CVE Database

In the Linux kernel, the following vulnerability has been resolved: drm/gem: Try to fix change_handle ioctl, attempt 4 [airlied: just added some comments on how to reenable] On-list because the cat is out of the bag and we're clearly not good enough to figure this out in private. The story thus far: 5e28b7b94408 ("drm: Set old handle to NULL before prime swap in change_handle") tried to fix a race condition between the gem_close and gem_change_handle ioctls, but got a few things wrong: - There's a confusion with the local variable handle, which is actually the new handle, and so the two-stage trick was actually applied to the wrong idr slot. 7164d78559b0 ("drm/gem: fix race between change_handle and handle_delete") tried to fix that by adding yet another code block, but forgot to add the error handling. Which meant we now have two paths, both kinda wrong. - dc366607c41c ("drm: Replace old pointer to new idr") tried to apply another fix, but inconsistently, again because of the handle confusion - this would be the right fix (kinda, somewhat, it's a mess) if we'd do the two-stage approach for the new handle. Except that wasn't the intent of the original fix. We also didn't have an igt merged for the original ioctl, which is a big no-go. This was attempted to address off-list in the original bugfix, and amd QA people claimed the bug was fixed now. Very clearly that's not the case. Here's my attempt to sort this out: - Rename the local variable to new_handle, the old aliasing with args->handle is just too dangerously confusing. - Merge the gem obj lookup with the two-stage idr_replace so that we avoid getting ourselves confused there. - This means we don't have a surplus temporary reference anymore, only an inherited from the idr. A concurrent gem_close on the new_handle could steal that. Fix that with the same two-stage approach create_tail uses. This is a bit overkill as documented in the comment, but I also don't trust my ability to understand this all correctly, so go with the established pattern we have from other ioctls instead for maximum paranoia. - Adjust error paths. I've tried to make the error and success paths common, because they are identical except for which handle is removed and on which we call idr_replace to (re)install the object again. But that made things messier to read, so I've left it at the more verbose version, which unfortunately hides the symmetry in the entire code flow a bit. - While at it, also replace the 7 space indent with 1 tab. And finally, because I flat out don't trust my abilities here at all anymore: - Disable the ioctl until we have the igt situation and everything else sorted out on-list and with full consensus. v2: Sashiko noticed that I didn't handle the error path for idr_replace correctly, it must be checked with IS_ERR_OR_NULL like in gem_handle_delete. So yeah, definitely should just the existing paths 1:1 because this is endless amounts of tricky. Also add the Fixes: line for the original ioctl, I forgot that too.

In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Fix buffer overflow in SDMA queue checkpoint/restore on GFX11 The v11 MQD manager incorrectly assigned the CP-compute variants of checkpoint_mqd/restore_mqd for KFD_MQD_TYPE_SDMA queues. These functions use sizeof(struct v11_compute_mqd) (2048 bytes) instead of sizeof(struct v11_sdma_mqd) (512 bytes), causing a 1536-byte overflow. During CRIU checkpoint of an SDMA queue on Navi3x: - checkpoint_mqd() reads 2048 bytes from a 512-byte SDMA MQD buffer, leaking 1536 bytes of adjacent GTT memory to userspace During CRIU restore: - restore_mqd() writes 2048 bytes into a 512-byte SDMA MQD buffer, corrupting 1536 bytes of adjacent GTT memory (often the ring buffer or neighboring MQDs) This is a copy-paste regression unique to v11. All other ASIC backends (cik, vi, v9, v10, v12) correctly use the SDMA-specific variants. Add checkpoint_mqd_sdma() and restore_mqd_sdma() functions that properly handle the smaller v11_sdma_mqd structure, matching the pattern used in other MQD managers. (cherry picked from commit 6fa41db7ffdec97d62433adf03b7b9b759af8c2c)

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Bound VBIOS record-chain walk loops [Why & How] All record-chain walk loops in bios_parser.c and bios_parser2.c use for(;;) and only terminate on a 0xFF record_type sentinel or zero record_size. A malformed VBIOS image missing the terminator record causes unbounded iteration at probe time, potentially hundreds of thousands of iterations with record_size=1. In the final iterations near the BIOS image boundary, struct casts beyond the 2-byte header validated by GET_IMAGE can also read out of bounds. Cap all 14 record-chain walk loops to BIOS_MAX_NUM_RECORD (256) iterations. The atombios.h defines up to 22 distinct record types and atomfirmware.h has 13. Assuming an average of less than 10 records per type (which is reasonable since most are connector- based) 256 is a generous upper bound. (cherry picked from commit 95700a3d660287ed657d6892f7be9ffc0e294a93)

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Clamp HDMI HDCP2 rx_id_list read to buffer size [Why & How] During HDCP 2.x repeater authentication over HDMI, the driver reads the sink's RxStatus register and extracts a 10-bit message size field (max value 1023). This value is used as the read length for the ReceiverID list without being clamped to the size of the destination buffer rx_id_list[177]. A malicious HDMI repeater could advertise a message size larger than the buffer, causing an out-of-bounds write during the I2C read. Clamp the read length in mod_hdcp_read_rx_id_list() to the size of the rx_id_list buffer, matching the approach already used in the DP branch. (cherry picked from commit 229212219e4247d9486f8ba41ef087358490be09)

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Clamp VBIOS HDMI retimer register count to array size [Why & How] The VBIOS integrated info tables (v1_11 and v2_1) contain HdmiRegNum and Hdmi6GRegNum fields that are used as loop bounds when copying retimer I2C register settings into fixed-size arrays (dp*_ext_hdmi_reg_settings[9] and dp*_ext_hdmi_6g_reg_settings[3]). These u8 fields are not validated before use, so a malformed VBIOS can specify values up to 255, causing an out-of-bounds heap write during driver probe. Clamp each register count to the destination array size using min_t() before the copy loops, in both get_integrated_info_v11() and get_integrated_info_v2_1(). (cherry picked from commit 5a7f0ef90195940c54b0f5bb85b87da55f038c69)

In the Linux kernel, the following vulnerability has been resolved: RDMA/umem: Fix truncation for block sizes >= 4G When the iommu is used the linearization of the mapping can give a single block that is very large split across multiple SG entries. When __rdma_block_iter_next() reassembles the split SG entries it is overflowing the 32 bit stack values and computed the wrong DMA addresses for blocks after the truncation. Use the right types to hold DMA addresses.

In the Linux kernel, the following vulnerability has been resolved: vsock/virtio: fix potential unbounded skb queue virtio_transport_inc_rx_pkt() checks vvs->rx_bytes + len > vvs->buf_alloc. virtio_transport_recv_enqueue() skips coalescing for packets with VIRTIO_VSOCK_SEQ_EOM. If fed with packets with len == 0 and VIRTIO_VSOCK_SEQ_EOM, a very large number of packets can be queued because vvs->rx_bytes stays at 0. Fix this by estimating the skb metadata size: (Number of skbs in the queue) * SKB_TRUESIZE(0)

The Tourfic – AI Powered Travel Booking, Hotel Booking & Car Rental WordPress Plugin plugin for WordPress is vulnerable to generic SQL Injection via the 'post_id' parameter in all versions up to, and including, 2.22.7 due to insufficient escaping on the user supplied parameter and lack of sufficient preparation on the existing SQL query. This makes it possible for unauthenticated attackers to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database. The AJAX handler is registered for unauthenticated users via wp_ajax_nopriv_tf_room_availability, and the required nonce is emitted on the public single-hotel page template, allowing unauthenticated attackers to freely obtain a valid nonce and reach the vulnerable code path.

The InPost PL WordPress plugin before 1.9.1 does not verify that the request originates from the legitimate buyer before allowing the WooCommerce order parcel-locker destination to be updated, allowing unauthenticated attackers to silently redirect the shipping destination of any pending or processing order on the site.

The Email Address Encoder WordPress plugin before 1.0.25, email-encoder-premium WordPress plugin before 0.3.12 does not properly handle email replacement, which could allow unauthenticated users to perform Stored XSS attacks

When a provide-xfr is given with a tls-auth-name, a secondary requesting a transfer should provide a client certificate with that name. However, no client certificate is needed when the request comes in over TLS over the regular tls-port (and not the tls-auth-port) or over over TCP over the regular port, when the other conditions of the provide-xfr rule match.

NSD version 4.14.0 introduced a bug where a specially crafted APL RR, with an adflength larger than permitted for the address family will overwrite the stack when the zone is written to disk, with a maximum of 111 attacker controlled bytes.

NSD from version 4.13.0 has a heap use-after-free bug in logging errors on TLS connections, causing a crash of the server process, which can be triggered trivially by sending a DNS query over a DoT connection, and closing the connection without reading the response.

If NSD is configured as secondary for a zone, the primary of that zone can crash NSD with an AXFR containing a DNS message with a special crafted SVCB RR with an rdata size of 65512, that let's an (uint16_t) variable that is used to allocate space needed for the RR wrap (because total size > 65535), causing a heap overflow. The attacker can perform a controlled (RCE class) head write of up to 65509 bytes

shell-quote prior to 1.8.5 finalizes parsed tokens in parse() using Array.prototype.concat as a reduce accumulator, which reallocates and copies the entire growing array on every iteration. As a result parse() runs in O(n^2) time relative to the number of input tokens. An attacker who can supply an attacker-controlled string to any code path that calls parse() (no shell metacharacters are required; plain space-separated words suffice) can block the single-threaded Node.js event loop for an extended period with a small input, resulting in a denial of service. There is no code execution or data disclosure; impact is to availability only. Fixed in 1.8.5.

GitLab has remediated an issue in GitLab EE affecting all versions from 19.1 before 19.1.1 that under certain conditions could have allowed a user to access sensitive information that had already been committed to a project, due to insufficient output filtering in Duo Workflows.

GitLab has remediated an issue in GitLab CE/EE affecting all versions from 18.10 before 18.11.6, 19.0 before 19.0.3, and 19.1 before 19.1.1 that under certain conditions could have allowed an unauthenticated user to execute arbitrary JavaScript in a user's browser session due to improper path validation under certain conditions.

GitLab has remediated an issue in GitLab EE affecting all versions from 16.4 before 18.11.6, 19.0 before 19.0.3, and 19.1 before 19.1.1 that under certain conditions could have allowed an authenticated user with developer-role permissions to execute arbitrary client-side code in the context of another user's session, due to improper sanitization of user-supplied input.

The Dokan Pro plugin for WordPress is vulnerable to time-based SQL Injection via the via 'latitude' and 'longitude' parameters in all versions up to, and including, 5.0.4 due to insufficient escaping on the user supplied parameter and lack of sufficient preparation on the existing SQL query. This makes it possible for unauthenticated attackers to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database.

OS Command Injection vulnerability in the traceroute action of Rapid7 InsightConnect Traceroute Plugin on Linux allows remote attackers to execute arbitrary OS commands via the host, port, max_ttl, count, or time_out request parameters due to insufficient input validation when constructing shell commands.

OS Command Injection vulnerability in the TR action of Rapid7 InsightConnect Translate Plugin on Linux allows remote attackers to execute arbitrary OS commands via the text or expression parameters due to insufficient input sanitization in shell command construction.

OS Command Injection vulnerability in the ping action of Rapid7 InsightConnect Ping Plugin on Linux allows remote attackers to execute arbitrary OS commands via the host parameter due to insufficient input validation when constructing shell commands.

OS Command Injection vulnerability in the process_string action of Rapid7 InsightConnect AWK Plugin on Linux allows remote attackers to execute arbitrary OS commands via the text or expression parameters due to unsafe shell command construction in the processing pipeline.

OS Command Injection vulnerability in Rapid7 InsightConnect Sed Plugin on Linux allows authenticated attackers to execute arbitrary OS commands via the expression parameter due to insufficient input validation.

Arbitrary File Write vulnerability in Rapid7 InsightConnect Sed Plugin on Linux allows authenticated attackers to write attacker-controlled content to arbitrary file paths via the expression parameter.

sys/kern/sysv_sem.c in OpenBSD through 7.9 has a use-after-free allowing local privilege escalation to root. This is a context switch use-after-free after tsleep in sys_semget().

Quest NetVault Backup NVBULogDaemon Command Injection Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of Quest NetVault Backup. Although authentication is required to exploit this vulnerability, the existing authentication mechanism can be bypassed. The specific flaw exists within the processing of NVBULogDaemon JSON-RPC messages. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of SYSTEM. Was ZDI-CAN-27625.

Quest NetVault Backup NVBUDashboard SQL Injection Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of Quest NetVault Backup. Although authentication is required to exploit this vulnerability, the existing authentication mechanism can be bypassed. The specific flaw exists within the processing of NVBUDashboard JSON-RPC messages. The issue results from the lack of proper validation of a user-supplied string before using it to construct SQL queries. An attacker can leverage this vulnerability to execute code in the context of NETWORK SERVICE. Was ZDI-CAN-27626.

Quest NetVault Backup NVBULibrarySlot SQL Injection Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of Quest NetVault Backup. Although authentication is required to exploit this vulnerability, the existing authentication mechanism can be bypassed. The specific flaw exists within the processing of NVBULibrarySlot JSON-RPC messages. The issue results from the lack of proper validation of a user-supplied string before using it to construct SQL queries. An attacker can leverage this vulnerability to execute code in the context of NETWORK SERVICE. Was ZDI-CAN-27630.

Quest NetVault Backup NVBULibraryPort SQL Injection Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of Quest NetVault Backup. Although authentication is required to exploit this vulnerability, the existing authentication mechanism can be bypassed. The specific flaw exists within the processing of NVBULibraryPort JSON-RPC messages. The issue results from the lack of proper validation of a user-supplied string before using it to construct SQL queries. An attacker can leverage this vulnerability to execute code in the context of NETWORK SERVICE. Was ZDI-CAN-27631.