CVE Database

A vulnerability in Datagram TLS (DTLS) message handling of Cisco Secure Firewall Adaptive Security Appliance (ASA) Software and Cisco Secure Firewall Threat Defense (FTD) Software for Cisco Secure Firewall 3100 Series and 4200 Series devices could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to improper resource management when processing certain DTLS messages. An attacker could exploit this vulnerability by sending a crafted stream of DTLS traffic to an affected device. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition.

A vulnerability in the certification authentication feature of Internet Key Exchange version 2 (IKEv2) for Cisco Secure Firewall Adaptive Security Appliance (ASA) Software and Cisco Secure Firewall Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause an affected device to reload unexpectedly. This vulnerability is due to a logic error during the certificate authentication phase of the IKEv2 connection setup. An attacker could exploit this vulnerability by attempting to establish an IKEv2 VPN connection with a crafted certificate. A successful exploit could allow the attacker to cause the IKEv2 process to crash, causing a denial of service (DoS) condition.

A vulnerability in Cisco ISE could allow an unauthenticated, remote attacker to conduct SQL injection attacks on an affected device. This vulnerability is due to improper validation of user-supplied input. An attacker could exploit this vulnerability by sending a crafted request to an affected device. A successful exploit could allow the attacker to modify data in the underlying database.

A vulnerability in the EIGRP implementation in Cisco Secure Firewall Adaptive Security Appliance (ASA) Software and Cisco Secure Firewall Threat Defense (FTD) Software could allow an unauthenticated, adjacent attacker to cause the device to reload unexpectedly, resulting in a denial of service (DoS) condition. This vulnerability is due to improper resource management when handling EIGRP update messages. An attacker could exploit this vulnerability by sending crafted EIGRP updates at a high rate to an affected device. A successful exploit could allow the attacker to trigger a memory leak that will eventually cause the affected device to reload unexpectedly.

A vulnerability in the system rate-limiting process for syslog message 419002 of Cisco Secure Firewall Adaptive Security Appliance (ASA) Software and Cisco Secure Firewall Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause high CPU utilization on an affected device, resulting in a denial of service (DoS) condition. This vulnerability is due to improper rate limiting for syslog message 419002. An attacker could exploit this vulnerability by sending a flood of TCP synchronization (SYN) packets to an affected device. A successful exploit could allow the attacker to cause high CPU utilization, resulting in performance degradation. 

A vulnerability in the TLS 1.3 implementation in Cisco Secure Firewall Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause an affected device to reload unexpectedly, resulting in a denial of service (DoS) condition. This vulnerability is due to improper buffer management during the TLS 1.3 connection. An attacker could exploit this vulnerability by sending a crafted TLS 1.3 packet to an affected system through a TLS 1.3-enabled listening socket. A successful exploit could allow the attacker to cause the LINA process to crash, which would cause the device to reload. The reload can happen before or after authentication of the connection.Note: TLS 1.3 connections include both data traffic and user-management traffic.

DD-WRT firmware, as deployed on TP-Link TL-WR740N v1 through v4 hardware, stores sensitive authentication credentials in cleartext within non-volatile memory. The exposed material includes SSH private keys, dynamic DNS passwords, email notification credentials and administrative passwords. An attacker with physical access to the device can extract these credentials from an SPI flash dump, leading to device compromise, infiltration of the connected network and unauthorised access to dependent third-party services.

HP has identified potential security vulnerabilities in the HP Advance software that may enable elevation of privilege, remote code execution, or arbitrary file write under certain conditions, impacting the HP Advance server hosting the software.

Apache NiFi Registry 0.4.0 through 2.11.0 are subject to path manipulation when storing extension bundle content using group, artifact, and version coordinates from uploaded NAR manifests. The default file persistence provider used coordinates as filesystem path components without rejected parent-directory names, and the path-containment check compared an unnormalized resolved path. An authenticated user authorized to write and delete bundles in a bucket can upload a NAR with a crafted manifest resulting in file system operations outside of the file persistence directory. Upgrading to Apache NiFi Registry 2.12.0 is the recommended mitigation, which rejects parent-directory coordinates and requires a normalized path to remain a strict child of the storage root location.

Tanium addressed a SQL injection vulnerability in Threat Response.

Tanium addressed a SQL injection vulnerability in Asset.

Tanium addressed a SQL injection vulnerability in Asset.

Improper validation of pod identifier uniqueness in aws-network-policy-agent in Amazon EKS Network Policy Agent before v1.4.0 might allow an authenticated remote user to bypass NetworkPolicy enforcement on co-located pods in other namespaces via crafted pod and namespace names that produce pod identifier collisions. To remediate this issue, users should upgrade to Amazon EKS Network Policy Agent 1.4.0 or later and Amazon VPC CNI Managed Add-on v1.22.4 or later (which includes Network Policy Agent v1.4.0).

Apache NiFi 2.11.0 supports migrating the contents of a version-controlled Process Group into a Connector using REST API methods that list eligible migration sources and submit migration requests. The framework authorized both methods against the target Connector alone, without evaluating access to the Process Groups involved. The absence of Process Group authorization allowed an authenticated user with read access to a Connector to enumerate the identifiers, names, and flow registry details of version-controlled Process Groups outside the scope of granted read policies. It also allowed a user with write access to a Connector to migrate a Process Group without write access to that Process Group, copying the flow definition, referenced assets, and component state into the Connector, and leaving the source Process Group disabled and renamed. Migration excludes sensitive property values and requires the source Process Group to be stopped with empty queues, which limits the scope of exposure. Apache NiFi installations that do not implement component-level authorization policies for Process Groups are not subject to this vulnerability, because the framework enforces Connector write permissions as the security boundary. Upgrading to Apache NiFi 2.12.0 is the recommended mitigation, which filters migration sources to Process Groups the requesting user is authorized to read, and requires write access to the source Process Group when submitting a migration request.

A remote attacker could cause excessive resource consumption by supplying specially crafted request parameters, potentially resulting in a denial of service condition. Older unsupported versions may also be affected. Users are recommended to upgrade to versions 2.3.12, 2.3-next-M9, 3.0.4, 4.0.4, or 4.1.4, which fix this issue.

Apache NiFi 2.11.0 disabled support for gzip-encoded HTTP requests for the application REST API and rejected requests that included the standard Content-Encoding header indicating gzip encoding. The framework enforcement filter did not check multiple instances of the Content-Encoding header and did not reject non-standard identifiers for gzip encoding, allowing a malicious client to send crafted requests that could consume excessive amounts of memory. Upgrading to Apache NiFi 2.12.0 is the recommended mitigation, which disables decompression of gzip-encoded HTTP requests regardless of header number or encoding identifiers.

As part of Cisco's ongoing commitment to proactive security and product quality, the Cisco Nexus Dashboard engineering team has conducted a comprehensive internal security review. This review resulted in a software hardening release that addresses multiple internally discovered vulnerabilities. The vulnerabilities tracked by CVE-2026-20361 are related to SQL injection issues that are grouped under the Common Weakness Enumeration (CWE) CWE-89.

SigNoz versions 0.88.0 through 0.141.0 fail to apply authorization wrappers to trace-funnel analytics endpoints in the HTTP handler. Unauthenticated attackers can submit arbitrary funnel definitions to retrieve trace analytics including identifiers, durations, span counts, service topology, and error activity without credentials.

Skipper is an HTTP router and reverse proxy for service composition. Prior to version 0.27.37, the opaAuthorizeRequestWithBody filter can authorize an oversized request after Skipper truncates the body presented to Open Policy Agent because the input.truncated_body signal is derived from Content-Length rather than the actual read result. In filters/openpolicyagent/openpolicyagent.go, ExtractHttpBodyOptionally truncates bodies at maxBodyBytes, while filters/openpolicyagent/internal/envoy/skipperadapter.go copies the request headers without adding a Content-Length value that reflects the truncation. For an HTTP/1.1 request using Transfer-Encoding: chunked or an HTTP/2 request without Content-Length, a body-inspecting policy that follows the prior mitigation and permits input.truncated_body equal to false can evaluate only the truncated prefix, allow the request, and then forward the full oversized body to the protected upstream. This residual issue is distinct from CVE-2026-50197. This issue is fixed in version 0.27.37.

CoreDNS is a DNS server written in Go. Prior to 1.14.7, the DNS-over-HTTPS, DNS-over-HTTP/3, DNS-over-QUIC, and DNS-over-gRPC listeners in plugin/pkg/doh/doh.go, core/dnsserver/server_quic.go, and core/dnsserver/server_grpc.go call dns.Msg.Unpack without the dns.DefaultMsgAcceptFunc request policy used by UDP, TCP, and DNS-over-TLS. An unauthenticated client can send an RFC 2136 UPDATE that the proxy or forward plugin passes unchanged to an update-capable upstream. If that upstream trusts CoreDNS's source address or connection and does not require an attacker-unknown end-to-end TSIG, the request appears to originate from CoreDNS and can add, replace, or delete DNS records, redirect traffic, take over names, alter mail routing, or disrupt the writable zone. This issue is fixed in version 1.14.7.

CoreDNS is a DNS server written in Go. Prior to 1.14.7, the DNS-over-HTTPS, DNS-over-HTTP/3, DNS-over-QUIC, and DNS-over-gRPC request paths in plugin/pkg/doh/doh.go, core/dnsserver/server_quic.go, and core/dnsserver/server_grpc.go call dns.Msg.Unpack on attacker-controlled DNS section counts before dns.DefaultMsgAcceptFunc validates the fixed header. An unauthenticated client can use DNS name compression and excessive section counts to amplify allocation before the plugin chain, so plugin-level rate limiting cannot prevent concurrent requests from exhausting memory and terminating CoreDNS. The ordinary UDP and TCP listeners are not affected because they validate the header first. This issue is fixed in version 1.14.7.

HAPI FHIR is a complete implementation of the HL7 FHIR standard for healthcare interoperability in Java. Prior to version 6.9.12, SHCParser in org.hl7.fhir.r5/src/main/java/org/hl7/fhir/r5/elementmodel/SHCParser.java can enter an infinite loop while processing attacker-controlled Smart Health Card JWT content whose header contains zip: "DEF" and whose raw-DEFLATE payload is empty or truncated. SHCParser.decodeJWT() reaches SHCParser.inflate(), where Inflater.inflate() can return zero while Inflater.finished() remains false and Inflater.needsInput() is true. The loop also lacks an Inflater.needsDictionary() termination check, SHCParser.decompress() contains the same zero-progress pattern, and ResourceChecker.java can reach SHC parsing during file-format detection. A malformed validation request can pin a JVM worker thread indefinitely, and concurrent requests can exhaust all validation workers. This issue is fixed in version 6.9.12.

HAPI FHIR is a complete implementation of the HL7 FHIR standard for healthcare interoperability in Java. Prior to version 6.9.12, SHCParser in org.hl7.fhir.r5/src/main/java/org/hl7/fhir/r5/elementmodel/SHCParser.java can consume attacker-controlled Smart Health Card JWT content whose header contains zip: "DEF" and whose small raw-DEFLATE payload expands to a very large value. SHCParser.decodeJWT() passes the decoded payload to SHCParser.inflate(), which accumulates all decompressed bytes in a ByteArrayOutputStream without an output-size limit before JSON parsing, and SHCParser.decompress() contains the same unbounded pattern. An application or validator service that accepts attacker-supplied SHC content can therefore suffer excessive heap allocation, severe garbage-collection pressure, request failure, process instability, or process termination. This issue is fixed in version 6.9.12.

An issue in Howyar Technologies Inc SysReturn Versions prior to 11.3.034 and fixed in v.11.3.0.34 allows a local attcker to execute arbitrary code via the BOOTia32.efi and a crafted cloak32.dat file on the ESP.

The RabbitMQ Java client library allows Java and JVM-based applications to connect to and interact with RabbitMQ nodes. Prior to 5.34.0, AMQConnection.start() applies Math.min(maxInboundMessageBodySize, frameMax) after Connection.Tune negotiation even though AMQP defines frameMax value zero as unlimited and ConnectionFactory.DEFAULT_FRAME_MAX is zero. When the client default and server-negotiated value are both zero, the result is passed to Utils.framePayloadLimit(int), which interprets zero as Integer.MAX_VALUE and disables the configured maxInboundMessageBodySize cap. A malicious AMQP server, or a man-in-the-middle attacker able to modify Connection.Tune and inject frames into the connection, can then send an oversized frame of any frame type, causing Frame.readFrom() to allocate a large byte array before content-level validation and potentially terminate the client process through memory exhaustion. This issue is fixed in version 5.34.0.

Redocly CLI makes OpenAPI validation, linting, and documentation workflows easier. Prior to version 2.33.0 of @redocly/respect-core and @redocly/cli, the respect command dynamically evaluates $faker runtime expressions in Arazzo descriptions. A crafted expression can traverse constructor, prototype, or __proto__ properties in packages/respect-core/src/modules/context-parser/get-value-from-context.ts, reach the JavaScript Function constructor, and execute arbitrary code when a user processes an untrusted description. The executed code runs with the privileges of the CLI process and can execute shell commands or read CI secrets. Users processing only trusted, self-authored workflows are not affected. This issue is fixed in @redocly/respect-core and @redocly/cli version 2.33.0.

Wire provides gRPC and protocol buffers for Android, Kotlin, Swift, and Java. Prior to 6.4.5 and 7.0.0-alpha04, Wire protobuf readers do not consistently validate attacker-controlled lengths against the current logical message boundary before advancing cursors, pointers, limits, slices, or allocations. In Kotlin, ProtoAdapter.decode(ByteArray) and ProtoAdapter.decode(ByteString) use ByteArrayProtoReader32.internalNextLengthDelimited(), where a positive oversized length can wrap pos + length to a negative limit and escape the existing negative-length check. Related ProtoReader, ReadBuffer.readVarint(), ReadBuffer.verifyAdditional(count:), packed-repeated, nested-message, and ProtoDecoder.decodeSizeDelimited(_:from:) paths can cross logical boundaries, perform pointer arithmetic, reserve capacity, or convert an unrepresentable size before proving the requested bytes exist. An attacker who supplies malformed protobuf bytes can cause unchecked exceptions, traps, out-of-bounds behavior, or excessive allocation, resulting in denial of service without known confidentiality, integrity, or code-execution impact. This issue is fixed in versions 6.4.5 and 7.0.0-alpha04.

Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine. Starting in version 8.0.0 and prior to version 8.0.5, Suricata's IP defragmentation code could deadlock when processing fragmented traffic containing an encapsulated tunnel protocol whose payload is itself fragmented. Version 8.0.5 contains a fix. No known workarounds are available.

A Null Pointer Dereference in the mk_sched_event_close function (mk_server/mk_scheduler.c) of Monkey through commit 4fb0c16 allows attackers to cause a Denial of Service (DoS) via sending a crafted HTTP request to the server.

Quickwit through 0.9.0 fails to validate the host and scheme of the queue_url parameter in SQS file sources, allowing attackers to make the node issue requests to arbitrary internal addresses. Attackers can supply a malicious queue_url to the create-source API to scan internal networks and fingerprint services based on connection response differences.