CVE Database

In the Linux kernel, the following vulnerability has been resolved: ipvs: skip ipv6 extension headers for csum checks Protocol checksum validation fails for IPv6 if there are extension headers before the protocol header. iph->len already contains its offset, so use it to fix the problem.

In the Linux kernel, the following vulnerability has been resolved: net: mscc: ocelot: add missing lock protection in ocelot_port_xmit_inj() ocelot_port_xmit_inj() calls ocelot_can_inject() and ocelot_port_inject_frame() without holding the injection group lock. Both functions contain lockdep_assert_held() for the injection lock, and the correct caller felix_port_deferred_xmit() properly acquires the lock using ocelot_lock_inj_grp() before calling these functions. Add ocelot_lock_inj_grp()/ocelot_unlock_inj_grp() around the register injection path to fix the missing lock protection. The FDMA path is not affected as it uses its own locking mechanism.

In the Linux kernel, the following vulnerability has been resolved: apparmor: fix NULL sock in aa_sock_file_perm Deal with the potential that sock and sock-sk can be NULL during socket setup or teardown. This could lead to an oops. The fix for NULL pointer dereference in __unix_needs_revalidation shows this is at least possible for af_unix sockets. While the fix for af_unix sockets applies for newer mediation this is still the fall back path for older af_unix mediation and other sockets, so ensure it is covered.

In the Linux kernel, the following vulnerability has been resolved: net: remove WARN_ON_ONCE when accessing forward path array Although unlikely, recent support for IPIP tunnels increases chances of reaching this WARN_ON_ONCE if userspace manages to build a sufficiently long forward path. Remove it.

Improper Certificate Validation vulnerability in Erlang OTP public_key (pubkey_ocsp module) allows forged OCSP responses signed with an expired responder certificate to be accepted as valid. OCSP response verification in pubkey_ocsp:verify_response/5 and pubkey_ocsp:is_authorized_responder/3 in lib/public_key/src/pubkey_ocsp.erl does not check the validity period (notBefore/notAfter) of the OCSP responder certificate. An attacker who has obtained the private key of an expired CA-designated OCSP responder certificate can forge OCSP responses that Erlang/OTP accepts as valid. This affects TLS clients using OCSP stapling via the ssl application: a malicious or compromised server can present a revoked TLS certificate together with a forged OCSP response signed by an expired responder key, and the client will accept the revoked certificate as valid. It also affects applications calling public_key:pkix_ocsp_validate/5 directly, where the impact depends on the use case — server-side client certificate validation using this API may allow authentication bypass with a revoked client certificate. This issue affects OTP from OTP 27.0 before OTP 29.0.1, OTP 28.5.0.1 and OTP 27.3.4.12, corresponding to public_key from 1.16 before 1.21.1, 1.20.3.1 and 1.17.1.3.

Improper Following of a Certificate's Chain of Trust vulnerability in Erlang OTP public_key (pubkey_cert module) allows a non-CA certificate to be accepted as an intermediate issuer, enabling certificate chain forgery. In lib/public_key/src/pubkey_cert.erl, pubkey_cert:validate_extensions/7 contains two flaws that together allow a certificate with basicConstraints cA:false and no keyUsage extension to be used as an intermediate issuer in a chain passed to public_key:pkix_path_validation/3: the cA:false clause recurses into the remaining extensions without rejecting the certificate when it is in issuer position, and the keyUsage check only fires when the extension is present, so a certificate lacking keyUsage entirely bypasses the keyCertSign enforcement. Any party holding an end-entity certificate with basicConstraints cA:false and no keyUsage extension, issued by any CA in the victim's trust store, can use that certificate's private key to sign forged leaf certificates for arbitrary identities. public_key:pkix_path_validation/3 accepts the resulting chain, and by extension every TLS or mTLS endpoint built on the OTP ssl application that relies on the default verifier is affected, including server identity verification on the client side and client certificate verification on mTLS servers. This issue affects OTP from OTP 17.0 before OTP 29.0.1, OTP 28.5.0.1, OTP 27.3.4.12 and OTP 26.2.5.21, corresponding to public_key from 0.22 before 1.21.1, 1.20.3.1, 1.17.1.3 and 1.15.1.7.

IBM Cloud APM, Base Private 8.1.4 and IBM Cloud APM, Advanced Private 8.1.4 IBM Db2 for Linux, UNIX and Windows (includes DB2 Connect Server) could allow an authenticated user to cause a denial of service due to improper neutralization of special elements in the data query logic of the Fenced environment.

IBM Netezza Performance Server Replication Services 3.0.2.0 through 3.0.5.0 allows an attacker with low‑privileged access to escalate their privileges to root. By exploiting this flaw, the attacker can execute root‑level commands, obtain a root shell, and change the root user’s password. Successful exploitation also enables modification or removal of system‑wide files and the installation of persistent backdoors. This results in full system compromise with complete loss of confidentiality, integrity, and availability.

IBM InfoSphere Optim Test Data Fabrication 1.0.0, 1.0.0.1, 1.0.0.2, 1.0.2, 1.0.2.2, 1.0.2.3, 1.0.2.4, 1.0.2.5, 1.0.2.6, 1.0.2.7 could allow a remote attacker to traverse directories on the system. An attacker could send a specially crafted URL request containing "dot dot" sequences (/../) to view arbitrary files on the system

An issue in fetch_jpg() in xdrv_10_scripter.ino in Tasmota through 15.3.0.3 allows a remote attacker to cause heap buffer overflow. The Content-Length from a JPEG stream is stored in a uint16_t variable; values above 65535 wrap around, causing allocation of a smaller buffer than the data actually read.

Buffer Overflow vulnerability in arendst Tasmota v.15.3.0.3 and before allows a remote attacker to execute arbitrary code via the xdrv_10_scripter.ino, fetch_jpg(), jpg_task.boundary[40], strcpy() function.

Buffer Overflow vulnerability in arendst Tasmota v.15.3.0.3 and before allows a remote attacker to execute arbitrary code via the tasmota/tasmota_xdrv_driver/xdrv_10_scripter.ino, fetch_jpg() function.

Netis AC1200 Router NC21 V4.0.1.4296 is vulnerable to unauthenticated command injection via the /cgi-bin/skk_set.cgi endpoint. The password and new_pwd_confirm POST parameters are passed directly to the underlying OS shell without sanitization. An attacker can inject arbitrary shell commands by wrapping them in backticks (`) and encoding them in base64. Because the endpoint requires no authentication, any device on the LAN can achieve full Remote Code Execution on the router's operating system with a single HTTP POST request.

Netis AC1200 Router NC21 V4.0.1.4296 exposes a CGI endpoint /cgi-bin/skk_get.cgi that returns the entire router configuration as a JSON response with no authentication required. Any attacker on the LAN can send a single HTTP GET request and instantly retrieve administrator credentials, WiFi passwords, PPPoE credentials, DDNS credentials, and a full map of all connected devices.

Netis AC1200 Router NC21 V4.0.1.4296 contains a hard-coded root credential stored in /etc/shadow.sample. The password for the root account is set to the trivially weak value root, allowing an attacker with access to the device to authenticate as root and gain full control of the underlying operating system.

picoclaw <=v0.1.2 and earlier is vulnerable to OS command injection via the ExecTool component (pkg/tools/shell.go). The guardCommand() function attempts to restrict shell command execution using a denylist of 8 regular expressions, but the denylist is incomplete.

@pensar/apex <= 0.0.58 is vulnerable to OS command injection via the smart_enumerate tool. The createSmartEnumerateTool() function in src/core/agent/tools.ts constructs a shell command by concatenating unsanitized values from the extensions array and url parameter into a string passed to Node.js child_process.exec(). Because exec() spawns a shell, shell metacharacters in those values are interpreted by the host shell, resulting in arbitrary OS command execution with the privileges of the running process. NOTE: this is disputed by the Supplier because the report is about intended behavior, as explained in the Security Policy of the pensarai/apex GitHub repo.

In Slican telephone exchanges it is possible to manage the control panel remotely. An unauthenticated attacker can connect to the modem via a telephone with a specific caller ID. This allows them to bypass admin authentication and gain full access to the service protocol and configuration panel. This vulnerability is independent of the telephone exchanges configuration. If remote access is disabled, calling with this caller ID will temporarily enable it. This issue was fixed in versions below: - IPL-256: version 6.61.0040 - IPM-032: version 6.61.0040 - CCT-1668: version 6.56.0430 - MAC-6400: version 6.56.0430 - CXS-0424: version 6.30.0510 The issue STILL EXISTS in End-Of-Life telephone exchanges in versions 4.xx and below: - CCT-1668 (CCT1CPU) - MAC-6400 - CXS-0424 These products were discontinued in 2011 and 2012 and and will not receive updates. These products require a hardware update in order to receive a software update. The vendor recommends that users of these devices contact the their service department directly to determine the options for upgrading.

In Slican telephone exchanges secure key is generated in a predictable manner using properties of the telephone exchange which can be obtained without authentication. An unauthenticated attacker can deduce the secure key and obtain admin credentials. This issue was fixed in versions below: - IPx series: version 6.61.0040 - CCT-1668: version 6.56.0430 - MAC-6400: version 6.56.0430 - CXS-0424: version 6.30.0510 The issue STILL EXISTS in End-Of-Life telephone exchanges in versions 4.xx and below: - CCT-1668 (CCT1CPU) - MAC-6400 - CXS-0424 These products were discontinued in 2011 and 2012 and and will not receive updates. These products require a hardware update in order to receive a software update. The vendor recommends that users of these devices contact the their service department directly to determine the options for upgrading.

Slican telephone exchanges allow administrative protocol authentication bypass. An attacker can bypass the need to enter login credentials by executing the appropriate command. This issue was fixed in versions below: - NCP: version 1.24.0250 - IPx series: version 6.61.0040 - CCT-1668: version 6.56.0430 - MAC-6400: version 6.56.0430 - CXS-0424: version 6.30.0510 The issue STILL EXISTS in End-Of-Life telephone exchanges in versions 4.xx and below: - CCT-1668 (CCT1CPU) - MAC-6400 - CXS-0424 These products were discontinued in 2011 and 2012 and and will not receive updates. These products require a hardware update in order to receive a software update. The vendor recommends that users of these devices contact the their service department directly to determine the options for upgrading.

IBM MQ Operator SC2: v3.2.0 through 3.2.23CD:  v3.3.0, v3.4.0, v3.4.1, v3.5.0, v3.5.1 - v3.5.3, v3.6.0 - v3.6.4, v3.7.0 - v3.7.2, v3.8.0, v3.8.1, v3.9.0, v3.9.1LTS: v2.0.0 - 2.0.29 and IBM supplied MQ Advanced container images SC2: 9.4.0.6 through r1, 9.4.0.6-r2, 9.4.0.7-r1, 9.4.0.10-r1, 9.4.0.10-r2, 9.4.0.11-r1, 9.4.0.11-r2, 9.4.0.11-r3, 9.4.0.12-r1, 9.4.0.15-r1 - 9.4.0.15-r4, 9.4.0.16-r1, 9.4.0.16-r2, 9.4.0.17-r1, 9.4.0.17-r2, 9.4.0.20-r1CD: 9.4.1.0-r1, 9.4.1.0-r2, 9.4.1.1-r1, 9.4.2.0-r1, 9.4.2.0-r2, 9.4.2.1-r1, 9.4.2.1-r2, 9.4.3.0-r1, 9.4.3.0-r2, 9.4.3.1-r1 - 9.4.3.1-r3, 9.4.4.0-r1 - 9.4.4.0-r4, 9.4.4.1-r1, 9.4.5.0-r1, 9.4.5.0-r2LTS: 9.3.0.0-r1, 9.3.0.0-r2, 9.3.0.0-r3, 9.3.0.1-r1, 9.3.0.1-r2, 9.3.0.1-r3, 9.3.0.1-r4, 9.3.0.3-r1, 9.3.0.4-r1, 9.3.0.4-r2, 9.3.0.5-r1, 9.3.0.5-r2, 9.3.0.5-r3, 9.3.0.6-r1, 9.3.0.10-r1, 9.3.0.10-r2, 9.3.0.11-r1,9.3.0.11-r2, 9.3.0.15-r1, 9.3.0.16-r1, 9.3.0.16-r2, 9.3.0.17-r1, 9.3.0.17-r2, 9.3.0.17-r3, 9.3.0.20-r1, 9.3.0.20-r2, 9.3.0.21-r1, 9.3.0.21-r2, 9.3.0.21-r3, 9.3.0.25-r1, 9.4.0.0-r1, 9.4.0.0-r2, 9.4.0.0-r3, 9.4.0.5-r1, 9.4.0.5-r2 IBM MQ stores potentially sensitive information in log files that could be read by a local user.

A flaw was found in Samba’s vfs_worm module. The module is intended to provide write-once, read-many (WORM) protections by preventing modification of files after a configurable grace period. Due to insufficient validation during rename operations, an authenticated user with write access to a share could overwrite a protected file by renaming a newly created file over the existing WORM-protected file.

libusb before version 1.0.30 contains a NULL pointer dereference vulnerability that allows attackers to crash applications by supplying a malformed USB configuration descriptor where an interface claims bNumEndpoints greater than zero but is followed by a class-specific descriptor whose bLength exceeds the remaining buffer size, causing parse_interface() to return early without allocating the endpoint array. Attackers can exploit this flaw through libusb_get_active_config_descriptor or libusb_get_config_descriptor by providing crafted descriptors via virtualized USB passthrough, file-based descriptor parsing, or network sources, causing any application iterating over endpoints to dereference a NULL endpoint pointer and crash.

A flaw was found in Samba’s handling of NTFS-style reparse points on shares configured with read only = yes. Due to missing SMB-layer access checks, authenticated users with underlying filesystem write permissions may create or delete reparse point metadata through SMB operations even on read-only exports. This could allow modification of SMB-visible file behavior, including converting files into symbolic links or other reparse point types.

IBM Db2 11.5.0 through 11.5.9, and 12.1.0 through 12.1.4 is vulnerable to a denial of service with a specially crafted query when autonomous transactions are enabled.

In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: fix ntfs_mount_options leak in ntfs_fill_super() In ntfs_fill_super(), the fc->fs_private pointer is set to NULL without first freeing the memory it points to. This causes the subsequent call to ntfs_fs_free() to skip freeing the ntfs_mount_options structure. This results in a kmemleak report: unreferenced object 0xff1100015378b800 (size 32): comm "mount", pid 582, jiffies 4294890685 hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 ed ff ed ff 00 04 00 00 ................ backtrace (crc ed541d8c): __kmalloc_cache_noprof+0x424/0x5a0 __ntfs_init_fs_context+0x47/0x590 alloc_fs_context+0x5d8/0x960 __x64_sys_fsopen+0xb1/0x190 do_syscall_64+0x50/0x1f0 entry_SYSCALL_64_after_hwframe+0x76/0x7e This issue can be reproduced using the following commands: fallocate -l 100M test.file mount test.file /tmp/test Since sbi->options is duplicated from fc->fs_private and does not directly use the memory allocated for fs_private, it is unnecessary to set fc->fs_private to NULL. Additionally, this patch simplifies the code by utilizing the helper function put_mount_options() instead of open-coding the cleanup logic.

In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: Initialize new folios before use KMSAN reports an uninitialized value in longest_match_std(), invoked from ntfs_compress_write(). When new folios are allocated without being marked uptodate and ni_read_frame() is skipped because the caller expects the frame to be completely overwritten, some reserved folios may remain only partially filled, leaving the rest memory uninitialized.

In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: fix deadlock in ni_read_folio_cmpr Syzbot reported a task hung in ni_readpage_cmpr (now ni_read_folio_cmpr). This is caused by a lock inversion deadlock involving the inode mutex (ni_lock) and page locks. Scenario: 1. Task A enters ntfs_read_folio() for page X. It acquires ni_lock. 2. Task A calls ni_read_folio_cmpr(), which attempts to lock all pages in the compressed frame (including page Y). 3. Concurrently, Task B (e.g., via readahead) has locked page Y and calls ntfs_read_folio(). 4. Task B waits for ni_lock (held by A). 5. Task A waits for page Y lock (held by B). -> DEADLOCK. The fix is to restructure locking: do not take ni_lock in ntfs_read_folio(). Instead, acquire ni_lock inside ni_read_folio_cmpr() ONLY AFTER all required page locks for the frame have been successfully acquired. This restores the correct lock ordering (Page Lock -> ni_lock) consistent with VFS. [almaz.alexandrovich@paragon-software.com: ni_readpage_cmpr was renamed to ni_read_folio_cmpr]

In the Linux kernel, the following vulnerability has been resolved: accel/amdxdna: Fix potential NULL pointer dereference in context cleanup aie_destroy_context() is invoked during error handling in aie2_create_context(). However, aie_destroy_context() assumes that the context's mailbox channel pointer is non-NULL. If mailbox channel creation fails, the pointer remains NULL and calling aie_destroy_context() can lead to a NULL pointer dereference. In aie2_create_context(), replace aie_destroy_context() with a function which request firmware to remove the context created previously.

In the Linux kernel, the following vulnerability has been resolved: drm/panthor: Fix NULL pointer dereference on panthor_fw_unplug This patch removes the MCU halt and wait for halt procedures during panthor_fw_unplug() as the MCU can be in a variety of states or the FW may not even be loaded/initialized at all, the latter of which can lead to a NULL pointer dereference. It should be safe on unplug to just disable the MCU without waiting for it to halt as it may not be able to.