CVE Database

An origin validation vulnerability in the Apex One/SEP agent could allow a local attacker to escalate privileges on affected installations. This is similar to CVE-2026-45206 but exists in a different process protection communication mechanism. Please note: an attacker must first obtain the ability to execute low-privileged code on the target system in order to exploit this vulnerability.

An origin validation vulnerability in the Apex One/SEP agent could allow a local attacker to escalate privileges on affected installations. This is similar to CVE-2026-45207 but exists in a different process protection communication mechanism. Please note: an attacker must first obtain the ability to execute low-privileged code on the target system in order to exploit this vulnerability.

An origin validation vulnerability in the Apex One/SEP agent could allow a local attacker to escalate privileges on affected installations. This is similar to CVE-2026-34927 but exists in a different process protection mechanism. Please note: an attacker must first obtain the ability to execute low-privileged code on the target system in order to exploit this vulnerability.

An origin validation vulnerability in the Apex One/SEP agent could allow a local attacker to escalate privileges on affected installations. This is similar to CVE-2026-34927 but exists in a different inter-process communication mechanism. Please note: an attacker must first obtain the ability to execute low-privileged code on the target system in order to exploit this vulnerability.

An origin validation vulnerability in the Apex One/SEP agent could allow a local attacker to escalate privileges on affected installations. This is similar to CVE-2026-34927 but exists in a different named pipe communication mechanism. Please note: an attacker must first obtain the ability to execute low-privileged code on the target system in order to exploit this vulnerability.

An origin validation vulnerability in the Apex One/SEP agent could allow a local attacker to escalate privileges on affected installations. Please note: an attacker must first obtain the ability to execute low-privileged code on the target system in order to exploit this vulnerability.

A directory traversal vulnerability in the Apex One (on-premise) server could allow a pre-authenticated local attacker to modify a key table on the server to inject malicious code to deploy to agents on affected installations. This vulnerability is only exploitable on the on-premise version of Apex One and a potential attacker must have access to the Apex One Server and already obtained administrative credentials to the server via some other method to exploit this vulnerability.

Zohocorp ManageEngine ADSelfService Plus version before 6525, DataSecurity Plus before 6264 and RecoveryManager Plus before 6313 are vulnerable to Authenticated Remote code execution in the agent machines due to the bug in the 3rd party dependency.

An origin validation error vulnerability in the Trend Micro Apex One (mac) agent self-protection mechanism could allow a local attacker to escalate privileges on affected installations. Please note: an attacker must first obtain the ability to execute low-privileged code on the target system in order to exploit this vulnerability. The following information is provided as informational only for CVE references, as these were addressed already via ActiveUpdate/SaaS updates in mid to late 2025 (SaaS 2507 & 2005 Yearly Release).

A time-of-check time-of-use vulnerability in the Trend Micro Apex One (mac) agent cache mechanism could allow a local attacker to escalate privileges on affected installations. Please note: an attacker must first obtain the ability to execute low-privileged code on the target system in order to exploit this vulnerability. The following information is provided as informational only for CVE references, as these were addressed already via ActiveUpdate/SaaS updates in mid to late 2025 (SaaS 2507 & 2005 Yearly Release).

A time-of-check time-of-use vulnerability in the Trend Micro Apex One (mac) agent iCore service signature verification could allow a local attacker to escalate privileges on affected installations. Please note: an attacker must first obtain the ability to execute low-privileged code on the target system in order to exploit this vulnerability. The following information is provided as informational only for CVE references, as these were addressed already via ActiveUpdate/SaaS updates in mid to late 2025 (SaaS 2507 & 2005 Yearly Release).

An origin validation error vulnerability in the Trend Micro Apex One (mac) agent iCore service could allow a local attacker to escalate privileges on affected installations. Please note: an attacker must first obtain the ability to execute low-privileged code on the target system in order to exploit this vulnerability. The following information is provided as informational only for CVE references, as these were addressed already via ActiveUpdate/SaaS updates in mid to late 2025 (SaaS 2507 & 2005 Yearly Release).

An origin validation error vulnerability in Trend Micro Apex One could allow a local attacker to escalate privileges on affected installations. Please note: an attacker must first obtain the ability to execute low-privileged code on the target system in order to exploit this vulnerability.

A link following vulnerability in the Trend Micro Apex One scan engine could allow a local attacker to escalate privileges on affected installations. Please note: an attacker must first obtain the ability to execute low-privileged code on the target system in order to exploit this vulnerability.

A vulnerability in the Trend Micro Apex One management console could allow a remote attacker to upload malicious code and execute commands on affected installations. This vulnerability is similar in scope to CVE-2025-71210 but affects a different executable. Please note: although this vulnerability carries a technical critical CVSS rating, this was reported via responsible disclosure via a researcher through the Zero Day Initiative. The SaaS versions of the product have already been mitigated and no customer action required. For this particular vulnerability, an attacker must have access to the Trend Micro Apex One Management Console, so customers that have their console�s IP address exposed externally should consider mitigating factors such as source restrictions if not already applied.

A vulnerability in the Trend Micro Apex One management console could allow a remote attacker to upload malicious code and execute commands on affected installations. Please note: although this vulnerability carries a technical critical CVSS rating, this was reported via responsible disclosure via a researcher through the Zero Day Initiative. The SaaS versions of the product have already been mitigated and no customer action required. For this particular vulnerability, an attacker must have access to the Trend Micro Apex One Management Console, so customers that have their console�s IP address exposed externally should consider mitigating factors such as source restrictions if not already applied.

Authorization bypass through User-Controlled key vulnerability in PosCube Hardware Software and Consulting Ltd. QR Menu allows Exploitation of Trusted Identifiers. This issue affects QR Menu: through 21052026. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

Exposure of private personal information to an unauthorized actor, Insufficiently Protected Credentials vulnerability in Digital Operations Services Inc. WifiBurada allows Authentication Bypass. This issue affects WifiBurada: through 21052026. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

Request Tracker is vulnerable to a reflected cross-site scripting (XSS) vulnerability via the "Page" parameter in GET requests. An attacker can craft a URL that, when opened, results in arbitrary JavaScript execution in the victim’s browser. This vulnerability affects versions from 5.0.4 up to 5.0.9 and from 6.0.0 up to 6.0.2.

The Divi Form Builder plugin for WordPress is vulnerable to privilege escalation in versions up to, and including, 5.1.2. This is due to the plugin accepting a user-controlled 'role' parameter from POST data during user registration without validating it against the form's configured default_user_role setting. This makes it possible for unauthenticated attackers to create administrator accounts by tampering with the role parameter during registration.

(Externally Controlled Reference to a Resource in Another Sphere), (Authorization Bypass Through User-Controlled Key) vulnerability in Apache Camel K. Authorized users in a Kubernetes namespace can create a Build resource, controlling the Pod generation in a namespace of their choice, including the operator namespace. This issue affects Apache Camel K: from 2.0.0 before 2.8.1, from 2.9.0 before 2.9.2, from 2.10.0 before 2.10.1. Users are recommended to upgrade to version 2.10.1 (or 2.8.1 or 2.9.2), which fixes the issue.

In the Linux kernel, the following vulnerability has been resolved: net/rds: handle zerocopy send cleanup before the message is queued A zerocopy send can fail after user pages have been pinned but before the message is attached to the sending socket. The purge path currently infers zerocopy state from rm->m_rs, so an unqueued message can be cleaned up as if it owned normal payload pages. However, zerocopy ownership is really determined by the presence of op_mmp_znotifier, regardless of whether the message has reached the socket queue. Capture op_mmp_znotifier up front in rds_message_purge() and use it as the cleanup discriminator. If the message is already associated with a socket, keep the existing completion path. Otherwise, drop the pinned page accounting directly and release the notifier before putting the payload pages. This keeps early send failure cleanup consistent with the zerocopy lifetime rules without changing the normal queued completion path.

In the Linux kernel, the following vulnerability has been resolved: ipv6: rpl: reserve mac_len headroom when recompressed SRH grows ipv6_rpl_srh_rcv() decompresses an RFC 6554 Source Routing Header, swaps the next segment into ipv6_hdr->daddr, recompresses, then pulls the old header and pushes the new one plus the IPv6 header back. The recompressed header can be larger than the received one when the swap reduces the common-prefix length the segments share with daddr (CmprI=0, CmprE>0, seg[0][0] != daddr[0] gives the maximum +8 bytes). pskb_expand_head() was gated on segments_left == 0, so on earlier segments the push consumed unchecked headroom. Once skb_push() leaves fewer than skb->mac_len bytes in front of data, skb_mac_header_rebuild()'s call to: skb_set_mac_header(skb, -skb->mac_len); will store (data - head) - mac_len into the u16 mac_header field, which wraps to ~65530, and the following memmove() writes mac_len bytes ~64KiB past skb->head. A single AF_INET6/SOCK_RAW/IPV6_HDRINCL packet over lo with a two segment type-3 SRH (CmprI=0, CmprE=15) reaches headroom 8 after one pass; KASAN reports a 14-byte OOB write in ipv6_rthdr_rcv. Fix this by expanding the head whenever the remaining room is less than the push size plus mac_len, and request that much extra so the rebuilt MAC header fits afterwards.

In the Linux kernel, the following vulnerability has been resolved: rtmutex: Use waiter::task instead of current in remove_waiter() remove_waiter() is used by the slowlock paths, but it is also used for proxy-lock rollback in rt_mutex_start_proxy_lock() when invoked from futex_requeue(). In the latter case waiter::task is not current, but remove_waiter() operates on current for the dequeue operation. That results in several problems: 1) the rbtree dequeue happens without waiter::task::pi_lock being held 2) the waiter task's pi_blocked_on state is not cleared, which leaves a dangling pointer primed for UAF around. 3) rt_mutex_adjust_prio_chain() operates on the wrong top priority waiter task Use waiter::task instead of current in all related operations in remove_waiter() to cure those problems. [ tglx: Fixup rt_mutex_adjust_prio_chain(), add a comment and amend the changelog ]

In the Linux kernel, the following vulnerability has been resolved: accel/ivpu: Disallow re-exporting imported GEM objects Prevent re-exporting of imported GEM buffers by adding a custom prime_handle_to_fd callback that checks if the object is imported and returns -EOPNOTSUPP if so. Re-exporting imported GEM buffers causes loss of buffer flags settings, leading to incorrect device access and data corruption.

In the Linux kernel, the following vulnerability has been resolved: fbdev: udlfb: add vm_ops to dlfb_ops_mmap to prevent use-after-free dlfb_ops_mmap() uses remap_pfn_range() to map vmalloc framebuffer pages to userspace but sets no vm_ops on the VMA. This means the kernel cannot track active mmaps. When dlfb_realloc_framebuffer() replaces the backing buffer via FBIOPUT_VSCREENINFO, existing mmap PTEs are not invalidated. On USB disconnect, dlfb_ops_destroy() calls vfree() on the old pages while userspace PTEs still reference them, resulting in a use-after-free: the process retains read/write access to freed kernel pages. Add vm_operations_struct with open/close callbacks that maintain an atomic mmap_count on struct dlfb_data. In dlfb_realloc_framebuffer(), check mmap_count and return -EBUSY if the buffer is currently mapped, preventing buffer replacement while userspace holds stale PTEs. Tested with PoC using dummy_hcd + raw_gadget USB device emulation.

In the Linux kernel, the following vulnerability has been resolved: net/sched: sch_red: Replace direct dequeue call with peek and qdisc_dequeue_peeked When red qdisc has children (eg qfq qdisc) whose peek() callback is qdisc_peek_dequeued(), we could get a kernel panic. When the parent of such qdiscs (eg illustrated in patch #3 as tbf) wants to retrieve an skb from its child (red in this case), it will do the following: 1a. do a peek() - and when sensing there's an skb the child can offer, then - the child in this case(red) calls its child's (qfq) peek. qfq does the right thing and will return the gso_skb queue packet. Note: if there wasnt a gso_skb entry then qfq will store it there. 1b. invoke a dequeue() on the child (red). And herein lies the problem. - red will call the child's dequeue() which will essentially just try to grab something of qfq's queue. [ 78.667668][ T363] KASAN: null-ptr-deref in range [0x0000000000000048-0x000000000000004f] [ 78.667927][ T363] CPU: 1 UID: 0 PID: 363 Comm: ping Not tainted 7.1.0-rc1-00033-g46f74a3f7d57-dirty #790 PREEMPT(full) [ 78.668263][ T363] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 78.668486][ T363] RIP: 0010:qfq_dequeue+0x446/0xc90 [sch_qfq] [ 78.668718][ T363] Code: 54 c0 e8 dd 90 00 f1 48 c7 c7 e0 03 54 c0 48 89 de e8 ce 90 00 f1 48 8d 7b 48 b8 ff ff 37 00 48 89 fa 48 c1 e0 2a 48 c1 ea 03 <80> 3c 02 00 74 05 e8 ef a1 e1 f1 48 8b 7b 48 48 8d 54 24 58 48 8d [ 78.669312][ T363] RSP: 0018:ffff88810de573e0 EFLAGS: 00010216 [ 78.669533][ T363] RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000000 [ 78.669790][ T363] RDX: 0000000000000009 RSI: 0000000000000004 RDI: 0000000000000048 [ 78.670044][ T363] RBP: ffff888110dc4000 R08: ffffffffb1b0885a R09: fffffbfff6ba9078 [ 78.670297][ T363] R10: 0000000000000003 R11: ffff888110e31c80 R12: 0000001880000000 [ 78.670560][ T363] R13: ffff888110dc4150 R14: ffff888110dc42b8 R15: 0000000000000200 [ 78.670814][ T363] FS: 00007f66a8f09c40(0000) GS:ffff888163428000(0000) knlGS:0000000000000000 [ 78.671110][ T363] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 78.671324][ T363] CR2: 000055db4c6a30a8 CR3: 000000010da67000 CR4: 0000000000750ef0 [ 78.671585][ T363] PKRU: 55555554 [ 78.671713][ T363] Call Trace: [ 78.671843][ T363] <TASK> [ 78.671936][ T363] ? __pfx_qfq_dequeue+0x10/0x10 [sch_qfq] [ 78.672148][ T363] ? __pfx__printk+0x10/0x10 [ 78.672322][ T363] ? srso_alias_return_thunk+0x5/0xfbef5 [ 78.672496][ T363] ? lockdep_hardirqs_on_prepare+0xa8/0x1a0 [ 78.672706][ T363] ? srso_alias_return_thunk+0x5/0xfbef5 [ 78.672875][ T363] ? trace_hardirqs_on+0x19/0x1a0 [ 78.673047][ T363] red_dequeue+0x65/0x270 [sch_red] [ 78.673217][ T363] ? srso_alias_return_thunk+0x5/0xfbef5 [ 78.673385][ T363] tbf_dequeue.cold+0xb0/0x70c [sch_tbf] [ 78.673566][ T363] __qdisc_run+0x169/0x1900 The right thing to do in #1b is to grab the skb off gso_skb queue. This patchset fixes that issue by changing #1b to use qdisc_dequeue_peeked() method instead.

In the Linux kernel, the following vulnerability has been resolved: net: wwan: t7xx: validate port_count against message length in t7xx_port_enum_msg_handler t7xx_port_enum_msg_handler() uses the modem-supplied port_count field as a loop bound over port_msg->data[] without checking that the message buffer contains sufficient data. A modem sending port_count=65535 in a 12-byte buffer triggers a slab-out-of-bounds read of up to 262140 bytes. Add a sizeof(*port_msg) check before accessing the port message header fields to guard against undersized messages. Add a struct_size() check after extracting port_count and before the loop. In t7xx_parse_host_rt_data(), guard the rt_feature header read with a remaining-buffer check before accessing data_len, validate feat_data_len against the actual remaining buffer to prevent OOB reads and signed integer overflow on offset. Pass msg_len from both call sites: skb->len at the DPMAIF path after skb_pull(), and the validated feat_data_len at the handshake path.

In the Linux kernel, the following vulnerability has been resolved: net/rds: reset op_nents when zerocopy page pin fails When iov_iter_get_pages2() fails in rds_message_zcopy_from_user(), the pinned pages are released with put_page(), and rm->data.op_mmp_znotifier is cleared. But we fail to properly clear rm->data.op_nents. Later when rds_message_purge() is called from rds_sendmsg() the cleanup loop iterates over the incorrectly non zero number of op_nents and frees them again. Fix this by properly resetting op_nents when it should be in rds_message_zcopy_from_user().

The affected product may expose credentials remotely between low privileged visualization users during concurrent login operations due to insufficient isolation of authentication data. The vulnerability affects only login operations within an active visualization session.