CVE Database

In the Linux kernel, the following vulnerability has been resolved: usb: usbtmc: Fix bug in pipe direction for control transfers The syzbot fuzzer reported a minor bug in the usbtmc driver: usb 5-1: BOGUS control dir, pipe 80001e80 doesn't match bRequestType 0 WARNING: CPU: 0 PID: 3813 at drivers/usb/core/urb.c:412 usb_submit_urb+0x13a5/0x1970 drivers/usb/core/urb.c:410 Modules linked in: CPU: 0 PID: 3813 Comm: syz-executor122 Not tainted 5.17.0-rc5-syzkaller-00306-g2293be58d6a1 #0 ... Call Trace: <TASK> usb_start_wait_urb+0x113/0x530 drivers/usb/core/message.c:58 usb_internal_control_msg drivers/usb/core/message.c:102 [inline] usb_control_msg+0x2a5/0x4b0 drivers/usb/core/message.c:153 usbtmc_ioctl_request drivers/usb/class/usbtmc.c:1947 [inline] The problem is that usbtmc_ioctl_request() uses usb_rcvctrlpipe() for all of its transfers, whether they are in or out. It's easy to fix.

In the Linux kernel, the following vulnerability has been resolved: NFSD: Fix the behavior of READ near OFFSET_MAX Dan Aloni reports: > Due to commit 8cfb9015280d ("NFS: Always provide aligned buffers to > the RPC read layers") on the client, a read of 0xfff is aligned up > to server rsize of 0x1000. > > As a result, in a test where the server has a file of size > 0x7fffffffffffffff, and the client tries to read from the offset > 0x7ffffffffffff000, the read causes loff_t overflow in the server > and it returns an NFS code of EINVAL to the client. The client as > a result indefinitely retries the request. The Linux NFS client does not handle NFS?ERR_INVAL, even though all NFS specifications permit servers to return that status code for a READ. Instead of NFS?ERR_INVAL, have out-of-range READ requests succeed and return a short result. Set the EOF flag in the result to prevent the client from retrying the READ request. This behavior appears to be consistent with Solaris NFS servers. Note that NFSv3 and NFSv4 use u64 offset values on the wire. These must be converted to loff_t internally before use -- an implicit type cast is not adequate for this purpose. Otherwise VFS checks against sb->s_maxbytes do not work properly.

In the Linux kernel, the following vulnerability has been resolved: usb: f_fs: Fix use-after-free for epfile Consider a case where ffs_func_eps_disable is called from ffs_func_disable as part of composition switch and at the same time ffs_epfile_release get called from userspace. ffs_epfile_release will free up the read buffer and call ffs_data_closed which in turn destroys ffs->epfiles and mark it as NULL. While this was happening the driver has already initialized the local epfile in ffs_func_eps_disable which is now freed and waiting to acquire the spinlock. Once spinlock is acquired the driver proceeds with the stale value of epfile and tries to free the already freed read buffer causing use-after-free. Following is the illustration of the race: CPU1 CPU2 ffs_func_eps_disable epfiles (local copy) ffs_epfile_release ffs_data_closed if (last file closed) ffs_data_reset ffs_data_clear ffs_epfiles_destroy spin_lock dereference epfiles Fix this races by taking epfiles local copy & assigning it under spinlock and if epfiles(local) is null then update it in ffs->epfiles then finally destroy it. Extending the scope further from the race, protecting the ep related structures, and concurrent accesses.

In the Linux kernel, the following vulnerability has been resolved: misc: fastrpc: avoid double fput() on failed usercopy If the copy back to userland fails for the FASTRPC_IOCTL_ALLOC_DMA_BUFF ioctl(), we shouldn't assume that 'buf->dmabuf' is still valid. In fact, dma_buf_fd() called fd_install() before, i.e. "consumed" one reference, leaving us with none. Calling dma_buf_put() will therefore put a reference we no longer own, leading to a valid file descritor table entry for an already released 'file' object which is a straight use-after-free. Simply avoid calling dma_buf_put() and rely on the process exit code to do the necessary cleanup, if needed, i.e. if the file descriptor is still valid.

In the Linux kernel, the following vulnerability has been resolved: phy: stm32: fix a refcount leak in stm32_usbphyc_pll_enable() This error path needs to decrement "usbphyc->n_pll_cons.counter" before returning.

In the Linux kernel, the following vulnerability has been resolved: net: usb: ax88179_178a: Fix out-of-bounds accesses in RX fixup ax88179_rx_fixup() contains several out-of-bounds accesses that can be triggered by a malicious (or defective) USB device, in particular: - The metadata array (hdr_off..hdr_off+2*pkt_cnt) can be out of bounds, causing OOB reads and (on big-endian systems) OOB endianness flips. - A packet can overlap the metadata array, causing a later OOB endianness flip to corrupt data used by a cloned SKB that has already been handed off into the network stack. - A packet SKB can be constructed whose tail is far beyond its end, causing out-of-bounds heap data to be considered part of the SKB's data. I have tested that this can be used by a malicious USB device to send a bogus ICMPv6 Echo Request and receive an ICMPv6 Echo Reply in response that contains random kernel heap data. It's probably also possible to get OOB writes from this on a little-endian system somehow - maybe by triggering skb_cow() via IP options processing -, but I haven't tested that.

In the Linux kernel, the following vulnerability has been resolved: iio: buffer: Fix file related error handling in IIO_BUFFER_GET_FD_IOCTL If we fail to copy the just created file descriptor to userland, we try to clean up by putting back 'fd' and freeing 'ib'. The code uses put_unused_fd() for the former which is wrong, as the file descriptor was already published by fd_install() which gets called internally by anon_inode_getfd(). This makes the error handling code leaving a half cleaned up file descriptor table around and a partially destructed 'file' object, allowing userland to play use-after-free tricks on us, by abusing the still usable fd and making the code operate on a dangling 'file->private_data' pointer. Instead of leaving the kernel in a partially corrupted state, don't attempt to explicitly clean up and leave this to the process exit path that'll release any still valid fds, including the one created by the previous call to anon_inode_getfd(). Simply return -EFAULT to indicate the error.

In the Linux kernel, the following vulnerability has been resolved: iommu: Fix potential use-after-free during probe Kasan has reported the following use after free on dev->iommu. when a device probe fails and it is in process of freeing dev->iommu in dev_iommu_free function, a deferred_probe_work_func runs in parallel and tries to access dev->iommu->fwspec in of_iommu_configure path thus causing use after free. BUG: KASAN: use-after-free in of_iommu_configure+0xb4/0x4a4 Read of size 8 at addr ffffff87a2f1acb8 by task kworker/u16:2/153 Workqueue: events_unbound deferred_probe_work_func Call trace: dump_backtrace+0x0/0x33c show_stack+0x18/0x24 dump_stack_lvl+0x16c/0x1e0 print_address_description+0x84/0x39c __kasan_report+0x184/0x308 kasan_report+0x50/0x78 __asan_load8+0xc0/0xc4 of_iommu_configure+0xb4/0x4a4 of_dma_configure_id+0x2fc/0x4d4 platform_dma_configure+0x40/0x5c really_probe+0x1b4/0xb74 driver_probe_device+0x11c/0x228 __device_attach_driver+0x14c/0x304 bus_for_each_drv+0x124/0x1b0 __device_attach+0x25c/0x334 device_initial_probe+0x24/0x34 bus_probe_device+0x78/0x134 deferred_probe_work_func+0x130/0x1a8 process_one_work+0x4c8/0x970 worker_thread+0x5c8/0xaec kthread+0x1f8/0x220 ret_from_fork+0x10/0x18 Allocated by task 1: ____kasan_kmalloc+0xd4/0x114 __kasan_kmalloc+0x10/0x1c kmem_cache_alloc_trace+0xe4/0x3d4 __iommu_probe_device+0x90/0x394 probe_iommu_group+0x70/0x9c bus_for_each_dev+0x11c/0x19c bus_iommu_probe+0xb8/0x7d4 bus_set_iommu+0xcc/0x13c arm_smmu_bus_init+0x44/0x130 [arm_smmu] arm_smmu_device_probe+0xb88/0xc54 [arm_smmu] platform_drv_probe+0xe4/0x13c really_probe+0x2c8/0xb74 driver_probe_device+0x11c/0x228 device_driver_attach+0xf0/0x16c __driver_attach+0x80/0x320 bus_for_each_dev+0x11c/0x19c driver_attach+0x38/0x48 bus_add_driver+0x1dc/0x3a4 driver_register+0x18c/0x244 __platform_driver_register+0x88/0x9c init_module+0x64/0xff4 [arm_smmu] do_one_initcall+0x17c/0x2f0 do_init_module+0xe8/0x378 load_module+0x3f80/0x4a40 __se_sys_finit_module+0x1a0/0x1e4 __arm64_sys_finit_module+0x44/0x58 el0_svc_common+0x100/0x264 do_el0_svc+0x38/0xa4 el0_svc+0x20/0x30 el0_sync_handler+0x68/0xac el0_sync+0x160/0x180 Freed by task 1: kasan_set_track+0x4c/0x84 kasan_set_free_info+0x28/0x4c ____kasan_slab_free+0x120/0x15c __kasan_slab_free+0x18/0x28 slab_free_freelist_hook+0x204/0x2fc kfree+0xfc/0x3a4 __iommu_probe_device+0x284/0x394 probe_iommu_group+0x70/0x9c bus_for_each_dev+0x11c/0x19c bus_iommu_probe+0xb8/0x7d4 bus_set_iommu+0xcc/0x13c arm_smmu_bus_init+0x44/0x130 [arm_smmu] arm_smmu_device_probe+0xb88/0xc54 [arm_smmu] platform_drv_probe+0xe4/0x13c really_probe+0x2c8/0xb74 driver_probe_device+0x11c/0x228 device_driver_attach+0xf0/0x16c __driver_attach+0x80/0x320 bus_for_each_dev+0x11c/0x19c driver_attach+0x38/0x48 bus_add_driver+0x1dc/0x3a4 driver_register+0x18c/0x244 __platform_driver_register+0x88/0x9c init_module+0x64/0xff4 [arm_smmu] do_one_initcall+0x17c/0x2f0 do_init_module+0xe8/0x378 load_module+0x3f80/0x4a40 __se_sys_finit_module+0x1a0/0x1e4 __arm64_sys_finit_module+0x44/0x58 el0_svc_common+0x100/0x264 do_el0_svc+0x38/0xa4 el0_svc+0x20/0x30 el0_sync_handler+0x68/0xac el0_sync+0x160/0x180 Fix this by setting dev->iommu to NULL first and then freeing dev_iommu structure in dev_iommu_free function.

In the Linux kernel, the following vulnerability has been resolved: scsi: pm8001: Fix use-after-free for aborted SSP/STP sas_task Currently a use-after-free may occur if a sas_task is aborted by the upper layer before we handle the I/O completion in mpi_ssp_completion() or mpi_sata_completion(). In this case, the following are the two steps in handling those I/O completions: - Call complete() to inform the upper layer handler of completion of the I/O. - Release driver resources associated with the sas_task in pm8001_ccb_task_free() call. When complete() is called, the upper layer may free the sas_task. As such, we should not touch the associated sas_task afterwards, but we do so in the pm8001_ccb_task_free() call. Fix by swapping the complete() and pm8001_ccb_task_free() calls ordering.

In the Linux kernel, the following vulnerability has been resolved: scsi: pm8001: Fix use-after-free for aborted TMF sas_task Currently a use-after-free may occur if a TMF sas_task is aborted before we handle the IO completion in mpi_ssp_completion(). The abort occurs due to timeout. When the timeout occurs, the SAS_TASK_STATE_ABORTED flag is set and the sas_task is freed in pm8001_exec_internal_tmf_task(). However, if the I/O completion occurs later, the I/O completion still thinks that the sas_task is available. Fix this by clearing the ccb->task if the TMF times out - the I/O completion handler does nothing if this pointer is cleared.

In the Linux kernel, the following vulnerability has been resolved: nvme: fix a possible use-after-free in controller reset during load Unlike .queue_rq, in .submit_async_event drivers may not check the ctrl readiness for AER submission. This may lead to a use-after-free condition that was observed with nvme-tcp. The race condition may happen in the following scenario: 1. driver executes its reset_ctrl_work 2. -> nvme_stop_ctrl - flushes ctrl async_event_work 3. ctrl sends AEN which is received by the host, which in turn schedules AEN handling 4. teardown admin queue (which releases the queue socket) 5. AEN processed, submits another AER, calling the driver to submit 6. driver attempts to send the cmd ==> use-after-free In order to fix that, add ctrl state check to validate the ctrl is actually able to accept the AER submission. This addresses the above race in controller resets because the driver during teardown should: 1. change ctrl state to RESETTING 2. flush async_event_work (as well as other async work elements) So after 1,2, any other AER command will find the ctrl state to be RESETTING and bail out without submitting the AER.

In the Linux kernel, the following vulnerability has been resolved: nvme-tcp: fix possible use-after-free in transport error_recovery work While nvme_tcp_submit_async_event_work is checking the ctrl and queue state before preparing the AER command and scheduling io_work, in order to fully prevent a race where this check is not reliable the error recovery work must flush async_event_work before continuing to destroy the admin queue after setting the ctrl state to RESETTING such that there is no race .submit_async_event and the error recovery handler itself changing the ctrl state.

In the Linux kernel, the following vulnerability has been resolved: nvme-rdma: fix possible use-after-free in transport error_recovery work While nvme_rdma_submit_async_event_work is checking the ctrl and queue state before preparing the AER command and scheduling io_work, in order to fully prevent a race where this check is not reliable the error recovery work must flush async_event_work before continuing to destroy the admin queue after setting the ctrl state to RESETTING such that there is no race .submit_async_event and the error recovery handler itself changing the ctrl state.

In the Linux kernel, the following vulnerability has been resolved: iwlwifi: fix use-after-free If no firmware was present at all (or, presumably, all of the firmware files failed to parse), we end up unbinding by calling device_release_driver(), which calls remove(), which then in iwlwifi calls iwl_drv_stop(), freeing the 'drv' struct. However the new code I added will still erroneously access it after it was freed. Set 'failure=false' in this case to avoid the access, all data was already freed anyway.

In the Linux kernel, the following vulnerability has been resolved: net: dsa: lantiq_gswip: fix use after free in gswip_remove() of_node_put(priv->ds->slave_mii_bus->dev.of_node) should be done before mdiobus_free(priv->ds->slave_mii_bus).

In the Linux kernel, the following vulnerability has been resolved: mctp: fix use after free Clang static analysis reports this problem route.c:425:4: warning: Use of memory after it is freed trace_mctp_key_acquire(key); ^~~~~~~~~~~~~~~~~~~~~~~~~~~ When mctp_key_add() fails, key is freed but then is later used in trace_mctp_key_acquire(). Add an else statement to use the key only when mctp_key_add() is successful.

In the Linux kernel, the following vulnerability has been resolved: net: mscc: ocelot: fix use-after-free in ocelot_vlan_del() ocelot_vlan_member_del() will free the struct ocelot_bridge_vlan, so if this is the same as the port's pvid_vlan which we access afterwards, what we're accessing is freed memory. Fix the bug by determining whether to clear ocelot_port->pvid_vlan prior to calling ocelot_vlan_member_del().

In the Linux kernel, the following vulnerability has been resolved: mtd: rawnand: gpmi: don't leak PM reference in error path If gpmi_nfc_apply_timings() fails, the PM runtime usage counter must be dropped.

In the Linux kernel, the following vulnerability has been resolved: net/sunrpc: fix reference count leaks in rpc_sysfs_xprt_state_change The refcount leak issues take place in an error handling path. When the 3rd argument buf doesn't match with "offline", "online" or "remove", the function simply returns -EINVAL and forgets to decrease the reference count of a rpc_xprt object and a rpc_xprt_switch object increased by rpc_sysfs_xprt_kobj_get_xprt() and rpc_sysfs_xprt_kobj_get_xprt_switch(), causing reference count leaks of both unused objects. Fix this issue by jumping to the error handling path labelled with out_put when buf matches none of "offline", "online" or "remove".

The Brizy – Page Builder plugin for WordPress is vulnerable to unauthorized modification of data due to a missing capability check on the 'update_item' function in all versions up to, and including, 2.4.44. This makes it possible for authenticated attackers, with contributor access and above, to modify the content of arbitrary published posts, which includes the ability to insert malicious JavaScript.

In streampark-console the list pages(e.g: application pages), users can sort page by field. This sort field is sent from the front-end to the back-end, and the SQL query is generated using this field. However, because this sort field isn't validated, there is a risk of SQL injection vulnerability. The attacker must successfully log into the system to launch an attack, which may cause data leakage. Since no data will be written, so this is a low-impact vulnerability. Mitigation: all users should upgrade to 2.1.4, Such parameters will be blocked.

Plate media is an open source, rich-text editor for React. Editors that use `MediaEmbedElement` and pass custom `urlParsers` to the `useMediaState` hook may be vulnerable to XSS if a custom parser allows `javascript:`, `data:` or `vbscript:` URLs to be embedded. Editors that do not use `urlParsers` and consume the `url` property directly may also be vulnerable if the URL is not sanitised. The default parsers `parseTwitterUrl` and `parseVideoUrl` are not affected. `@udecode/plate-media` 36.0.10 resolves this issue by only allowing HTTP and HTTPS URLs during parsing. This affects only the `embed` property returned from `useMediaState`. In addition, the `url` property returned from `useMediaState` has been renamed to `unsafeUrl` to indicate that it has not been sanitised. The `url` property on `element` is also unsafe, but has not been renamed. If you're using either of these properties directly, you will still need to validate the URL yourself. Users are advised to upgrade. Users unable to upgrade should ensure that any custom `urlParsers` do not allow `javascript:`, `data:` or `vbscript:` URLs to be returned in the `url` property of their return values. If `url` is consumed directly, validate the URL protocol before passing it to the `iframe` element.

eLinkSmart Hidden Smart Cabinet Lock 2024-05-22 has Incorrect Access Control and fails to perform an authorization check which can lead to card duplication and other attacks.

An SMM callout vulnerability was discovered in Supermicro X11DPH-T, X11DPH-Tq, and X11DPH-i motherboards with BIOS firmware before 4.4.

An arbitrary memory write vulnerability was discovered in Supermicro X11DPH-T, X11DPH-Tq, and X11DPH-i motherboards with BIOS firmware before 4.4.

An arbitrary memory write vulnerability was discovered in Supermicro X11DPG-HGX2, X11PDG-QT, X11PDG-OT, and X11PDG-SN motherboards with BIOS firmware before 4.4.

Improper input validation in the installer for some Zoom Apps for Windows may allow an authenticated user to conduct a privilege escalation via local access.

Race condition in the installer for some Zoom Apps and SDKs for Windows before version 6.0.0 may allow an authenticated user to conduct a privilege escalation via local access.

Tmall_demo before v2024.07.03 was discovered to contain a SQL injection vulnerability.

An access control issue in Tmall_demo v2024.07.03 allows attackers to obtain sensitive information.