CVE Database

In the Linux kernel, the following vulnerability has been resolved: ALSA: control: Avoid WARN() for symlink errors Using WARN() for showing the error of symlink creations don't give more information than telling that something goes wrong, since the usual code path is a lregister callback from each control element creation. More badly, the use of WARN() rather confuses fuzzer as if it were serious issues. This patch downgrades the warning messages to use the normal dev_err() instead of WARN(). For making it clearer, add the function name to the prefix, too.

In the Linux kernel, the following vulnerability has been resolved: bnxt_en: Fix aggregation ID mask to prevent oops on 5760X chips The 5760X (P7) chip's HW GRO/LRO interface is very similar to that of the previous generation (5750X or P5). However, the aggregation ID fields in the completion structures on P7 have been redefined from 16 bits to 12 bits. The freed up 4 bits are redefined for part of the metadata such as the VLAN ID. The aggregation ID mask was not modified when adding support for P7 chips. Including the extra 4 bits for the aggregation ID can potentially cause the driver to store or fetch the packet header of GRO/LRO packets in the wrong TPA buffer. It may hit the BUG() condition in __skb_pull() because the SKB contains no valid packet header: kernel BUG at include/linux/skbuff.h:2766! Oops: invalid opcode: 0000 1 PREEMPT SMP NOPTI CPU: 4 UID: 0 PID: 0 Comm: swapper/4 Kdump: loaded Tainted: G OE 6.12.0-rc2+ #7 Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE Hardware name: Dell Inc. PowerEdge R760/0VRV9X, BIOS 1.0.1 12/27/2022 RIP: 0010:eth_type_trans+0xda/0x140 Code: 80 00 00 00 eb c1 8b 47 70 2b 47 74 48 8b 97 d0 00 00 00 83 f8 01 7e 1b 48 85 d2 74 06 66 83 3a ff 74 09 b8 00 04 00 00 eb a5 <0f> 0b b8 00 01 00 00 eb 9c 48 85 ff 74 eb 31 f6 b9 02 00 00 00 48 RSP: 0018:ff615003803fcc28 EFLAGS: 00010283 RAX: 00000000000022d2 RBX: 0000000000000003 RCX: ff2e8c25da334040 RDX: 0000000000000040 RSI: ff2e8c25c1ce8000 RDI: ff2e8c25869f9000 RBP: ff2e8c258c31c000 R08: ff2e8c25da334000 R09: 0000000000000001 R10: ff2e8c25da3342c0 R11: ff2e8c25c1ce89c0 R12: ff2e8c258e0990b0 R13: ff2e8c25bb120000 R14: ff2e8c25c1ce89c0 R15: ff2e8c25869f9000 FS: 0000000000000000(0000) GS:ff2e8c34be300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055f05317e4c8 CR3: 000000108bac6006 CR4: 0000000000773ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <IRQ> ? die+0x33/0x90 ? do_trap+0xd9/0x100 ? eth_type_trans+0xda/0x140 ? do_error_trap+0x65/0x80 ? eth_type_trans+0xda/0x140 ? exc_invalid_op+0x4e/0x70 ? eth_type_trans+0xda/0x140 ? asm_exc_invalid_op+0x16/0x20 ? eth_type_trans+0xda/0x140 bnxt_tpa_end+0x10b/0x6b0 [bnxt_en] ? bnxt_tpa_start+0x195/0x320 [bnxt_en] bnxt_rx_pkt+0x902/0xd90 [bnxt_en] ? __bnxt_tx_int.constprop.0+0x89/0x300 [bnxt_en] ? kmem_cache_free+0x343/0x440 ? __bnxt_tx_int.constprop.0+0x24f/0x300 [bnxt_en] __bnxt_poll_work+0x193/0x370 [bnxt_en] bnxt_poll_p5+0x9a/0x300 [bnxt_en] ? try_to_wake_up+0x209/0x670 __napi_poll+0x29/0x1b0 Fix it by redefining the aggregation ID mask for P5_PLUS chips to be 12 bits. This will work because the maximum aggregation ID is less than 4096 on all P5_PLUS chips.

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: do not defer rule destruction via call_rcu nf_tables_chain_destroy can sleep, it can't be used from call_rcu callbacks. Moreover, nf_tables_rule_release() is only safe for error unwinding, while transaction mutex is held and the to-be-desroyed rule was not exposed to either dataplane or dumps, as it deactives+frees without the required synchronize_rcu() in-between. nft_rule_expr_deactivate() callbacks will change ->use counters of other chains/sets, see e.g. nft_lookup .deactivate callback, these must be serialized via transaction mutex. Also add a few lockdep asserts to make this more explicit. Calling synchronize_rcu() isn't ideal, but fixing this without is hard and way more intrusive. As-is, we can get: WARNING: .. net/netfilter/nf_tables_api.c:5515 nft_set_destroy+0x.. Workqueue: events nf_tables_trans_destroy_work RIP: 0010:nft_set_destroy+0x3fe/0x5c0 Call Trace: <TASK> nf_tables_trans_destroy_work+0x6b7/0xad0 process_one_work+0x64a/0xce0 worker_thread+0x613/0x10d0 In case the synchronize_rcu becomes an issue, we can explore alternatives. One way would be to allocate nft_trans_rule objects + one nft_trans_chain object, deactivate the rules + the chain and then defer the freeing to the nft destroy workqueue. We'd still need to keep the synchronize_rcu path as a fallback to handle -ENOMEM corner cases though.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_event: Fix using rcu_read_(un)lock while iterating The usage of rcu_read_(un)lock while inside list_for_each_entry_rcu is not safe since for the most part entries fetched this way shall be treated as rcu_dereference: Note that the value returned by rcu_dereference() is valid only within the enclosing RCU read-side critical section [1]_. For example, the following is **not** legal:: rcu_read_lock(); p = rcu_dereference(head.next); rcu_read_unlock(); x = p->address; /* BUG!!! */ rcu_read_lock(); y = p->data; /* BUG!!! */ rcu_read_unlock();

In the Linux kernel, the following vulnerability has been resolved: net: enetc: Do not configure preemptible TCs if SIs do not support Both ENETC PF and VF drivers share enetc_setup_tc_mqprio() to configure MQPRIO. And enetc_setup_tc_mqprio() calls enetc_change_preemptible_tcs() to configure preemptible TCs. However, only PF is able to configure preemptible TCs. Because only PF has related registers, while VF does not have these registers. So for VF, its hw->port pointer is NULL. Therefore, VF will access an invalid pointer when accessing a non-existent register, which will cause a crash issue. The simplified log is as follows. root@ls1028ardb:~# tc qdisc add dev eno0vf0 parent root handle 100: \ mqprio num_tc 4 map 0 0 1 1 2 2 3 3 queues 1@0 1@1 1@2 1@3 hw 1 [ 187.290775] Unable to handle kernel paging request at virtual address 0000000000001f00 [ 187.424831] pc : enetc_mm_commit_preemptible_tcs+0x1c4/0x400 [ 187.430518] lr : enetc_mm_commit_preemptible_tcs+0x30c/0x400 [ 187.511140] Call trace: [ 187.513588] enetc_mm_commit_preemptible_tcs+0x1c4/0x400 [ 187.518918] enetc_setup_tc_mqprio+0x180/0x214 [ 187.523374] enetc_vf_setup_tc+0x1c/0x30 [ 187.527306] mqprio_enable_offload+0x144/0x178 [ 187.531766] mqprio_init+0x3ec/0x668 [ 187.535351] qdisc_create+0x15c/0x488 [ 187.539023] tc_modify_qdisc+0x398/0x73c [ 187.542958] rtnetlink_rcv_msg+0x128/0x378 [ 187.547064] netlink_rcv_skb+0x60/0x130 [ 187.550910] rtnetlink_rcv+0x18/0x24 [ 187.554492] netlink_unicast+0x300/0x36c [ 187.558425] netlink_sendmsg+0x1a8/0x420 [ 187.606759] ---[ end trace 0000000000000000 ]--- In addition, some PFs also do not support configuring preemptible TCs, such as eno1 and eno3 on LS1028A. It won't crash like it does for VFs, but we should prevent these PFs from accessing these unimplemented registers.

In the Linux kernel, the following vulnerability has been resolved: net: hsr: avoid potential out-of-bound access in fill_frame_info() syzbot is able to feed a packet with 14 bytes, pretending it is a vlan one. Since fill_frame_info() is relying on skb->mac_len already, extend the check to cover this case. BUG: KMSAN: uninit-value in fill_frame_info net/hsr/hsr_forward.c:709 [inline] BUG: KMSAN: uninit-value in hsr_forward_skb+0x9ee/0x3b10 net/hsr/hsr_forward.c:724 fill_frame_info net/hsr/hsr_forward.c:709 [inline] hsr_forward_skb+0x9ee/0x3b10 net/hsr/hsr_forward.c:724 hsr_dev_xmit+0x2f0/0x350 net/hsr/hsr_device.c:235 __netdev_start_xmit include/linux/netdevice.h:5002 [inline] netdev_start_xmit include/linux/netdevice.h:5011 [inline] xmit_one net/core/dev.c:3590 [inline] dev_hard_start_xmit+0x247/0xa20 net/core/dev.c:3606 __dev_queue_xmit+0x366a/0x57d0 net/core/dev.c:4434 dev_queue_xmit include/linux/netdevice.h:3168 [inline] packet_xmit+0x9c/0x6c0 net/packet/af_packet.c:276 packet_snd net/packet/af_packet.c:3146 [inline] packet_sendmsg+0x91ae/0xa6f0 net/packet/af_packet.c:3178 sock_sendmsg_nosec net/socket.c:711 [inline] __sock_sendmsg+0x30f/0x380 net/socket.c:726 __sys_sendto+0x594/0x750 net/socket.c:2197 __do_sys_sendto net/socket.c:2204 [inline] __se_sys_sendto net/socket.c:2200 [inline] __x64_sys_sendto+0x125/0x1d0 net/socket.c:2200 x64_sys_call+0x346a/0x3c30 arch/x86/include/generated/asm/syscalls_64.h:45 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Uninit was created at: slab_post_alloc_hook mm/slub.c:4091 [inline] slab_alloc_node mm/slub.c:4134 [inline] kmem_cache_alloc_node_noprof+0x6bf/0xb80 mm/slub.c:4186 kmalloc_reserve+0x13d/0x4a0 net/core/skbuff.c:587 __alloc_skb+0x363/0x7b0 net/core/skbuff.c:678 alloc_skb include/linux/skbuff.h:1323 [inline] alloc_skb_with_frags+0xc8/0xd00 net/core/skbuff.c:6612 sock_alloc_send_pskb+0xa81/0xbf0 net/core/sock.c:2881 packet_alloc_skb net/packet/af_packet.c:2995 [inline] packet_snd net/packet/af_packet.c:3089 [inline] packet_sendmsg+0x74c6/0xa6f0 net/packet/af_packet.c:3178 sock_sendmsg_nosec net/socket.c:711 [inline] __sock_sendmsg+0x30f/0x380 net/socket.c:726 __sys_sendto+0x594/0x750 net/socket.c:2197 __do_sys_sendto net/socket.c:2204 [inline] __se_sys_sendto net/socket.c:2200 [inline] __x64_sys_sendto+0x125/0x1d0 net/socket.c:2200 x64_sys_call+0x346a/0x3c30 arch/x86/include/generated/asm/syscalls_64.h:45 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f

In the Linux kernel, the following vulnerability has been resolved: net: Fix icmp host relookup triggering ip_rt_bug arp link failure may trigger ip_rt_bug while xfrm enabled, call trace is: WARNING: CPU: 0 PID: 0 at net/ipv4/route.c:1241 ip_rt_bug+0x14/0x20 Modules linked in: CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 6.12.0-rc6-00077-g2e1b3cc9d7f7 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:ip_rt_bug+0x14/0x20 Call Trace: <IRQ> ip_send_skb+0x14/0x40 __icmp_send+0x42d/0x6a0 ipv4_link_failure+0xe2/0x1d0 arp_error_report+0x3c/0x50 neigh_invalidate+0x8d/0x100 neigh_timer_handler+0x2e1/0x330 call_timer_fn+0x21/0x120 __run_timer_base.part.0+0x1c9/0x270 run_timer_softirq+0x4c/0x80 handle_softirqs+0xac/0x280 irq_exit_rcu+0x62/0x80 sysvec_apic_timer_interrupt+0x77/0x90 The script below reproduces this scenario: ip xfrm policy add src 0.0.0.0/0 dst 0.0.0.0/0 \ dir out priority 0 ptype main flag localok icmp ip l a veth1 type veth ip a a 192.168.141.111/24 dev veth0 ip l s veth0 up ping 192.168.141.155 -c 1 icmp_route_lookup() create input routes for locally generated packets while xfrm relookup ICMP traffic.Then it will set input route (dst->out = ip_rt_bug) to skb for DESTUNREACH. For ICMP err triggered by locally generated packets, dst->dev of output route is loopback. Generally, xfrm relookup verification is not required on loopback interfaces (net.ipv4.conf.lo.disable_xfrm = 1). Skip icmp relookup for locally generated packets to fix it.

In the Linux kernel, the following vulnerability has been resolved: ipv6: avoid possible NULL deref in modify_prefix_route() syzbot found a NULL deref [1] in modify_prefix_route(), caused by one fib6_info without a fib6_table pointer set. This can happen for net->ipv6.fib6_null_entry [1] Oops: general protection fault, probably for non-canonical address 0xdffffc0000000006: 0000 [#1] PREEMPT SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000030-0x0000000000000037] CPU: 1 UID: 0 PID: 5837 Comm: syz-executor888 Not tainted 6.12.0-syzkaller-09567-g7eef7e306d3c #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 RIP: 0010:__lock_acquire+0xe4/0x3c40 kernel/locking/lockdep.c:5089 Code: 08 84 d2 0f 85 15 14 00 00 44 8b 0d ca 98 f5 0e 45 85 c9 0f 84 b4 0e 00 00 48 b8 00 00 00 00 00 fc ff df 4c 89 e2 48 c1 ea 03 <80> 3c 02 00 0f 85 96 2c 00 00 49 8b 04 24 48 3d a0 07 7f 93 0f 84 RSP: 0018:ffffc900035d7268 EFLAGS: 00010006 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000006 RSI: 1ffff920006bae5f RDI: 0000000000000030 RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000001 R10: ffffffff90608e17 R11: 0000000000000001 R12: 0000000000000030 R13: ffff888036334880 R14: 0000000000000000 R15: 0000000000000000 FS: 0000555579e90380(0000) GS:ffff8880b8700000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007ffc59cc4278 CR3: 0000000072b54000 CR4: 00000000003526f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> lock_acquire.part.0+0x11b/0x380 kernel/locking/lockdep.c:5849 __raw_spin_lock_bh include/linux/spinlock_api_smp.h:126 [inline] _raw_spin_lock_bh+0x33/0x40 kernel/locking/spinlock.c:178 spin_lock_bh include/linux/spinlock.h:356 [inline] modify_prefix_route+0x30b/0x8b0 net/ipv6/addrconf.c:4831 inet6_addr_modify net/ipv6/addrconf.c:4923 [inline] inet6_rtm_newaddr+0x12c7/0x1ab0 net/ipv6/addrconf.c:5055 rtnetlink_rcv_msg+0x3c7/0xea0 net/core/rtnetlink.c:6920 netlink_rcv_skb+0x16b/0x440 net/netlink/af_netlink.c:2541 netlink_unicast_kernel net/netlink/af_netlink.c:1321 [inline] netlink_unicast+0x53c/0x7f0 net/netlink/af_netlink.c:1347 netlink_sendmsg+0x8b8/0xd70 net/netlink/af_netlink.c:1891 sock_sendmsg_nosec net/socket.c:711 [inline] __sock_sendmsg net/socket.c:726 [inline] ____sys_sendmsg+0xaaf/0xc90 net/socket.c:2583 ___sys_sendmsg+0x135/0x1e0 net/socket.c:2637 __sys_sendmsg+0x16e/0x220 net/socket.c:2669 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7fd1dcef8b79 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 c1 17 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007ffc59cc4378 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fd1dcef8b79 RDX: 0000000000040040 RSI: 0000000020000140 RDI: 0000000000000004 RBP: 00000000000113fd R08: 0000000000000006 R09: 0000000000000006 R10: 0000000000000006 R11: 0000000000000246 R12: 00007ffc59cc438c R13: 431bde82d7b634db R14: 0000000000000001 R15: 0000000000000001 </TASK>

In the Linux kernel, the following vulnerability has been resolved: can: j1939: j1939_session_new(): fix skb reference counting Since j1939_session_skb_queue() does an extra skb_get() for each new skb, do the same for the initial one in j1939_session_new() to avoid refcount underflow. [mkl: clean up commit message]

In the Linux kernel, the following vulnerability has been resolved: net/ipv6: release expired exception dst cached in socket Dst objects get leaked in ip6_negative_advice() when this function is executed for an expired IPv6 route located in the exception table. There are several conditions that must be fulfilled for the leak to occur: * an ICMPv6 packet indicating a change of the MTU for the path is received, resulting in an exception dst being created * a TCP connection that uses the exception dst for routing packets must start timing out so that TCP begins retransmissions * after the exception dst expires, the FIB6 garbage collector must not run before TCP executes ip6_negative_advice() for the expired exception dst When TCP executes ip6_negative_advice() for an exception dst that has expired and if no other socket holds a reference to the exception dst, the refcount of the exception dst is 2, which corresponds to the increment made by dst_init() and the increment made by the TCP socket for which the connection is timing out. The refcount made by the socket is never released. The refcount of the dst is decremented in sk_dst_reset() but that decrement is counteracted by a dst_hold() intentionally placed just before the sk_dst_reset() in ip6_negative_advice(). After ip6_negative_advice() has finished, there is no other object tied to the dst. The socket lost its reference stored in sk_dst_cache and the dst is no longer in the exception table. The exception dst becomes a leaked object. As a result of this dst leak, an unbalanced refcount is reported for the loopback device of a net namespace being destroyed under kernels that do not contain e5f80fcf869a ("ipv6: give an IPv6 dev to blackhole_netdev"): unregister_netdevice: waiting for lo to become free. Usage count = 2 Fix the dst leak by removing the dst_hold() in ip6_negative_advice(). The patch that introduced the dst_hold() in ip6_negative_advice() was 92f1655aa2b22 ("net: fix __dst_negative_advice() race"). But 92f1655aa2b22 merely refactored the code with regards to the dst refcount so the issue was present even before 92f1655aa2b22. The bug was introduced in 54c1a859efd9f ("ipv6: Don't drop cache route entry unless timer actually expired.") where the expired cached route is deleted and the sk_dst_cache member of the socket is set to NULL by calling dst_negative_advice() but the refcount belonging to the socket is left unbalanced. The IPv4 version - ipv4_negative_advice() - is not affected by this bug. When the TCP connection times out ipv4_negative_advice() merely resets the sk_dst_cache of the socket while decrementing the refcount of the exception dst.

In the Linux kernel, the following vulnerability has been resolved: dccp: Fix memory leak in dccp_feat_change_recv If dccp_feat_push_confirm() fails after new value for SP feature was accepted without reconciliation ('entry == NULL' branch), memory allocated for that value with dccp_feat_clone_sp_val() is never freed. Here is the kmemleak stack for this: unreferenced object 0xffff88801d4ab488 (size 8): comm "syz-executor310", pid 1127, jiffies 4295085598 (age 41.666s) hex dump (first 8 bytes): 01 b4 4a 1d 80 88 ff ff ..J..... backtrace: [<00000000db7cabfe>] kmemdup+0x23/0x50 mm/util.c:128 [<0000000019b38405>] kmemdup include/linux/string.h:465 [inline] [<0000000019b38405>] dccp_feat_clone_sp_val net/dccp/feat.c:371 [inline] [<0000000019b38405>] dccp_feat_clone_sp_val net/dccp/feat.c:367 [inline] [<0000000019b38405>] dccp_feat_change_recv net/dccp/feat.c:1145 [inline] [<0000000019b38405>] dccp_feat_parse_options+0x1196/0x2180 net/dccp/feat.c:1416 [<00000000b1f6d94a>] dccp_parse_options+0xa2a/0x1260 net/dccp/options.c:125 [<0000000030d7b621>] dccp_rcv_state_process+0x197/0x13d0 net/dccp/input.c:650 [<000000001f74c72e>] dccp_v4_do_rcv+0xf9/0x1a0 net/dccp/ipv4.c:688 [<00000000a6c24128>] sk_backlog_rcv include/net/sock.h:1041 [inline] [<00000000a6c24128>] __release_sock+0x139/0x3b0 net/core/sock.c:2570 [<00000000cf1f3a53>] release_sock+0x54/0x1b0 net/core/sock.c:3111 [<000000008422fa23>] inet_wait_for_connect net/ipv4/af_inet.c:603 [inline] [<000000008422fa23>] __inet_stream_connect+0x5d0/0xf70 net/ipv4/af_inet.c:696 [<0000000015b6f64d>] inet_stream_connect+0x53/0xa0 net/ipv4/af_inet.c:735 [<0000000010122488>] __sys_connect_file+0x15c/0x1a0 net/socket.c:1865 [<00000000b4b70023>] __sys_connect+0x165/0x1a0 net/socket.c:1882 [<00000000f4cb3815>] __do_sys_connect net/socket.c:1892 [inline] [<00000000f4cb3815>] __se_sys_connect net/socket.c:1889 [inline] [<00000000f4cb3815>] __x64_sys_connect+0x6e/0xb0 net/socket.c:1889 [<00000000e7b1e839>] do_syscall_64+0x33/0x40 arch/x86/entry/common.c:46 [<0000000055e91434>] entry_SYSCALL_64_after_hwframe+0x67/0xd1 Clean up the allocated memory in case of dccp_feat_push_confirm() failure and bail out with an error reset code. Found by Linux Verification Center (linuxtesting.org) with Syzkaller.

In the Linux kernel, the following vulnerability has been resolved: net/smc: initialize close_work early to avoid warning We encountered a warning that close_work was canceled before initialization. WARNING: CPU: 7 PID: 111103 at kernel/workqueue.c:3047 __flush_work+0x19e/0x1b0 Workqueue: events smc_lgr_terminate_work [smc] RIP: 0010:__flush_work+0x19e/0x1b0 Call Trace: ? __wake_up_common+0x7a/0x190 ? work_busy+0x80/0x80 __cancel_work_timer+0xe3/0x160 smc_close_cancel_work+0x1a/0x70 [smc] smc_close_active_abort+0x207/0x360 [smc] __smc_lgr_terminate.part.38+0xc8/0x180 [smc] process_one_work+0x19e/0x340 worker_thread+0x30/0x370 ? process_one_work+0x340/0x340 kthread+0x117/0x130 ? __kthread_cancel_work+0x50/0x50 ret_from_fork+0x22/0x30 This is because when smc_close_cancel_work is triggered, e.g. the RDMA driver is rmmod and the LGR is terminated, the conn->close_work is flushed before initialization, resulting in WARN_ON(!work->func). __smc_lgr_terminate | smc_connect_{rdma|ism} ------------------------------------------------------------- | smc_conn_create | \- smc_lgr_register_conn for conn in lgr->conns_all | \- smc_conn_kill | \- smc_close_active_abort | \- smc_close_cancel_work | \- cancel_work_sync | \- __flush_work | (close_work) | | smc_close_init | \- INIT_WORK(&close_work) So fix this by initializing close_work before establishing the connection.

In the Linux kernel, the following vulnerability has been resolved: net: hsr: must allocate more bytes for RedBox support Blamed commit forgot to change hsr_init_skb() to allocate larger skb for RedBox case. Indeed, send_hsr_supervision_frame() will add two additional components (struct hsr_sup_tlv and struct hsr_sup_payload) syzbot reported the following crash: skbuff: skb_over_panic: text:ffffffff8afd4b0a len:34 put:6 head:ffff88802ad29e00 data:ffff88802ad29f22 tail:0x144 end:0x140 dev:gretap0 ------------[ cut here ]------------ kernel BUG at net/core/skbuff.c:206 ! Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN NOPTI CPU: 2 UID: 0 PID: 7611 Comm: syz-executor Not tainted 6.12.0-syzkaller #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 RIP: 0010:skb_panic+0x157/0x1d0 net/core/skbuff.c:206 Code: b6 04 01 84 c0 74 04 3c 03 7e 21 8b 4b 70 41 56 45 89 e8 48 c7 c7 a0 7d 9b 8c 41 57 56 48 89 ee 52 4c 89 e2 e8 9a 76 79 f8 90 <0f> 0b 4c 89 4c 24 10 48 89 54 24 08 48 89 34 24 e8 94 76 fb f8 4c RSP: 0018:ffffc90000858ab8 EFLAGS: 00010282 RAX: 0000000000000087 RBX: ffff8880598c08c0 RCX: ffffffff816d3e69 RDX: 0000000000000000 RSI: ffffffff816de786 RDI: 0000000000000005 RBP: ffffffff8c9b91c0 R08: 0000000000000005 R09: 0000000000000000 R10: 0000000000000302 R11: ffffffff961cc1d0 R12: ffffffff8afd4b0a R13: 0000000000000006 R14: ffff88804b938130 R15: 0000000000000140 FS: 000055558a3d6500(0000) GS:ffff88806a800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f1295974ff8 CR3: 000000002ab6e000 CR4: 0000000000352ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <IRQ> skb_over_panic net/core/skbuff.c:211 [inline] skb_put+0x174/0x1b0 net/core/skbuff.c:2617 send_hsr_supervision_frame+0x6fa/0x9e0 net/hsr/hsr_device.c:342 hsr_proxy_announce+0x1a3/0x4a0 net/hsr/hsr_device.c:436 call_timer_fn+0x1a0/0x610 kernel/time/timer.c:1794 expire_timers kernel/time/timer.c:1845 [inline] __run_timers+0x6e8/0x930 kernel/time/timer.c:2419 __run_timer_base kernel/time/timer.c:2430 [inline] __run_timer_base kernel/time/timer.c:2423 [inline] run_timer_base+0x111/0x190 kernel/time/timer.c:2439 run_timer_softirq+0x1a/0x40 kernel/time/timer.c:2449 handle_softirqs+0x213/0x8f0 kernel/softirq.c:554 __do_softirq kernel/softirq.c:588 [inline] invoke_softirq kernel/softirq.c:428 [inline] __irq_exit_rcu kernel/softirq.c:637 [inline] irq_exit_rcu+0xbb/0x120 kernel/softirq.c:649 instr_sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1049 [inline] sysvec_apic_timer_interrupt+0xa4/0xc0 arch/x86/kernel/apic/apic.c:1049 </IRQ>

In the Linux kernel, the following vulnerability has been resolved: netfilter: ipset: Hold module reference while requesting a module User space may unload ip_set.ko while it is itself requesting a set type backend module, leading to a kernel crash. The race condition may be provoked by inserting an mdelay() right after the nfnl_unlock() call.

In the Linux kernel, the following vulnerability has been resolved: geneve: do not assume mac header is set in geneve_xmit_skb() We should not assume mac header is set in output path. Use skb_eth_hdr() instead of eth_hdr() to fix the issue. sysbot reported the following : WARNING: CPU: 0 PID: 11635 at include/linux/skbuff.h:3052 skb_mac_header include/linux/skbuff.h:3052 [inline] WARNING: CPU: 0 PID: 11635 at include/linux/skbuff.h:3052 eth_hdr include/linux/if_ether.h:24 [inline] WARNING: CPU: 0 PID: 11635 at include/linux/skbuff.h:3052 geneve_xmit_skb drivers/net/geneve.c:898 [inline] WARNING: CPU: 0 PID: 11635 at include/linux/skbuff.h:3052 geneve_xmit+0x4c38/0x5730 drivers/net/geneve.c:1039 Modules linked in: CPU: 0 UID: 0 PID: 11635 Comm: syz.4.1423 Not tainted 6.12.0-syzkaller-10296-gaaf20f870da0 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 RIP: 0010:skb_mac_header include/linux/skbuff.h:3052 [inline] RIP: 0010:eth_hdr include/linux/if_ether.h:24 [inline] RIP: 0010:geneve_xmit_skb drivers/net/geneve.c:898 [inline] RIP: 0010:geneve_xmit+0x4c38/0x5730 drivers/net/geneve.c:1039 Code: 21 c6 02 e9 35 d4 ff ff e8 a5 48 4c fb 90 0f 0b 90 e9 fd f5 ff ff e8 97 48 4c fb 90 0f 0b 90 e9 d8 f5 ff ff e8 89 48 4c fb 90 <0f> 0b 90 e9 41 e4 ff ff e8 7b 48 4c fb 90 0f 0b 90 e9 cd e7 ff ff RSP: 0018:ffffc90003b2f870 EFLAGS: 00010283 RAX: 000000000000037a RBX: 000000000000ffff RCX: ffffc9000dc3d000 RDX: 0000000000080000 RSI: ffffffff86428417 RDI: 0000000000000003 RBP: ffffc90003b2f9f0 R08: 0000000000000003 R09: 000000000000ffff R10: 000000000000ffff R11: 0000000000000002 R12: ffff88806603c000 R13: 0000000000000000 R14: ffff8880685b2780 R15: 0000000000000e23 FS: 00007fdc2deed6c0(0000) GS:ffff8880b8600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000001b30a1dff8 CR3: 0000000056b8c000 CR4: 00000000003526f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> __netdev_start_xmit include/linux/netdevice.h:5002 [inline] netdev_start_xmit include/linux/netdevice.h:5011 [inline] __dev_direct_xmit+0x58a/0x720 net/core/dev.c:4490 dev_direct_xmit include/linux/netdevice.h:3181 [inline] packet_xmit+0x1e4/0x360 net/packet/af_packet.c:285 packet_snd net/packet/af_packet.c:3146 [inline] packet_sendmsg+0x2700/0x5660 net/packet/af_packet.c:3178 sock_sendmsg_nosec net/socket.c:711 [inline] __sock_sendmsg net/socket.c:726 [inline] __sys_sendto+0x488/0x4f0 net/socket.c:2197 __do_sys_sendto net/socket.c:2204 [inline] __se_sys_sendto net/socket.c:2200 [inline] __x64_sys_sendto+0xe0/0x1c0 net/socket.c:2200 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f

In the Linux kernel, the following vulnerability has been resolved: gpio: grgpio: Add NULL check in grgpio_probe devm_kasprintf() can return a NULL pointer on failure,but this returned value in grgpio_probe is not checked. Add NULL check in grgpio_probe, to handle kernel NULL pointer dereference error.

In the Linux kernel, the following vulnerability has been resolved: nvme-tcp: fix the memleak while create new ctrl failed Now while we create new ctrl failed, we have not free the tagset occupied by admin_q, here try to fix it.

In the Linux kernel, the following vulnerability has been resolved: ocfs2: free inode when ocfs2_get_init_inode() fails syzbot is reporting busy inodes after unmount, for commit 9c89fe0af826 ("ocfs2: Handle error from dquot_initialize()") forgot to call iput() when new_inode() succeeded and dquot_initialize() failed.

In the Linux kernel, the following vulnerability has been resolved: HID: wacom: fix when get product name maybe null pointer Due to incorrect dev->product reporting by certain devices, null pointer dereferences occur when dev->product is empty, leading to potential system crashes. This issue was found on EXCELSIOR DL37-D05 device with Loongson-LS3A6000-7A2000-DL37 motherboard. Kernel logs: [ 56.470885] usb 4-3: new full-speed USB device number 4 using ohci-pci [ 56.671638] usb 4-3: string descriptor 0 read error: -22 [ 56.671644] usb 4-3: New USB device found, idVendor=056a, idProduct=0374, bcdDevice= 1.07 [ 56.671647] usb 4-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 56.678839] hid-generic 0003:056A:0374.0004: hiddev0,hidraw3: USB HID v1.10 Device [HID 056a:0374] on usb-0000:00:05.0-3/input0 [ 56.697719] CPU 2 Unable to handle kernel paging request at virtual address 0000000000000000, era == 90000000066e35c8, ra == ffff800004f98a80 [ 56.697732] Oops[#1]: [ 56.697734] CPU: 2 PID: 2742 Comm: (udev-worker) Tainted: G OE 6.6.0-loong64-desktop #25.00.2000.015 [ 56.697737] Hardware name: Inspur CE520L2/C09901N000000000, BIOS 2.09.00 10/11/2024 [ 56.697739] pc 90000000066e35c8 ra ffff800004f98a80 tp 9000000125478000 sp 900000012547b8a0 [ 56.697741] a0 0000000000000000 a1 ffff800004818b28 a2 0000000000000000 a3 0000000000000000 [ 56.697743] a4 900000012547b8f0 a5 0000000000000000 a6 0000000000000000 a7 0000000000000000 [ 56.697745] t0 ffff800004818b2d t1 0000000000000000 t2 0000000000000003 t3 0000000000000005 [ 56.697747] t4 0000000000000000 t5 0000000000000000 t6 0000000000000000 t7 0000000000000000 [ 56.697748] t8 0000000000000000 u0 0000000000000000 s9 0000000000000000 s0 900000011aa48028 [ 56.697750] s1 0000000000000000 s2 0000000000000000 s3 ffff800004818e80 s4 ffff800004810000 [ 56.697751] s5 90000001000b98d0 s6 ffff800004811f88 s7 ffff800005470440 s8 0000000000000000 [ 56.697753] ra: ffff800004f98a80 wacom_update_name+0xe0/0x300 [wacom] [ 56.697802] ERA: 90000000066e35c8 strstr+0x28/0x120 [ 56.697806] CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE) [ 56.697816] PRMD: 0000000c (PPLV0 +PIE +PWE) [ 56.697821] EUEN: 00000000 (-FPE -SXE -ASXE -BTE) [ 56.697827] ECFG: 00071c1d (LIE=0,2-4,10-12 VS=7) [ 56.697831] ESTAT: 00010000 [PIL] (IS= ECode=1 EsubCode=0) [ 56.697835] BADV: 0000000000000000 [ 56.697836] PRID: 0014d000 (Loongson-64bit, Loongson-3A6000) [ 56.697838] Modules linked in: wacom(+) bnep bluetooth rfkill qrtr nls_iso8859_1 nls_cp437 snd_hda_codec_conexant snd_hda_codec_generic ledtrig_audio snd_hda_codec_hdmi snd_hda_intel snd_intel_dspcfg snd_hda_codec snd_hda_core snd_hwdep snd_pcm snd_timer snd soundcore input_leds mousedev led_class joydev deepin_netmonitor(OE) fuse nfnetlink dmi_sysfs ip_tables x_tables overlay amdgpu amdxcp drm_exec gpu_sched drm_buddy radeon drm_suballoc_helper i2c_algo_bit drm_ttm_helper r8169 ttm drm_display_helper spi_loongson_pci xhci_pci cec xhci_pci_renesas spi_loongson_core hid_generic realtek gpio_loongson_64bit [ 56.697887] Process (udev-worker) (pid: 2742, threadinfo=00000000aee0d8b4, task=00000000a9eff1f3) [ 56.697890] Stack : 0000000000000000 ffff800004817e00 0000000000000000 0000251c00000000 [ 56.697896] 0000000000000000 00000011fffffffd 0000000000000000 0000000000000000 [ 56.697901] 0000000000000000 1b67a968695184b9 0000000000000000 90000001000b98d0 [ 56.697906] 90000001000bb8d0 900000011aa48028 0000000000000000 ffff800004f9d74c [ 56.697911] 90000001000ba000 ffff800004f9ce58 0000000000000000 ffff800005470440 [ 56.697916] ffff800004811f88 90000001000b98d0 9000000100da2aa8 90000001000bb8d0 [ 56.697921] 0000000000000000 90000001000ba000 900000011aa48028 ffff800004f9d74c [ 56.697926] ffff8000054704e8 90000001000bb8b8 90000001000ba000 0000000000000000 [ 56.697931] 90000001000bb8d0 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: can: dev: can_set_termination(): allow sleeping GPIOs In commit 6e86a1543c37 ("can: dev: provide optional GPIO based termination support") GPIO based termination support was added. For no particular reason that patch uses gpiod_set_value() to set the GPIO. This leads to the following warning, if the systems uses a sleeping GPIO, i.e. behind an I2C port expander: | WARNING: CPU: 0 PID: 379 at /drivers/gpio/gpiolib.c:3496 gpiod_set_value+0x50/0x6c | CPU: 0 UID: 0 PID: 379 Comm: ip Not tainted 6.11.0-20241016-1 #1 823affae360cc91126e4d316d7a614a8bf86236c Replace gpiod_set_value() by gpiod_set_value_cansleep() to allow the use of sleeping GPIOs.

In the Linux kernel, the following vulnerability has been resolved: iommufd: Fix out_fput in iommufd_fault_alloc() As fput() calls the file->f_op->release op, where fault obj and ictx are getting released, there is no need to release these two after fput() one more time, which would result in imbalanced refcounts: refcount_t: decrement hit 0; leaking memory. WARNING: CPU: 48 PID: 2369 at lib/refcount.c:31 refcount_warn_saturate+0x60/0x230 Call trace: refcount_warn_saturate+0x60/0x230 (P) refcount_warn_saturate+0x60/0x230 (L) iommufd_fault_fops_release+0x9c/0xe0 [iommufd] ... VFS: Close: file count is 0 (f_op=iommufd_fops [iommufd]) WARNING: CPU: 48 PID: 2369 at fs/open.c:1507 filp_flush+0x3c/0xf0 Call trace: filp_flush+0x3c/0xf0 (P) filp_flush+0x3c/0xf0 (L) __arm64_sys_close+0x34/0x98 ... imbalanced put on file reference count WARNING: CPU: 48 PID: 2369 at fs/file.c:74 __file_ref_put+0x100/0x138 Call trace: __file_ref_put+0x100/0x138 (P) __file_ref_put+0x100/0x138 (L) __fput_sync+0x4c/0xd0 Drop those two lines to fix the warnings above.

In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Fix use after free on unload System crash is observed with stack trace warning of use after free. There are 2 signals to tell dpc_thread to terminate (UNLOADING flag and kthread_stop). On setting the UNLOADING flag when dpc_thread happens to run at the time and sees the flag, this causes dpc_thread to exit and clean up itself. When kthread_stop is called for final cleanup, this causes use after free. Remove UNLOADING signal to terminate dpc_thread. Use the kthread_stop as the main signal to exit dpc_thread. [596663.812935] kernel BUG at mm/slub.c:294! [596663.812950] invalid opcode: 0000 [#1] SMP PTI [596663.812957] CPU: 13 PID: 1475935 Comm: rmmod Kdump: loaded Tainted: G IOE --------- - - 4.18.0-240.el8.x86_64 #1 [596663.812960] Hardware name: HP ProLiant DL380p Gen8, BIOS P70 08/20/2012 [596663.812974] RIP: 0010:__slab_free+0x17d/0x360 ... [596663.813008] Call Trace: [596663.813022] ? __dentry_kill+0x121/0x170 [596663.813030] ? _cond_resched+0x15/0x30 [596663.813034] ? _cond_resched+0x15/0x30 [596663.813039] ? wait_for_completion+0x35/0x190 [596663.813048] ? try_to_wake_up+0x63/0x540 [596663.813055] free_task+0x5a/0x60 [596663.813061] kthread_stop+0xf3/0x100 [596663.813103] qla2x00_remove_one+0x284/0x440 [qla2xxx]

In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: core: sysfs: Prevent div by zero Prevent a division by 0 when monitoring is not enabled.

In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: core: Cancel RTC work during ufshcd_remove() Currently, RTC work is only cancelled during __ufshcd_wl_suspend(). When ufshcd is removed in ufshcd_remove(), RTC work is not cancelled. Due to this, any further trigger of the RTC work after ufshcd_remove() would result in a NULL pointer dereference as below: Unable to handle kernel NULL pointer dereference at virtual address 00000000000002a4 Workqueue: events ufshcd_rtc_work Call trace: _raw_spin_lock_irqsave+0x34/0x8c pm_runtime_get_if_active+0x24/0xb4 ufshcd_rtc_work+0x124/0x19c process_scheduled_works+0x18c/0x2d8 worker_thread+0x144/0x280 kthread+0x11c/0x128 ret_from_fork+0x10/0x20 Since RTC work accesses the ufshcd internal structures, it should be cancelled when ufshcd is removed. So do that in ufshcd_remove(), as per the order in ufshcd_init().

In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: qcom: Only free platform MSIs when ESI is enabled Otherwise, it will result in a NULL pointer dereference as below: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008 Call trace: mutex_lock+0xc/0x54 platform_device_msi_free_irqs_all+0x14/0x20 ufs_qcom_remove+0x34/0x48 [ufs_qcom] platform_remove+0x28/0x44 device_remove+0x4c/0x80 device_release_driver_internal+0xd8/0x178 driver_detach+0x50/0x9c bus_remove_driver+0x6c/0xbc driver_unregister+0x30/0x60 platform_driver_unregister+0x14/0x20 ufs_qcom_pltform_exit+0x18/0xb94 [ufs_qcom] __arm64_sys_delete_module+0x180/0x260 invoke_syscall+0x44/0x100 el0_svc_common.constprop.0+0xc0/0xe0 do_el0_svc+0x1c/0x28 el0_svc+0x34/0xdc el0t_64_sync_handler+0xc0/0xc4 el0t_64_sync+0x190/0x194

In the Linux kernel, the following vulnerability has been resolved: pmdomain: imx: gpcv2: Adjust delay after power up handshake The udelay(5) is not enough, sometimes below kernel panic still be triggered: [ 4.012973] Kernel panic - not syncing: Asynchronous SError Interrupt [ 4.012976] CPU: 2 UID: 0 PID: 186 Comm: (udev-worker) Not tainted 6.12.0-rc2-0.0.0-devel-00004-g8b1b79e88956 #1 [ 4.012982] Hardware name: Toradex Verdin iMX8M Plus WB on Dahlia Board (DT) [ 4.012985] Call trace: [...] [ 4.013029] arm64_serror_panic+0x64/0x70 [ 4.013034] do_serror+0x3c/0x70 [ 4.013039] el1h_64_error_handler+0x30/0x54 [ 4.013046] el1h_64_error+0x64/0x68 [ 4.013050] clk_imx8mp_audiomix_runtime_resume+0x38/0x48 [ 4.013059] __genpd_runtime_resume+0x30/0x80 [ 4.013066] genpd_runtime_resume+0x114/0x29c [ 4.013073] __rpm_callback+0x48/0x1e0 [ 4.013079] rpm_callback+0x68/0x80 [ 4.013084] rpm_resume+0x3bc/0x6a0 [ 4.013089] __pm_runtime_resume+0x50/0x9c [ 4.013095] pm_runtime_get_suppliers+0x60/0x8c [ 4.013101] __driver_probe_device+0x4c/0x14c [ 4.013108] driver_probe_device+0x3c/0x120 [ 4.013114] __driver_attach+0xc4/0x200 [ 4.013119] bus_for_each_dev+0x7c/0xe0 [ 4.013125] driver_attach+0x24/0x30 [ 4.013130] bus_add_driver+0x110/0x240 [ 4.013135] driver_register+0x68/0x124 [ 4.013142] __platform_driver_register+0x24/0x30 [ 4.013149] sdma_driver_init+0x20/0x1000 [imx_sdma] [ 4.013163] do_one_initcall+0x60/0x1e0 [ 4.013168] do_init_module+0x5c/0x21c [ 4.013175] load_module+0x1a98/0x205c [ 4.013181] init_module_from_file+0x88/0xd4 [ 4.013187] __arm64_sys_finit_module+0x258/0x350 [ 4.013194] invoke_syscall.constprop.0+0x50/0xe0 [ 4.013202] do_el0_svc+0xa8/0xe0 [ 4.013208] el0_svc+0x3c/0x140 [ 4.013215] el0t_64_sync_handler+0x120/0x12c [ 4.013222] el0t_64_sync+0x190/0x194 [ 4.013228] SMP: stopping secondary CPUs The correct way is to wait handshake, but it needs BUS clock of BLK-CTL be enabled, which is in separate driver. So delay is the only option here. The udelay(10) is a data got by experiment.

In the Linux kernel, the following vulnerability has been resolved: cacheinfo: Allocate memory during CPU hotplug if not done from the primary CPU Commit 5944ce092b97 ("arch_topology: Build cacheinfo from primary CPU") adds functionality that architectures can use to optionally allocate and build cacheinfo early during boot. Commit 6539cffa9495 ("cacheinfo: Add arch specific early level initializer") lets secondary CPUs correct (and reallocate memory) cacheinfo data if needed. If the early build functionality is not used and cacheinfo does not need correction, memory for cacheinfo is never allocated. x86 does not use the early build functionality. Consequently, during the cacheinfo CPU hotplug callback, last_level_cache_is_valid() attempts to dereference a NULL pointer: BUG: kernel NULL pointer dereference, address: 0000000000000100 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not present page PGD 0 P4D 0 Oops: 0000 [#1] PREEPMT SMP NOPTI CPU: 0 PID 19 Comm: cpuhp/0 Not tainted 6.4.0-rc2 #1 RIP: 0010: last_level_cache_is_valid+0x95/0xe0a Allocate memory for cacheinfo during the cacheinfo CPU hotplug callback if not done earlier. Moreover, before determining the validity of the last-level cache info, ensure that it has been allocated. Simply checking for non-zero cache_leaves() is not sufficient, as some architectures (e.g., Intel processors) have non-zero cache_leaves() before allocation. Dereferencing NULL cacheinfo can occur in update_per_cpu_data_slice_size(). This function iterates over all online CPUs. However, a CPU may have come online recently, but its cacheinfo may not have been allocated yet. While here, remove an unnecessary indentation in allocate_cache_info(). [ bp: Massage. ]

In the Linux kernel, the following vulnerability has been resolved: sched/numa: fix memory leak due to the overwritten vma->numab_state [Problem Description] When running the hackbench program of LTP, the following memory leak is reported by kmemleak. # /opt/ltp/testcases/bin/hackbench 20 thread 1000 Running with 20*40 (== 800) tasks. # dmesg | grep kmemleak ... kmemleak: 480 new suspected memory leaks (see /sys/kernel/debug/kmemleak) kmemleak: 665 new suspected memory leaks (see /sys/kernel/debug/kmemleak) # cat /sys/kernel/debug/kmemleak unreferenced object 0xffff888cd8ca2c40 (size 64): comm "hackbench", pid 17142, jiffies 4299780315 hex dump (first 32 bytes): ac 74 49 00 01 00 00 00 4c 84 49 00 01 00 00 00 .tI.....L.I..... 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace (crc bff18fd4): [<ffffffff81419a89>] __kmalloc_cache_noprof+0x2f9/0x3f0 [<ffffffff8113f715>] task_numa_work+0x725/0xa00 [<ffffffff8110f878>] task_work_run+0x58/0x90 [<ffffffff81ddd9f8>] syscall_exit_to_user_mode+0x1c8/0x1e0 [<ffffffff81dd78d5>] do_syscall_64+0x85/0x150 [<ffffffff81e0012b>] entry_SYSCALL_64_after_hwframe+0x76/0x7e ... This issue can be consistently reproduced on three different servers: * a 448-core server * a 256-core server * a 192-core server [Root Cause] Since multiple threads are created by the hackbench program (along with the command argument 'thread'), a shared vma might be accessed by two or more cores simultaneously. When two or more cores observe that vma->numab_state is NULL at the same time, vma->numab_state will be overwritten. Although current code ensures that only one thread scans the VMAs in a single 'numa_scan_period', there might be a chance for another thread to enter in the next 'numa_scan_period' while we have not gotten till numab_state allocation [1]. Note that the command `/opt/ltp/testcases/bin/hackbench 50 process 1000` cannot the reproduce the issue. It is verified with 200+ test runs. [Solution] Use the cmpxchg atomic operation to ensure that only one thread executes the vma->numab_state assignment. [1] https://lore.kernel.org/lkml/1794be3c-358c-4cdc-a43d-a1f841d91ef7@amd.com/

In the Linux kernel, the following vulnerability has been resolved: mm/gup: handle NULL pages in unpin_user_pages() The recent addition of "pofs" (pages or folios) handling to gup has a flaw: it assumes that unpin_user_pages() handles NULL pages in the pages** array. That's not the case, as I discovered when I ran on a new configuration on my test machine. Fix this by skipping NULL pages in unpin_user_pages(), just like unpin_folios() already does. Details: when booting on x86 with "numa=fake=2 movablecore=4G" on Linux 6.12, and running this: tools/testing/selftests/mm/gup_longterm ...I get the following crash: BUG: kernel NULL pointer dereference, address: 0000000000000008 RIP: 0010:sanity_check_pinned_pages+0x3a/0x2d0 ... Call Trace: <TASK> ? __die_body+0x66/0xb0 ? page_fault_oops+0x30c/0x3b0 ? do_user_addr_fault+0x6c3/0x720 ? irqentry_enter+0x34/0x60 ? exc_page_fault+0x68/0x100 ? asm_exc_page_fault+0x22/0x30 ? sanity_check_pinned_pages+0x3a/0x2d0 unpin_user_pages+0x24/0xe0 check_and_migrate_movable_pages_or_folios+0x455/0x4b0 __gup_longterm_locked+0x3bf/0x820 ? mmap_read_lock_killable+0x12/0x50 ? __pfx_mmap_read_lock_killable+0x10/0x10 pin_user_pages+0x66/0xa0 gup_test_ioctl+0x358/0xb20 __se_sys_ioctl+0x6b/0xc0 do_syscall_64+0x7b/0x150 entry_SYSCALL_64_after_hwframe+0x76/0x7e

In the Linux kernel, the following vulnerability has been resolved: mm/mempolicy: fix migrate_to_node() assuming there is at least one VMA in a MM We currently assume that there is at least one VMA in a MM, which isn't true. So we might end up having find_vma() return NULL, to then de-reference NULL. So properly handle find_vma() returning NULL. This fixes the report: Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN PTI KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] CPU: 1 UID: 0 PID: 6021 Comm: syz-executor284 Not tainted 6.12.0-rc7-syzkaller-00187-gf868cd251776 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/30/2024 RIP: 0010:migrate_to_node mm/mempolicy.c:1090 [inline] RIP: 0010:do_migrate_pages+0x403/0x6f0 mm/mempolicy.c:1194 Code: ... RSP: 0018:ffffc9000375fd08 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffffc9000375fd78 RCX: 0000000000000000 RDX: ffff88807e171300 RSI: dffffc0000000000 RDI: ffff88803390c044 RBP: ffff88807e171428 R08: 0000000000000014 R09: fffffbfff2039ef1 R10: ffffffff901cf78f R11: 0000000000000000 R12: 0000000000000003 R13: ffffc9000375fe90 R14: ffffc9000375fe98 R15: ffffc9000375fdf8 FS: 00005555919e1380(0000) GS:ffff8880b8700000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00005555919e1ca8 CR3: 000000007f12a000 CR4: 00000000003526f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> kernel_migrate_pages+0x5b2/0x750 mm/mempolicy.c:1709 __do_sys_migrate_pages mm/mempolicy.c:1727 [inline] __se_sys_migrate_pages mm/mempolicy.c:1723 [inline] __x64_sys_migrate_pages+0x96/0x100 mm/mempolicy.c:1723 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f [akpm@linux-foundation.org: add unlikely()]