CVE Database

in OpenHarmony v4.1.1 and prior versions allow a local attacker cause the common permission is upgraded to root through use after free.

Dell NetWorker Management Console, version(s) 19.11, contain(s) an Improper Verification of Cryptographic Signature vulnerability. An unauthenticated attacker with local access could potentially exploit this vulnerability, leading to Code execution.

Improper authentication of an HTTP endpoint in the S3 Gateway of Apache Ozone 1.4.0 allows any authenticated Kerberos user to revoke and regenerate the S3 secrets of any other user. This is only possible if: * ozone.s3g.secret.http.enabled is set to true. The default value of this configuration is false. * The user configured in ozone.s3g.kerberos.principal is also configured in ozone.s3.administrators or ozone.administrators. Users are recommended to upgrade to Apache Ozone version 1.4.1 which disables the affected endpoint.

Improper handling of responses in GamingHub prior to version 6.1.04.6 in Korea, 7.1.03.7 in Global allows remote attackers to launch arbitrary activity.

Out-of-bound write in libsaped.so prior to SMR Dec-2024 Release 1 allows remote attackers to execute arbitrary code.

Improper Verification of Cryptographic Signature in SmartSwitch prior to SMR Dec-2024 Release 1 allows local attackers to install malicious applications.

Authentication credentials leakage vulnerability in Hitachi Ops Center Common Services within Hitachi Ops Center OVA. This issue affects Hitachi Ops Center Common Services: from 10.9.3-00 before 11.0.3-00; Hitachi Ops Center OVA: from 10.9.3-00 before 11.0.2-01.

A post-authentication command injection vulnerability in the "host" parameter of the diagnostic function in Zyxel VMG4005-B50A firmware versions through V5.15(ABQA.2.2)C0 could allow an authenticated attacker with administrator privileges to execute operating system (OS) commands on a vulnerable device.

A buffer overflow vulnerability in the packet parser of the third-party library "libclinkc" in Zyxel VMG8825-T50K firmware versions through V5.50(ABOM.8.4)C0 could allow an attacker to cause a temporary denial of service (DoS) condition against the web management interface by sending a crafted HTTP POST request to a vulnerable device.

An issue was discovered on Victure RX1800 WiFi 6 Router (software EN_V1.0.0_r12_110933, hardware 1.0) devices. The TELNET service is enabled by default with admin/admin as default credentials and is exposed over the LAN. The allows attackers to execute arbitrary commands with root-level permissions. Device setup does not require this password to be changed during setup in order to utilize the device. (However, the TELNET password is dictated by the current GUI password.)

An issue was discovered in Victure RX1800 WiFi 6 Router (software EN_V1.0.0_r12_110933, hardware 1.0) devices. A remote attacker (in proximity to a Wi-Fi network) can derive the default Wi-Fi PSK value via the last 4 octets of the BSSID.

An issue was discovered in Victure RX1800 WiFi 6 Router (software EN_V1.0.0_r12_110933, hardware 1.0) devices. Certain /cgi-bin/luci/admin endpoints are vulnerable to command injection. Attackers can exploit this by sending crafted payloads through parameters intended for the ping utility, enabling arbitrary command execution with root-level permissions on the device.

An issue was discovered in Victure RX1800 WiFi 6 Router (software EN_V1.0.0_r12_110933, hardware 1.0) devices. The /cgi-bin/luci/admin/opsw/Dual_freq_un_apple endpoint is vulnerable to command injection through the 2.4 GHz and 5 GHz name parameters, allowing an attacker to execute arbitrary commands on the device (with root-level permissions) via crafted input.

An issue was discovered in Victure RX1800 WiFi 6 Router (software EN_V1.0.0_r12_110933, hardware 1.0) devices. The TELNET service is enabled by default and exposed over the LAN. The root account is accessible without a password, allowing attackers to achieve full control over the router remotely without any authentication.

An Authenticated Remote Code Execution (RCE) vulnerability affects the TP-Link Archer router series. A vulnerability exists in the "tmp_get_sites" function of the HomeShield functionality provided by TP-Link. This vulnerability is still exploitable without the activation of the HomeShield functionality.

In OSUInfo of OSUInfo.java, there is a possible escalation of privilege due to improper input validation. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation.

In  RsaKeyPairGenerator::getNumberOfIterations of RSAKeyPairGenerator.java, an incorrect implementation could cause weak RSA key pairs being generated. This could lead to crypto vulnerability with no additional execution privileges needed. User interaction is not needed for exploitation. Bulletin Fix: The fix is designed to correctly implement the key generation according to FIPS standard.

An issue was discovered in Samsung Mobile Processor, Wearable Processor, and Modem Exynos 9820, 9825, 980, 990, 850, 1080, 2100, 1280, 2200, 1330, 1380, 1480, 2400, 9110, W920, W930, W1000, Modem 5123, Modem 5300. The baseband software does not properly check the length specified by the CC (Call Control). This can lead to an Out-of-Bounds write.

In gattServerSendResponseNative of com_android_bluetooth_gatt.cpp, there is a possible out of bounds stack write due to a missing bounds check. This could lead to local escalation of privilege with User execution privileges needed. User interaction is not needed for exploitation.

In handle_notification_response of btif_rc.cc, there is a possible out of bounds write due to a missing bounds check. This could lead to remote code execution with no additional execution privileges needed. User interaction is needed for exploitation.

An issue was discovered in Samsung Mobile Processor and Wearable Processor Exynos 2100, 1280, 2200, 1330, 1380, 1480, 2400, 9110, Modem 5123, and Modem 5300. The baseband software does not properly check the length specified by the MM (Mobility Management) module, which can lead to Denial of Service.

In gatts_process_read_by_type_req of gatt_sr.c, there is a possible information disclosure due to uninitialized data. This could lead to remote information disclosure with no additional execution privileges needed. User interaction is not needed for exploitation.

In l2c_lcc_proc_pdu of l2c_fcr.cc, there is a possible out of bounds write due to improper input validation. This could lead to remote escalation of privilege with no additional execution privileges needed. User interaction is needed for exploitation.

Ever Traduora 0.20.0 and below is vulnerable to Privilege Escalation due to the use of a hard-coded JWT signing key.

SimpleSAMLphp SAML2 library is a PHP library for SAML2 related functionality. When loading an (untrusted) XML document, for example the SAMLResponse, it's possible to induce an XXE. This vulnerability is fixed in 4.6.14 and 5.0.0-alpha.18.

python-multipart is a streaming multipart parser for Python. When parsing form data, python-multipart skips line breaks (CR \r or LF \n) in front of the first boundary and any tailing bytes after the last boundary. This happens one byte at a time and emits a log event each time, which may cause excessive logging for certain inputs. An attacker could abuse this by sending a malicious request with lots of data before the first or after the last boundary, causing high CPU load and stalling the processing thread for a significant amount of time. In case of ASGI application, this could stall the event loop and prevent other requests from being processed, resulting in a denial of service (DoS). This vulnerability is fixed in 0.0.18.

Argo Workflows is an open source container-native workflow engine for orchestrating parallel jobs on Kubernetes. When using `--auth-mode=client`, Archived Workflows can be retrieved with a fake or spoofed token via the GET Workflow endpoint: `/api/v1/workflows/{namespace}/{name}` or when using `--auth-mode=sso`, all Archived Workflows can be retrieved with a valid token via the GET Workflow endpoint: `/api/v1/workflows/{namespace}/{name}`. No authentication is performed by the Server itself on `client` tokens. Authentication & authorization is instead delegated to the k8s API server. However, the Workflow Archive does not interact with k8s, and so any token that looks valid will be considered authenticated, even if it is not a k8s token or even if the token has no RBAC for Argo. To handle the lack of pass-through k8s authN/authZ, the Workflow Archive specifically does the equivalent of a `kubectl auth can-i` check for respective methods. In 3.5.7 and 3.5.8, the auth check was accidentally removed on the GET Workflow endpoint's fallback to archived workflows on these lines, allowing archived workflows to be retrieved with a fake token. This vulnerability is fixed in 3.6.2 and 3.5.13.

In WhatsUp Gold versions released before 2024.0.1, a SQL Injection vulnerability allows an authenticated low-privileged user (at least Report Viewer permissions required) to achieve privilege escalation to the admin account.

In WhatsUp Gold versions released before 2024.0.1, a SQL Injection vulnerability allows an authenticated low-privileged user (at least Report Viewer permissions required) to achieve privilege escalation to the admin account.

In WhatsUp Gold versions released before 2024.0.1, a SQL Injection vulnerability allows an authenticated low-privileged user (at least Report Viewer permissions required) to achieve privilege escalation to the admin account.