CVE Database

In the Linux kernel, the following vulnerability has been resolved: powerpc/iommu: Add missing of_node_put in iommu_init_early_dart The device_node pointer is returned by of_find_compatible_node with refcount incremented. We should use of_node_put() to avoid the refcount leak.

In the Linux kernel, the following vulnerability has been resolved: Input: gpio-keys - cancel delayed work only in case of GPIO gpio_keys module can either accept gpios or interrupts. The module initializes delayed work in case of gpios only and is only used if debounce timer is not used, so make sure cancel_delayed_work_sync() is called only when its gpio-backed and debounce_use_hrtimer is false. This fixes the issue seen below when the gpio_keys module is unloaded and an interrupt pin is used instead of GPIO: [ 360.297569] ------------[ cut here ]------------ [ 360.302303] WARNING: CPU: 0 PID: 237 at kernel/workqueue.c:3066 __flush_work+0x414/0x470 [ 360.310531] Modules linked in: gpio_keys(-) [ 360.314797] CPU: 0 PID: 237 Comm: rmmod Not tainted 5.18.0-rc5-arm64-renesas-00116-g73636105874d-dirty #166 [ 360.324662] Hardware name: Renesas SMARC EVK based on r9a07g054l2 (DT) [ 360.331270] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 360.338318] pc : __flush_work+0x414/0x470 [ 360.342385] lr : __cancel_work_timer+0x140/0x1b0 [ 360.347065] sp : ffff80000a7fba00 [ 360.350423] x29: ffff80000a7fba00 x28: ffff000012b9c5c0 x27: 0000000000000000 [ 360.357664] x26: ffff80000a7fbb80 x25: ffff80000954d0a8 x24: 0000000000000001 [ 360.364904] x23: ffff800009757000 x22: 0000000000000000 x21: ffff80000919b000 [ 360.372143] x20: ffff00000f5974e0 x19: ffff00000f5974e0 x18: ffff8000097fcf48 [ 360.379382] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000053f40 [ 360.386622] x14: ffff800009850e88 x13: 0000000000000002 x12: 000000000000a60c [ 360.393861] x11: 000000000000a610 x10: 0000000000000000 x9 : 0000000000000008 [ 360.401100] x8 : 0101010101010101 x7 : 00000000a473c394 x6 : 0080808080808080 [ 360.408339] x5 : 0000000000000001 x4 : 0000000000000000 x3 : ffff80000919b458 [ 360.415578] x2 : ffff8000097577f0 x1 : 0000000000000001 x0 : 0000000000000000 [ 360.422818] Call trace: [ 360.425299] __flush_work+0x414/0x470 [ 360.429012] __cancel_work_timer+0x140/0x1b0 [ 360.433340] cancel_delayed_work_sync+0x10/0x18 [ 360.437931] gpio_keys_quiesce_key+0x28/0x58 [gpio_keys] [ 360.443327] devm_action_release+0x10/0x18 [ 360.447481] release_nodes+0x8c/0x1a0 [ 360.451194] devres_release_all+0x90/0x100 [ 360.455346] device_unbind_cleanup+0x14/0x60 [ 360.459677] device_release_driver_internal+0xe8/0x168 [ 360.464883] driver_detach+0x4c/0x90 [ 360.468509] bus_remove_driver+0x54/0xb0 [ 360.472485] driver_unregister+0x2c/0x58 [ 360.476462] platform_driver_unregister+0x10/0x18 [ 360.481230] gpio_keys_exit+0x14/0x828 [gpio_keys] [ 360.486088] __arm64_sys_delete_module+0x1e0/0x270 [ 360.490945] invoke_syscall+0x40/0xf8 [ 360.494661] el0_svc_common.constprop.3+0xf0/0x110 [ 360.499515] do_el0_svc+0x20/0x78 [ 360.502877] el0_svc+0x48/0xf8 [ 360.505977] el0t_64_sync_handler+0x88/0xb0 [ 360.510216] el0t_64_sync+0x148/0x14c [ 360.513930] irq event stamp: 4306 [ 360.517288] hardirqs last enabled at (4305): [<ffff8000080b0300>] __cancel_work_timer+0x130/0x1b0 [ 360.526359] hardirqs last disabled at (4306): [<ffff800008d194fc>] el1_dbg+0x24/0x88 [ 360.534204] softirqs last enabled at (4278): [<ffff8000080104a0>] _stext+0x4a0/0x5e0 [ 360.542133] softirqs last disabled at (4267): [<ffff8000080932ac>] irq_exit_rcu+0x18c/0x1b0 [ 360.550591] ---[ end trace 0000000000000000 ]---

In the Linux kernel, the following vulnerability has been resolved: RDMA/hfi1: Prevent panic when SDMA is disabled If the hfi1 module is loaded with HFI1_CAP_SDMA off, a call to hfi1_write_iter() will dereference a NULL pointer and panic. A typical stack frame is: sdma_select_user_engine [hfi1] hfi1_user_sdma_process_request [hfi1] hfi1_write_iter [hfi1] do_iter_readv_writev do_iter_write vfs_writev do_writev do_syscall_64 The fix is to test for SDMA in hfi1_write_iter() and fail the I/O with EINVAL.

In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to do sanity check on inline_dots inode As Wenqing reported in bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=215765 It will cause a kernel panic with steps: - mkdir mnt - mount tmp40.img mnt - ls mnt folio_mark_dirty+0x33/0x50 f2fs_add_regular_entry+0x541/0xad0 [f2fs] f2fs_add_dentry+0x6c/0xb0 [f2fs] f2fs_do_add_link+0x182/0x230 [f2fs] __recover_dot_dentries+0x2d6/0x470 [f2fs] f2fs_lookup+0x5af/0x6a0 [f2fs] __lookup_slow+0xac/0x200 lookup_slow+0x45/0x70 walk_component+0x16c/0x250 path_lookupat+0x8b/0x1f0 filename_lookup+0xef/0x250 user_path_at_empty+0x46/0x70 vfs_statx+0x98/0x190 __do_sys_newlstat+0x41/0x90 __x64_sys_newlstat+0x1a/0x30 do_syscall_64+0x37/0xb0 entry_SYSCALL_64_after_hwframe+0x44/0xae The root cause is for special file: e.g. character, block, fifo or socket file, f2fs doesn't assign address space operations pointer array for mapping->a_ops field, so, in a fuzzed image, if inline_dots flag was tagged in special file, during lookup(), when f2fs runs into __recover_dot_dentries(), it will cause NULL pointer access once f2fs_add_regular_entry() calls a_ops->set_dirty_page().

In the Linux kernel, the following vulnerability has been resolved: iommu/mediatek: Remove clk_disable in mtk_iommu_remove After the commit b34ea31fe013 ("iommu/mediatek: Always enable the clk on resume"), the iommu clock is controlled by the runtime callback. thus remove the clk control in the mtk_iommu_remove. Otherwise, it will warning like: echo 14018000.iommu > /sys/bus/platform/drivers/mtk-iommu/unbind [ 51.413044] ------------[ cut here ]------------ [ 51.413648] vpp0_smi_iommu already disabled [ 51.414233] WARNING: CPU: 2 PID: 157 at */v5.15-rc1/kernel/mediatek/ drivers/clk/clk.c:952 clk_core_disable+0xb0/0xb8 [ 51.417174] Hardware name: MT8195V/C(ENG) (DT) [ 51.418635] pc : clk_core_disable+0xb0/0xb8 [ 51.419177] lr : clk_core_disable+0xb0/0xb8 ... [ 51.429375] Call trace: [ 51.429694] clk_core_disable+0xb0/0xb8 [ 51.430193] clk_core_disable_lock+0x24/0x40 [ 51.430745] clk_disable+0x20/0x30 [ 51.431189] mtk_iommu_remove+0x58/0x118 [ 51.431705] platform_remove+0x28/0x60 [ 51.432197] device_release_driver_internal+0x110/0x1f0 [ 51.432873] device_driver_detach+0x18/0x28 [ 51.433418] unbind_store+0xd4/0x108 [ 51.433886] drv_attr_store+0x24/0x38 [ 51.434363] sysfs_kf_write+0x40/0x58 [ 51.434843] kernfs_fop_write_iter+0x164/0x1e0

In the Linux kernel, the following vulnerability has been resolved: iommu/mediatek: Fix NULL pointer dereference when printing dev_name When larbdev is NULL (in the case I hit, the node is incorrectly set iommus = <&iommu NUM>), it will cause device_link_add() fail and kernel crashes when we try to print dev_name(larbdev). Let's fail the probe if a larbdev is NULL to avoid invalid inputs from dts. It should work for normal correct setting and avoid the crash caused by my incorrect setting. Error log: [ 18.189042][ T301] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000050 ... [ 18.344519][ T301] pstate: a0400005 (NzCv daif +PAN -UAO) [ 18.345213][ T301] pc : mtk_iommu_probe_device+0xf8/0x118 [mtk_iommu] [ 18.346050][ T301] lr : mtk_iommu_probe_device+0xd0/0x118 [mtk_iommu] [ 18.346884][ T301] sp : ffffffc00a5635e0 [ 18.347392][ T301] x29: ffffffc00a5635e0 x28: ffffffd44a46c1d8 [ 18.348156][ T301] x27: ffffff80c39a8000 x26: ffffffd44a80cc38 [ 18.348917][ T301] x25: 0000000000000000 x24: ffffffd44a80cc38 [ 18.349677][ T301] x23: ffffffd44e4da4c6 x22: ffffffd44a80cc38 [ 18.350438][ T301] x21: ffffff80cecd1880 x20: 0000000000000000 [ 18.351198][ T301] x19: ffffff80c439f010 x18: ffffffc00a50d0c0 [ 18.351959][ T301] x17: ffffffffffffffff x16: 0000000000000004 [ 18.352719][ T301] x15: 0000000000000004 x14: ffffffd44eb5d420 [ 18.353480][ T301] x13: 0000000000000ad2 x12: 0000000000000003 [ 18.354241][ T301] x11: 00000000fffffad2 x10: c0000000fffffad2 [ 18.355003][ T301] x9 : a0d288d8d7142d00 x8 : a0d288d8d7142d00 [ 18.355763][ T301] x7 : ffffffd44c2bc640 x6 : 0000000000000000 [ 18.356524][ T301] x5 : 0000000000000080 x4 : 0000000000000001 [ 18.357284][ T301] x3 : 0000000000000000 x2 : 0000000000000005 [ 18.358045][ T301] x1 : 0000000000000000 x0 : 0000000000000000 [ 18.360208][ T301] Hardware name: MT6873 (DT) [ 18.360771][ T301] Call trace: [ 18.361168][ T301] dump_backtrace+0xf8/0x1f0 [ 18.361737][ T301] dump_stack_lvl+0xa8/0x11c [ 18.362305][ T301] dump_stack+0x1c/0x2c [ 18.362816][ T301] mrdump_common_die+0x184/0x40c [mrdump] [ 18.363575][ T301] ipanic_die+0x24/0x38 [mrdump] [ 18.364230][ T301] atomic_notifier_call_chain+0x128/0x2b8 [ 18.364937][ T301] die+0x16c/0x568 [ 18.365394][ T301] __do_kernel_fault+0x1e8/0x214 [ 18.365402][ T301] do_page_fault+0xb8/0x678 [ 18.366934][ T301] do_translation_fault+0x48/0x64 [ 18.368645][ T301] do_mem_abort+0x68/0x148 [ 18.368652][ T301] el1_abort+0x40/0x64 [ 18.368660][ T301] el1h_64_sync_handler+0x54/0x88 [ 18.368668][ T301] el1h_64_sync+0x68/0x6c [ 18.368673][ T301] mtk_iommu_probe_device+0xf8/0x118 [mtk_iommu] ...

In the Linux kernel, the following vulnerability has been resolved: rtla: Avoid record NULL pointer dereference Fix the following null/deref_null.cocci errors: ./tools/tracing/rtla/src/osnoise_hist.c:870:31-36: ERROR: record is NULL but dereferenced. ./tools/tracing/rtla/src/osnoise_top.c:650:31-36: ERROR: record is NULL but dereferenced. ./tools/tracing/rtla/src/timerlat_hist.c:905:31-36: ERROR: record is NULL but dereferenced. ./tools/tracing/rtla/src/timerlat_top.c:700:31-36: ERROR: record is NULL but dereferenced. "record" is NULL before calling osnoise_init_trace_tool. Add a tag "out_free" to avoid dereferring a NULL pointer.

In the Linux kernel, the following vulnerability has been resolved: dmaengine: idxd: Fix the error handling path in idxd_cdev_register() If a call to alloc_chrdev_region() fails, the already allocated resources are leaking. Add the needed error handling path to fix the leak.

In the Linux kernel, the following vulnerability has been resolved: video: fbdev: clcdfb: Fix refcount leak in clcdfb_of_vram_setup of_parse_phandle() returns a node pointer with refcount incremented, we should use of_node_put() on it when not need anymore. Add missing of_node_put() to avoid refcount leak.

In the Linux kernel, the following vulnerability has been resolved: net: annotate races around sk->sk_bound_dev_if UDP sendmsg() is lockless, and reads sk->sk_bound_dev_if while this field can be changed by another thread. Adds minimal annotations to avoid KCSAN splats for UDP. Following patches will add more annotations to potential lockless readers. BUG: KCSAN: data-race in __ip6_datagram_connect / udpv6_sendmsg write to 0xffff888136d47a94 of 4 bytes by task 7681 on cpu 0: __ip6_datagram_connect+0x6e2/0x930 net/ipv6/datagram.c:221 ip6_datagram_connect+0x2a/0x40 net/ipv6/datagram.c:272 inet_dgram_connect+0x107/0x190 net/ipv4/af_inet.c:576 __sys_connect_file net/socket.c:1900 [inline] __sys_connect+0x197/0x1b0 net/socket.c:1917 __do_sys_connect net/socket.c:1927 [inline] __se_sys_connect net/socket.c:1924 [inline] __x64_sys_connect+0x3d/0x50 net/socket.c:1924 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x2b/0x50 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae read to 0xffff888136d47a94 of 4 bytes by task 7670 on cpu 1: udpv6_sendmsg+0xc60/0x16e0 net/ipv6/udp.c:1436 inet6_sendmsg+0x5f/0x80 net/ipv6/af_inet6.c:652 sock_sendmsg_nosec net/socket.c:705 [inline] sock_sendmsg net/socket.c:725 [inline] ____sys_sendmsg+0x39a/0x510 net/socket.c:2413 ___sys_sendmsg net/socket.c:2467 [inline] __sys_sendmmsg+0x267/0x4c0 net/socket.c:2553 __do_sys_sendmmsg net/socket.c:2582 [inline] __se_sys_sendmmsg net/socket.c:2579 [inline] __x64_sys_sendmmsg+0x53/0x60 net/socket.c:2579 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x2b/0x50 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae value changed: 0x00000000 -> 0xffffff9b Reported by Kernel Concurrency Sanitizer on: CPU: 1 PID: 7670 Comm: syz-executor.3 Tainted: G W 5.18.0-rc1-syzkaller-dirty #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 I chose to not add Fixes: tag because race has minor consequences and stable teams busy enough.

In the Linux kernel, the following vulnerability has been resolved: iwlwifi: mei: fix potential NULL-ptr deref If SKB allocation fails, continue rather than using the NULL pointer. Coverity CID: 1497650

In the Linux kernel, the following vulnerability has been resolved: ipmi:ipmb: Fix refcount leak in ipmi_ipmb_probe of_parse_phandle() returns a node pointer with refcount incremented, we should use of_node_put() on it when done. Add missing of_node_put() to avoid refcount leak.

In the Linux kernel, the following vulnerability has been resolved: ext4: fix race condition between ext4_write and ext4_convert_inline_data Hulk Robot reported a BUG_ON: ================================================================== EXT4-fs error (device loop3): ext4_mb_generate_buddy:805: group 0, block bitmap and bg descriptor inconsistent: 25 vs 31513 free clusters kernel BUG at fs/ext4/ext4_jbd2.c:53! invalid opcode: 0000 [#1] SMP KASAN PTI CPU: 0 PID: 25371 Comm: syz-executor.3 Not tainted 5.10.0+ #1 RIP: 0010:ext4_put_nojournal fs/ext4/ext4_jbd2.c:53 [inline] RIP: 0010:__ext4_journal_stop+0x10e/0x110 fs/ext4/ext4_jbd2.c:116 [...] Call Trace: ext4_write_inline_data_end+0x59a/0x730 fs/ext4/inline.c:795 generic_perform_write+0x279/0x3c0 mm/filemap.c:3344 ext4_buffered_write_iter+0x2e3/0x3d0 fs/ext4/file.c:270 ext4_file_write_iter+0x30a/0x11c0 fs/ext4/file.c:520 do_iter_readv_writev+0x339/0x3c0 fs/read_write.c:732 do_iter_write+0x107/0x430 fs/read_write.c:861 vfs_writev fs/read_write.c:934 [inline] do_pwritev+0x1e5/0x380 fs/read_write.c:1031 [...] ================================================================== Above issue may happen as follows: cpu1 cpu2 __________________________|__________________________ do_pwritev vfs_writev do_iter_write ext4_file_write_iter ext4_buffered_write_iter generic_perform_write ext4_da_write_begin vfs_fallocate ext4_fallocate ext4_convert_inline_data ext4_convert_inline_data_nolock ext4_destroy_inline_data_nolock clear EXT4_STATE_MAY_INLINE_DATA ext4_map_blocks ext4_ext_map_blocks ext4_mb_new_blocks ext4_mb_regular_allocator ext4_mb_good_group_nolock ext4_mb_init_group ext4_mb_init_cache ext4_mb_generate_buddy --> error ext4_test_inode_state(inode, EXT4_STATE_MAY_INLINE_DATA) ext4_restore_inline_data set EXT4_STATE_MAY_INLINE_DATA ext4_block_write_begin ext4_da_write_end ext4_test_inode_state(inode, EXT4_STATE_MAY_INLINE_DATA) ext4_write_inline_data_end handle=NULL ext4_journal_stop(handle) __ext4_journal_stop ext4_put_nojournal(handle) ref_cnt = (unsigned long)handle BUG_ON(ref_cnt == 0) ---> BUG_ON The lock held by ext4_convert_inline_data is xattr_sem, but the lock held by generic_perform_write is i_rwsem. Therefore, the two locks can be concurrent. To solve above issue, we add inode_lock() for ext4_convert_inline_data(). At the same time, move ext4_convert_inline_data() in front of ext4_punch_hole(), remove similar handling from ext4_punch_hole().

In the Linux kernel, the following vulnerability has been resolved: ext4: fix bug_on in __es_tree_search Hulk Robot reported a BUG_ON: ================================================================== kernel BUG at fs/ext4/extents_status.c:199! [...] RIP: 0010:ext4_es_end fs/ext4/extents_status.c:199 [inline] RIP: 0010:__es_tree_search+0x1e0/0x260 fs/ext4/extents_status.c:217 [...] Call Trace: ext4_es_cache_extent+0x109/0x340 fs/ext4/extents_status.c:766 ext4_cache_extents+0x239/0x2e0 fs/ext4/extents.c:561 ext4_find_extent+0x6b7/0xa20 fs/ext4/extents.c:964 ext4_ext_map_blocks+0x16b/0x4b70 fs/ext4/extents.c:4384 ext4_map_blocks+0xe26/0x19f0 fs/ext4/inode.c:567 ext4_getblk+0x320/0x4c0 fs/ext4/inode.c:980 ext4_bread+0x2d/0x170 fs/ext4/inode.c:1031 ext4_quota_read+0x248/0x320 fs/ext4/super.c:6257 v2_read_header+0x78/0x110 fs/quota/quota_v2.c:63 v2_check_quota_file+0x76/0x230 fs/quota/quota_v2.c:82 vfs_load_quota_inode+0x5d1/0x1530 fs/quota/dquot.c:2368 dquot_enable+0x28a/0x330 fs/quota/dquot.c:2490 ext4_quota_enable fs/ext4/super.c:6137 [inline] ext4_enable_quotas+0x5d7/0x960 fs/ext4/super.c:6163 ext4_fill_super+0xa7c9/0xdc00 fs/ext4/super.c:4754 mount_bdev+0x2e9/0x3b0 fs/super.c:1158 mount_fs+0x4b/0x1e4 fs/super.c:1261 [...] ================================================================== Above issue may happen as follows: ------------------------------------- ext4_fill_super ext4_enable_quotas ext4_quota_enable ext4_iget __ext4_iget ext4_ext_check_inode ext4_ext_check __ext4_ext_check ext4_valid_extent_entries Check for overlapping extents does't take effect dquot_enable vfs_load_quota_inode v2_check_quota_file v2_read_header ext4_quota_read ext4_bread ext4_getblk ext4_map_blocks ext4_ext_map_blocks ext4_find_extent ext4_cache_extents ext4_es_cache_extent ext4_es_cache_extent __es_tree_search ext4_es_end BUG_ON(es->es_lblk + es->es_len < es->es_lblk) The error ext4 extents is as follows: 0af3 0300 0400 0000 00000000 extent_header 00000000 0100 0000 12000000 extent1 00000000 0100 0000 18000000 extent2 02000000 0400 0000 14000000 extent3 In the ext4_valid_extent_entries function, if prev is 0, no error is returned even if lblock<=prev. This was intended to skip the check on the first extent, but in the error image above, prev=0+1-1=0 when checking the second extent, so even though lblock<=prev, the function does not return an error. As a result, bug_ON occurs in __es_tree_search and the system panics. To solve this problem, we only need to check that: 1. The lblock of the first extent is not less than 0. 2. The lblock of the next extent is not less than the next block of the previous extent. The same applies to extent_idx.

In the Linux kernel, the following vulnerability has been resolved: ext4: fix memory leak in parse_apply_sb_mount_options() If processing the on-disk mount options fails after any memory was allocated in the ext4_fs_context, e.g. s_qf_names, then this memory is leaked. Fix this by calling ext4_fc_free() instead of kfree() directly. Reproducer: mkfs.ext4 -F /dev/vdc tune2fs /dev/vdc -E mount_opts=usrjquota=file echo clear > /sys/kernel/debug/kmemleak mount /dev/vdc /vdc echo scan > /sys/kernel/debug/kmemleak sleep 5 echo scan > /sys/kernel/debug/kmemleak cat /sys/kernel/debug/kmemleak

In the Linux kernel, the following vulnerability has been resolved: block: Fix potential deadlock in blk_ia_range_sysfs_show() When being read, a sysfs attribute is already protected against removal with the kobject node active reference counter. As a result, in blk_ia_range_sysfs_show(), there is no need to take the queue sysfs lock when reading the value of a range attribute. Using the queue sysfs lock in this function creates a potential deadlock situation with the disk removal, something that a lockdep signals with a splat when the device is removed: [ 760.703551] Possible unsafe locking scenario: [ 760.703551] [ 760.703554] CPU0 CPU1 [ 760.703556] ---- ---- [ 760.703558] lock(&q->sysfs_lock); [ 760.703565] lock(kn->active#385); [ 760.703573] lock(&q->sysfs_lock); [ 760.703579] lock(kn->active#385); [ 760.703587] [ 760.703587] *** DEADLOCK *** Solve this by removing the mutex_lock()/mutex_unlock() calls from blk_ia_range_sysfs_show().

In the Linux kernel, the following vulnerability has been resolved: RDMA/hfi1: Fix potential integer multiplication overflow errors When multiplying of different types, an overflow is possible even when storing the result in a larger type. This is because the conversion is done after the multiplication. So arithmetic overflow and thus in incorrect value is possible. Correct an instance of this in the inter packet delay calculation. Fix by ensuring one of the operands is u64 which will promote the other to u64 as well ensuring no overflow.

In the Linux kernel, the following vulnerability has been resolved: lib/string_helpers: fix not adding strarray to device's resource list Add allocated strarray to device's resource list. This is a must to automatically release strarray when the device disappears. Without this fix we have a memory leak in the few drivers which use devm_kasprintf_strarray().

In the Linux kernel, the following vulnerability has been resolved: ftrace: Clean up hash direct_functions on register failures We see the following GPF when register_ftrace_direct fails: [ ] general protection fault, probably for non-canonical address \ 0x200000000000010: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC PTI [...] [ ] RIP: 0010:ftrace_find_rec_direct+0x53/0x70 [ ] Code: 48 c1 e0 03 48 03 42 08 48 8b 10 31 c0 48 85 d2 74 [...] [ ] RSP: 0018:ffffc9000138bc10 EFLAGS: 00010206 [ ] RAX: 0000000000000000 RBX: ffffffff813e0df0 RCX: 000000000000003b [ ] RDX: 0200000000000000 RSI: 000000000000000c RDI: ffffffff813e0df0 [ ] RBP: ffffffffa00a3000 R08: ffffffff81180ce0 R09: 0000000000000001 [ ] R10: ffffc9000138bc18 R11: 0000000000000001 R12: ffffffff813e0df0 [ ] R13: ffffffff813e0df0 R14: ffff888171b56400 R15: 0000000000000000 [ ] FS: 00007fa9420c7780(0000) GS:ffff888ff6a00000(0000) knlGS:000000000 [ ] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ ] CR2: 000000000770d000 CR3: 0000000107d50003 CR4: 0000000000370ee0 [ ] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ ] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ ] Call Trace: [ ] <TASK> [ ] register_ftrace_direct+0x54/0x290 [ ] ? render_sigset_t+0xa0/0xa0 [ ] bpf_trampoline_update+0x3f5/0x4a0 [ ] ? 0xffffffffa00a3000 [ ] bpf_trampoline_link_prog+0xa9/0x140 [ ] bpf_tracing_prog_attach+0x1dc/0x450 [ ] bpf_raw_tracepoint_open+0x9a/0x1e0 [ ] ? find_held_lock+0x2d/0x90 [ ] ? lock_release+0x150/0x430 [ ] __sys_bpf+0xbd6/0x2700 [ ] ? lock_is_held_type+0xd8/0x130 [ ] __x64_sys_bpf+0x1c/0x20 [ ] do_syscall_64+0x3a/0x80 [ ] entry_SYSCALL_64_after_hwframe+0x44/0xae [ ] RIP: 0033:0x7fa9421defa9 [ ] Code: 00 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 9 f8 [...] [ ] RSP: 002b:00007ffed743bd78 EFLAGS: 00000246 ORIG_RAX: 0000000000000141 [ ] RAX: ffffffffffffffda RBX: 00000000069d2480 RCX: 00007fa9421defa9 [ ] RDX: 0000000000000078 RSI: 00007ffed743bd80 RDI: 0000000000000011 [ ] RBP: 00007ffed743be00 R08: 0000000000bb7270 R09: 0000000000000000 [ ] R10: 00000000069da210 R11: 0000000000000246 R12: 0000000000000001 [ ] R13: 00007ffed743c4b0 R14: 00000000069d2480 R15: 0000000000000001 [ ] </TASK> [ ] Modules linked in: klp_vm(OK) [ ] ---[ end trace 0000000000000000 ]--- One way to trigger this is: 1. load a livepatch that patches kernel function xxx; 2. run bpftrace -e 'kfunc:xxx {}', this will fail (expected for now); 3. repeat #2 => gpf. This is because the entry is added to direct_functions, but not removed. Fix this by remove the entry from direct_functions when register_ftrace_direct fails. Also remove the last trailing space from ftrace.c, so we don't have to worry about it anymore.

In the Linux kernel, the following vulnerability has been resolved: md: Don't set mddev private to NULL in raid0 pers->free In normal stop process, it does like this: do_md_stop | __md_stop (pers->free(); mddev->private=NULL) | md_free (free mddev) __md_stop sets mddev->private to NULL after pers->free. The raid device will be stopped and mddev memory is free. But in reshape, it doesn't free the mddev and mddev will still be used in new raid. In reshape, it first sets mddev->private to new_pers and then runs old_pers->free(). Now raid0 sets mddev->private to NULL in raid0_free. The new raid can't work anymore. It will panic when dereference mddev->private because of NULL pointer dereference. It can panic like this: [63010.814972] kernel BUG at drivers/md/raid10.c:928! [63010.819778] invalid opcode: 0000 [#1] PREEMPT SMP NOPTI [63010.825011] CPU: 3 PID: 44437 Comm: md0_resync Kdump: loaded Not tainted 5.14.0-86.el9.x86_64 #1 [63010.833789] Hardware name: Dell Inc. PowerEdge R6415/07YXFK, BIOS 1.15.0 09/11/2020 [63010.841440] RIP: 0010:raise_barrier+0x161/0x170 [raid10] [63010.865508] RSP: 0018:ffffc312408bbc10 EFLAGS: 00010246 [63010.870734] RAX: 0000000000000000 RBX: ffffa00bf7d39800 RCX: 0000000000000000 [63010.877866] RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffffa00bf7d39800 [63010.884999] RBP: 0000000000000000 R08: fffffa4945e74400 R09: 0000000000000000 [63010.892132] R10: ffffa00eed02f798 R11: 0000000000000000 R12: ffffa00bbc435200 [63010.899266] R13: ffffa00bf7d39800 R14: 0000000000000400 R15: 0000000000000003 [63010.906399] FS: 0000000000000000(0000) GS:ffffa00eed000000(0000) knlGS:0000000000000000 [63010.914485] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [63010.920229] CR2: 00007f5cfbe99828 CR3: 0000000105efe000 CR4: 00000000003506e0 [63010.927363] Call Trace: [63010.929822] ? bio_reset+0xe/0x40 [63010.933144] ? raid10_alloc_init_r10buf+0x60/0xa0 [raid10] [63010.938629] raid10_sync_request+0x756/0x1610 [raid10] [63010.943770] md_do_sync.cold+0x3e4/0x94c [63010.947698] md_thread+0xab/0x160 [63010.951024] ? md_write_inc+0x50/0x50 [63010.954688] kthread+0x149/0x170 [63010.957923] ? set_kthread_struct+0x40/0x40 [63010.962107] ret_from_fork+0x22/0x30 Removing the code that sets mddev->private to NULL in raid0 can fix problem.

In the Linux kernel, the following vulnerability has been resolved: tty: goldfish: Use tty_port_destroy() to destroy port In goldfish_tty_probe(), the port initialized through tty_port_init() should be destroyed in error paths.In goldfish_tty_remove(), qtty->port also should be destroyed or else might leak resources. Fix the above by calling tty_port_destroy().

In the Linux kernel, the following vulnerability has been resolved: usb: dwc3: gadget: Replace list_for_each_entry_safe() if using giveback The list_for_each_entry_safe() macro saves the current item (n) and the item after (n+1), so that n can be safely removed without corrupting the list. However, when traversing the list and removing items using gadget giveback, the DWC3 lock is briefly released, allowing other routines to execute. There is a situation where, while items are being removed from the cancelled_list using dwc3_gadget_ep_cleanup_cancelled_requests(), the pullup disable routine is running in parallel (due to UDC unbind). As the cleanup routine removes n, and the pullup disable removes n+1, once the cleanup retakes the DWC3 lock, it references a request who was already removed/handled. With list debug enabled, this leads to a panic. Ensure all instances of the macro are replaced where gadget giveback is used. Example call stack: Thread#1: __dwc3_gadget_ep_set_halt() - CLEAR HALT -> dwc3_gadget_ep_cleanup_cancelled_requests() ->list_for_each_entry_safe() ->dwc3_gadget_giveback(n) ->dwc3_gadget_del_and_unmap_request()- n deleted[cancelled_list] ->spin_unlock ->Thread#2 executes ... ->dwc3_gadget_giveback(n+1) ->Already removed! Thread#2: dwc3_gadget_pullup() ->waiting for dwc3 spin_lock ... ->Thread#1 released lock ->dwc3_stop_active_transfers() ->dwc3_remove_requests() ->fetches n+1 item from cancelled_list (n removed by Thread#1) ->dwc3_gadget_giveback() ->dwc3_gadget_del_and_unmap_request()- n+1 deleted[cancelled_list] ->spin_unlock

In the Linux kernel, the following vulnerability has been resolved: phy: qcom-qmp: fix struct clk leak on probe errors Make sure to release the pipe clock reference in case of a late probe error (e.g. probe deferral).

In the Linux kernel, the following vulnerability has been resolved: phy: qcom-qmp: fix reset-controller leak on probe errors Make sure to release the lane reset controller in case of a late probe error (e.g. probe deferral). Note that due to the reset controller being defined in devicetree in "lane" child nodes, devm_reset_control_get_exclusive() cannot be used directly.

In the Linux kernel, the following vulnerability has been resolved: blk-iolatency: Fix inflight count imbalances and IO hangs on offline iolatency needs to track the number of inflight IOs per cgroup. As this tracking can be expensive, it is disabled when no cgroup has iolatency configured for the device. To ensure that the inflight counters stay balanced, iolatency_set_limit() freezes the request_queue while manipulating the enabled counter, which ensures that no IO is in flight and thus all counters are zero. Unfortunately, iolatency_set_limit() isn't the only place where the enabled counter is manipulated. iolatency_pd_offline() can also dec the counter and trigger disabling. As this disabling happens without freezing the q, this can easily happen while some IOs are in flight and thus leak the counts. This can be easily demonstrated by turning on iolatency on an one empty cgroup while IOs are in flight in other cgroups and then removing the cgroup. Note that iolatency shouldn't have been enabled elsewhere in the system to ensure that removing the cgroup disables iolatency for the whole device. The following keeps flipping on and off iolatency on sda: echo +io > /sys/fs/cgroup/cgroup.subtree_control while true; do mkdir -p /sys/fs/cgroup/test echo '8:0 target=100000' > /sys/fs/cgroup/test/io.latency sleep 1 rmdir /sys/fs/cgroup/test sleep 1 done and there's concurrent fio generating direct rand reads: fio --name test --filename=/dev/sda --direct=1 --rw=randread \ --runtime=600 --time_based --iodepth=256 --numjobs=4 --bs=4k while monitoring with the following drgn script: while True: for css in css_for_each_descendant_pre(prog['blkcg_root'].css.address_of_()): for pos in hlist_for_each(container_of(css, 'struct blkcg', 'css').blkg_list): blkg = container_of(pos, 'struct blkcg_gq', 'blkcg_node') pd = blkg.pd[prog['blkcg_policy_iolatency'].plid] if pd.value_() == 0: continue iolat = container_of(pd, 'struct iolatency_grp', 'pd') inflight = iolat.rq_wait.inflight.counter.value_() if inflight: print(f'inflight={inflight} {disk_name(blkg.q.disk).decode("utf-8")} ' f'{cgroup_path(css.cgroup).decode("utf-8")}') time.sleep(1) The monitoring output looks like the following: inflight=1 sda /user.slice inflight=1 sda /user.slice ... inflight=14 sda /user.slice inflight=13 sda /user.slice inflight=17 sda /user.slice inflight=15 sda /user.slice inflight=18 sda /user.slice inflight=17 sda /user.slice inflight=20 sda /user.slice inflight=19 sda /user.slice <- fio stopped, inflight stuck at 19 inflight=19 sda /user.slice inflight=19 sda /user.slice If a cgroup with stuck inflight ends up getting throttled, the throttled IOs will never get issued as there's no completion event to wake it up leading to an indefinite hang. This patch fixes the bug by unifying enable handling into a work item which is automatically kicked off from iolatency_set_min_lat_nsec() which is called from both iolatency_set_limit() and iolatency_pd_offline() paths. Punting to a work item is necessary as iolatency_pd_offline() is called under spinlocks while freezing a request_queue requires a sleepable context. This also simplifies the code reducing LOC sans the comments and avoids the unnecessary freezes which were happening whenever a cgroup's latency target is newly set or cleared.

In the Linux kernel, the following vulnerability has been resolved: serial: 8250_aspeed_vuart: Fix potential NULL dereference in aspeed_vuart_probe platform_get_resource() may fail and return NULL, so we should better check it's return value to avoid a NULL pointer dereference.

In the Linux kernel, the following vulnerability has been resolved: usb: usbip: fix a refcount leak in stub_probe() usb_get_dev() is called in stub_device_alloc(). When stub_probe() fails after that, usb_put_dev() needs to be called to release the reference. Fix this by moving usb_put_dev() to sdev_free error path handling. Find this by code review.

In the Linux kernel, the following vulnerability has been resolved: watchdog: rzg2l_wdt: Fix 32bit overflow issue The value of timer_cycle_us can be 0 due to 32bit overflow. For eg:- If we assign the counter value "0xfff" for computing maxval. This patch fixes this issue by appending ULL to 1024, so that it is promoted to 64bit. This patch also fixes the warning message, 'watchdog: Invalid min and max timeout values, resetting to 0!'.

In the Linux kernel, the following vulnerability has been resolved: net: ethernet: ti: am65-cpsw-nuss: Fix some refcount leaks of_get_child_by_name() returns a node pointer with refcount incremented, we should use of_node_put() on it when not need anymore. am65_cpsw_init_cpts() and am65_cpsw_nuss_probe() don't release the refcount in error case. Add missing of_node_put() to avoid refcount leak.

In the Linux kernel, the following vulnerability has been resolved: watchdog: rzg2l_wdt: Fix 'BUG: Invalid wait context' This patch fixes the issue 'BUG: Invalid wait context' during restart() callback by using clk_prepare_enable() instead of pm_runtime_get_sync() for turning on the clocks during restart. This issue is noticed when testing with renesas_defconfig. [ 42.213802] reboot: Restarting system [ 42.217860] [ 42.219364] ============================= [ 42.223368] [ BUG: Invalid wait context ] [ 42.227372] 5.17.0-rc5-arm64-renesas-00002-g10393723e35e #522 Not tainted [ 42.234153] ----------------------------- [ 42.238155] systemd-shutdow/1 is trying to lock: [ 42.242766] ffff00000a650828 (&genpd->mlock){+.+.}-{3:3}, at: genpd_lock_mtx+0x14/0x20 [ 42.250709] other info that might help us debug this: [ 42.255753] context-{4:4} [ 42.258368] 2 locks held by systemd-shutdow/1: [ 42.262806] #0: ffff80000944e1c8 (system_transition_mutex#2){+.+.}-{3:3}, at: __do_sys_reboot+0xd0/0x250 [ 42.272388] #1: ffff8000094c4e40 (rcu_read_lock){....}-{1:2}, at: atomic_notifier_call_chain+0x0/0x150 [ 42.281795] stack backtrace: [ 42.284672] CPU: 0 PID: 1 Comm: systemd-shutdow Not tainted 5.17.0-rc5-arm64-renesas-00002-g10393723e35e #522 [ 42.294577] Hardware name: Renesas SMARC EVK based on r9a07g044c2 (DT) [ 42.301096] Call trace: [ 42.303538] dump_backtrace+0xcc/0xd8 [ 42.307203] show_stack+0x14/0x30 [ 42.310517] dump_stack_lvl+0x88/0xb0 [ 42.314180] dump_stack+0x14/0x2c [ 42.317492] __lock_acquire+0x1b24/0x1b50 [ 42.321502] lock_acquire+0x120/0x3a8 [ 42.325162] __mutex_lock+0x84/0x8f8 [ 42.328737] mutex_lock_nested+0x30/0x58 [ 42.332658] genpd_lock_mtx+0x14/0x20 [ 42.336319] genpd_runtime_resume+0xc4/0x228 [ 42.340587] __rpm_callback+0x44/0x170 [ 42.344337] rpm_callback+0x64/0x70 [ 42.347824] rpm_resume+0x4e0/0x6b8 [ 42.351310] __pm_runtime_resume+0x50/0x78 [ 42.355404] rzg2l_wdt_restart+0x28/0x68 [ 42.359329] watchdog_restart_notifier+0x1c/0x30 [ 42.363943] atomic_notifier_call_chain+0x94/0x150 [ 42.368732] do_kernel_restart+0x24/0x30 [ 42.372652] machine_restart+0x44/0x70 [ 42.376399] kernel_restart+0x3c/0x60 [ 42.380058] __do_sys_reboot+0x228/0x250 [ 42.383977] __arm64_sys_reboot+0x20/0x28 [ 42.387983] invoke_syscall+0x40/0xf8