CVE Database

Three OS command injection vulnerabilities exist in the web interface I/O configuration functionality of MC Technologies MC LR Router 2.10.5. A specially crafted HTTP request can lead to arbitrary command execution. An attacker can make an authenticated HTTP request to trigger these vulnerabilities.This vulnerability refers to the authenticated OS Command Injection that occurs through the attacker-controlled `btn1` parameter, at offset `0x8eb0`.

An OS command injection vulnerability exists in the web interface configuration upload functionality of MC Technologies MC LR Router 2.10.5. A specially crafted HTTP request can lead to arbitrary command execution. An attacker can make an authenticated HTTP request to trigger this vulnerability.

A vulnerability has been found in 1000 Projects Beauty Parlour Management System 1.0 and classified as critical. This vulnerability affects unknown code of the file /admin/about-us.php. The manipulation of the argument pagetitle leads to sql injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used.

Improper Neutralization of Special Elements used in an SQL Command ('SQL Injection') vulnerability in Teknogis Informatics Closed Circuit Vehicle Tracking Software allows SQL Injection, Blind SQL Injection. This issue affects Closed Circuit Vehicle Tracking Software: through 21.11.2024. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability, which was classified as critical, was found in 1000 Projects Beauty Parlour Management System 1.0. This affects an unknown part of the file /admin/add-services.php. The manipulation of the argument sername leads to sql injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used.

A vulnerability, which was classified as critical, has been found in 1000 Projects Bookstore Management System 1.0. Affected by this issue is some unknown functionality of the file /forget_password_process.php. The manipulation of the argument unm leads to sql injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used.

A command injection vulnerability in Brocade Fabric OS before 9.2.0c, and 9.2.1 through 9.2.1a on IP extension platforms could allow a local authenticated attacker to perform a privileged escalation via crafted use of the portcfg command. This specific exploitation is only possible on IP Extension platforms: Brocade 7810, Brocade 7840, Brocade 7850 and on Brocade X6 or X7 directors with an SX-6 Extension blade installed. The attacker must be logged into the switch via SSH or serial console to conduct the attack.

ECMP dissector crash in Wireshark 4.4.0 to 4.4.1 and 4.2.0 to 4.2.8 allows denial of service via packet injection or crafted capture file

FiveCo RAP dissector infinite loop in Wireshark 4.4.0 to 4.4.1 and 4.2.0 to 4.2.8 allows denial of service via packet injection or crafted capture file

The Grid View Gallery plugin for WordPress is vulnerable to PHP Object Injection in all versions up to, and including, 1.0 via deserialization of untrusted input from cs_all_photos_details parameter. This makes it possible for authenticated attackers, with Editor-level access and above, to inject a PHP Object. No known POP chain is present in the vulnerable software. If a POP chain is present via an additional plugin or theme installed on the target system, it could allow the attacker to delete arbitrary files, retrieve sensitive data, or execute code.

The Contact Form 7 Email Add on plugin for WordPress is vulnerable to Local File Inclusion in all versions up to, and including, 1.9 via the cf7_email_add_on_add_admin_template() function. This makes it possible for authenticated attackers, with Contributor-level access and above, to include and execute arbitrary PHP files on the server, allowing the execution of any PHP code in those files. This can be used to bypass access controls, obtain sensitive data, or achieve code execution in cases where php files can be uploaded and included.

The Activity Log – Monitor & Record User Changes plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the event parameters in all versions up to, and including, 2.11.1 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever an administrative user accesses an injected page.

Brocade Fabric OS versions before 8.2.3e2, versions 9.0.0 through 9.2.0c, and 9.2.1 through 9.2.1a can capture the SFTP/FTP server password used for a firmware download operation initiated by SANnav or through WebEM in a weblinker core dump that is later captured via supportsave.

The Tutor LMS plugin for WordPress is vulnerable to SQL Injection via the ‘rating_filter’ parameter in all versions up to, and including, 2.7.6 due to insufficient escaping on the user supplied parameter and lack of sufficient preparation on the existing SQL query. This makes it possible for unauthenticated attackers to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database.

Okta Privileged Access server agent (SFTD) versions 1.82.0 to 1.84.0 are affected by a privilege escalation vulnerability when the sudo command bundles feature is enabled. To remediate this vulnerability, upgrade the Okta Privileged Access server agent (SFTD) to version 1.87.1 or greater.

Litestar is an Asynchronous Server Gateway Interface (ASGI) framework. Prior to version 2.13.0, the multipart form parser shipped with litestar expects the entire request body as a single byte string and there is no default limit for the total size of the request body. This allows an attacker to upload arbitrary large files wrapped in a `multipart/form-data` request and cause excessive memory consumption on the server. The multipart form parser in affected versions is vulnerable to this type of attack by design. The public method signature as well as its implementation both expect the entire request body to be available as a single byte string. It is not possible to accept large file uploads in a safe way using this parser. This may be a regression, as a variation of this issue was already reported in CVE-2023-25578. Limiting the part number is not sufficient to prevent out-of-memory errors on the server. A patch is available in version 2.13.0.

An issue was discovered in MBed OS 6.16.0. Its hci parsing software dynamically determines the length of certain hci packets by reading a byte from its header. Certain events cause a callback, the logic for which allocates a buffer (the length of which is determined by looking up the event type in a table). The subsequent write operation, however, copies the amount of data specified in the packet header, which may lead to a buffer overflow. This bug is trivial to exploit for a denial of service but is not certain to suffice to bring the system down and can generally not be exploited further because the exploitable buffer is dynamically allocated.

An issue was discovered in MBed OS 6.16.0. Its hci parsing software dynamically determines the length of certain hci packets by reading a byte from its header. This value is assumed to be greater than or equal to 3, but the software doesn't ensure that this is the case. Supplying a length less than 3 leads to a buffer overflow in a buffer that is allocated later. It is simultaneously possible to cause another integer overflow by supplying large length values because the provided length value is increased by a few bytes to account for additional information that is supposed to be stored there. This bug is trivial to exploit for a denial of service but is not certain to suffice to bring the system down and can generally not be exploited further because the exploitable buffer is dynamically allocated.

Incorrect access control in eSoft Planner 3.24.08271-USA allow attackers to view all transactions performed by the company via supplying a crafted web request.

An issue in the Instructor Appointment Availability module of eSoft Planner 3.24.08271-USA allows attackers to cause a Denial of Service (DoS) via a crafted POST request.

An issue was discovered in MBed OS 6.16.0. During processing of HCI packets, the software dynamically determines the length of the packet data by reading 2 bytes from the packet data. A buffer is then allocated to contain the entire packet, the size of which is calculated as the length of the packet body determined earlier and the header length. If the allocate fails because the specified packet is too large, no exception handling occurs and hciTrSerialRxIncoming continues to write bytes into the 4-byte large temporary header buffer, leading to a buffer overflow. This can be leveraged into an arbitrary write by an attacker. It is possible to overwrite the pointer to the buffer that is supposed to receive the contents of the packet body but which couldn't be allocated. One can then overwrite the state variable used by the function to determine which step of the parsing process is currently being executed. This advances the function to the next state, where it proceeds to copy data to that arbitrary location. The packet body is then written wherever the corrupted data pointer is pointing.

An issue was discovered in MBed OS 6.16.0. During processing of HCI packets, the software dynamically determines the length of the packet data by reading 2 bytes from the packet header. A buffer is then allocated to contain the entire packet, the size of which is calculated as the length of the packet body determined earlier plus the header length. WsfMsgAlloc then increments this again by sizeof(wsfMsg_t). This may cause an integer overflow that results in the buffer being significantly too small to contain the entire packet. This may cause a buffer overflow of up to 65 KB . This bug is trivial to exploit for a denial of service but can generally not be exploited further because the exploitable buffer is dynamically allocated.

An issue was discovered in MBed OS 6.16.0. During processing of HCI packets, the software dynamically determines the length of the packet header by looking up the identifying first byte and matching it against a table of possible lengths. The initial parsing function, hciTrSerialRxIncoming does not drop packets with invalid identifiers but also does not set a safe default for the length of unknown packets' headers, leading to a buffer overflow. This can be leveraged into an arbitrary write by an attacker. It is possible to overwrite the pointer to a not-yet-allocated buffer that is supposed to receive the contents of the packet body. One can then overwrite the state variable used by the function to determine which state of packet parsing is currently occurring. Because the buffer is allocated when the last byte of the header has been copied, the combination of having a bad header length variable that will never match the counter variable and being able to overwrite the state variable with the resulting buffer overflow can be used to advance the function to the next step while skipping the buffer allocation and resulting pointer write. The next 16 bytes from the packet body are then written wherever the corrupted data pointer is pointing.

D-LINK DI-8400 v16.07.26A1 was discovered to contain multiple remote command execution (RCE) vulnerabilities in the msp_info_htm function via the flag and cmd parameters.

In l2cu_send_peer_config_rej of l2c_utils.cc, there is a possible out of bounds read due to a missing bounds check. This could lead to remote information disclosure with no additional execution privileges needed. User interaction is not needed for exploitation.

In the development options section of the Settings app, there is a possible authentication bypass due to a missing permission check. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is needed for exploitation.

In HeadsetInterface::ClccResponse of btif_hf.cc, there is a possible out of bounds stack write due to a missing bounds check. This could lead to remote escalation of privilege via Bluetooth, if the recipient has enabled SIP calls with no additional execution privileges needed. User interaction is not needed for exploitation.

In writeToParcel of MediaPlayer.java, there is a possible serialization/deserialization mismatch due to improper input validation. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation.

In xmlMemStrdupLoc of xmlmemory.c, there is a possible out-of-bounds write due to an integer overflow. This could lead to remote code execution in an unprivileged process with no additional execution privileges needed. User interaction is needed for exploitation.

In the deserialization constructor of NanoAppFilter.java, there is a possible loss of data due to type confusion. This could lead to local escalation of privilege in the system server with no additional execution privileges needed. User interaction is not needed for exploitation.