CVE Database

In EmberZNet v9.0.2 and earlier, a malformed GetProfileResponse message can trigger out-of-bounds reads while iterating interval entries and terminate the process. These messages must come from a device that has already joined the network, and no information leakage back to the sender was observed. Only devices supporting the Simple Metering cluster may be impacted.

In EmberZNet v9.0.2 and earlier, a malformed Level Control Step command can terminate the process through a divide-by-zero fault. This command must come from a device that has already joined the network. Only devices supporting the Level Control cluster may be impacted.

In EmberZNet v9.0.2 and earlier, a malformed Level Control Move command can terminate the process through a divide-by-zero fault. This command must come from a device that has already joined the network. Only devices supporting the Level Control cluster may be impacted.

In EmberZNet v9.0.2 and earlier, malformed or out-of-range Door Lock user identifiers can trigger out-of-bounds table reads and terminate the process. These messages must come from a device that has already joined the network, and no information leakage back to the sender was observed. Only devices supporting the Door Lock cluster may be impacted.

In EmberZNet v9.0.2 and earlier, malformed GetGroupMembership commands can trigger repeated reads past the end of the message payload and terminate the process. These messages must come from a device that has already joined the network, and no information leakage back to the sender was observed. Only devices supporting the Groups cluster may be impacted.

In EmberZNet v9.0.2 and earlier, malformed Color Control messages can lead to asserts that terminate the process. These messages must come from a device that has already joined the network. Only devices supporting the Color Control cluster may be impacted.

In EmberZNet v9.0.2 and earlier, malformed Color Control messages can lead to asserts that terminate the process. These messages must come from a device that has already joined the network. Only devices supporting the Color Control cluster may be impacted.

Dell Display and Peripheral Manager (DDPM Mac), versions prior to 2.3, contain a Concurrent Execution using Shared Resource with Improper Synchronization ('Race Condition') vulnerability. A low privileged attacker with local access could potentially exploit this vulnerability, leading to Elevation of Privileges.

An invalid zone might pass ZONEMD validation while it should not. This is only relevant if ZoneToCache is configured with ZONEMD validation.

This fix provides extra hardening for the 5.4.x branch by doing extra validation of incoming answers from authoritative servers.

Incomplete validation of the SOA record present in a catalog zone might lead to a crash.

A malicious authoritative server can send a crafted zone via the ZoneToCache function that leads to a crash of the Recursor due to insuffcient input validation.

ECS zero scoped answers are stored in the packet cache while they should not. This impacts only configurations that have ECS enabled;

An attacker can send crafted DNS over HTTP/3 queries, triggering an exception that prevents some buffer from being freed right away. The buffer will be freed at the end of the QUIC connection, but on some setups it might be possible to open enough concurrent DoH3 streams to trigger an out-of-memory condition, resulting in a denial of service.

An out-of-bounds read might happen when SetMacAddrAction is used, potentially resulting in uninitialized memory being sent over the network or a crash.

An attacker might be able to cause outgoing TCP connections to backend to be stuck until a timeout occurs instead of being released immediately, by sending IXFR queries. This could be used to cause a denial of service if there is a limit to the number of concurrent connections to this backend, or if the process runs out of file descriptors.

An attacker can send a web request that causes unlimited memory allocation in the internal web server, leading to a denial of service. The internal web server is disabled by default.

In the Linux kernel, the following vulnerability has been resolved: net/smc: fix sleep-inside-lock in __smc_setsockopt() causing local DoS A logic flaw in __smc_setsockopt() allows a local unprivileged user to cause a Denial of Service (DoS) by holding the socket lock indefinitely. The function __smc_setsockopt() calls copy_from_sockptr() while holding lock_sock(sk). By passing a userfaultfd-monitored memory page (or FUSE-backed memory on systems where unprivileged userfaultfd is disabled) as the optval, an attacker can halt execution during the copy operation, keeping the lock held. Combined with asynchronous tear-down operations like shutdown(), this exhausts the kernel wq (kworkers) and triggers the hung task watchdog. [ 240.123456] INFO: task kworker/u8:2 blocked for more than 120 seconds. [ 240.123489] Call Trace: [ 240.123501] smc_shutdown+... [ 240.123512] lock_sock_nested+... This patch moves the user-space copy outside the lock_sock() critical section to prevent the issue.

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix NULL-deref of opinfo->conn in oplock/lease break notifiers smb2_oplock_break_noti() and smb2_lease_break_noti() read opinfo->conn into a local with neither READ_ONCE() nor a NULL check. Both run from oplock_break() after opinfo_get_list() has dropped ci->m_lock, so a concurrent SMB2 LOGOFF (session_fd_check()) can set op->conn = NULL under ci->m_lock within that window. ksmbd_conn_r_count_inc(conn) then writes through NULL at offset 0xc4 -- a remotely triggerable oops. Guard both reads the way compare_guid_key() already does: read opinfo->conn with READ_ONCE() and return early if it is NULL, before allocating the work struct so nothing leaks. A NULL conn means the client is gone and the break is moot, so return 0; oplock_break() treats that as success and runs the normal teardown.

In the Linux kernel, the following vulnerability has been resolved: netfilter: synproxy: add mutex to guard hook reference counting As the synproxy infrastructure register netfilter hooks on-demand when a user adds the first iptables target or nftables expression, if done concurrently they can race each other. Introduce a mutex to serialize the refcount control blocks access from both frontends. While a per namespace mutex might be more efficient, it is not needed for target/expression like SYNPROXY.

In the Linux kernel, the following vulnerability has been resolved: 6lowpan: fix off-by-one in multicast context address compression The second memcpy in lowpan_iphc_mcast_ctx_addr_compress() uses &data[1] as destination and &ipaddr->s6_addr[11] as source, but both should be offset by one: &data[2] and &ipaddr->s6_addr[12] respectively. This off-by-one has two consequences: 1. data[1] is overwritten with s6_addr[11], corrupting the RIID field in the compressed multicast address 2. data[5] is never written, so uninitialized kernel stack memory is transmitted over the network via lowpan_push_hc_data(), leaking kernel stack contents The correct inline data layout must match what the decompression function lowpan_uncompress_multicast_ctx_daddr() expects: data[0..1] = s6_addr[1..2] (flags/scope + RIID) data[2..5] = s6_addr[12..15] (group ID) Also zero-initialize the data array as a defensive measure against similar bugs in the future.

In the Linux kernel, the following vulnerability has been resolved: devlink: Release nested relation on devlink free devlink relation state is normally released from devl_unregister(), which calls devlink_rel_put(). This misses devlink instances that get a nested relation before registration and then fail probe before devl_register() is reached. That flow can happen for SFs. The child devlink gets linked to its parent before registration, then a later probe error calls devlink_free() directly. Since the instance was never registered, devl_unregister() is not called and devlink->rel is leaked. Release any pending relation from devlink_free() as well. The registered path is unchanged because devl_unregister() already clears devlink->rel before devlink_free() runs.

In the Linux kernel, the following vulnerability has been resolved: wifi: fix leak if split 6 GHz scanning fails rdev->int_scan_req is leaked if cfg80211_scan() fails. Note that it's supposed to be released at ___cfg80211_scan_done() but this doesn't happen as rdev->scan_req is NULL at that point, too, leading to the early return from the freeing function. unreferenced object 0xffff8881161d0800 (size 512): comm "wpa_supplicant", pid 379, jiffies 4294749765 hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 f0 81 13 16 81 88 ff ff ................ backtrace (crc c867fdb6): kmemleak_alloc+0x89/0x90 __kmalloc_noprof+0x2fd/0x410 cfg80211_scan+0x133/0x730 nl80211_trigger_scan+0xc69/0x1cc0 genl_family_rcv_msg_doit+0x204/0x2f0 genl_rcv_msg+0x431/0x6b0 netlink_rcv_skb+0x143/0x3f0 genl_rcv+0x27/0x40 netlink_unicast+0x4f6/0x820 netlink_sendmsg+0x797/0xce0 __sock_sendmsg+0xc4/0x160 ____sys_sendmsg+0x5e4/0x890 ___sys_sendmsg+0xf8/0x180 __sys_sendmsg+0x136/0x1e0 __x64_sys_sendmsg+0x76/0xc0 x64_sys_call+0x13f0/0x17d0 Found by Linux Verification Center (linuxtesting.org).

In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: enforce HE/EHT cap/oper consistency Xiang Mei reports that mac80211 could crash if eht_cap is set but eht_oper isn't. Rather than fixing that for the individual user(s), enforce that both HE/EHT have consistent elements.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: fix memory leak in error path of hci_alloc_dev() Early failures in Bluetooth HCI UART configuration leak SRCU percpu memory. When device initialization fails before hci_register_dev() completes, the HCI_UNREGISTER flag is never set. As a result, when the device reference count reaches zero, bt_host_release() evaluates this flag as false and falls back to a direct kfree(hdev). Because hci_release_dev() is bypassed, the SRCU struct initialized early in hci_alloc_dev() is never cleaned up, resulting in a leak of percpu memory. Fix the leak by explicitly calling cleanup_srcu_struct() in the fallback (unregistered) branch of bt_host_release() before freeing the device.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: Fix not releasing hdev reference on iso_conn_big_sync hci_get_route() returns a reference-counted hci_dev pointer via hci_dev_hold(). The function exits normally or with an error without ever releasing it.

In the Linux kernel, the following vulnerability has been resolved: ipv4: restrict IPOPT_SSRR and IPOPT_LSRR options This patch restricts setting Loose Source and Record Route (LSRR) and Strict Source and Record Route (SSRR) IP options to users with CAP_NET_RAW capability. This prevents unprivileged applications from forcing packets to route through attacker-controlled nodes to leak TCP ISN and possibly other protocol information. While LSRR and SSRR are commonly filtered in many network environments, they may still be supported and forwarded along some network paths. RFC 7126 (Recommendations on Filtering of IPv4 Packets Containing IPv4 Options) recommend to drop these options in 4.3 and 4.4.

In the Linux kernel, the following vulnerability has been resolved: net/802/mrp: fix vector attribute parsing in mrp_pdu_parse_vecattr In mrp_pdu_parse_vecattr(), vector attribute events are encoded three per byte and valen tracks the number of events left to process. The parser decrements valen after processing the first and second events from each event byte, but not after processing the third one. When valen is exactly a multiple of three, the loop continues after the last valid event and consumes the next byte as a new event byte, applying a spurious event to the MRP applicant state. Additionally, when valen is zero the parser unconditionally consumes attrlen bytes as FirstValue and advances the offset, even though per IEEE 802.1ak a VectorAttribute with only a LeaveAllEvent has valen of zero and no FirstValue or Vector fields. This corrupts the offset for subsequent PDU parsing. Also, when valen exceeds three the loop crosses byte boundaries but the attribute value is not incremented between the last event of one byte and the first event of the next. This causes the first event of the next byte to use the same attribute value as the third event rather than the next consecutive value. Decrement valen after processing the third event, skip FirstValue consumption when valen is zero, and increment the attribute value at the end of each loop iteration.

In the Linux kernel, the following vulnerability has been resolved: rseq: Fix using an uninitialized stack variable in rseq_exit_user_update() There is an bug in which an uninitialized stack variable is used in rseq_exit_user_update() as reported by syzbot: BUG: KMSAN: kernel-infoleak in rseq_set_ids_get_csaddr include/linux/rseq_entry.h:502 [inline] The local variable: struct rseq_ids ids = { .cpu_id = task_cpu(t), .mm_cid = task_mm_cid(t), .node_id = cpu_to_node(ids.cpu_id), }; According to the C standard, the evaluation order of expressions in an initializer list is indeterminately sequenced. The compiler (Clang, in this KMSAN build) evaluates `cpu_to_node(ids.cpu_id)` *before* `ids.cpu_id` is initialized with `task_cpu(t)`. This is fixed by moving the assignment of ids.node_id outside the structure initialization.

In the Linux kernel, the following vulnerability has been resolved: ALSA: seq: dummy: fix UMP event stack overread The dummy sequencer port forwards events by copying an incoming struct snd_seq_event into a stack temporary, rewriting source and destination, and dispatching the temporary to subscribers. That legacy event storage is smaller than struct snd_seq_ump_event. When a UMP event reaches the dummy client, the copy leaves the UMP flag set but only provides legacy-sized stack storage. The subscriber delivery path then uses snd_seq_event_packet_size() and copies a UMP-sized packet from that stack object, reading past the end of the temporary. Use the existing union __snd_seq_event storage and copy the packet size reported for the incoming event before rewriting the common routing fields. This preserves the full UMP packet for UMP events while keeping legacy event handling unchanged.