vCPU object. Ensure the store uses smp_store_release() and the load uses smp_load_acquire(). While 'vm_table_lock' currently serialises the store and the load, these barriers ensure the reader sees the fully initialised 'hyp_vcpu' object even if there were a lockless path or if the lock's own ordering guarantees were insufficient for nested object initialization.