CVE Database

In the Linux kernel, the following vulnerability has been resolved: ipv6: Fix signed integer overflow in l2tp_ip6_sendmsg When len >= INT_MAX - transhdrlen, ulen = len + transhdrlen will be overflow. To fix, we can follow what udpv6 does and subtract the transhdrlen from the max.

In the Linux kernel, the following vulnerability has been resolved: clocksource: hyper-v: unexport __init-annotated hv_init_clocksource() EXPORT_SYMBOL and __init is a bad combination because the .init.text section is freed up after the initialization. Hence, modules cannot use symbols annotated __init. The access to a freed symbol may end up with kernel panic. modpost used to detect it, but it has been broken for a decade. Recently, I fixed modpost so it started to warn it again, then this showed up in linux-next builds. There are two ways to fix it: - Remove __init - Remove EXPORT_SYMBOL I chose the latter for this case because the only in-tree call-site, arch/x86/kernel/cpu/mshyperv.c is never compiled as modular. (CONFIG_HYPERVISOR_GUEST is boolean)

In the Linux kernel, the following vulnerability has been resolved: drm/i915/reset: Fix error_state_read ptr + offset use Fix our pointer offset usage in error_state_read when there is no i915_gpu_coredump but buf offset is non-zero. This fixes a kernel page fault can happen when multiple tests are running concurrently in a loop and one is producing engine resets and consuming the i915 error_state dump while the other is forcing full GT resets. (takes a while to trigger). The dmesg call trace: [ 5590.803000] BUG: unable to handle page fault for address: ffffffffa0b0e000 [ 5590.803009] #PF: supervisor read access in kernel mode [ 5590.803013] #PF: error_code(0x0000) - not-present page [ 5590.803016] PGD 5814067 P4D 5814067 PUD 5815063 PMD 109de4067 PTE 0 [ 5590.803022] Oops: 0000 [#1] PREEMPT SMP NOPTI [ 5590.803026] CPU: 5 PID: 13656 Comm: i915_hangman Tainted: G U 5.17.0-rc5-ups69-guc-err-capt-rev6+ #136 [ 5590.803033] Hardware name: Intel Corporation Alder Lake Client Platform/AlderLake-M LP4x RVP, BIOS ADLPFWI1.R00. 3031.A02.2201171222 01/17/2022 [ 5590.803039] RIP: 0010:memcpy_erms+0x6/0x10 [ 5590.803045] Code: fe ff ff cc eb 1e 0f 1f 00 48 89 f8 48 89 d1 48 c1 e9 03 83 e2 07 f3 48 a5 89 d1 f3 a4 c3 66 0f 1f 44 00 00 48 89 f8 48 89 d1 <f3> a4 c3 0f 1f 80 00 00 00 00 48 89 f8 48 83 fa 20 72 7e 40 38 fe [ 5590.803054] RSP: 0018:ffffc90003a8fdf0 EFLAGS: 00010282 [ 5590.803057] RAX: ffff888107ee9000 RBX: ffff888108cb1a00 RCX: 0000000000000f8f [ 5590.803061] RDX: 0000000000001000 RSI: ffffffffa0b0e000 RDI: ffff888107ee9071 [ 5590.803065] RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000001 [ 5590.803069] R10: 0000000000000001 R11: 0000000000000002 R12: 0000000000000019 [ 5590.803073] R13: 0000000000174fff R14: 0000000000001000 R15: ffff888107ee9000 [ 5590.803077] FS: 00007f62a99bee80(0000) GS:ffff88849f880000(0000) knlGS:0000000000000000 [ 5590.803082] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 5590.803085] CR2: ffffffffa0b0e000 CR3: 000000010a1a8004 CR4: 0000000000770ee0 [ 5590.803089] PKRU: 55555554 [ 5590.803091] Call Trace: [ 5590.803093] <TASK> [ 5590.803096] error_state_read+0xa1/0xd0 [i915] [ 5590.803175] kernfs_fop_read_iter+0xb2/0x1b0 [ 5590.803180] new_sync_read+0x116/0x1a0 [ 5590.803185] vfs_read+0x114/0x1b0 [ 5590.803189] ksys_read+0x63/0xe0 [ 5590.803193] do_syscall_64+0x38/0xc0 [ 5590.803197] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 5590.803201] RIP: 0033:0x7f62aaea5912 [ 5590.803204] Code: c0 e9 b2 fe ff ff 50 48 8d 3d 5a b9 0c 00 e8 05 19 02 00 0f 1f 44 00 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 0f 05 <48> 3d 00 f0 ff ff 77 56 c3 0f 1f 44 00 00 48 83 ec 28 48 89 54 24 [ 5590.803213] RSP: 002b:00007fff5b659ae8 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 [ 5590.803218] RAX: ffffffffffffffda RBX: 0000000000100000 RCX: 00007f62aaea5912 [ 5590.803221] RDX: 000000000008b000 RSI: 00007f62a8c4000f RDI: 0000000000000006 [ 5590.803225] RBP: 00007f62a8bcb00f R08: 0000000000200010 R09: 0000000000101000 [ 5590.803229] R10: 0000000000000001 R11: 0000000000000246 R12: 0000000000000006 [ 5590.803233] R13: 0000000000075000 R14: 00007f62a8acb010 R15: 0000000000200000 [ 5590.803238] </TASK> [ 5590.803240] Modules linked in: i915 ttm drm_buddy drm_dp_helper drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops prime_numbers nfnetlink br_netfilter overlay mei_pxp mei_hdcp x86_pkg_temp_thermal coretemp kvm_intel snd_hda_codec_hdmi snd_hda_intel ---truncated---

In the Linux kernel, the following vulnerability has been resolved: arm64: ftrace: consistently handle PLTs. Sometimes it is necessary to use a PLT entry to call an ftrace trampoline. This is handled by ftrace_make_call() and ftrace_make_nop(), with each having *almost* identical logic, but this is not handled by ftrace_modify_call() since its introduction in commit: 3b23e4991fb66f6d ("arm64: implement ftrace with regs") Due to this, if we ever were to call ftrace_modify_call() for a callsite which requires a PLT entry for a trampoline, then either: a) If the old addr requires a trampoline, ftrace_modify_call() will use an out-of-range address to generate the 'old' branch instruction. This will result in warnings from aarch64_insn_gen_branch_imm() and ftrace_modify_code(), and no instructions will be modified. As ftrace_modify_call() will return an error, this will result in subsequent internal ftrace errors. b) If the old addr does not require a trampoline, but the new addr does, ftrace_modify_call() will use an out-of-range address to generate the 'new' branch instruction. This will result in warnings from aarch64_insn_gen_branch_imm(), and ftrace_modify_code() will replace the 'old' branch with a BRK. This will result in a kernel panic when this BRK is later executed. Practically speaking, case (a) is vastly more likely than case (b), and typically this will result in internal ftrace errors that don't necessarily affect the rest of the system. This can be demonstrated with an out-of-tree test module which triggers ftrace_modify_call(), e.g. | # insmod test_ftrace.ko | test_ftrace: Function test_function raw=0xffffb3749399201c, callsite=0xffffb37493992024 | branch_imm_common: offset out of range | branch_imm_common: offset out of range | ------------[ ftrace bug ]------------ | ftrace failed to modify | [<ffffb37493992024>] test_function+0x8/0x38 [test_ftrace] | actual: 1d:00:00:94 | Updating ftrace call site to call a different ftrace function | ftrace record flags: e0000002 | (2) R | expected tramp: ffffb374ae42ed54 | ------------[ cut here ]------------ | WARNING: CPU: 0 PID: 165 at kernel/trace/ftrace.c:2085 ftrace_bug+0x280/0x2b0 | Modules linked in: test_ftrace(+) | CPU: 0 PID: 165 Comm: insmod Not tainted 5.19.0-rc2-00002-g4d9ead8b45ce #13 | Hardware name: linux,dummy-virt (DT) | pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) | pc : ftrace_bug+0x280/0x2b0 | lr : ftrace_bug+0x280/0x2b0 | sp : ffff80000839ba00 | x29: ffff80000839ba00 x28: 0000000000000000 x27: ffff80000839bcf0 | x26: ffffb37493994180 x25: ffffb374b0991c28 x24: ffffb374b0d70000 | x23: 00000000ffffffea x22: ffffb374afcc33b0 x21: ffffb374b08f9cc8 | x20: ffff572b8462c000 x19: ffffb374b08f9000 x18: ffffffffffffffff | x17: 6c6c6163202c6331 x16: ffffb374ae5ad110 x15: ffffb374b0d51ee4 | x14: 0000000000000000 x13: 3435646532346561 x12: 3437336266666666 | x11: 203a706d61727420 x10: 6465746365707865 x9 : ffffb374ae5149e8 | x8 : 336266666666203a x7 : 706d617274206465 x6 : 00000000fffff167 | x5 : ffff572bffbc4a08 x4 : 00000000fffff167 x3 : 0000000000000000 | x2 : 0000000000000000 x1 : ffff572b84461e00 x0 : 0000000000000022 | Call trace: | ftrace_bug+0x280/0x2b0 | ftrace_replace_code+0x98/0xa0 | ftrace_modify_all_code+0xe0/0x144 | arch_ftrace_update_code+0x14/0x20 | ftrace_startup+0xf8/0x1b0 | register_ftrace_function+0x38/0x90 | test_ftrace_init+0xd0/0x1000 [test_ftrace] | do_one_initcall+0x50/0x2b0 | do_init_module+0x50/0x1f0 | load_module+0x17c8/0x1d64 | __do_sys_finit_module+0xa8/0x100 | __arm64_sys_finit_module+0x2c/0x3c | invoke_syscall+0x50/0x120 | el0_svc_common.constprop.0+0xdc/0x100 | do_el0_svc+0x3c/0xd0 | el0_svc+0x34/0xb0 | el0t_64_sync_handler+0xbc/0x140 | el0t_64_sync+0x18c/0x190 | ---[ end trace 0000000000000000 ]--- We can solve this by consistently determining whether to use a PLT entry for an address. Note that since (the earlier) commit: f1a54ae9 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: irqchip/gic/realview: Fix refcount leak in realview_gic_of_init of_find_matching_node_and_match() returns a node pointer with refcount incremented, we should use of_node_put() on it when not need anymore. Add missing of_node_put() to avoid refcount leak.

In the Linux kernel, the following vulnerability has been resolved: irqchip/apple-aic: Fix refcount leak in aic_of_ic_init of_get_child_by_name() returns a node pointer with refcount incremented, we should use of_node_put() on it when not need anymore. Add missing of_node_put() to avoid refcount leak.

In the Linux kernel, the following vulnerability has been resolved: irqchip/apple-aic: Fix refcount leak in build_fiq_affinity of_find_node_by_phandle() returns a node pointer with refcount incremented, we should use of_node_put() on it when not need anymore. Add missing of_node_put() to avoid refcount leak.

In the Linux kernel, the following vulnerability has been resolved: irqchip/gic-v3: Fix error handling in gic_populate_ppi_partitions of_get_child_by_name() returns a node pointer with refcount incremented, we should use of_node_put() on it when not need anymore. When kcalloc fails, it missing of_node_put() and results in refcount leak. Fix this by goto out_put_node label.

In the Linux kernel, the following vulnerability has been resolved: irqchip/gic-v3: Fix refcount leak in gic_populate_ppi_partitions of_find_node_by_phandle() returns a node pointer with refcount incremented, we should use of_node_put() on it when not need anymore. Add missing of_node_put() to avoid refcount leak.

In the Linux kernel, the following vulnerability has been resolved: irqchip/realtek-rtl: Fix refcount leak in map_interrupts of_find_node_by_phandle() returns a node pointer with refcount incremented, we should use of_node_put() on it when not need anymore. This function doesn't call of_node_put() in error path. Call of_node_put() directly after of_property_read_u32() to cover both normal path and error path.

In the Linux kernel, the following vulnerability has been resolved: usb: dwc2: Fix memory leak in dwc2_hcd_init usb_create_hcd will alloc memory for hcd, and we should call usb_put_hcd to free it when platform_get_resource() fails to prevent memory leak. goto error2 label instead error1 to fix this.

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: lpc32xx_udc: Fix refcount leak in lpc32xx_udc_probe of_parse_phandle() returns a node pointer with refcount incremented, we should use of_node_put() on it when not need anymore. Add missing of_node_put() to avoid refcount leak. of_node_put() will check NULL pointer.

In the Linux kernel, the following vulnerability has been resolved: dm mirror log: round up region bitmap size to BITS_PER_LONG The code in dm-log rounds up bitset_size to 32 bits. It then uses find_next_zero_bit_le on the allocated region. find_next_zero_bit_le accesses the bitmap using unsigned long pointers. So, on 64-bit architectures, it may access 4 bytes beyond the allocated size. Fix this bug by rounding up bitset_size to BITS_PER_LONG. This bug was found by running the lvm2 testsuite with kasan.

In the Linux kernel, the following vulnerability has been resolved: cfi: Fix __cfi_slowpath_diag RCU usage with cpuidle RCU_NONIDLE usage during __cfi_slowpath_diag can result in an invalid RCU state in the cpuidle code path: WARNING: CPU: 1 PID: 0 at kernel/rcu/tree.c:613 rcu_eqs_enter+0xe4/0x138 ... Call trace: rcu_eqs_enter+0xe4/0x138 rcu_idle_enter+0xa8/0x100 cpuidle_enter_state+0x154/0x3a8 cpuidle_enter+0x3c/0x58 do_idle.llvm.6590768638138871020+0x1f4/0x2ec cpu_startup_entry+0x28/0x2c secondary_start_kernel+0x1b8/0x220 __secondary_switched+0x94/0x98 Instead, call rcu_irq_enter/exit to wake up RCU only when needed and disable interrupts for the entire CFI shadow/module check when we do.

In the Linux kernel, the following vulnerability has been resolved: ext4: fix bug_on ext4_mb_use_inode_pa Hulk Robot reported a BUG_ON: ================================================================== kernel BUG at fs/ext4/mballoc.c:3211! [...] RIP: 0010:ext4_mb_mark_diskspace_used.cold+0x85/0x136f [...] Call Trace: ext4_mb_new_blocks+0x9df/0x5d30 ext4_ext_map_blocks+0x1803/0x4d80 ext4_map_blocks+0x3a4/0x1a10 ext4_writepages+0x126d/0x2c30 do_writepages+0x7f/0x1b0 __filemap_fdatawrite_range+0x285/0x3b0 file_write_and_wait_range+0xb1/0x140 ext4_sync_file+0x1aa/0xca0 vfs_fsync_range+0xfb/0x260 do_fsync+0x48/0xa0 [...] ================================================================== Above issue may happen as follows: ------------------------------------- do_fsync vfs_fsync_range ext4_sync_file file_write_and_wait_range __filemap_fdatawrite_range do_writepages ext4_writepages mpage_map_and_submit_extent mpage_map_one_extent ext4_map_blocks ext4_mb_new_blocks ext4_mb_normalize_request >>> start + size <= ac->ac_o_ex.fe_logical ext4_mb_regular_allocator ext4_mb_simple_scan_group ext4_mb_use_best_found ext4_mb_new_preallocation ext4_mb_new_inode_pa ext4_mb_use_inode_pa >>> set ac->ac_b_ex.fe_len <= 0 ext4_mb_mark_diskspace_used >>> BUG_ON(ac->ac_b_ex.fe_len <= 0); we can easily reproduce this problem with the following commands: `fallocate -l100M disk` `mkfs.ext4 -b 1024 -g 256 disk` `mount disk /mnt` `fsstress -d /mnt -l 0 -n 1000 -p 1` The size must be smaller than or equal to EXT4_BLOCKS_PER_GROUP. Therefore, "start + size <= ac->ac_o_ex.fe_logical" may occur when the size is truncated. So start should be the start position of the group where ac_o_ex.fe_logical is located after alignment. In addition, when the value of fe_logical or EXT4_BLOCKS_PER_GROUP is very large, the value calculated by start_off is more accurate.

In the Linux kernel, the following vulnerability has been resolved: ext4: add reserved GDT blocks check We capture a NULL pointer issue when resizing a corrupt ext4 image which is freshly clear resize_inode feature (not run e2fsck). It could be simply reproduced by following steps. The problem is because of the resize_inode feature was cleared, and it will convert the filesystem to meta_bg mode in ext4_resize_fs(), but the es->s_reserved_gdt_blocks was not reduced to zero, so could we mistakenly call reserve_backup_gdb() and passing an uninitialized resize_inode to it when adding new group descriptors. mkfs.ext4 /dev/sda 3G tune2fs -O ^resize_inode /dev/sda #forget to run requested e2fsck mount /dev/sda /mnt resize2fs /dev/sda 8G ======== BUG: kernel NULL pointer dereference, address: 0000000000000028 CPU: 19 PID: 3243 Comm: resize2fs Not tainted 5.18.0-rc7-00001-gfde086c5ebfd #748 ... RIP: 0010:ext4_flex_group_add+0xe08/0x2570 ... Call Trace: <TASK> ext4_resize_fs+0xbec/0x1660 __ext4_ioctl+0x1749/0x24e0 ext4_ioctl+0x12/0x20 __x64_sys_ioctl+0xa6/0x110 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f2dd739617b ======== The fix is simple, add a check in ext4_resize_begin() to make sure that the es->s_reserved_gdt_blocks is zero when the resize_inode feature is disabled.

In the Linux kernel, the following vulnerability has been resolved: 9p: fix fid refcount leak in v9fs_vfs_atomic_open_dotl We need to release directory fid if we fail halfway through open This fixes fid leaking with xfstests generic 531

In the Linux kernel, the following vulnerability has been resolved: 9p: fix fid refcount leak in v9fs_vfs_get_link we check for protocol version later than required, after a fid has been obtained. Just move the version check earlier.

In the Linux kernel, the following vulnerability has been resolved: scsi: ibmvfc: Store vhost pointer during subcrq allocation Currently the back pointer from a queue to the vhost adapter isn't set until after subcrq interrupt registration. The value is available when a queue is first allocated and can/should be also set for primary and async queues as well as subcrqs. This fixes a crash observed during kexec/kdump on Power 9 with legacy XICS interrupt controller where a pending subcrq interrupt from the previous kernel can be replayed immediately upon IRQ registration resulting in dereference of a garbage backpointer in ibmvfc_interrupt_scsi(). Kernel attempted to read user page (58) - exploit attempt? (uid: 0) BUG: Kernel NULL pointer dereference on read at 0x00000058 Faulting instruction address: 0xc008000003216a08 Oops: Kernel access of bad area, sig: 11 [#1] ... NIP [c008000003216a08] ibmvfc_interrupt_scsi+0x40/0xb0 [ibmvfc] LR [c0000000082079e8] __handle_irq_event_percpu+0x98/0x270 Call Trace: [c000000047fa3d80] [c0000000123e6180] 0xc0000000123e6180 (unreliable) [c000000047fa3df0] [c0000000082079e8] __handle_irq_event_percpu+0x98/0x270 [c000000047fa3ea0] [c000000008207d18] handle_irq_event+0x98/0x188 [c000000047fa3ef0] [c00000000820f564] handle_fasteoi_irq+0xc4/0x310 [c000000047fa3f40] [c000000008205c60] generic_handle_irq+0x50/0x80 [c000000047fa3f60] [c000000008015c40] __do_irq+0x70/0x1a0 [c000000047fa3f90] [c000000008016d7c] __do_IRQ+0x9c/0x130 [c000000014622f60] [0000000020000000] 0x20000000 [c000000014622ff0] [c000000008016e50] do_IRQ+0x40/0xa0 [c000000014623020] [c000000008017044] replay_soft_interrupts+0x194/0x2f0 [c000000014623210] [c0000000080172a8] arch_local_irq_restore+0x108/0x170 [c000000014623240] [c000000008eb1008] _raw_spin_unlock_irqrestore+0x58/0xb0 [c000000014623270] [c00000000820b12c] __setup_irq+0x49c/0x9f0 [c000000014623310] [c00000000820b7c0] request_threaded_irq+0x140/0x230 [c000000014623380] [c008000003212a50] ibmvfc_register_scsi_channel+0x1e8/0x2f0 [ibmvfc] [c000000014623450] [c008000003213d1c] ibmvfc_init_sub_crqs+0xc4/0x1f0 [ibmvfc] [c0000000146234d0] [c0080000032145a8] ibmvfc_reset_crq+0x150/0x210 [ibmvfc] [c000000014623550] [c0080000032147c8] ibmvfc_init_crq+0x160/0x280 [ibmvfc] [c0000000146235f0] [c00800000321a9cc] ibmvfc_probe+0x2a4/0x530 [ibmvfc]

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix hang during unmount when block group reclaim task is running When we start an unmount, at close_ctree(), if we have the reclaim task running and in the middle of a data block group relocation, we can trigger a deadlock when stopping an async reclaim task, producing a trace like the following: [629724.498185] task:kworker/u16:7 state:D stack: 0 pid:681170 ppid: 2 flags:0x00004000 [629724.499760] Workqueue: events_unbound btrfs_async_reclaim_metadata_space [btrfs] [629724.501267] Call Trace: [629724.501759] <TASK> [629724.502174] __schedule+0x3cb/0xed0 [629724.502842] schedule+0x4e/0xb0 [629724.503447] btrfs_wait_on_delayed_iputs+0x7c/0xc0 [btrfs] [629724.504534] ? prepare_to_wait_exclusive+0xc0/0xc0 [629724.505442] flush_space+0x423/0x630 [btrfs] [629724.506296] ? rcu_read_unlock_trace_special+0x20/0x50 [629724.507259] ? lock_release+0x220/0x4a0 [629724.507932] ? btrfs_get_alloc_profile+0xb3/0x290 [btrfs] [629724.508940] ? do_raw_spin_unlock+0x4b/0xa0 [629724.509688] btrfs_async_reclaim_metadata_space+0x139/0x320 [btrfs] [629724.510922] process_one_work+0x252/0x5a0 [629724.511694] ? process_one_work+0x5a0/0x5a0 [629724.512508] worker_thread+0x52/0x3b0 [629724.513220] ? process_one_work+0x5a0/0x5a0 [629724.514021] kthread+0xf2/0x120 [629724.514627] ? kthread_complete_and_exit+0x20/0x20 [629724.515526] ret_from_fork+0x22/0x30 [629724.516236] </TASK> [629724.516694] task:umount state:D stack: 0 pid:719055 ppid:695412 flags:0x00004000 [629724.518269] Call Trace: [629724.518746] <TASK> [629724.519160] __schedule+0x3cb/0xed0 [629724.519835] schedule+0x4e/0xb0 [629724.520467] schedule_timeout+0xed/0x130 [629724.521221] ? lock_release+0x220/0x4a0 [629724.521946] ? lock_acquired+0x19c/0x420 [629724.522662] ? trace_hardirqs_on+0x1b/0xe0 [629724.523411] __wait_for_common+0xaf/0x1f0 [629724.524189] ? usleep_range_state+0xb0/0xb0 [629724.524997] __flush_work+0x26d/0x530 [629724.525698] ? flush_workqueue_prep_pwqs+0x140/0x140 [629724.526580] ? lock_acquire+0x1a0/0x310 [629724.527324] __cancel_work_timer+0x137/0x1c0 [629724.528190] close_ctree+0xfd/0x531 [btrfs] [629724.529000] ? evict_inodes+0x166/0x1c0 [629724.529510] generic_shutdown_super+0x74/0x120 [629724.530103] kill_anon_super+0x14/0x30 [629724.530611] btrfs_kill_super+0x12/0x20 [btrfs] [629724.531246] deactivate_locked_super+0x31/0xa0 [629724.531817] cleanup_mnt+0x147/0x1c0 [629724.532319] task_work_run+0x5c/0xa0 [629724.532984] exit_to_user_mode_prepare+0x1a6/0x1b0 [629724.533598] syscall_exit_to_user_mode+0x16/0x40 [629724.534200] do_syscall_64+0x48/0x90 [629724.534667] entry_SYSCALL_64_after_hwframe+0x44/0xae [629724.535318] RIP: 0033:0x7fa2b90437a7 [629724.535804] RSP: 002b:00007ffe0b7e4458 EFLAGS: 00000246 ORIG_RAX: 00000000000000a6 [629724.536912] RAX: 0000000000000000 RBX: 00007fa2b9182264 RCX: 00007fa2b90437a7 [629724.538156] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000555d6cf20dd0 [629724.539053] RBP: 0000555d6cf20ba0 R08: 0000000000000000 R09: 00007ffe0b7e3200 [629724.539956] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 [629724.540883] R13: 0000555d6cf20dd0 R14: 0000555d6cf20cb0 R15: 0000000000000000 [629724.541796] </TASK> This happens because: 1) Before entering close_ctree() we have the async block group reclaim task running and relocating a data block group; 2) There's an async metadata (or data) space reclaim task running; 3) We enter close_ctree() and park the cleaner kthread; 4) The async space reclaim task is at flush_space() and runs all the existing delayed iputs; 5) Before the async space reclaim task calls btrfs_wait_on_delayed_iputs(), the block group reclaim task which is doing the data block group relocation, creates a delayed iput at replace_file_extents() (called when COWing leaves that have file extent items pointing to relocated data exten ---truncated---

In the Linux kernel, the following vulnerability has been resolved: filemap: Handle sibling entries in filemap_get_read_batch() If a read races with an invalidation followed by another read, it is possible for a folio to be replaced with a higher-order folio. If that happens, we'll see a sibling entry for the new folio in the next iteration of the loop. This manifests as a NULL pointer dereference while holding the RCU read lock. Handle this by simply returning. The next call will find the new folio and handle it correctly. The other ways of handling this rare race are more complex and it's just not worth it.

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix request_sock leak in sk lookup helpers A customer reported a request_socket leak in a Calico cloud environment. We found that a BPF program was doing a socket lookup with takes a refcnt on the socket and that it was finding the request_socket but returning the parent LISTEN socket via sk_to_full_sk() without decrementing the child request socket 1st, resulting in request_sock slab object leak. This patch retains the existing behaviour of returning full socks to the caller but it also decrements the child request_socket if one is present before doing so to prevent the leak. Thanks to Curtis Taylor for all the help in diagnosing and testing this. And thanks to Antoine Tenart for the reproducer and patch input. v2 of this patch contains, refactor as per Daniel Borkmann's suggestions to validate RCU flags on the listen socket so that it balances with bpf_sk_release() and update comments as per Martin KaFai Lau's suggestion. One small change to Daniels suggestion, put "sk = sk2" under "if (sk2 != sk)" to avoid an extra instruction.

In the Linux kernel, the following vulnerability has been resolved: drm/msm/mdp4: Fix refcount leak in mdp4_modeset_init_intf of_graph_get_remote_node() returns remote device node pointer with refcount incremented, we should use of_node_put() on it when not need anymore. Add missing of_node_put() to avoid refcount leak. Patchwork: https://patchwork.freedesktop.org/patch/488473/

In the Linux kernel, the following vulnerability has been resolved: net: phy: at803x: fix NULL pointer dereference on AR9331 PHY Latest kernel will explode on the PHY interrupt config, since it depends now on allocated priv. So, run probe to allocate priv to fix it. ar9331_switch ethernet.1:10 lan0 (uninitialized): PHY [!ahb!ethernet@1a000000!mdio!switch@10:00] driver [Qualcomm Atheros AR9331 built-in PHY] (irq=13) CPU 0 Unable to handle kernel paging request at virtual address 0000000a, epc == 8050e8a8, ra == 80504b34 ... Call Trace: [<8050e8a8>] at803x_config_intr+0x5c/0xd0 [<80504b34>] phy_request_interrupt+0xa8/0xd0 [<8050289c>] phylink_bringup_phy+0x2d8/0x3ac [<80502b68>] phylink_fwnode_phy_connect+0x118/0x130 [<8074d8ec>] dsa_slave_create+0x270/0x420 [<80743b04>] dsa_port_setup+0x12c/0x148 [<8074580c>] dsa_register_switch+0xaf0/0xcc0 [<80511344>] ar9331_sw_probe+0x370/0x388 [<8050cb78>] mdio_probe+0x44/0x70 [<804df300>] really_probe+0x200/0x424 [<804df7b4>] __driver_probe_device+0x290/0x298 [<804df810>] driver_probe_device+0x54/0xe4 [<804dfd50>] __device_attach_driver+0xe4/0x130 [<804dcb00>] bus_for_each_drv+0xb4/0xd8 [<804dfac4>] __device_attach+0x104/0x1a4 [<804ddd24>] bus_probe_device+0x48/0xc4 [<804deb44>] deferred_probe_work_func+0xf0/0x10c [<800a0ffc>] process_one_work+0x314/0x4d4 [<800a17fc>] worker_thread+0x2a4/0x354 [<800a9a54>] kthread+0x134/0x13c [<8006306c>] ret_from_kernel_thread+0x14/0x1c Same Issue would affect some other PHYs (QCA8081, QCA9561), so fix it too.

In the Linux kernel, the following vulnerability has been resolved: erspan: do not assume transport header is always set Rewrite tests in ip6erspan_tunnel_xmit() and erspan_fb_xmit() to not assume transport header is set. syzbot reported: WARNING: CPU: 0 PID: 1350 at include/linux/skbuff.h:2911 skb_transport_header include/linux/skbuff.h:2911 [inline] WARNING: CPU: 0 PID: 1350 at include/linux/skbuff.h:2911 ip6erspan_tunnel_xmit+0x15af/0x2eb0 net/ipv6/ip6_gre.c:963 Modules linked in: CPU: 0 PID: 1350 Comm: aoe_tx0 Not tainted 5.19.0-rc2-syzkaller-00160-g274295c6e53f #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-2 04/01/2014 RIP: 0010:skb_transport_header include/linux/skbuff.h:2911 [inline] RIP: 0010:ip6erspan_tunnel_xmit+0x15af/0x2eb0 net/ipv6/ip6_gre.c:963 Code: 0f 47 f0 40 88 b5 7f fe ff ff e8 8c 16 4b f9 89 de bf ff ff ff ff e8 a0 12 4b f9 66 83 fb ff 0f 85 1d f1 ff ff e8 71 16 4b f9 <0f> 0b e9 43 f0 ff ff e8 65 16 4b f9 48 8d 85 30 ff ff ff ba 60 00 RSP: 0018:ffffc90005daf910 EFLAGS: 00010293 RAX: 0000000000000000 RBX: 000000000000ffff RCX: 0000000000000000 RDX: ffff88801f032100 RSI: ffffffff882e8d3f RDI: 0000000000000003 RBP: ffffc90005dafab8 R08: 0000000000000003 R09: 000000000000ffff R10: 000000000000ffff R11: 0000000000000000 R12: ffff888024f21d40 R13: 000000000000a288 R14: 00000000000000b0 R15: ffff888025a2e000 FS: 0000000000000000(0000) GS:ffff88802c800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000001b2e425000 CR3: 000000006d099000 CR4: 0000000000152ef0 Call Trace: <TASK> __netdev_start_xmit include/linux/netdevice.h:4805 [inline] netdev_start_xmit include/linux/netdevice.h:4819 [inline] xmit_one net/core/dev.c:3588 [inline] dev_hard_start_xmit+0x188/0x880 net/core/dev.c:3604 sch_direct_xmit+0x19f/0xbe0 net/sched/sch_generic.c:342 __dev_xmit_skb net/core/dev.c:3815 [inline] __dev_queue_xmit+0x14a1/0x3900 net/core/dev.c:4219 dev_queue_xmit include/linux/netdevice.h:2994 [inline] tx+0x6a/0xc0 drivers/block/aoe/aoenet.c:63 kthread+0x1e7/0x3b0 drivers/block/aoe/aoecmd.c:1229 kthread+0x2e9/0x3a0 kernel/kthread.c:376 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:302 </TASK>

In the Linux kernel, the following vulnerability has been resolved: afs: Fix dynamic root getattr The recent patch to make afs_getattr consult the server didn't account for the pseudo-inodes employed by the dynamic root-type afs superblock not having a volume or a server to access, and thus an oops occurs if such a directory is stat'd. Fix this by checking to see if the vnode->volume pointer actually points anywhere before following it in afs_getattr(). This can be tested by stat'ing a directory in /afs. It may be sufficient just to do "ls /afs" and the oops looks something like: BUG: kernel NULL pointer dereference, address: 0000000000000020 ... RIP: 0010:afs_getattr+0x8b/0x14b ... Call Trace: <TASK> vfs_statx+0x79/0xf5 vfs_fstatat+0x49/0x62

In the Linux kernel, the following vulnerability has been resolved: iio: adc: aspeed: Fix refcount leak in aspeed_adc_set_trim_data of_find_node_by_name() returns a node pointer with refcount incremented, we should use of_node_put() on it when done. Add missing of_node_put() to avoid refcount leak.

In the Linux kernel, the following vulnerability has been resolved: iio: adc: adi-axi-adc: Fix refcount leak in adi_axi_adc_attach_client of_parse_phandle() returns a node pointer with refcount incremented, we should use of_node_put() on it when not need anymore. Add missing of_node_put() to avoid refcount leak.

In the Linux kernel, the following vulnerability has been resolved: xtensa: Fix refcount leak bug in time.c In calibrate_ccount(), of_find_compatible_node() will return a node pointer with refcount incremented. We should use of_node_put() when it is not used anymore.

In the Linux kernel, the following vulnerability has been resolved: xtensa: xtfpga: Fix refcount leak bug in setup In machine_setup(), of_find_compatible_node() will return a node pointer with refcount incremented. We should use of_node_put() when it is not used anymore.