CVE Database

In the Linux kernel, the following vulnerability has been resolved: drm/vc4: hdmi: Avoid hang with debug registers when suspended Trying to read /sys/kernel/debug/dri/1/hdmi1_regs when the hdmi is disconnected results in a fatal system hang. This is due to the pm suspend code disabling the dvp clock. That is just a gate of the 108MHz clock in DVP_HT_RPI_MISC_CONFIG, which results in accesses hanging AXI bus. Protect against this.

In the Linux kernel, the following vulnerability has been resolved: irqchip/riscv-aplic: Prevent crash when MSI domain is missing If the APLIC driver is probed before the IMSIC driver, the parent MSI domain will be missing, which causes a NULL pointer dereference in msi_create_device_irq_domain(). Avoid this by deferring probe until the parent MSI domain is available. Use dev_err_probe() to avoid printing an error message when returning -EPROBE_DEFER.

In the Linux kernel, the following vulnerability has been resolved: crypto: bcm - add error check in the ahash_hmac_init function The ahash_init functions may return fails. The ahash_hmac_init should not return ok when ahash_init returns error. For an example, ahash_init will return -ENOMEM when allocation memory is error.

In the Linux kernel, the following vulnerability has been resolved: media: intel/ipu6: do not handle interrupts when device is disabled Some IPU6 devices have shared interrupts. We need to handle properly case when interrupt is triggered from other device on shared irq line and IPU6 itself disabled. In such case we get 0xffffffff from ISR_STATUS register and handle all irq's cases, for what we are not not prepared and usually hang the whole system. To avoid the issue use pm_runtime_get_if_active() to check if the device is enabled and prevent suspending it when we handle irq until the end of irq. Additionally use synchronize_irq() in suspend

In the Linux kernel, the following vulnerability has been resolved: octeontx2-pf: handle otx2_mbox_get_rsp errors in otx2_common.c Add error pointer check after calling otx2_mbox_get_rsp().

In the Linux kernel, the following vulnerability has been resolved: powerpc/fadump: Move fadump_cma_init to setup_arch() after initmem_init() During early init CMA_MIN_ALIGNMENT_BYTES can be PAGE_SIZE, since pageblock_order is still zero and it gets initialized later during initmem_init() e.g. setup_arch() -> initmem_init() -> sparse_init() -> set_pageblock_order() One such use case where this causes issue is - early_setup() -> early_init_devtree() -> fadump_reserve_mem() -> fadump_cma_init() This causes CMA memory alignment check to be bypassed in cma_init_reserved_mem(). Then later cma_activate_area() can hit a VM_BUG_ON_PAGE(pfn & ((1 << order) - 1)) if the reserved memory area was not pageblock_order aligned. Fix it by moving the fadump_cma_init() after initmem_init(), where other such cma reservations also gets called. <stack trace> ============== page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x10010 flags: 0x13ffff800000000(node=1|zone=0|lastcpupid=0x7ffff) CMA raw: 013ffff800000000 5deadbeef0000100 5deadbeef0000122 0000000000000000 raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000 page dumped because: VM_BUG_ON_PAGE(pfn & ((1 << order) - 1)) ------------[ cut here ]------------ kernel BUG at mm/page_alloc.c:778! Call Trace: __free_one_page+0x57c/0x7b0 (unreliable) free_pcppages_bulk+0x1a8/0x2c8 free_unref_page_commit+0x3d4/0x4e4 free_unref_page+0x458/0x6d0 init_cma_reserved_pageblock+0x114/0x198 cma_init_reserved_areas+0x270/0x3e0 do_one_initcall+0x80/0x2f8 kernel_init_freeable+0x33c/0x530 kernel_init+0x34/0x26c ret_from_kernel_user_thread+0x14/0x1c

In the Linux kernel, the following vulnerability has been resolved: thermal: testing: Initialize some variables annoteded with _free() Variables annotated with __free() need to be initialized if the function can return before they get updated for the first time or the attempt to free the memory pointed to by them upon function return may crash the kernel. Fix this issue in some places in the thermal testing code.

A connection hijacking vulnerability exists in some Huawei home routers. Successful exploitation of this vulnerability may cause DoS or information leakage.(Vulnerability ID:HWPSIRT-2023-34408) This vulnerability has been assigned a (CVE)ID:CVE-2023-52718

Huawei HiLink AI Life product has an identity authentication bypass vulnerability. Successful exploitation of this vulnerability may allow attackers to access restricted functions.(Vulnerability ID:HWPSIRT-2022-42291) This vulnerability has been assigned a (CVE)ID:CVE-2022-48470

Dcat-Admin v2.2.0-beta and v2.2.2-beta contains a Cross-Site Scripting (XSS) vulnerability via /admin/auth/menu and /admin/auth/extensions.

Dcat Admin v2.2.0-beta contains a cross-site scripting (XSS) vulnerability in /admin/articles/create.

An issue was discovered in Kurmi Provisioning Suite before 7.9.0.35, 7.10.x through 7.10.0.18, and 7.11.x through 7.11.0.15. An Observable Response Discrepancy vulnerability in the sendPasswordReinitLink action of the unlogged.do page allows remote attackers to test whether a username is valid or not. This allows confirmation of valid usernames.

An issue was discovered in Kurmi Provisioning Suite before 7.9.0.35 and 7.10.x through 7.10.0.18. A Directory Traversal and Local File Inclusion vulnerability in the logsSys.do page allows remote attackers (authenticated as administrators) to trigger the display of unintended files. Any file accessible to the Kurmi user account could be displayed, e.g., configuration files with information such as the database password.

A cross-site scripting (XSS) vulnerability in the graphicCustomization.do page in Kurmi Provisioning Suite before 7.9.0.38, 7.10.x through 7.10.0.18, and 7.11.x through 7.11.0.15 allows remote attackers (authenticated as system administrators) to inject arbitrary web script or HTML via the COMPONENT_fields(htmlTitle) field, which is rendered in other pages of the application for all users (if the graphical customization has been activated by a super-administrator).

A race condition vulnerability in SimplCommerce at commit 230310c8d7a0408569b292c5a805c459d47a1d8f allows attackers to bypass inventory restrictions by simultaneously submitting purchase requests from multiple accounts for the same product. This can lead to overselling when stock is limited, as the system fails to accurately track inventory under high concurrency, resulting in potential loss and unfulfilled orders.

A vulnerability was found in ruifang-tech Rebuild 3.8.6. It has been classified as problematic. This affects an unknown part of the file /user/admin-verify of the component Admin Verification Page. The manipulation of the argument nexturl with the input http://localhost/evil.html leads to open redirect. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in WISI Tangram GT31 up to 20241214 and classified as problematic. Affected by this issue is some unknown functionality of the component HTTP Request Handler. The manipulation leads to server-side request forgery. The attack may be launched remotely. The vendor was contacted early about this disclosure but did not respond in any way.

LinkAce is a self-hosted archive to collect links of your favorite websites. Prior to 1.15.6, a reflected cross-site scripting (XSS) vulnerability exists in the LinkAce. This issue occurs in the "URL" field of the "Edit Link" module, where user input is not properly sanitized or encoded before being reflected in the HTML response. This allows attackers to inject and execute arbitrary JavaScript in the context of the victim’s browser, leading to potential session hijacking, data theft, and unauthorized actions. This vulnerability is fixed in 1.15.6.

In the Linux kernel, the following vulnerability has been resolved: virtio_net: correct netdev_tx_reset_queue() invocation point When virtnet_close is followed by virtnet_open, some TX completions can possibly remain unconsumed, until they are finally processed during the first NAPI poll after the netdev_tx_reset_queue(), resulting in a crash [1]. Commit b96ed2c97c79 ("virtio_net: move netdev_tx_reset_queue() call before RX napi enable") was not sufficient to eliminate all BQL crash cases for virtio-net. This issue can be reproduced with the latest net-next master by running: `while :; do ip l set DEV down; ip l set DEV up; done` under heavy network TX load from inside the machine. netdev_tx_reset_queue() can actually be dropped from virtnet_open path; the device is not stopped in any case. For BQL core part, it's just like traffic nearly ceases to exist for some period. For stall detector added to BQL, even if virtnet_close could somehow lead to some TX completions delayed for long, followed by virtnet_open, we can just take it as stall as mentioned in commit 6025b9135f7a ("net: dqs: add NIC stall detector based on BQL"). Note also that users can still reset stall_max via sysfs. So, drop netdev_tx_reset_queue() from virtnet_enable_queue_pair(). This eliminates the BQL crashes. As a result, netdev_tx_reset_queue() is now explicitly required in freeze/restore path. This patch adds it to immediately after free_unused_bufs(), following the rule of thumb: netdev_tx_reset_queue() should follow any SKB freeing not followed by netdev_tx_completed_queue(). This seems the most consistent and streamlined approach, and now netdev_tx_reset_queue() runs whenever free_unused_bufs() is done. [1]: ------------[ cut here ]------------ kernel BUG at lib/dynamic_queue_limits.c:99! Oops: invalid opcode: 0000 [#1] PREEMPT SMP NOPTI CPU: 7 UID: 0 PID: 1598 Comm: ip Tainted: G N 6.12.0net-next_main+ #2 Tainted: [N]=TEST Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), \ BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 RIP: 0010:dql_completed+0x26b/0x290 Code: b7 c2 49 89 e9 44 89 da 89 c6 4c 89 d7 e8 ed 17 47 00 58 65 ff 0d 4d 27 90 7e 0f 85 fd fe ff ff e8 ea 53 8d ff e9 f3 fe ff ff <0f> 0b 01 d2 44 89 d1 29 d1 ba 00 00 00 00 0f 48 ca e9 28 ff ff ff RSP: 0018:ffffc900002b0d08 EFLAGS: 00010297 RAX: 0000000000000000 RBX: ffff888102398c80 RCX: 0000000080190009 RDX: 0000000000000000 RSI: 000000000000006a RDI: 0000000000000000 RBP: ffff888102398c00 R08: 0000000000000000 R09: 0000000000000000 R10: 00000000000000ca R11: 0000000000015681 R12: 0000000000000001 R13: ffffc900002b0d68 R14: ffff88811115e000 R15: ffff8881107aca40 FS: 00007f41ded69500(0000) GS:ffff888667dc0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000556ccc2dc1a0 CR3: 0000000104fd8003 CR4: 0000000000772ef0 PKRU: 55555554 Call Trace: <IRQ> ? die+0x32/0x80 ? do_trap+0xd9/0x100 ? dql_completed+0x26b/0x290 ? dql_completed+0x26b/0x290 ? do_error_trap+0x6d/0xb0 ? dql_completed+0x26b/0x290 ? exc_invalid_op+0x4c/0x60 ? dql_completed+0x26b/0x290 ? asm_exc_invalid_op+0x16/0x20 ? dql_completed+0x26b/0x290 __free_old_xmit+0xff/0x170 [virtio_net] free_old_xmit+0x54/0xc0 [virtio_net] virtnet_poll+0xf4/0xe30 [virtio_net] ? __update_load_avg_cfs_rq+0x264/0x2d0 ? update_curr+0x35/0x260 ? reweight_entity+0x1be/0x260 __napi_poll.constprop.0+0x28/0x1c0 net_rx_action+0x329/0x420 ? enqueue_hrtimer+0x35/0x90 ? trace_hardirqs_on+0x1d/0x80 ? kvm_sched_clock_read+0xd/0x20 ? sched_clock+0xc/0x30 ? kvm_sched_clock_read+0xd/0x20 ? sched_clock+0xc/0x30 ? sched_clock_cpu+0xd/0x1a0 handle_softirqs+0x138/0x3e0 do_softirq.part.0+0x89/0xc0 </IRQ> <TASK> __local_bh_enable_ip+0xa7/0xb0 virtnet_open+0xc8/0x310 [virtio_net] __dev_open+0xfa/0x1b0 __dev_change_flags+0x1de/0x250 dev_change_flags+0x22/0x60 do_setlink.isra.0+0x2df/0x10b0 ? rtnetlink_rcv_msg+0x34f/0x3f0 ? netlink_rcv_skb+0x54/0x100 ? netlink_unicas ---truncated---

In the Linux kernel, the following vulnerability has been resolved: riscv: mm: Do not call pmd dtor on vmemmap page table teardown The vmemmap's, which is used for RV64 with SPARSEMEM_VMEMMAP, page tables are populated using pmd (page middle directory) hugetables. However, the pmd allocation is not using the generic mechanism used by the VMA code (e.g. pmd_alloc()), or the RISC-V specific create_pgd_mapping()/alloc_pmd_late(). Instead, the vmemmap page table code allocates a page, and calls vmemmap_set_pmd(). This results in that the pmd ctor is *not* called, nor would it make sense to do so. Now, when tearing down a vmemmap page table pmd, the cleanup code would unconditionally, and incorrectly call the pmd dtor, which results in a crash (best case). This issue was found when running the HMM selftests: | tools/testing/selftests/mm# ./test_hmm.sh smoke | ... # when unloading the test_hmm.ko module | page: refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x10915b | flags: 0x1000000000000000(node=0|zone=1) | raw: 1000000000000000 0000000000000000 dead000000000122 0000000000000000 | raw: 0000000000000000 0000000000000000 00000001ffffffff 0000000000000000 | page dumped because: VM_BUG_ON_PAGE(ptdesc->pmd_huge_pte) | ------------[ cut here ]------------ | kernel BUG at include/linux/mm.h:3080! | Kernel BUG [#1] | Modules linked in: test_hmm(-) sch_fq_codel fuse drm drm_panel_orientation_quirks backlight dm_mod | CPU: 1 UID: 0 PID: 514 Comm: modprobe Tainted: G W 6.12.0-00982-gf2a4f1682d07 #2 | Tainted: [W]=WARN | Hardware name: riscv-virtio qemu/qemu, BIOS 2024.10 10/01/2024 | epc : remove_pgd_mapping+0xbec/0x1070 | ra : remove_pgd_mapping+0xbec/0x1070 | epc : ffffffff80010a68 ra : ffffffff80010a68 sp : ff20000000a73940 | gp : ffffffff827b2d88 tp : ff6000008785da40 t0 : ffffffff80fbce04 | t1 : 0720072007200720 t2 : 706d756420656761 s0 : ff20000000a73a50 | s1 : ff6000008915cff8 a0 : 0000000000000039 a1 : 0000000000000008 | a2 : ff600003fff0de20 a3 : 0000000000000000 a4 : 0000000000000000 | a5 : 0000000000000000 a6 : c0000000ffffefff a7 : ffffffff824469b8 | s2 : ff1c0000022456c0 s3 : ff1ffffffdbfffff s4 : ff6000008915c000 | s5 : ff6000008915c000 s6 : ff6000008915c000 s7 : ff1ffffffdc00000 | s8 : 0000000000000001 s9 : ff1ffffffdc00000 s10: ffffffff819a31f0 | s11: ffffffffffffffff t3 : ffffffff8000c950 t4 : ff60000080244f00 | t5 : ff60000080244000 t6 : ff20000000a73708 | status: 0000000200000120 badaddr: ffffffff80010a68 cause: 0000000000000003 | [<ffffffff80010a68>] remove_pgd_mapping+0xbec/0x1070 | [<ffffffff80fd238e>] vmemmap_free+0x14/0x1e | [<ffffffff8032e698>] section_deactivate+0x220/0x452 | [<ffffffff8032ef7e>] sparse_remove_section+0x4a/0x58 | [<ffffffff802f8700>] __remove_pages+0x7e/0xba | [<ffffffff803760d8>] memunmap_pages+0x2bc/0x3fe | [<ffffffff02a3ca28>] dmirror_device_remove_chunks+0x2ea/0x518 [test_hmm] | [<ffffffff02a3e026>] hmm_dmirror_exit+0x3e/0x1018 [test_hmm] | [<ffffffff80102c14>] __riscv_sys_delete_module+0x15a/0x2a6 | [<ffffffff80fd020c>] do_trap_ecall_u+0x1f2/0x266 | [<ffffffff80fde0a2>] _new_vmalloc_restore_context_a0+0xc6/0xd2 | Code: bf51 7597 0184 8593 76a5 854a 4097 0029 80e7 2c00 (9002) 7597 | ---[ end trace 0000000000000000 ]--- | Kernel panic - not syncing: Fatal exception in interrupt Add a check to avoid calling the pmd dtor, if the calling context is vmemmap_free().

In the Linux kernel, the following vulnerability has been resolved: gpio: graniterapids: Fix vGPIO driver crash Move setting irq_chip.name from probe() function to the initialization of "irq_chip" struct in order to fix vGPIO driver crash during bootup. Crash was caused by unauthorized modification of irq_chip.name field where irq_chip struct was initialized as const. This behavior is a consequence of suboptimal implementation of gpio_irq_chip_set_chip(), which should be changed to avoid casting away const qualifier. Crash log: BUG: unable to handle page fault for address: ffffffffc0ba81c0 /#PF: supervisor write access in kernel mode /#PF: error_code(0x0003) - permissions violation CPU: 33 UID: 0 PID: 1075 Comm: systemd-udevd Not tainted 6.12.0-rc6-00077-g2e1b3cc9d7f7 #1 Hardware name: Intel Corporation Kaseyville RP/Kaseyville RP, BIOS KVLDCRB1.PGS.0026.D73.2410081258 10/08/2024 RIP: 0010:gnr_gpio_probe+0x171/0x220 [gpio_graniterapids]

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: u_serial: Fix the issue that gs_start_io crashed due to accessing null pointer Considering that in some extreme cases, when u_serial driver is accessed by multiple threads, Thread A is executing the open operation and calling the gs_open, Thread B is executing the disconnect operation and calling the gserial_disconnect function,The port->port_usb pointer will be set to NULL. E.g. Thread A Thread B gs_open() gadget_unbind_driver() gs_start_io() composite_disconnect() gs_start_rx() gserial_disconnect() ... ... spin_unlock(&port->port_lock) status = usb_ep_queue() spin_lock(&port->port_lock) spin_lock(&port->port_lock) port->port_usb = NULL gs_free_requests(port->port_usb->in) spin_unlock(&port->port_lock) Crash This causes thread A to access a null pointer (port->port_usb is null) when calling the gs_free_requests function, causing a crash. If port_usb is NULL, the release request will be skipped as it will be done by gserial_disconnect. So add a null pointer check to gs_start_io before attempting to access the value of the pointer port->port_usb. Call trace: gs_start_io+0x164/0x25c gs_open+0x108/0x13c tty_open+0x314/0x638 chrdev_open+0x1b8/0x258 do_dentry_open+0x2c4/0x700 vfs_open+0x2c/0x3c path_openat+0xa64/0xc60 do_filp_open+0xb8/0x164 do_sys_openat2+0x84/0xf0 __arm64_sys_openat+0x70/0x9c invoke_syscall+0x58/0x114 el0_svc_common+0x80/0xe0 do_el0_svc+0x1c/0x28 el0_svc+0x38/0x68

In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: Fix qi_batch NULL pointer with nested parent domain The qi_batch is allocated when assigning cache tag for a domain. While for nested parent domain, it is missed. Hence, when trying to map pages to the nested parent, NULL dereference occurred. Also, there is potential memleak since there is no lock around domain->qi_batch allocation. To solve it, add a helper for qi_batch allocation, and call it in both the __cache_tag_assign_domain() and __cache_tag_assign_parent_domain(). BUG: kernel NULL pointer dereference, address: 0000000000000200 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 8104795067 P4D 0 Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 223 UID: 0 PID: 4357 Comm: qemu-system-x86 Not tainted 6.13.0-rc1-00028-g4b50c3c3b998-dirty #2632 Call Trace: ? __die+0x24/0x70 ? page_fault_oops+0x80/0x150 ? do_user_addr_fault+0x63/0x7b0 ? exc_page_fault+0x7c/0x220 ? asm_exc_page_fault+0x26/0x30 ? cache_tag_flush_range_np+0x13c/0x260 intel_iommu_iotlb_sync_map+0x1a/0x30 iommu_map+0x61/0xf0 batch_to_domain+0x188/0x250 iopt_area_fill_domains+0x125/0x320 ? rcu_is_watching+0x11/0x50 iopt_map_pages+0x63/0x100 iopt_map_common.isra.0+0xa7/0x190 iopt_map_user_pages+0x6a/0x80 iommufd_ioas_map+0xcd/0x1d0 iommufd_fops_ioctl+0x118/0x1c0 __x64_sys_ioctl+0x93/0xc0 do_syscall_64+0x71/0x140 entry_SYSCALL_64_after_hwframe+0x76/0x7e

In the Linux kernel, the following vulnerability has been resolved: drm/i915: Fix NULL pointer dereference in capture_engine When the intel_context structure contains NULL, it raises a NULL pointer dereference error in drm_info(). (cherry picked from commit 754302a5bc1bd8fd3b7d85c168b0a1af6d4bba4d)

In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Dereference null return value In the function pqm_uninit there is a call-assignment of "pdd = kfd_get_process_device_data" which could be null, and this value was later dereferenced without checking.

In the Linux kernel, the following vulnerability has been resolved: bpf,perf: Fix invalid prog_array access in perf_event_detach_bpf_prog Syzbot reported [1] crash that happens for following tracing scenario: - create tracepoint perf event with attr.inherit=1, attach it to the process and set bpf program to it - attached process forks -> chid creates inherited event the new child event shares the parent's bpf program and tp_event (hence prog_array) which is global for tracepoint - exit both process and its child -> release both events - first perf_event_detach_bpf_prog call will release tp_event->prog_array and second perf_event_detach_bpf_prog will crash, because tp_event->prog_array is NULL The fix makes sure the perf_event_detach_bpf_prog checks prog_array is valid before it tries to remove the bpf program from it. [1] https://lore.kernel.org/bpf/Z1MR6dCIKajNS6nU@krava/T/#m91dbf0688221ec7a7fc95e896a7ef9ff93b0b8ad

In the Linux kernel, the following vulnerability has been resolved: acpi: nfit: vmalloc-out-of-bounds Read in acpi_nfit_ctl Fix an issue detected by syzbot with KASAN: BUG: KASAN: vmalloc-out-of-bounds in cmd_to_func drivers/acpi/nfit/ core.c:416 [inline] BUG: KASAN: vmalloc-out-of-bounds in acpi_nfit_ctl+0x20e8/0x24a0 drivers/acpi/nfit/core.c:459 The issue occurs in cmd_to_func when the call_pkg->nd_reserved2 array is accessed without verifying that call_pkg points to a buffer that is appropriately sized as a struct nd_cmd_pkg. This can lead to out-of-bounds access and undefined behavior if the buffer does not have sufficient space. To address this, a check was added in acpi_nfit_ctl() to ensure that buf is not NULL and that buf_len is less than sizeof(*call_pkg) before accessing it. This ensures safe access to the members of call_pkg, including the nd_reserved2 array.

In the Linux kernel, the following vulnerability has been resolved: tipc: fix NULL deref in cleanup_bearer() syzbot found [1] that after blamed commit, ub->ubsock->sk was NULL when attempting the atomic_dec() : atomic_dec(&tipc_net(sock_net(ub->ubsock->sk))->wq_count); Fix this by caching the tipc_net pointer. [1] Oops: general protection fault, probably for non-canonical address 0xdffffc0000000006: 0000 [#1] PREEMPT SMP KASAN PTI KASAN: null-ptr-deref in range [0x0000000000000030-0x0000000000000037] CPU: 0 UID: 0 PID: 5896 Comm: kworker/0:3 Not tainted 6.13.0-rc1-next-20241203-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 Workqueue: events cleanup_bearer RIP: 0010:read_pnet include/net/net_namespace.h:387 [inline] RIP: 0010:sock_net include/net/sock.h:655 [inline] RIP: 0010:cleanup_bearer+0x1f7/0x280 net/tipc/udp_media.c:820 Code: 18 48 89 d8 48 c1 e8 03 42 80 3c 28 00 74 08 48 89 df e8 3c f7 99 f6 48 8b 1b 48 83 c3 30 e8 f0 e4 60 00 48 89 d8 48 c1 e8 03 <42> 80 3c 28 00 74 08 48 89 df e8 1a f7 99 f6 49 83 c7 e8 48 8b 1b RSP: 0018:ffffc9000410fb70 EFLAGS: 00010206 RAX: 0000000000000006 RBX: 0000000000000030 RCX: ffff88802fe45a00 RDX: 0000000000000001 RSI: 0000000000000008 RDI: ffffc9000410f900 RBP: ffff88807e1f0908 R08: ffffc9000410f907 R09: 1ffff92000821f20 R10: dffffc0000000000 R11: fffff52000821f21 R12: ffff888031d19980 R13: dffffc0000000000 R14: dffffc0000000000 R15: ffff88807e1f0918 FS: 0000000000000000(0000) GS:ffff8880b8600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000556ca050b000 CR3: 0000000031c0c000 CR4: 00000000003526f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400

In the Linux kernel, the following vulnerability has been resolved: net/mlx5: DR, prevent potential error pointer dereference The dr_domain_add_vport_cap() function generally returns NULL on error but sometimes we want it to return ERR_PTR(-EBUSY) so the caller can retry. The problem here is that "ret" can be either -EBUSY or -ENOMEM and if it's and -ENOMEM then the error pointer is propogated back and eventually dereferenced in dr_ste_v0_build_src_gvmi_qpn_tag().

In the Linux kernel, the following vulnerability has been resolved: net: lapb: increase LAPB_HEADER_LEN It is unclear if net/lapb code is supposed to be ready for 8021q. We can at least avoid crashes like the following : skbuff: skb_under_panic: text:ffffffff8aabe1f6 len:24 put:20 head:ffff88802824a400 data:ffff88802824a3fe tail:0x16 end:0x140 dev:nr0.2 ------------[ cut here ]------------ kernel BUG at net/core/skbuff.c:206 ! Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI CPU: 1 UID: 0 PID: 5508 Comm: dhcpcd Not tainted 6.12.0-rc7-syzkaller-00144-g66418447d27b #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/30/2024 RIP: 0010:skb_panic net/core/skbuff.c:206 [inline] RIP: 0010:skb_under_panic+0x14b/0x150 net/core/skbuff.c:216 Code: 0d 8d 48 c7 c6 2e 9e 29 8e 48 8b 54 24 08 8b 0c 24 44 8b 44 24 04 4d 89 e9 50 41 54 41 57 41 56 e8 1a 6f 37 02 48 83 c4 20 90 <0f> 0b 0f 1f 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 RSP: 0018:ffffc90002ddf638 EFLAGS: 00010282 RAX: 0000000000000086 RBX: dffffc0000000000 RCX: 7a24750e538ff600 RDX: 0000000000000000 RSI: 0000000000000201 RDI: 0000000000000000 RBP: ffff888034a86650 R08: ffffffff8174b13c R09: 1ffff920005bbe60 R10: dffffc0000000000 R11: fffff520005bbe61 R12: 0000000000000140 R13: ffff88802824a400 R14: ffff88802824a3fe R15: 0000000000000016 FS: 00007f2a5990d740(0000) GS:ffff8880b8700000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000110c2631fd CR3: 0000000029504000 CR4: 00000000003526f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> skb_push+0xe5/0x100 net/core/skbuff.c:2636 nr_header+0x36/0x320 net/netrom/nr_dev.c:69 dev_hard_header include/linux/netdevice.h:3148 [inline] vlan_dev_hard_header+0x359/0x480 net/8021q/vlan_dev.c:83 dev_hard_header include/linux/netdevice.h:3148 [inline] lapbeth_data_transmit+0x1f6/0x2a0 drivers/net/wan/lapbether.c:257 lapb_data_transmit+0x91/0xb0 net/lapb/lapb_iface.c:447 lapb_transmit_buffer+0x168/0x1f0 net/lapb/lapb_out.c:149 lapb_establish_data_link+0x84/0xd0 lapb_device_event+0x4e0/0x670 notifier_call_chain+0x19f/0x3e0 kernel/notifier.c:93 __dev_notify_flags+0x207/0x400 dev_change_flags+0xf0/0x1a0 net/core/dev.c:8922 devinet_ioctl+0xa4e/0x1aa0 net/ipv4/devinet.c:1188 inet_ioctl+0x3d7/0x4f0 net/ipv4/af_inet.c:1003 sock_do_ioctl+0x158/0x460 net/socket.c:1227 sock_ioctl+0x626/0x8e0 net/socket.c:1346 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:907 [inline] __se_sys_ioctl+0xf9/0x170 fs/ioctl.c:893 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83