CVE Database

In the Linux kernel, the following vulnerability has been resolved: gpio: aggregator: protect driver attr handlers against module unload Both new_device_store and delete_device_store touch module global resources (e.g. gpio_aggregator_lock). To prevent race conditions with module unload, a reference needs to be held. Add try_module_get() in these handlers. For new_device_store, this eliminates what appears to be the most dangerous scenario: if an id is allocated from gpio_aggregator_idr but platform_device_register has not yet been called or completed, a concurrent module unload could fail to unregister/delete the device, leaving behind a dangling platform device/GPIO forwarder. This can result in various issues. The following simple reproducer demonstrates these problems: #!/bin/bash while :; do # note: whether 'gpiochip0 0' exists or not does not matter. echo 'gpiochip0 0' > /sys/bus/platform/drivers/gpio-aggregator/new_device done & while :; do modprobe gpio-aggregator modprobe -r gpio-aggregator done & wait Starting with the following warning, several kinds of warnings will appear and the system may become unstable: ------------[ cut here ]------------ list_del corruption, ffff888103e2e980->next is LIST_POISON1 (dead000000000100) WARNING: CPU: 1 PID: 1327 at lib/list_debug.c:56 __list_del_entry_valid_or_report+0xa3/0x120 [...] RIP: 0010:__list_del_entry_valid_or_report+0xa3/0x120 [...] Call Trace: <TASK> ? __list_del_entry_valid_or_report+0xa3/0x120 ? __warn.cold+0x93/0xf2 ? __list_del_entry_valid_or_report+0xa3/0x120 ? report_bug+0xe6/0x170 ? __irq_work_queue_local+0x39/0xe0 ? handle_bug+0x58/0x90 ? exc_invalid_op+0x13/0x60 ? asm_exc_invalid_op+0x16/0x20 ? __list_del_entry_valid_or_report+0xa3/0x120 gpiod_remove_lookup_table+0x22/0x60 new_device_store+0x315/0x350 [gpio_aggregator] kernfs_fop_write_iter+0x137/0x1f0 vfs_write+0x262/0x430 ksys_write+0x60/0xd0 do_syscall_64+0x6c/0x180 entry_SYSCALL_64_after_hwframe+0x76/0x7e [...] </TASK> ---[ end trace 0000000000000000 ]---

In the Linux kernel, the following vulnerability has been resolved: btrfs: zoned: fix extent range end unlock in cow_file_range() Running generic/751 on the for-next branch often results in a hang like below. They are both stack by locking an extent. This suggests someone forget to unlock an extent. INFO: task kworker/u128:1:12 blocked for more than 323 seconds. Not tainted 6.13.0-BTRFS-ZNS+ #503 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:kworker/u128:1 state:D stack:0 pid:12 tgid:12 ppid:2 flags:0x00004000 Workqueue: btrfs-fixup btrfs_work_helper [btrfs] Call Trace: <TASK> __schedule+0x534/0xdd0 schedule+0x39/0x140 __lock_extent+0x31b/0x380 [btrfs] ? __pfx_autoremove_wake_function+0x10/0x10 btrfs_writepage_fixup_worker+0xf1/0x3a0 [btrfs] btrfs_work_helper+0xff/0x480 [btrfs] ? lock_release+0x178/0x2c0 process_one_work+0x1ee/0x570 ? srso_return_thunk+0x5/0x5f worker_thread+0x1d1/0x3b0 ? __pfx_worker_thread+0x10/0x10 kthread+0x10b/0x230 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x30/0x50 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> INFO: task kworker/u134:0:184 blocked for more than 323 seconds. Not tainted 6.13.0-BTRFS-ZNS+ #503 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:kworker/u134:0 state:D stack:0 pid:184 tgid:184 ppid:2 flags:0x00004000 Workqueue: writeback wb_workfn (flush-btrfs-4) Call Trace: <TASK> __schedule+0x534/0xdd0 schedule+0x39/0x140 __lock_extent+0x31b/0x380 [btrfs] ? __pfx_autoremove_wake_function+0x10/0x10 find_lock_delalloc_range+0xdb/0x260 [btrfs] writepage_delalloc+0x12f/0x500 [btrfs] ? srso_return_thunk+0x5/0x5f extent_write_cache_pages+0x232/0x840 [btrfs] btrfs_writepages+0x72/0x130 [btrfs] do_writepages+0xe7/0x260 ? srso_return_thunk+0x5/0x5f ? lock_acquire+0xd2/0x300 ? srso_return_thunk+0x5/0x5f ? find_held_lock+0x2b/0x80 ? wbc_attach_and_unlock_inode.part.0+0x102/0x250 ? wbc_attach_and_unlock_inode.part.0+0x102/0x250 __writeback_single_inode+0x5c/0x4b0 writeback_sb_inodes+0x22d/0x550 __writeback_inodes_wb+0x4c/0xe0 wb_writeback+0x2f6/0x3f0 wb_workfn+0x32a/0x510 process_one_work+0x1ee/0x570 ? srso_return_thunk+0x5/0x5f worker_thread+0x1d1/0x3b0 ? __pfx_worker_thread+0x10/0x10 kthread+0x10b/0x230 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x30/0x50 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> This happens because we have another success path for the zoned mode. When there is no active zone available, btrfs_reserve_extent() returns -EAGAIN. In this case, we have two reactions. (1) If the given range is never allocated, we can only wait for someone to finish a zone, so wait on BTRFS_FS_NEED_ZONE_FINISH bit and retry afterward. (2) Or, if some allocations are already done, we must bail out and let the caller to send IOs for the allocation. This is because these IOs may be necessary to finish a zone. The commit 06f364284794 ("btrfs: do proper folio cleanup when cow_file_range() failed") moved the unlock code from the inside of the loop to the outside. So, previously, the allocated extents are unlocked just after the allocation and so before returning from the function. However, they are no longer unlocked on the case (2) above. That caused the hang issue. Fix the issue by modifying the 'end' to the end of the allocated range. Then, we can exit the loop and the same unlock code can properly handle the case.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix null check for pipe_ctx->plane_state in resource_build_scaling_params Null pointer dereference issue could occur when pipe_ctx->plane_state is null. The fix adds a check to ensure 'pipe_ctx->plane_state' is not null before accessing. This prevents a null pointer dereference. Found by code review. (cherry picked from commit 63e6a77ccf239337baa9b1e7787cde9fa0462092)

In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Fix NULL Pointer Dereference in KFD queue Through KFD IOCTL Fuzzing we encountered a NULL pointer derefrence when calling kfd_queue_acquire_buffers. (cherry picked from commit 049e5bf3c8406f87c3d8e1958e0a16804fa1d530)

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: Add check for mgmt_alloc_skb() in mgmt_remote_name() Add check for the return value of mgmt_alloc_skb() in mgmt_remote_name() to prevent null pointer dereference.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: Add check for mgmt_alloc_skb() in mgmt_device_connected() Add check for the return value of mgmt_alloc_skb() in mgmt_device_connected() to prevent null pointer dereference.

In the Linux kernel, the following vulnerability has been resolved: rapidio: add check for rio_add_net() in rio_scan_alloc_net() The return value of rio_add_net() should be checked. If it fails, put_device() should be called to free the memory and give up the reference initialized in rio_add_net().

In the Linux kernel, the following vulnerability has been resolved: arm: pgtable: fix NULL pointer dereference issue When update_mmu_cache_range() is called by update_mmu_cache(), the vmf parameter is NULL, which will cause a NULL pointer dereference issue in adjust_pte(): Unable to handle kernel NULL pointer dereference at virtual address 00000030 when read Hardware name: Atmel AT91SAM9 PC is at update_mmu_cache_range+0x1e0/0x278 LR is at pte_offset_map_rw_nolock+0x18/0x2c Call trace: update_mmu_cache_range from remove_migration_pte+0x29c/0x2ec remove_migration_pte from rmap_walk_file+0xcc/0x130 rmap_walk_file from remove_migration_ptes+0x90/0xa4 remove_migration_ptes from migrate_pages_batch+0x6d4/0x858 migrate_pages_batch from migrate_pages+0x188/0x488 migrate_pages from compact_zone+0x56c/0x954 compact_zone from compact_node+0x90/0xf0 compact_node from kcompactd+0x1d4/0x204 kcompactd from kthread+0x120/0x12c kthread from ret_from_fork+0x14/0x38 Exception stack(0xc0d8bfb0 to 0xc0d8bff8) To fix it, do not rely on whether 'ptl' is equal to decide whether to hold the pte lock, but decide it by whether CONFIG_SPLIT_PTE_PTLOCKS is enabled. In addition, if two vmas map to the same PTE page, there is no need to hold the pte lock again, otherwise a deadlock will occur. Just add the need_lock parameter to let adjust_pte() know this information.

In the Linux kernel, the following vulnerability has been resolved: hwpoison, memory_hotplug: lock folio before unmap hwpoisoned folio Commit b15c87263a69 ("hwpoison, memory_hotplug: allow hwpoisoned pages to be offlined) add page poison checks in do_migrate_range in order to make offline hwpoisoned page possible by introducing isolate_lru_page and try_to_unmap for hwpoisoned page. However folio lock must be held before calling try_to_unmap. Add it to fix this problem. Warning will be produced if folio is not locked during unmap: ------------[ cut here ]------------ kernel BUG at ./include/linux/swapops.h:400! Internal error: Oops - BUG: 00000000f2000800 [#1] PREEMPT SMP Modules linked in: CPU: 4 UID: 0 PID: 411 Comm: bash Tainted: G W 6.13.0-rc1-00016-g3c434c7ee82a-dirty #41 Tainted: [W]=WARN Hardware name: QEMU QEMU Virtual Machine, BIOS 0.0.0 02/06/2015 pstate: 40400005 (nZcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : try_to_unmap_one+0xb08/0xd3c lr : try_to_unmap_one+0x3dc/0xd3c Call trace: try_to_unmap_one+0xb08/0xd3c (P) try_to_unmap_one+0x3dc/0xd3c (L) rmap_walk_anon+0xdc/0x1f8 rmap_walk+0x3c/0x58 try_to_unmap+0x88/0x90 unmap_poisoned_folio+0x30/0xa8 do_migrate_range+0x4a0/0x568 offline_pages+0x5a4/0x670 memory_block_action+0x17c/0x374 memory_subsys_offline+0x3c/0x78 device_offline+0xa4/0xd0 state_store+0x8c/0xf0 dev_attr_store+0x18/0x2c sysfs_kf_write+0x44/0x54 kernfs_fop_write_iter+0x118/0x1a8 vfs_write+0x3a8/0x4bc ksys_write+0x6c/0xf8 __arm64_sys_write+0x1c/0x28 invoke_syscall+0x44/0x100 el0_svc_common.constprop.0+0x40/0xe0 do_el0_svc+0x1c/0x28 el0_svc+0x30/0xd0 el0t_64_sync_handler+0xc8/0xcc el0t_64_sync+0x198/0x19c Code: f9407be0 b5fff320 d4210000 17ffff97 (d4210000) ---[ end trace 0000000000000000 ]---

In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mvm: don't try to talk to a dead firmware This fixes: bad state = 0 WARNING: CPU: 10 PID: 702 at drivers/net/wireless/inel/iwlwifi/iwl-trans.c:178 iwl_trans_send_cmd+0xba/0xe0 [iwlwifi] Call Trace: <TASK> ? __warn+0xca/0x1c0 ? iwl_trans_send_cmd+0xba/0xe0 [iwlwifi 64fa9ad799a0e0d2ba53d4af93a53ad9a531f8d4] iwl_fw_dbg_clear_monitor_buf+0xd7/0x110 [iwlwifi 64fa9ad799a0e0d2ba53d4af93a53ad9a531f8d4] _iwl_dbgfs_fw_dbg_clear_write+0xe2/0x120 [iwlmvm 0e8adb18cea92d2c341766bcc10b18699290068a] Ask whether the firmware is alive before sending a command.

In the Linux kernel, the following vulnerability has been resolved: llc: do not use skb_get() before dev_queue_xmit() syzbot is able to crash hosts [1], using llc and devices not supporting IFF_TX_SKB_SHARING. In this case, e1000 driver calls eth_skb_pad(), while the skb is shared. Simply replace skb_get() by skb_clone() in net/llc/llc_s_ac.c Note that e1000 driver might have an issue with pktgen, because it does not clear IFF_TX_SKB_SHARING, this is an orthogonal change. We need to audit other skb_get() uses in net/llc. [1] kernel BUG at net/core/skbuff.c:2178 ! Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN NOPTI CPU: 0 UID: 0 PID: 16371 Comm: syz.2.2764 Not tainted 6.14.0-rc4-syzkaller-00052-gac9c34d1e45a #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 RIP: 0010:pskb_expand_head+0x6ce/0x1240 net/core/skbuff.c:2178 Call Trace: <TASK> __skb_pad+0x18a/0x610 net/core/skbuff.c:2466 __skb_put_padto include/linux/skbuff.h:3843 [inline] skb_put_padto include/linux/skbuff.h:3862 [inline] eth_skb_pad include/linux/etherdevice.h:656 [inline] e1000_xmit_frame+0x2d99/0x5800 drivers/net/ethernet/intel/e1000/e1000_main.c:3128 __netdev_start_xmit include/linux/netdevice.h:5151 [inline] netdev_start_xmit include/linux/netdevice.h:5160 [inline] xmit_one net/core/dev.c:3806 [inline] dev_hard_start_xmit+0x9a/0x7b0 net/core/dev.c:3822 sch_direct_xmit+0x1ae/0xc30 net/sched/sch_generic.c:343 __dev_xmit_skb net/core/dev.c:4045 [inline] __dev_queue_xmit+0x13d4/0x43e0 net/core/dev.c:4621 dev_queue_xmit include/linux/netdevice.h:3313 [inline] llc_sap_action_send_test_c+0x268/0x320 net/llc/llc_s_ac.c:144 llc_exec_sap_trans_actions net/llc/llc_sap.c:153 [inline] llc_sap_next_state net/llc/llc_sap.c:182 [inline] llc_sap_state_process+0x239/0x510 net/llc/llc_sap.c:209 llc_ui_sendmsg+0xd0d/0x14e0 net/llc/af_llc.c:993 sock_sendmsg_nosec net/socket.c:718 [inline]

In the Linux kernel, the following vulnerability has been resolved: ppp: Fix KMSAN uninit-value warning with bpf Syzbot caught an "KMSAN: uninit-value" warning [1], which is caused by the ppp driver not initializing a 2-byte header when using socket filter. The following code can generate a PPP filter BPF program: ''' struct bpf_program fp; pcap_t *handle; handle = pcap_open_dead(DLT_PPP_PPPD, 65535); pcap_compile(handle, &fp, "ip and outbound", 0, 0); bpf_dump(&fp, 1); ''' Its output is: ''' (000) ldh [2] (001) jeq #0x21 jt 2 jf 5 (002) ldb [0] (003) jeq #0x1 jt 4 jf 5 (004) ret #65535 (005) ret #0 ''' Wen can find similar code at the following link: https://github.com/ppp-project/ppp/blob/master/pppd/options.c#L1680 The maintainer of this code repository is also the original maintainer of the ppp driver. As you can see the BPF program skips 2 bytes of data and then reads the 'Protocol' field to determine if it's an IP packet. Then it read the first byte of the first 2 bytes to determine the direction. The issue is that only the first byte indicating direction is initialized in current ppp driver code while the second byte is not initialized. For normal BPF programs generated by libpcap, uninitialized data won't be used, so it's not a problem. However, for carefully crafted BPF programs, such as those generated by syzkaller [2], which start reading from offset 0, the uninitialized data will be used and caught by KMSAN. [1] https://syzkaller.appspot.com/bug?extid=853242d9c9917165d791 [2] https://syzkaller.appspot.com/text?tag=ReproC&x=11994913980000

In the Linux kernel, the following vulnerability has been resolved: net: ethtool: netlink: Allow NULL nlattrs when getting a phy_device ethnl_req_get_phydev() is used to lookup a phy_device, in the case an ethtool netlink command targets a specific phydev within a netdev's topology. It takes as a parameter a const struct nlattr *header that's used for error handling : if (!phydev) { NL_SET_ERR_MSG_ATTR(extack, header, "no phy matching phyindex"); return ERR_PTR(-ENODEV); } In the notify path after a ->set operation however, there's no request attributes available. The typical callsite for the above function looks like: phydev = ethnl_req_get_phydev(req_base, tb[ETHTOOL_A_XXX_HEADER], info->extack); So, when tb is NULL (such as in the ethnl notify path), we have a nice crash. It turns out that there's only the PLCA command that is in that case, as the other phydev-specific commands don't have a notification. This commit fixes the crash by passing the cmd index and the nlattr array separately, allowing NULL-checking it directly inside the helper.

In the Linux kernel, the following vulnerability has been resolved: usb: typec: ucsi: Fix NULL pointer access Resources should be released only after all threads that utilize them have been destroyed. This commit ensures that resources are not released prematurely by waiting for the associated workqueue to complete before deallocating them.

In the Linux kernel, the following vulnerability has been resolved: usb: renesas_usbhs: Flush the notify_hotplug_work When performing continuous unbind/bind operations on the USB drivers available on the Renesas RZ/G2L SoC, a kernel crash with the message "Unable to handle kernel NULL pointer dereference at virtual address" may occur. This issue points to the usbhsc_notify_hotplug() function. Flush the delayed work to avoid its execution when driver resources are unavailable.

In the Linux kernel, the following vulnerability has been resolved: usb: atm: cxacru: fix a flaw in existing endpoint checks Syzbot once again identified a flaw in usb endpoint checking, see [1]. This time the issue stems from a commit authored by me (2eabb655a968 ("usb: atm: cxacru: fix endpoint checking in cxacru_bind()")). While using usb_find_common_endpoints() may usually be enough to discard devices with wrong endpoints, in this case one needs more than just finding and identifying the sufficient number of endpoints of correct types - one needs to check the endpoint's address as well. Since cxacru_bind() fills URBs with CXACRU_EP_CMD address in mind, switch the endpoint verification approach to usb_check_XXX_endpoints() instead to fix incomplete ep testing. [1] Syzbot report: usb 5-1: BOGUS urb xfer, pipe 3 != type 1 WARNING: CPU: 0 PID: 1378 at drivers/usb/core/urb.c:504 usb_submit_urb+0xc4e/0x18c0 drivers/usb/core/urb.c:503 ... RIP: 0010:usb_submit_urb+0xc4e/0x18c0 drivers/usb/core/urb.c:503 ... Call Trace: <TASK> cxacru_cm+0x3c8/0xe50 drivers/usb/atm/cxacru.c:649 cxacru_card_status drivers/usb/atm/cxacru.c:760 [inline] cxacru_bind+0xcf9/0x1150 drivers/usb/atm/cxacru.c:1223 usbatm_usb_probe+0x314/0x1d30 drivers/usb/atm/usbatm.c:1058 cxacru_usb_probe+0x184/0x220 drivers/usb/atm/cxacru.c:1377 usb_probe_interface+0x641/0xbb0 drivers/usb/core/driver.c:396 really_probe+0x2b9/0xad0 drivers/base/dd.c:658 __driver_probe_device+0x1a2/0x390 drivers/base/dd.c:800 driver_probe_device+0x50/0x430 drivers/base/dd.c:830 ...

In the Linux kernel, the following vulnerability has been resolved: x86/amd_nb: Use rdmsr_safe() in amd_get_mmconfig_range() Xen doesn't offer MSR_FAM10H_MMIO_CONF_BASE to all guests. This results in the following warning: unchecked MSR access error: RDMSR from 0xc0010058 at rIP: 0xffffffff8101d19f (xen_do_read_msr+0x7f/0xa0) Call Trace: xen_read_msr+0x1e/0x30 amd_get_mmconfig_range+0x2b/0x80 quirk_amd_mmconfig_area+0x28/0x100 pnp_fixup_device+0x39/0x50 __pnp_add_device+0xf/0x150 pnp_add_device+0x3d/0x100 pnpacpi_add_device_handler+0x1f9/0x280 acpi_ns_get_device_callback+0x104/0x1c0 acpi_ns_walk_namespace+0x1d0/0x260 acpi_get_devices+0x8a/0xb0 pnpacpi_init+0x50/0x80 do_one_initcall+0x46/0x2e0 kernel_init_freeable+0x1da/0x2f0 kernel_init+0x16/0x1b0 ret_from_fork+0x30/0x50 ret_from_fork_asm+0x1b/0x30 based on quirks for a "PNP0c01" device. Treating MMCFG as disabled is the right course of action, so no change is needed there. This was most likely exposed by fixing the Xen MSR accessors to not be silently-safe.

In the Linux kernel, the following vulnerability has been resolved: gpio: rcar: Use raw_spinlock to protect register access Use raw_spinlock in order to fix spurious messages about invalid context when spinlock debugging is enabled. The lock is only used to serialize register access. [ 4.239592] ============================= [ 4.239595] [ BUG: Invalid wait context ] [ 4.239599] 6.13.0-rc7-arm64-renesas-05496-gd088502a519f #35 Not tainted [ 4.239603] ----------------------------- [ 4.239606] kworker/u8:5/76 is trying to lock: [ 4.239609] ffff0000091898a0 (&p->lock){....}-{3:3}, at: gpio_rcar_config_interrupt_input_mode+0x34/0x164 [ 4.239641] other info that might help us debug this: [ 4.239643] context-{5:5} [ 4.239646] 5 locks held by kworker/u8:5/76: [ 4.239651] #0: ffff0000080fb148 ((wq_completion)async){+.+.}-{0:0}, at: process_one_work+0x190/0x62c [ 4.250180] OF: /soc/sound@ec500000/ports/port@0/endpoint: Read of boolean property 'frame-master' with a value. [ 4.254094] #1: ffff80008299bd80 ((work_completion)(&entry->work)){+.+.}-{0:0}, at: process_one_work+0x1b8/0x62c [ 4.254109] #2: ffff00000920c8f8 [ 4.258345] OF: /soc/sound@ec500000/ports/port@1/endpoint: Read of boolean property 'bitclock-master' with a value. [ 4.264803] (&dev->mutex){....}-{4:4}, at: __device_attach_async_helper+0x3c/0xdc [ 4.264820] #3: ffff00000a50ca40 (request_class#2){+.+.}-{4:4}, at: __setup_irq+0xa0/0x690 [ 4.264840] #4: [ 4.268872] OF: /soc/sound@ec500000/ports/port@1/endpoint: Read of boolean property 'frame-master' with a value. [ 4.273275] ffff00000a50c8c8 (lock_class){....}-{2:2}, at: __setup_irq+0xc4/0x690 [ 4.296130] renesas_sdhi_internal_dmac ee100000.mmc: mmc1 base at 0x00000000ee100000, max clock rate 200 MHz [ 4.304082] stack backtrace: [ 4.304086] CPU: 1 UID: 0 PID: 76 Comm: kworker/u8:5 Not tainted 6.13.0-rc7-arm64-renesas-05496-gd088502a519f #35 [ 4.304092] Hardware name: Renesas Salvator-X 2nd version board based on r8a77965 (DT) [ 4.304097] Workqueue: async async_run_entry_fn [ 4.304106] Call trace: [ 4.304110] show_stack+0x14/0x20 (C) [ 4.304122] dump_stack_lvl+0x6c/0x90 [ 4.304131] dump_stack+0x14/0x1c [ 4.304138] __lock_acquire+0xdfc/0x1584 [ 4.426274] lock_acquire+0x1c4/0x33c [ 4.429942] _raw_spin_lock_irqsave+0x5c/0x80 [ 4.434307] gpio_rcar_config_interrupt_input_mode+0x34/0x164 [ 4.440061] gpio_rcar_irq_set_type+0xd4/0xd8 [ 4.444422] __irq_set_trigger+0x5c/0x178 [ 4.448435] __setup_irq+0x2e4/0x690 [ 4.452012] request_threaded_irq+0xc4/0x190 [ 4.456285] devm_request_threaded_irq+0x7c/0xf4 [ 4.459398] ata1: link resume succeeded after 1 retries [ 4.460902] mmc_gpiod_request_cd_irq+0x68/0xe0 [ 4.470660] mmc_start_host+0x50/0xac [ 4.474327] mmc_add_host+0x80/0xe4 [ 4.477817] tmio_mmc_host_probe+0x2b0/0x440 [ 4.482094] renesas_sdhi_probe+0x488/0x6f4 [ 4.486281] renesas_sdhi_internal_dmac_probe+0x60/0x78 [ 4.491509] platform_probe+0x64/0xd8 [ 4.495178] really_probe+0xb8/0x2a8 [ 4.498756] __driver_probe_device+0x74/0x118 [ 4.503116] driver_probe_device+0x3c/0x154 [ 4.507303] __device_attach_driver+0xd4/0x160 [ 4.511750] bus_for_each_drv+0x84/0xe0 [ 4.515588] __device_attach_async_helper+0xb0/0xdc [ 4.520470] async_run_entry_fn+0x30/0xd8 [ 4.524481] process_one_work+0x210/0x62c [ 4.528494] worker_thread+0x1ac/0x340 [ 4.532245] kthread+0x10c/0x110 [ 4.535476] ret_from_fork+0x10/0x20

In the Linux kernel, the following vulnerability has been resolved: drm/imagination: avoid deadlock on fence release Do scheduler queue fence release processing on a workqueue, rather than in the release function itself. Fixes deadlock issues such as the following: [ 607.400437] ============================================ [ 607.405755] WARNING: possible recursive locking detected [ 607.415500] -------------------------------------------- [ 607.420817] weston:zfq0/24149 is trying to acquire lock: [ 607.426131] ffff000017d041a0 (reservation_ww_class_mutex){+.+.}-{3:3}, at: pvr_gem_object_vunmap+0x40/0xc0 [powervr] [ 607.436728] but task is already holding lock: [ 607.442554] ffff000017d105a0 (reservation_ww_class_mutex){+.+.}-{3:3}, at: dma_buf_ioctl+0x250/0x554 [ 607.451727] other info that might help us debug this: [ 607.458245] Possible unsafe locking scenario: [ 607.464155] CPU0 [ 607.466601] ---- [ 607.469044] lock(reservation_ww_class_mutex); [ 607.473584] lock(reservation_ww_class_mutex); [ 607.478114] *** DEADLOCK ***

In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: regulatory: improve invalid hints checking Syzbot keeps reporting an issue [1] that occurs when erroneous symbols sent from userspace get through into user_alpha2[] via regulatory_hint_user() call. Such invalid regulatory hints should be rejected. While a sanity check from commit 47caf685a685 ("cfg80211: regulatory: reject invalid hints") looks to be enough to deter these very cases, there is a way to get around it due to 2 reasons. 1) The way isalpha() works, symbols other than latin lower and upper letters may be used to determine a country/domain. For instance, greek letters will also be considered upper/lower letters and for such characters isalpha() will return true as well. However, ISO-3166-1 alpha2 codes should only hold latin characters. 2) While processing a user regulatory request, between reg_process_hint_user() and regulatory_hint_user() there happens to be a call to queue_regulatory_request() which modifies letters in request->alpha2[] with toupper(). This works fine for latin symbols, less so for weird letter characters from the second part of _ctype[]. Syzbot triggers a warning in is_user_regdom_saved() by first sending over an unexpected non-latin letter that gets malformed by toupper() into a character that ends up failing isalpha() check. Prevent this by enhancing is_an_alpha2() to ensure that incoming symbols are latin letters and nothing else. [1] Syzbot report: ------------[ cut here ]------------ Unexpected user alpha2: A� WARNING: CPU: 1 PID: 964 at net/wireless/reg.c:442 is_user_regdom_saved net/wireless/reg.c:440 [inline] WARNING: CPU: 1 PID: 964 at net/wireless/reg.c:442 restore_alpha2 net/wireless/reg.c:3424 [inline] WARNING: CPU: 1 PID: 964 at net/wireless/reg.c:442 restore_regulatory_settings+0x3c0/0x1e50 net/wireless/reg.c:3516 Modules linked in: CPU: 1 UID: 0 PID: 964 Comm: kworker/1:2 Not tainted 6.12.0-rc5-syzkaller-00044-gc1e939a21eb1 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 Workqueue: events_power_efficient crda_timeout_work RIP: 0010:is_user_regdom_saved net/wireless/reg.c:440 [inline] RIP: 0010:restore_alpha2 net/wireless/reg.c:3424 [inline] RIP: 0010:restore_regulatory_settings+0x3c0/0x1e50 net/wireless/reg.c:3516 ... Call Trace: <TASK> crda_timeout_work+0x27/0x50 net/wireless/reg.c:542 process_one_work kernel/workqueue.c:3229 [inline] process_scheduled_works+0xa65/0x1850 kernel/workqueue.c:3310 worker_thread+0x870/0xd30 kernel/workqueue.c:3391 kthread+0x2f2/0x390 kernel/kthread.c:389 ret_from_fork+0x4d/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 </TASK>

In the Linux kernel, the following vulnerability has been resolved: wifi: nl80211: reject cooked mode if it is set along with other flags It is possible to set both MONITOR_FLAG_COOK_FRAMES and MONITOR_FLAG_ACTIVE flags simultaneously on the same monitor interface from the userspace. This causes a sub-interface to be created with no IEEE80211_SDATA_IN_DRIVER bit set because the monitor interface is in the cooked state and it takes precedence over all other states. When the interface is then being deleted the kernel calls WARN_ONCE() from check_sdata_in_driver() because of missing that bit. Fix this by rejecting MONITOR_FLAG_COOK_FRAMES if it is set along with other flags. Found by Linux Verification Center (linuxtesting.org) with Syzkaller.

In the Linux kernel, the following vulnerability has been resolved: NFS: fix nfs_release_folio() to not deadlock via kcompactd writeback Add PF_KCOMPACTD flag and current_is_kcompactd() helper to check for it so nfs_release_folio() can skip calling nfs_wb_folio() from kcompactd. Otherwise NFS can deadlock waiting for kcompactd enduced writeback which recurses back to NFS (which triggers writeback to NFSD via NFS loopback mount on the same host, NFSD blocks waiting for XFS's call to __filemap_get_folio): 6070.550357] INFO: task kcompactd0:58 blocked for more than 4435 seconds. {--- [58] "kcompactd0" [<0>] folio_wait_bit+0xe8/0x200 [<0>] folio_wait_writeback+0x2b/0x80 [<0>] nfs_wb_folio+0x80/0x1b0 [nfs] [<0>] nfs_release_folio+0x68/0x130 [nfs] [<0>] split_huge_page_to_list_to_order+0x362/0x840 [<0>] migrate_pages_batch+0x43d/0xb90 [<0>] migrate_pages_sync+0x9a/0x240 [<0>] migrate_pages+0x93c/0x9f0 [<0>] compact_zone+0x8e2/0x1030 [<0>] compact_node+0xdb/0x120 [<0>] kcompactd+0x121/0x2e0 [<0>] kthread+0xcf/0x100 [<0>] ret_from_fork+0x31/0x40 [<0>] ret_from_fork_asm+0x1a/0x30 ---} [akpm@linux-foundation.org: fix build]

In the Linux kernel, the following vulnerability has been resolved: mm: memory-failure: update ttu flag inside unmap_poisoned_folio Patch series "mm: memory_failure: unmap poisoned folio during migrate properly", v3. Fix two bugs during folio migration if the folio is poisoned. This patch (of 3): Commit 6da6b1d4a7df ("mm/hwpoison: convert TTU_IGNORE_HWPOISON to TTU_HWPOISON") introduce TTU_HWPOISON to replace TTU_IGNORE_HWPOISON in order to stop send SIGBUS signal when accessing an error page after a memory error on a clean folio. However during page migration, anon folio must be set with TTU_HWPOISON during unmap_*(). For pagecache we need some policy just like the one in hwpoison_user_mappings to set this flag. So move this policy from hwpoison_user_mappings to unmap_poisoned_folio to handle this warning properly. Warning will be produced during unamp poison folio with the following log: ------------[ cut here ]------------ WARNING: CPU: 1 PID: 365 at mm/rmap.c:1847 try_to_unmap_one+0x8fc/0xd3c Modules linked in: CPU: 1 UID: 0 PID: 365 Comm: bash Tainted: G W 6.13.0-rc1-00018-gacdb4bbda7ab #42 Tainted: [W]=WARN Hardware name: QEMU QEMU Virtual Machine, BIOS 0.0.0 02/06/2015 pstate: 20400005 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : try_to_unmap_one+0x8fc/0xd3c lr : try_to_unmap_one+0x3dc/0xd3c Call trace: try_to_unmap_one+0x8fc/0xd3c (P) try_to_unmap_one+0x3dc/0xd3c (L) rmap_walk_anon+0xdc/0x1f8 rmap_walk+0x3c/0x58 try_to_unmap+0x88/0x90 unmap_poisoned_folio+0x30/0xa8 do_migrate_range+0x4a0/0x568 offline_pages+0x5a4/0x670 memory_block_action+0x17c/0x374 memory_subsys_offline+0x3c/0x78 device_offline+0xa4/0xd0 state_store+0x8c/0xf0 dev_attr_store+0x18/0x2c sysfs_kf_write+0x44/0x54 kernfs_fop_write_iter+0x118/0x1a8 vfs_write+0x3a8/0x4bc ksys_write+0x6c/0xf8 __arm64_sys_write+0x1c/0x28 invoke_syscall+0x44/0x100 el0_svc_common.constprop.0+0x40/0xe0 do_el0_svc+0x1c/0x28 el0_svc+0x30/0xd0 el0t_64_sync_handler+0xc8/0xcc el0t_64_sync+0x198/0x19c ---[ end trace 0000000000000000 ]--- [mawupeng1@huawei.com: unmap_poisoned_folio(): remove shadowed local `mapping', per Miaohe]

In the Linux kernel, the following vulnerability has been resolved: caif_virtio: fix wrong pointer check in cfv_probe() del_vqs() frees virtqueues, therefore cfv->vq_tx pointer should be checked for NULL before calling it, not cfv->vdev. Also the current implementation is redundant because the pointer cfv->vdev is dereferenced before it is checked for NULL. Fix this by checking cfv->vq_tx for NULL instead of cfv->vdev before calling del_vqs().

In the Linux kernel, the following vulnerability has been resolved: mctp i3c: handle NULL header address daddr can be NULL if there is no neighbour table entry present, in that case the tx packet should be dropped. saddr will usually be set by MCTP core, but check for NULL in case a packet is transmitted by a different protocol.

In the Linux kernel, the following vulnerability has been resolved: acpi: typec: ucsi: Introduce a ->poll_cci method For the ACPI backend of UCSI the UCSI "registers" are just a memory copy of the register values in an opregion. The ACPI implementation in the BIOS ensures that the opregion contents are synced to the embedded controller and it ensures that the registers (in particular CCI) are synced back to the opregion on notifications. While there is an ACPI call that syncs the actual registers to the opregion there is rarely a need to do this and on some ACPI implementations it actually breaks in various interesting ways. The only reason to force a sync from the embedded controller is to poll CCI while notifications are disabled. Only the ucsi core knows if this is the case and guessing based on the current command is suboptimal, i.e. leading to the following spurious assertion splat: WARNING: CPU: 3 PID: 76 at drivers/usb/typec/ucsi/ucsi.c:1388 ucsi_reset_ppm+0x1b4/0x1c0 [typec_ucsi] CPU: 3 UID: 0 PID: 76 Comm: kworker/3:0 Not tainted 6.12.11-200.fc41.x86_64 #1 Hardware name: LENOVO 21D0/LNVNB161216, BIOS J6CN45WW 03/17/2023 Workqueue: events_long ucsi_init_work [typec_ucsi] RIP: 0010:ucsi_reset_ppm+0x1b4/0x1c0 [typec_ucsi] Call Trace: <TASK> ucsi_init_work+0x3c/0xac0 [typec_ucsi] process_one_work+0x179/0x330 worker_thread+0x252/0x390 kthread+0xd2/0x100 ret_from_fork+0x34/0x50 ret_from_fork_asm+0x1a/0x30 </TASK> Thus introduce a ->poll_cci() method that works like ->read_cci() with an additional forced sync and document that this should be used when polling with notifications disabled. For all other backends that presumably don't have this issue use the same implementation for both methods.

In the Linux kernel, the following vulnerability has been resolved: ftrace: Avoid potential division by zero in function_stat_show() Check whether denominator expression x * (x - 1) * 1000 mod {2^32, 2^64} produce zero and skip stddev computation in that case. For now don't care about rec->counter * rec->counter overflow because rec->time * rec->time overflow will likely happen earlier.

In the Linux kernel, the following vulnerability has been resolved: sched_ext: Fix pick_task_scx() picking non-queued tasks when it's called without balance() a6250aa251ea ("sched_ext: Handle cases where pick_task_scx() is called without preceding balance_scx()") added a workaround to handle the cases where pick_task_scx() is called without prececing balance_scx() which is due to a fair class bug where pick_taks_fair() may return NULL after a true return from balance_fair(). The workaround detects when pick_task_scx() is called without preceding balance_scx() and emulates SCX_RQ_BAL_KEEP and triggers kicking to avoid stalling. Unfortunately, the workaround code was testing whether @prev was on SCX to decide whether to keep the task running. This is incorrect as the task may be on SCX but no longer runnable. This could lead to a non-runnable task to be returned from pick_task_scx() which cause interesting confusions and failures. e.g. A common failure mode is the task ending up with (!on_rq && on_cpu) state which can cause potential wakers to busy loop, which can easily lead to deadlocks. Fix it by testing whether @prev has SCX_TASK_QUEUED set. This makes @prev_on_scx only used in one place. Open code the usage and improve the comment while at it.

In the Linux kernel, the following vulnerability has been resolved: perf/core: Order the PMU list to fix warning about unordered pmu_ctx_list Syskaller triggers a warning due to prev_epc->pmu != next_epc->pmu in perf_event_swap_task_ctx_data(). vmcore shows that two lists have the same perf_event_pmu_context, but not in the same order. The problem is that the order of pmu_ctx_list for the parent is impacted by the time when an event/PMU is added. While the order for a child is impacted by the event order in the pinned_groups and flexible_groups. So the order of pmu_ctx_list in the parent and child may be different. To fix this problem, insert the perf_event_pmu_context to its proper place after iteration of the pmu_ctx_list. The follow testcase can trigger above warning: # perf record -e cycles --call-graph lbr -- taskset -c 3 ./a.out & # perf stat -e cpu-clock,cs -p xxx // xxx is the pid of a.out test.c void main() { int count = 0; pid_t pid; printf("%d running\n", getpid()); sleep(30); printf("running\n"); pid = fork(); if (pid == -1) { printf("fork error\n"); return; } if (pid == 0) { while (1) { count++; } } else { while (1) { count++; } } } The testcase first opens an LBR event, so it will allocate task_ctx_data, and then open tracepoint and software events, so the parent context will have 3 different perf_event_pmu_contexts. On inheritance, child ctx will insert the perf_event_pmu_context in another order and the warning will trigger. [ mingo: Tidied up the changelog. ]

In the Linux kernel, the following vulnerability has been resolved: net: enetc: VFs do not support HWTSTAMP_TX_ONESTEP_SYNC Actually ENETC VFs do not support HWTSTAMP_TX_ONESTEP_SYNC because only ENETC PF can access PMa_SINGLE_STEP registers. And there will be a crash if VFs are used to test one-step timestamp, the crash log as follows. [ 129.110909] Unable to handle kernel paging request at virtual address 00000000000080c0 [ 129.287769] Call trace: [ 129.290219] enetc_port_mac_wr+0x30/0xec (P) [ 129.294504] enetc_start_xmit+0xda4/0xe74 [ 129.298525] enetc_xmit+0x70/0xec [ 129.301848] dev_hard_start_xmit+0x98/0x118