CVE Database
Synced from NVD, cross-referenced against CISA KEV and EPSS · ordered by last update
| CVE ID | Score | Description |
|---|---|---|
| Exploit 2mo ago | 5.5 | Wasmtime is an open source runtime for WebAssembly. Wasmtime's implementation of WebAssembly tail calls combined with stack traces can result in a runtime crash in certain WebAssembly modules. The runtime crash may be undefined behavior if Wasmtime was compiled with Rust 1.80 or prior. The runtime crash is a deterministic process abort when Wasmtime is compiled with Rust 1.81 and later. WebAssembly tail calls are a proposal which relatively recently reached stage 4 in the standardization process. Wasmtime first enabled support for tail calls by default in Wasmtime 21.0.0, although that release contained a bug where it was only on-by-default for some configurations. In Wasmtime 22.0.0 tail calls were enabled by default for all configurations. The specific crash happens when an exported function in a WebAssembly module (or component) performs a `return_call` (or `return_call_indirect` or `return_call_ref`) to an imported host function which captures a stack trace (for example, the host function raises a trap). In this situation, the stack-walking code previously assumed there was always at least one WebAssembly frame on the stack but with tail calls that is no longer true. With the tail-call proposal it's possible to have an entry trampoline appear as if it directly called the exit trampoline. This situation triggers an internal assert in the stack-walking code which raises a Rust `panic!()`. When Wasmtime is compiled with Rust versions 1.80 and prior this means that an `extern "C"` function in Rust is raising a `panic!()`. This is technically undefined behavior and typically manifests as a process abort when the unwinder fails to unwind Cranelift-generated frames. When Wasmtime is compiled with Rust versions 1.81 and later this panic becomes a deterministic process abort. Overall the impact of this issue is that this is a denial-of-service vector where a malicious WebAssembly module or component can cause the host to crash. There is no other impact at this time other than availability of a service as the result of the crash is always a crash and no more. This issue was discovered by routine fuzzing performed by the Wasmtime project via Google's OSS-Fuzz infrastructure. We have no evidence that it has ever been exploited by an attacker in the wild. All versions of Wasmtime which have tail calls enabled by default have been patched: * 21.0.x - patched in 21.0.2 * 22.0.x - patched in 22.0.1 * 23.0.x - patched in 23.0.3 * 24.0.x - patched in 24.0.1 * 25.0.x - patched in 25.0.2. Wasmtime versions from 12.0.x (the first release with experimental tail call support) to 20.0.x (the last release with tail-calls off-by-default) have support for tail calls but the support is disabled by default. These versions are not affected in their default configurations, but users who explicitly enabled tail call support will need to either disable tail call support or upgrade to a patched version of Wasmtime. The main workaround for this issue is to disable tail support for tail calls in Wasmtime, for example with `Config::wasm_tail_call(false)`. Users are otherwise encouraged to upgrade to patched versions. |
| 2mo ago | 4.7 | A privilege escalation (PE) vulnerability in the XML API of Palo Alto Networks PAN-OS software enables an authenticated PAN-OS administrator with restricted privileges to use a compromised XML API key to perform actions as a higher privileged PAN-OS administrator. For example, an administrator with "Virtual system administrator (read-only)" access could use an XML API key of a "Virtual system administrator" to perform write operations on the virtual system configuration even though they should be limited to read-only operations. |
| 2mo ago | 5.5 | A problem with a detection mechanism in the Palo Alto Networks Cortex XDR agent on Windows devices enables a user with Windows non-administrative privileges to disable the agent. This issue may be leveraged by malware to disable the Cortex XDR agent and then to perform malicious activity. |
| 2mo ago | 6.1 | A reflected XSS vulnerability in Palo Alto Networks Expedition enables execution of malicious JavaScript in the context of an authenticated Expedition user's browser if that user clicks on a malicious link, allowing phishing attacks that could lead to Expedition browser session theft. |
| 2mo ago | 6.5 | A cleartext storage of sensitive information vulnerability in Palo Alto Networks Expedition allows an authenticated attacker to reveal firewall usernames, passwords, and API keys generated using those credentials. |
| 2mo ago | 6.5 | An OS command injection vulnerability in Palo Alto Networks Expedition allows an authenticated attacker to run arbitrary OS commands as root in Expedition, resulting in disclosure of usernames, cleartext passwords, device configurations, and device API keys of PAN-OS firewalls. |
| Exploit 2mo ago | 4.3 | Lack of access control in ChallengeSolves (/api/v1/challenges/<challenge id>/solves) of CTFd v2.0.0 - v3.7.2 allows authenticated users to retrieve a list of users who have solved the challenge, regardless of the Account Visibility settings. The issue is fixed in v3.7.3+. |
| 2mo ago | 5.3 | A vulnerability was found in 3Scale. There is no auth mechanism to see a PDF invoice of a Developer user if the URL is known. Anyone can see the invoice if the URL is known or guessed. |
| 2mo ago | 5.5 | In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mvm: pause TCM when the firmware is stopped Not doing so will make us send a host command to the transport while the firmware is not alive, which will trigger a WARNING. bad state = 0 WARNING: CPU: 2 PID: 17434 at drivers/net/wireless/intel/iwlwifi/iwl-trans.c:115 iwl_trans_send_cmd+0x1cb/0x1e0 [iwlwifi] RIP: 0010:iwl_trans_send_cmd+0x1cb/0x1e0 [iwlwifi] Call Trace: <TASK> iwl_mvm_send_cmd+0x40/0xc0 [iwlmvm] iwl_mvm_config_scan+0x198/0x260 [iwlmvm] iwl_mvm_recalc_tcm+0x730/0x11d0 [iwlmvm] iwl_mvm_tcm_work+0x1d/0x30 [iwlmvm] process_one_work+0x29e/0x640 worker_thread+0x2df/0x690 ? rescuer_thread+0x540/0x540 kthread+0x192/0x1e0 ? set_kthread_struct+0x90/0x90 ret_from_fork+0x22/0x30 |
| 2mo ago | 5.5 | In the Linux kernel, the following vulnerability has been resolved: USB: usbtmc: prevent kernel-usb-infoleak The syzbot reported a kernel-usb-infoleak in usbtmc_write, we need to clear the structure before filling fields. |
| 2mo ago | 5.5 | In the Linux kernel, the following vulnerability has been resolved: nilfs2: fix state management in error path of log writing function After commit a694291a6211 ("nilfs2: separate wait function from nilfs_segctor_write") was applied, the log writing function nilfs_segctor_do_construct() was able to issue I/O requests continuously even if user data blocks were split into multiple logs across segments, but two potential flaws were introduced in its error handling. First, if nilfs_segctor_begin_construction() fails while creating the second or subsequent logs, the log writing function returns without calling nilfs_segctor_abort_construction(), so the writeback flag set on pages/folios will remain uncleared. This causes page cache operations to hang waiting for the writeback flag. For example, truncate_inode_pages_final(), which is called via nilfs_evict_inode() when an inode is evicted from memory, will hang. Second, the NILFS_I_COLLECTED flag set on normal inodes remain uncleared. As a result, if the next log write involves checkpoint creation, that's fine, but if a partial log write is performed that does not, inodes with NILFS_I_COLLECTED set are erroneously removed from the "sc_dirty_files" list, and their data and b-tree blocks may not be written to the device, corrupting the block mapping. Fix these issues by uniformly calling nilfs_segctor_abort_construction() on failure of each step in the loop in nilfs_segctor_do_construct(), having it clean up logs and segment usages according to progress, and correcting the conditions for calling nilfs_redirty_inodes() to ensure that the NILFS_I_COLLECTED flag is cleared. |
| 2mo ago | 4.7 | In the Linux kernel, the following vulnerability has been resolved: lib/generic-radix-tree.c: Fix rare race in __genradix_ptr_alloc() If we need to increase the tree depth, allocate a new node, and then race with another thread that increased the tree depth before us, we'll still have a preallocated node that might be used later. If we then use that node for a new non-root node, it'll still have a pointer to the old root instead of being zeroed - fix this by zeroing it in the cmpxchg failure path. |
| 2mo ago | 5.5 | In the Linux kernel, the following vulnerability has been resolved: PCI: keystone: Add workaround for Errata #i2037 (AM65x SR 1.0) Errata #i2037 in AM65x/DRA80xM Processors Silicon Revision 1.0 (SPRZ452D_July 2018_Revised December 2019 [1]) mentions when an inbound PCIe TLP spans more than two internal AXI 128-byte bursts, the bus may corrupt the packet payload and the corrupt data may cause associated applications or the processor to hang. The workaround for Errata #i2037 is to limit the maximum read request size and maximum payload size to 128 bytes. Add workaround for Errata #i2037 here. The errata and workaround is applicable only to AM65x SR 1.0 and later versions of the silicon will have this fixed. [1] -> https://www.ti.com/lit/er/sprz452i/sprz452i.pdf |
| 2mo ago | 5.5 | In the Linux kernel, the following vulnerability has been resolved: scsi: pm80xx: Set phy->enable_completion only when we wait for it pm8001_phy_control() populates the enable_completion pointer with a stack address, sends a PHY_LINK_RESET / PHY_HARD_RESET, waits 300 ms, and returns. The problem arises when a phy control response comes late. After 300 ms the pm8001_phy_control() function returns and the passed enable_completion stack address is no longer valid. Late phy control response invokes complete() on a dangling enable_completion pointer which leads to a kernel crash. |
| 2mo ago | 5.5 | In the Linux kernel, the following vulnerability has been resolved: i3c: mipi-i3c-hci: Error out instead on BUG_ON() in IBI DMA setup Definitely condition dma_get_cache_alignment * defined value > 256 during driver initialization is not reason to BUG_ON(). Turn that to graceful error out with -EINVAL. |
| 2mo ago | 5.5 | In the Linux kernel, the following vulnerability has been resolved: spi: hisi-kunpeng: Add verification for the max_frequency provided by the firmware If the value of max_speed_hz is 0, it may cause a division by zero error in hisi_calc_effective_speed(). The value of max_speed_hz is provided by firmware. Firmware is generally considered as a trusted domain. However, as division by zero errors can cause system failure, for defense measure, the value of max_speed is validated here. So 0 is regarded as invalid and an error code is returned. |
| 2mo ago | 5.5 | In the Linux kernel, the following vulnerability has been resolved: staging: iio: frequency: ad9834: Validate frequency parameter value In ad9834_write_frequency() clk_get_rate() can return 0. In such case ad9834_calc_freqreg() call will lead to division by zero. Checking 'if (fout > (clk_freq / 2))' doesn't protect in case of 'fout' is 0. ad9834_write_frequency() is called from ad9834_write(), where fout is taken from text buffer, which can contain any value. Modify parameters checking. Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| 2mo ago | 5.5 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Remove register from DCN35 DMCUB diagnostic collection [Why] These registers should not be read from driver and triggering the security violation when DMCUB work times out and diagnostics are collected blocks Z8 entry. [How] Remove the register read from DCN35. |
| 2mo ago | 5.5 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Avoid overflow from uint32_t to uint8_t [WHAT & HOW] dmub_rb_cmd's ramping_boundary has size of uint8_t and it is assigned 0xFFFF. Fix it by changing it to uint8_t with value of 0xFF. This fixes 2 INTEGER_OVERFLOW issues reported by Coverity. |
| 2mo ago | 4.7 | In the Linux kernel, the following vulnerability has been resolved: fsnotify: clear PARENT_WATCHED flags lazily In some setups directories can have many (usually negative) dentries. Hence __fsnotify_update_child_dentry_flags() function can take a significant amount of time. Since the bulk of this function happens under inode->i_lock this causes a significant contention on the lock when we remove the watch from the directory as the __fsnotify_update_child_dentry_flags() call from fsnotify_recalc_mask() races with __fsnotify_update_child_dentry_flags() calls from __fsnotify_parent() happening on children. This can lead upto softlockup reports reported by users. Fix the problem by calling fsnotify_update_children_dentry_flags() to set PARENT_WATCHED flags only when parent starts watching children. When parent stops watching children, clear false positive PARENT_WATCHED flags lazily in __fsnotify_parent() for each accessed child. |
| 2mo ago | 5.5 | In the Linux kernel, the following vulnerability has been resolved: crypto: stm32/cryp - call finalize with bh disabled The finalize operation in interrupt mode produce a produces a spinlock recursion warning. The reason is the fact that BH must be disabled during this process. |
| 2mo ago | 4.7 | In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Disable DMCUB timeout for DCN35 [Why] DMCUB can intermittently take longer than expected to process commands. Old ASIC policy was to continue while logging a diagnostic error - which works fine for ASIC without IPS, but with IPS this could lead to a race condition where we attempt to access DCN state while it's inaccessible, leading to a system hang when the NIU port is not disabled or register accesses that timeout and the display configuration in an undefined state. [How] We need to investigate why these accesses take longer than expected, but for now we should disable the timeout on DCN35 to avoid this race condition. Since the waits happen only at lower interrupt levels the risk of taking too long at higher IRQ and causing a system watchdog timeout are minimal. |
| Exploit 2mo ago | 5.4 | PHPGurukul Hospital Management System 4.0 is vulnerable to Cross Site Scripting (XSS) via the patname, pataddress, and medhis parameters in doctor/add-patient.php and doctor/edit-patient.php. |
| Exploit 2mo ago | 5.5 | Animate versions 23.0.7, 24.0.4 and earlier are affected by an out-of-bounds read vulnerability that could lead to disclosure of sensitive memory. An attacker could leverage this vulnerability to bypass mitigations such as ASLR. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| Exploit 2mo ago | 5.5 | Animate versions 23.0.7, 24.0.4 and earlier are affected by an out-of-bounds read vulnerability that could lead to disclosure of sensitive memory. An attacker could leverage this vulnerability to bypass mitigations such as ASLR. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| Exploit 2mo ago | 5.5 | Lightroom Desktop versions 7.4.1, 13.5, 12.5.1 and earlier are affected by an out-of-bounds read vulnerability that could lead to disclosure of sensitive memory. An attacker could leverage this vulnerability to bypass mitigations such as ASLR. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| Exploit 2mo ago | 5.5 | Substance3D - Painter versions 10.0.1 and earlier are affected by an out-of-bounds read vulnerability that could lead to disclosure of sensitive memory. An attacker could leverage this vulnerability to bypass mitigations such as ASLR. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| 2mo ago | 6.4 | The Embed PDF Viewer plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'height' and 'width' parameters in all versions up to, and including, 2.4.4 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with Contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. |
| 2mo ago | 6.4 | The Auto iFrame plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'tag' parameter in all versions up to, and including, 1.7 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with Author-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. |
| 2mo ago | 6.2 | In DRM service, there is a possible system crash due to null pointer dereference. This could lead to local denial of service with System execution privileges needed. |