CVE Database

In the Linux kernel, the following vulnerability has been resolved: igc: avoid kernel warning when changing RX ring parameters Calling ethtool changing the RX ring parameters like this: $ ethtool -G eth0 rx 1024 on igc triggers kernel warnings like this: [ 225.198467] ------------[ cut here ]------------ [ 225.198473] Missing unregister, handled but fix driver [ 225.198485] WARNING: CPU: 7 PID: 959 at net/core/xdp.c:168 xdp_rxq_info_reg+0x79/0xd0 [...] [ 225.198601] Call Trace: [ 225.198604] <TASK> [ 225.198609] igc_setup_rx_resources+0x3f/0xe0 [igc] [ 225.198617] igc_ethtool_set_ringparam+0x30e/0x450 [igc] [ 225.198626] ethnl_set_rings+0x18a/0x250 [ 225.198631] genl_family_rcv_msg_doit+0xca/0x110 [ 225.198637] genl_rcv_msg+0xce/0x1c0 [ 225.198640] ? rings_prepare_data+0x60/0x60 [ 225.198644] ? genl_get_cmd+0xd0/0xd0 [ 225.198647] netlink_rcv_skb+0x4e/0xf0 [ 225.198652] genl_rcv+0x24/0x40 [ 225.198655] netlink_unicast+0x20e/0x330 [ 225.198659] netlink_sendmsg+0x23f/0x480 [ 225.198663] sock_sendmsg+0x5b/0x60 [ 225.198667] __sys_sendto+0xf0/0x160 [ 225.198671] ? handle_mm_fault+0xb2/0x280 [ 225.198676] ? do_user_addr_fault+0x1eb/0x690 [ 225.198680] __x64_sys_sendto+0x20/0x30 [ 225.198683] do_syscall_64+0x38/0x90 [ 225.198687] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 225.198693] RIP: 0033:0x7f7ae38ac3aa igc_ethtool_set_ringparam() copies the igc_ring structure but neglects to reset the xdp_rxq_info member before calling igc_setup_rx_resources(). This in turn calls xdp_rxq_info_reg() with an already registered xdp_rxq_info. Make sure to unregister the xdp_rxq_info structure first in igc_setup_rx_resources.

In the Linux kernel, the following vulnerability has been resolved: net: asix: add proper error handling of usb read errors Syzbot once again hit uninit value in asix driver. The problem still the same -- asix_read_cmd() reads less bytes, than was requested by caller. Since all read requests are performed via asix_read_cmd() let's catch usb related error there and add __must_check notation to be sure all callers actually check return value. So, this patch adds sanity check inside asix_read_cmd(), that simply checks if bytes read are not less, than was requested and adds missing error handling of asix_read_cmd() all across the driver code.

In the Linux kernel, the following vulnerability has been resolved: mt76: mt7921s: fix a possible memory leak in mt7921_load_patch Always release fw data at the end of mt7921_load_patch routine.

In the Linux kernel, the following vulnerability has been resolved: power: supply: ab8500: Fix memory leak in ab8500_fg_sysfs_init kobject_init_and_add() takes reference even when it fails. According to the doc of kobject_init_and_add()： If this function returns an error, kobject_put() must be called to properly clean up the memory associated with the object. Fix memory leak by calling kobject_put().

In the Linux kernel, the following vulnerability has been resolved: drm/bridge: anx7625: Fix overflow issue on reading EDID The length of EDID block can be longer than 256 bytes, so we should use `int` instead of `u8` for the `edid_pos` variable.

In the Linux kernel, the following vulnerability has been resolved: drm/msm/dp: populate connector of struct dp_panel DP CTS test case 4.2.2.6 has valid edid with bad checksum on purpose and expect DP source return correct checksum. During drm edid read, correct edid checksum is calculated and stored at connector::real_edid_checksum. The problem is struct dp_panel::connector never be assigned, instead the connector is stored in struct msm_dp::connector. When we run compliance testing test case 4.2.2.6 dp_panel_handle_sink_request() won't have a valid edid set in struct dp_panel::edid so we'll try to use the connectors real_edid_checksum and hit a NULL pointer dereference error because the connector pointer is never assigned. Changes in V2: -- populate panel connector at msm_dp_modeset_init() instead of at dp_panel_read_sink_caps() Changes in V3: -- remove unhelpful kernel crash trace commit text -- remove renaming dp_display parameter to dp Changes in V4: -- add more details to commit text Changes in v10: -- group into one series Changes in v11: -- drop drm/msm/dp: dp_link_parse_sink_count() return immediately if aux read Signee-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>

In the Linux kernel, the following vulnerability has been resolved: dax: make sure inodes are flushed before destroy cache A bug can be triggered by following command $ modprobe nd_pmem && modprobe -r nd_pmem [ 10.060014] BUG dax_cache (Not tainted): Objects remaining in dax_cache on __kmem_cache_shutdown() [ 10.060938] Slab 0x0000000085b729ac objects=9 used=1 fp=0x000000004f5ae469 flags=0x200000000010200(slab|head|node) [ 10.062433] Call Trace: [ 10.062673] dump_stack_lvl+0x34/0x44 [ 10.062865] slab_err+0x90/0xd0 [ 10.063619] __kmem_cache_shutdown+0x13b/0x2f0 [ 10.063848] kmem_cache_destroy+0x4a/0x110 [ 10.064058] __x64_sys_delete_module+0x265/0x300 This is caused by dax_fs_exit() not flushing inodes before destroy cache. To fix this issue, call rcu_barrier() before destroy cache.

In the Linux kernel, the following vulnerability has been resolved: vfio/pci: fix memory leak during D3hot to D0 transition If 'vfio_pci_core_device::needs_pm_restore' is set (PCI device does not have No_Soft_Reset bit set in its PMCSR config register), then the current PCI state will be saved locally in 'vfio_pci_core_device::pm_save' during D0->D3hot transition and same will be restored back during D3hot->D0 transition. For saving the PCI state locally, pci_store_saved_state() is being used and the pci_load_and_free_saved_state() will free the allocated memory. But for reset related IOCTLs, vfio driver calls PCI reset-related API's which will internally change the PCI power state back to D0. So, when the guest resumes, then it will get the current state as D0 and it will skip the call to vfio_pci_set_power_state() for changing the power state to D0 explicitly. In this case, the memory pointed by 'pm_save' will never be freed. In a malicious sequence, the state changing to D3hot followed by VFIO_DEVICE_RESET/VFIO_DEVICE_PCI_HOT_RESET can be run in a loop and it can cause an OOM situation. This patch frees the earlier allocated memory first before overwriting 'pm_save' to prevent the mentioned memory leak.

In the Linux kernel, the following vulnerability has been resolved: scsi: pm8001: Fix abort all task initialization In pm80xx_send_abort_all(), the n_elem field of the ccb used is not initialized to 0. This missing initialization sometimes lead to the task completion path seeing the ccb with a non-zero n_elem resulting in the execution of invalid dma_unmap_sg() calls in pm8001_ccb_task_free(), causing a crash such as: [ 197.676341] RIP: 0010:iommu_dma_unmap_sg+0x6d/0x280 [ 197.700204] RSP: 0018:ffff889bbcf89c88 EFLAGS: 00010012 [ 197.705485] RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffffffff83d0bda0 [ 197.712687] RDX: 0000000000000002 RSI: 0000000000000000 RDI: ffff88810dffc0d0 [ 197.719887] RBP: 0000000000000000 R08: 0000000000000000 R09: ffff8881c790098b [ 197.727089] R10: ffffed1038f20131 R11: 0000000000000001 R12: 0000000000000000 [ 197.734296] R13: ffff88810dffc0d0 R14: 0000000000000010 R15: 0000000000000000 [ 197.741493] FS: 0000000000000000(0000) GS:ffff889bbcf80000(0000) knlGS:0000000000000000 [ 197.749659] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 197.755459] CR2: 00007f16c1b42734 CR3: 0000000004814000 CR4: 0000000000350ee0 [ 197.762656] Call Trace: [ 197.765127] <IRQ> [ 197.767162] pm8001_ccb_task_free+0x5f1/0x820 [pm80xx] [ 197.772364] ? do_raw_spin_unlock+0x54/0x220 [ 197.776680] pm8001_mpi_task_abort_resp+0x2ce/0x4f0 [pm80xx] [ 197.782406] process_oq+0xe85/0x7890 [pm80xx] [ 197.786817] ? lock_acquire+0x194/0x490 [ 197.790697] ? handle_irq_event+0x10e/0x1b0 [ 197.794920] ? mpi_sata_completion+0x2d70/0x2d70 [pm80xx] [ 197.800378] ? __wake_up_bit+0x100/0x100 [ 197.804340] ? lock_is_held_type+0x98/0x110 [ 197.808565] pm80xx_chip_isr+0x94/0x130 [pm80xx] [ 197.813243] tasklet_action_common.constprop.0+0x24b/0x2f0 [ 197.818785] __do_softirq+0x1b5/0x82d [ 197.822485] ? do_raw_spin_unlock+0x54/0x220 [ 197.826799] __irq_exit_rcu+0x17e/0x1e0 [ 197.830678] irq_exit_rcu+0xa/0x20 [ 197.834114] common_interrupt+0x78/0x90 [ 197.840051] </IRQ> [ 197.844236] <TASK> [ 197.848397] asm_common_interrupt+0x1e/0x40 Avoid this issue by always initializing the ccb n_elem field to 0 in pm8001_send_abort_all(), pm8001_send_read_log() and pm80xx_send_abort_all().

In the Linux kernel, the following vulnerability has been resolved: drm/tegra: Fix reference leak in tegra_dsi_ganged_probe The reference taken by 'of_find_device_by_node()' must be released when not needed anymore. Add put_device() call to fix this.

In the Linux kernel, the following vulnerability has been resolved: powerpc/64s: Don't use DSISR for SLB faults Since commit 46ddcb3950a2 ("powerpc/mm: Show if a bad page fault on data is read or write.") we use page_fault_is_write(regs->dsisr) in __bad_page_fault() to determine if the fault is for a read or write, and change the message printed accordingly. But SLB faults, aka Data Segment Interrupts, don't set DSISR (Data Storage Interrupt Status Register) to a useful value. All ISA versions from v2.03 through v3.1 specify that the Data Segment Interrupt sets DSISR "to an undefined value". As far as I can see there's no mention of SLB faults setting DSISR in any BookIV content either. This manifests as accesses that should be a read being incorrectly reported as writes, for example, using the xmon "dump" command: 0:mon> d 0x5deadbeef0000000 5deadbeef0000000 [359526.415354][ C6] BUG: Unable to handle kernel data access on write at 0x5deadbeef0000000 [359526.415611][ C6] Faulting instruction address: 0xc00000000010a300 cpu 0x6: Vector: 380 (Data SLB Access) at [c00000000ffbf400] pc: c00000000010a300: mread+0x90/0x190 If we disassemble the PC, we see a load instruction: 0:mon> di c00000000010a300 c00000000010a300 89490000 lbz r10,0(r9) We can also see in exceptions-64s.S that the data_access_slb block doesn't set IDSISR=1, which means it doesn't load DSISR into pt_regs. So the value we're using to determine if the fault is a read/write is some stale value in pt_regs from a previous page fault. Rework the printing logic to separate the SLB fault case out, and only print read/write in the cases where we can determine it. The result looks like eg: 0:mon> d 0x5deadbeef0000000 5deadbeef0000000 [ 721.779525][ C6] BUG: Unable to handle kernel data access at 0x5deadbeef0000000 [ 721.779697][ C6] Faulting instruction address: 0xc00000000014cbe0 cpu 0x6: Vector: 380 (Data SLB Access) at [c00000000ffbf390] 0:mon> d 0 0000000000000000 [ 742.793242][ C6] BUG: Kernel NULL pointer dereference at 0x00000000 [ 742.793316][ C6] Faulting instruction address: 0xc00000000014cbe0 cpu 0x6: Vector: 380 (Data SLB Access) at [c00000000ffbf390]

In the Linux kernel, the following vulnerability has been resolved: ath10k: Fix error handling in ath10k_setup_msa_resources The device_node pointer is returned by of_parse_phandle() with refcount incremented. We should use of_node_put() on it when done. This function only calls of_node_put() in the regular path. And it will cause refcount leak in error path.

In the Linux kernel, the following vulnerability has been resolved: mtd: rawnand: atmel: fix refcount issue in atmel_nand_controller_init The reference counting issue happens in several error handling paths on a refcounted object "nc->dmac". In these paths, the function simply returns the error code, forgetting to balance the reference count of "nc->dmac", increased earlier by dma_request_channel(), which may cause refcount leaks. Fix it by decrementing the refcount of specific object in those error paths.

In the Linux kernel, the following vulnerability has been resolved: mips: cdmm: Fix refcount leak in mips_cdmm_phys_base The of_find_compatible_node() function returns a node pointer with refcount incremented, We should use of_node_put() on it when done Add the missing of_node_put() to release the refcount.

In the Linux kernel, the following vulnerability has been resolved: MIPS: pgalloc: fix memory leak caused by pgd_free() pgd page is freed by generic implementation pgd_free() since commit f9cb654cb550 ("asm-generic: pgalloc: provide generic pgd_free()"), however, there are scenarios that the system uses more than one page as the pgd table, in such cases the generic implementation pgd_free() won't be applicable anymore. For example, when PAGE_SIZE_4KB is enabled and MIPS_VA_BITS_48 is not enabled in a 64bit system, the macro "PGD_ORDER" will be set as "1", which will cause allocating two pages as the pgd table. Well, at the same time, the generic implementation pgd_free() just free one pgd page, which will result in the memory leak. The memory leak can be easily detected by executing shell command: "while true; do ls > /dev/null; grep MemFree /proc/meminfo; done"

In the Linux kernel, the following vulnerability has been resolved: bpf, sockmap: Fix memleak in tcp_bpf_sendmsg while sk msg is full If tcp_bpf_sendmsg() is running while sk msg is full. When sk_msg_alloc() returns -ENOMEM error, tcp_bpf_sendmsg() goes to wait_for_memory. If partial memory has been alloced by sk_msg_alloc(), that is, msg_tx->sg.size is greater than osize after sk_msg_alloc(), memleak occurs. To fix we use sk_msg_trim() to release the allocated memory, then goto wait for memory. Other call paths of sk_msg_alloc() have the similar issue, such as tls_sw_sendmsg(), so handle sk_msg_trim logic inside sk_msg_alloc(), as Cong Wang suggested. This issue can cause the following info: WARNING: CPU: 3 PID: 7950 at net/core/stream.c:208 sk_stream_kill_queues+0xd4/0x1a0 Call Trace: <TASK> inet_csk_destroy_sock+0x55/0x110 __tcp_close+0x279/0x470 tcp_close+0x1f/0x60 inet_release+0x3f/0x80 __sock_release+0x3d/0xb0 sock_close+0x11/0x20 __fput+0x92/0x250 task_work_run+0x6a/0xa0 do_exit+0x33b/0xb60 do_group_exit+0x2f/0xa0 get_signal+0xb6/0x950 arch_do_signal_or_restart+0xac/0x2a0 exit_to_user_mode_prepare+0xa9/0x200 syscall_exit_to_user_mode+0x12/0x30 do_syscall_64+0x46/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae </TASK> WARNING: CPU: 3 PID: 2094 at net/ipv4/af_inet.c:155 inet_sock_destruct+0x13c/0x260 Call Trace: <TASK> __sk_destruct+0x24/0x1f0 sk_psock_destroy+0x19b/0x1c0 process_one_work+0x1b3/0x3c0 kthread+0xe6/0x110 ret_from_fork+0x22/0x30 </TASK>

In the Linux kernel, the following vulnerability has been resolved: RDMA/irdma: Prevent some integer underflows My static checker complains that: drivers/infiniband/hw/irdma/ctrl.c:3605 irdma_sc_ceq_init() warn: can subtract underflow 'info->dev->hmc_fpm_misc.max_ceqs'? It appears that "info->dev->hmc_fpm_misc.max_ceqs" comes from the firmware in irdma_sc_parse_fpm_query_buf() so, yes, there is a chance that it could be zero. Even if we trust the firmware, it's easy enough to change the condition just as a hardenning measure.

In the Linux kernel, the following vulnerability has been resolved: bpf, sockmap: Fix memleak in sk_psock_queue_msg If tcp_bpf_sendmsg is running during a tear down operation we may enqueue data on the ingress msg queue while tear down is trying to free it. sk1 (redirect sk2) sk2 ------------------- --------------- tcp_bpf_sendmsg() tcp_bpf_send_verdict() tcp_bpf_sendmsg_redir() bpf_tcp_ingress() sock_map_close() lock_sock() lock_sock() ... blocking sk_psock_stop sk_psock_clear_state(psock, SK_PSOCK_TX_ENABLED); release_sock(sk); lock_sock() sk_mem_charge() get_page() sk_psock_queue_msg() sk_psock_test_state(psock, SK_PSOCK_TX_ENABLED); drop_sk_msg() release_sock() While drop_sk_msg(), the msg has charged memory form sk by sk_mem_charge and has sg pages need to put. To fix we use sk_msg_free() and then kfee() msg. This issue can cause the following info: WARNING: CPU: 0 PID: 9202 at net/core/stream.c:205 sk_stream_kill_queues+0xc8/0xe0 Call Trace: <IRQ> inet_csk_destroy_sock+0x55/0x110 tcp_rcv_state_process+0xe5f/0xe90 ? sk_filter_trim_cap+0x10d/0x230 ? tcp_v4_do_rcv+0x161/0x250 tcp_v4_do_rcv+0x161/0x250 tcp_v4_rcv+0xc3a/0xce0 ip_protocol_deliver_rcu+0x3d/0x230 ip_local_deliver_finish+0x54/0x60 ip_local_deliver+0xfd/0x110 ? ip_protocol_deliver_rcu+0x230/0x230 ip_rcv+0xd6/0x100 ? ip_local_deliver+0x110/0x110 __netif_receive_skb_one_core+0x85/0xa0 process_backlog+0xa4/0x160 __napi_poll+0x29/0x1b0 net_rx_action+0x287/0x300 __do_softirq+0xff/0x2fc do_softirq+0x79/0x90 </IRQ> WARNING: CPU: 0 PID: 531 at net/ipv4/af_inet.c:154 inet_sock_destruct+0x175/0x1b0 Call Trace: <TASK> __sk_destruct+0x24/0x1f0 sk_psock_destroy+0x19b/0x1c0 process_one_work+0x1b3/0x3c0 ? process_one_work+0x3c0/0x3c0 worker_thread+0x30/0x350 ? process_one_work+0x3c0/0x3c0 kthread+0xe6/0x110 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x22/0x30 </TASK>

In the Linux kernel, the following vulnerability has been resolved: RDMA/mlx5: Fix memory leak in error flow for subscribe event routine In case the second xa_insert() fails, the obj_event is not released. Fix the error unwind flow to free that memory to avoid a memory leak.

In the Linux kernel, the following vulnerability has been resolved: bpf, sockmap: Fix more uncharged while msg has more_data In tcp_bpf_send_verdict(), if msg has more data after tcp_bpf_sendmsg_redir(): tcp_bpf_send_verdict() tosend = msg->sg.size //msg->sg.size = 22220 case __SK_REDIRECT: sk_msg_return() //uncharged msg->sg.size(22220) sk->sk_forward_alloc tcp_bpf_sendmsg_redir() //after tcp_bpf_sendmsg_redir, msg->sg.size=11000 goto more_data; tosend = msg->sg.size //msg->sg.size = 11000 case __SK_REDIRECT: sk_msg_return() //uncharged msg->sg.size(11000) to sk->sk_forward_alloc The msg->sg.size(11000) has been uncharged twice, to fix we can charge the remaining msg->sg.size before goto more data. This issue can cause the following info: WARNING: CPU: 0 PID: 9860 at net/core/stream.c:208 sk_stream_kill_queues+0xd4/0x1a0 Call Trace: <TASK> inet_csk_destroy_sock+0x55/0x110 __tcp_close+0x279/0x470 tcp_close+0x1f/0x60 inet_release+0x3f/0x80 __sock_release+0x3d/0xb0 sock_close+0x11/0x20 __fput+0x92/0x250 task_work_run+0x6a/0xa0 do_exit+0x33b/0xb60 do_group_exit+0x2f/0xa0 get_signal+0xb6/0x950 arch_do_signal_or_restart+0xac/0x2a0 ? vfs_write+0x237/0x290 exit_to_user_mode_prepare+0xa9/0x200 syscall_exit_to_user_mode+0x12/0x30 do_syscall_64+0x46/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae </TASK> WARNING: CPU: 0 PID: 2136 at net/ipv4/af_inet.c:155 inet_sock_destruct+0x13c/0x260 Call Trace: <TASK> __sk_destruct+0x24/0x1f0 sk_psock_destroy+0x19b/0x1c0 process_one_work+0x1b3/0x3c0 worker_thread+0x30/0x350 ? process_one_work+0x3c0/0x3c0 kthread+0xe6/0x110 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x22/0x30 </TASK>

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_uart: add missing NULL check in h5_enqueue Syzbot hit general protection fault in __pm_runtime_resume(). The problem was in missing NULL check. hu->serdev can be NULL and we should not blindly pass &serdev->dev somewhere, since it will cause GPF.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btmtksdio: Fix kernel oops in btmtksdio_interrupt Fix the following kernel oops in btmtksdio_interrrupt [ 14.339134] btmtksdio_interrupt+0x28/0x54 [ 14.339139] process_sdio_pending_irqs+0x68/0x1a0 [ 14.339144] sdio_irq_work+0x40/0x70 [ 14.339154] process_one_work+0x184/0x39c [ 14.339160] worker_thread+0x228/0x3e8 [ 14.339168] kthread+0x148/0x3ac [ 14.339176] ret_from_fork+0x10/0x30 That happened because hdev->power_on is already called before sdio_set_drvdata which btmtksdio_interrupt handler relies on is not properly set up. The details are shown as the below: hci_register_dev would run queue_work(hdev->req_workqueue, &hdev->power_on) as WQ_HIGHPRI workqueue_struct to complete the power-on sequeunce and thus hci_power_on may run before sdio_set_drvdata is done in btmtksdio_probe. The hci_dev_do_open in hci_power_on would initialize the device and enable the interrupt and thus it is possible that btmtksdio_interrupt is being called right before sdio_set_drvdata is filled out. When btmtksdio_interrupt is being called and sdio_set_drvdata is not filled , the kernel oops is going to happen because btmtksdio_interrupt access an uninitialized pointer.

In the Linux kernel, the following vulnerability has been resolved: RDMA/nldev: Prevent underflow in nldev_stat_set_counter_dynamic_doit() This code checks "index" for an upper bound but it does not check for negatives. Change the type to unsigned to prevent underflows.

In the Linux kernel, the following vulnerability has been resolved: mptcp: Fix crash due to tcp_tsorted_anchor was initialized before release skb Got crash when doing pressure test of mptcp: =========================================================================== dst_release: dst:ffffa06ce6e5c058 refcnt:-1 kernel tried to execute NX-protected page - exploit attempt? (uid: 0) BUG: unable to handle kernel paging request at ffffa06ce6e5c058 PGD 190a01067 P4D 190a01067 PUD 43fffb067 PMD 22e403063 PTE 8000000226e5c063 Oops: 0011 [#1] SMP PTI CPU: 7 PID: 7823 Comm: kworker/7:0 Kdump: loaded Tainted: G E Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.2.1 04/01/2014 Call Trace: ? skb_release_head_state+0x68/0x100 ? skb_release_all+0xe/0x30 ? kfree_skb+0x32/0xa0 ? mptcp_sendmsg_frag+0x57e/0x750 ? __mptcp_retrans+0x21b/0x3c0 ? __switch_to_asm+0x35/0x70 ? mptcp_worker+0x25e/0x320 ? process_one_work+0x1a7/0x360 ? worker_thread+0x30/0x390 ? create_worker+0x1a0/0x1a0 ? kthread+0x112/0x130 ? kthread_flush_work_fn+0x10/0x10 ? ret_from_fork+0x35/0x40 =========================================================================== In __mptcp_alloc_tx_skb skb was allocated and skb->tcp_tsorted_anchor will be initialized, in under memory pressure situation sk_wmem_schedule will return false and then kfree_skb. In this case skb->_skb_refdst is not null because_skb_refdst and tcp_tsorted_anchor are stored in the same mem, and kfree_skb will try to release dst and cause crash.

In the Linux kernel, the following vulnerability has been resolved: af_netlink: Fix shift out of bounds in group mask calculation When a netlink message is received, netlink_recvmsg() fills in the address of the sender. One of the fields is the 32-bit bitfield nl_groups, which carries the multicast group on which the message was received. The least significant bit corresponds to group 1, and therefore the highest group that the field can represent is 32. Above that, the UB sanitizer flags the out-of-bounds shift attempts. Which bits end up being set in such case is implementation defined, but it's either going to be a wrong non-zero value, or zero, which is at least not misleading. Make the latter choice deterministic by always setting to 0 for higher-numbered multicast groups. To get information about membership in groups >= 32, userspace is expected to use nl_pktinfo control messages[0], which are enabled by NETLINK_PKTINFO socket option. [0] https://lwn.net/Articles/147608/ The way to trigger this issue is e.g. through monitoring the BRVLAN group: # bridge monitor vlan & # ip link add name br type bridge Which produces the following citation: UBSAN: shift-out-of-bounds in net/netlink/af_netlink.c:162:19 shift exponent 32 is too large for 32-bit type 'int'

In the Linux kernel, the following vulnerability has been resolved: net: dsa: fix panic on shutdown if multi-chip tree failed to probe DSA probing is atypical because a tree of devices must probe all at once, so out of N switches which call dsa_tree_setup_routing_table() during probe, for (N - 1) of them, "complete" will return false and they will exit probing early. The Nth switch will set up the whole tree on their behalf. The implication is that for (N - 1) switches, the driver binds to the device successfully, without doing anything. When the driver is bound, the ->shutdown() method may run. But if the Nth switch has failed to initialize the tree, there is nothing to do for the (N - 1) driver instances, since the slave devices have not been created, etc. Moreover, dsa_switch_shutdown() expects that the calling @ds has been in fact initialized, so it jumps at dereferencing the various data structures, which is incorrect. Avoid the ensuing NULL pointer dereferences by simply checking whether the Nth switch has previously set "ds->setup = true" for the switch which is currently shutting down. The entire setup is serialized under dsa2_mutex which we already hold.

In the Linux kernel, the following vulnerability has been resolved: ice: fix 'scheduling while atomic' on aux critical err interrupt There's a kernel BUG splat on processing aux critical error interrupts in ice_misc_intr(): [ 2100.917085] BUG: scheduling while atomic: swapper/15/0/0x00010000 ... [ 2101.060770] Call Trace: [ 2101.063229] <IRQ> [ 2101.065252] dump_stack+0x41/0x60 [ 2101.068587] __schedule_bug.cold.100+0x4c/0x58 [ 2101.073060] __schedule+0x6a4/0x830 [ 2101.076570] schedule+0x35/0xa0 [ 2101.079727] schedule_preempt_disabled+0xa/0x10 [ 2101.084284] __mutex_lock.isra.7+0x310/0x420 [ 2101.088580] ? ice_misc_intr+0x201/0x2e0 [ice] [ 2101.093078] ice_send_event_to_aux+0x25/0x70 [ice] [ 2101.097921] ice_misc_intr+0x220/0x2e0 [ice] [ 2101.102232] __handle_irq_event_percpu+0x40/0x180 [ 2101.106965] handle_irq_event_percpu+0x30/0x80 [ 2101.111434] handle_irq_event+0x36/0x53 [ 2101.115292] handle_edge_irq+0x82/0x190 [ 2101.119148] handle_irq+0x1c/0x30 [ 2101.122480] do_IRQ+0x49/0xd0 [ 2101.125465] common_interrupt+0xf/0xf [ 2101.129146] </IRQ> ... As Andrew correctly mentioned previously[0], the following call ladder happens: ice_misc_intr() <- hardirq ice_send_event_to_aux() device_lock() mutex_lock() might_sleep() might_resched() <- oops Add a new PF state bit which indicates that an aux critical error occurred and serve it in ice_service_task() in process context. The new ice_pf::oicr_err_reg is read-write in both hardirq and process contexts, but only 3 bits of non-critical data probably aren't worth explicit synchronizing (and they're even in the same byte [31:24]). [0] https://lore.kernel.org/all/YeSRUVmrdmlUXHDn@lunn.ch

In the Linux kernel, the following vulnerability has been resolved: drivers: ethernet: cpsw: fix panic when interrupt coaleceing is set via ethtool cpsw_ethtool_begin directly returns the result of pm_runtime_get_sync when successful. pm_runtime_get_sync returns -error code on failure and 0 on successful resume but also 1 when the device is already active. So the common case for cpsw_ethtool_begin is to return 1. That leads to inconsistent calls to pm_runtime_put in the call-chain so that pm_runtime_put is called one too many times and as result leaving the cpsw dev behind suspended. The suspended cpsw dev leads to an access violation later on by different parts of the cpsw driver. Fix this by calling the return-friendly pm_runtime_resume_and_get function.

In the Linux kernel, the following vulnerability has been resolved: mxser: fix xmit_buf leak in activate when LSR == 0xff When LSR is 0xff in ->activate() (rather unlike), we return an error. Provided ->shutdown() is not called when ->activate() fails, nothing actually frees the buffer in this case. Fix this by properly freeing the buffer in a designated label. We jump there also from the "!info->type" if now too.

In the Linux kernel, the following vulnerability has been resolved: kernel/resource: fix kfree() of bootmem memory again Since commit ebff7d8f270d ("mem hotunplug: fix kfree() of bootmem memory"), we could get a resource allocated during boot via alloc_resource(). And it's required to release the resource using free_resource(). Howerver, many people use kfree directly which will result in kernel BUG. In order to fix this without fixing every call site, just leak a couple of bytes in such corner case.