CVE Database

In the Linux kernel, the following vulnerability has been resolved: iio: light: Add check for array bounds in veml6075_read_int_time_ms The array contains only 5 elements, but the index calculated by veml6075_read_int_time_index can range from 0 to 7, which could lead to out-of-bounds access. The check prevents this issue. Coverity Issue CID 1574309: (#1 of 1): Out-of-bounds read (OVERRUN) overrun-local: Overrunning array veml6075_it_ms of 5 4-byte elements at element index 7 (byte offset 31) using index int_index (which evaluates to 7) This is hardening against potentially broken hardware. Good to have but not necessary to backport.

In the Linux kernel, the following vulnerability has been resolved: objtool, spi: amd: Fix out-of-bounds stack access in amd_set_spi_freq() If speed_hz < AMD_SPI_MIN_HZ, amd_set_spi_freq() iterates over the entire amd_spi_freq array without breaking out early, causing 'i' to go beyond the array bounds. Fix that by stopping the loop when it gets to the last entry, so the low speed_hz value gets clamped up to AMD_SPI_MIN_HZ. Fixes the following warning with an UBSAN kernel: drivers/spi/spi-amd.o: error: objtool: amd_set_spi_freq() falls through to next function amd_spi_set_opcode()

In the Linux kernel, the following vulnerability has been resolved: ASoC: simple-card-utils: Don't use __free(device_node) at graph_util_parse_dai() commit 419d1918105e ("ASoC: simple-card-utils: use __free(device_node) for device node") uses __free(device_node) for dlc->of_node, but we need to keep it while driver is in use. Don't use __free(device_node) in graph_util_parse_dai().

In the Linux kernel, the following vulnerability has been resolved: objtool, nvmet: Fix out-of-bounds stack access in nvmet_ctrl_state_show() The csts_state_names[] array only has six sparse entries, but the iteration code in nvmet_ctrl_state_show() iterates seven, resulting in a potential out-of-bounds stack read. Fix that. Fixes the following warning with an UBSAN kernel: vmlinux.o: warning: objtool: .text.nvmet_ctrl_state_show: unexpected end of section

In the Linux kernel, the following vulnerability has been resolved: jfs: fix slab-out-of-bounds read in ea_get() During the "size_check" label in ea_get(), the code checks if the extended attribute list (xattr) size matches ea_size. If not, it logs "ea_get: invalid extended attribute" and calls print_hex_dump(). Here, EALIST_SIZE(ea_buf->xattr) returns 4110417968, which exceeds INT_MAX (2,147,483,647). Then ea_size is clamped: int size = clamp_t(int, ea_size, 0, EALIST_SIZE(ea_buf->xattr)); Although clamp_t aims to bound ea_size between 0 and 4110417968, the upper limit is treated as an int, causing an overflow above 2^31 - 1. This leads "size" to wrap around and become negative (-184549328). The "size" is then passed to print_hex_dump() (called "len" in print_hex_dump()), it is passed as type size_t (an unsigned type), this is then stored inside a variable called "int remaining", which is then assigned to "int linelen" which is then passed to hex_dump_to_buffer(). In print_hex_dump() the for loop, iterates through 0 to len-1, where len is 18446744073525002176, calling hex_dump_to_buffer() on each iteration: for (i = 0; i < len; i += rowsize) { linelen = min(remaining, rowsize); remaining -= rowsize; hex_dump_to_buffer(ptr + i, linelen, rowsize, groupsize, linebuf, sizeof(linebuf), ascii); ... } The expected stopping condition (i < len) is effectively broken since len is corrupted and very large. This eventually leads to the "ptr+i" being passed to hex_dump_to_buffer() to get closer to the end of the actual bounds of "ptr", eventually an out of bounds access is done in hex_dump_to_buffer() in the following for loop: for (j = 0; j < len; j++) { if (linebuflen < lx + 2) goto overflow2; ch = ptr[j]; ... } To fix this we should validate "EALIST_SIZE(ea_buf->xattr)" before it is utilised.

In the Linux kernel, the following vulnerability has been resolved: nfsd: allow SC_STATUS_FREEABLE when searching via nfs4_lookup_stateid() The pynfs DELEG8 test fails when run against nfsd. It acquires a delegation and then lets the lease time out. It then tries to use the deleg stateid and expects to see NFS4ERR_DELEG_REVOKED, but it gets bad NFS4ERR_BAD_STATEID instead. When a delegation is revoked, it's initially marked with SC_STATUS_REVOKED, or SC_STATUS_ADMIN_REVOKED and later, it's marked with the SC_STATUS_FREEABLE flag, which denotes that it is waiting for s FREE_STATEID call. nfs4_lookup_stateid() accepts a statusmask that includes the status flags that a found stateid is allowed to have. Currently, that mask never includes SC_STATUS_FREEABLE, which means that revoked delegations are (almost) never found. Add SC_STATUS_FREEABLE to the always-allowed status flags, and remove it from nfsd4_delegreturn() since it's now always implied.

In the Linux kernel, the following vulnerability has been resolved: dmaengine: fsl-edma: free irq correctly in remove path Add fsl_edma->txirq/errirq check to avoid below warning because no errirq at i.MX9 platform. Otherwise there will be kernel dump: WARNING: CPU: 0 PID: 11 at kernel/irq/devres.c:144 devm_free_irq+0x74/0x80 Modules linked in: CPU: 0 UID: 0 PID: 11 Comm: kworker/u8:0 Not tainted 6.12.0-rc7#18 Hardware name: NXP i.MX93 11X11 EVK board (DT) Workqueue: events_unbound deferred_probe_work_func pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : devm_free_irq+0x74/0x80 lr : devm_free_irq+0x48/0x80 Call trace: devm_free_irq+0x74/0x80 (P) devm_free_irq+0x48/0x80 (L) fsl_edma_remove+0xc4/0xc8 platform_remove+0x28/0x44 device_remove+0x4c/0x80

In the Linux kernel, the following vulnerability has been resolved: LoongArch: BPF: Fix off-by-one error in build_prologue() Vincent reported that running BPF progs with tailcalls on LoongArch causes kernel hard lockup. Debugging the issues shows that the JITed image missing a jirl instruction at the end of the epilogue. There are two passes in JIT compiling, the first pass set the flags and the second pass generates JIT code based on those flags. With BPF progs mixing bpf2bpf and tailcalls, build_prologue() generates N insns in the first pass and then generates N+1 insns in the second pass. This makes epilogue_offset off by one and we will jump to some unexpected insn and cause lockup. Fix this by inserting a nop insn.

In the Linux kernel, the following vulnerability has been resolved: ext4: fix OOB read when checking dotdot dir Mounting a corrupted filesystem with directory which contains '.' dir entry with rec_len == block size results in out-of-bounds read (later on, when the corrupted directory is removed). ext4_empty_dir() assumes every ext4 directory contains at least '.' and '..' as directory entries in the first data block. It first loads the '.' dir entry, performs sanity checks by calling ext4_check_dir_entry() and then uses its rec_len member to compute the location of '..' dir entry (in ext4_next_entry). It assumes the '..' dir entry fits into the same data block. If the rec_len of '.' is precisely one block (4KB), it slips through the sanity checks (it is considered the last directory entry in the data block) and leaves "struct ext4_dir_entry_2 *de" point exactly past the memory slot allocated to the data block. The following call to ext4_check_dir_entry() on new value of de then dereferences this pointer which results in out-of-bounds mem access. Fix this by extending __ext4_check_dir_entry() to check for '.' dir entries that reach the end of data block. Make sure to ignore the phony dir entries for checksum (by checking name_len for non-zero). Note: This is reported by KASAN as use-after-free in case another structure was recently freed from the slot past the bound, but it is really an OOB read. This issue was found by syzkaller tool. Call Trace: [ 38.594108] BUG: KASAN: slab-use-after-free in __ext4_check_dir_entry+0x67e/0x710 [ 38.594649] Read of size 2 at addr ffff88802b41a004 by task syz-executor/5375 [ 38.595158] [ 38.595288] CPU: 0 UID: 0 PID: 5375 Comm: syz-executor Not tainted 6.14.0-rc7 #1 [ 38.595298] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 [ 38.595304] Call Trace: [ 38.595308] <TASK> [ 38.595311] dump_stack_lvl+0xa7/0xd0 [ 38.595325] print_address_description.constprop.0+0x2c/0x3f0 [ 38.595339] ? __ext4_check_dir_entry+0x67e/0x710 [ 38.595349] print_report+0xaa/0x250 [ 38.595359] ? __ext4_check_dir_entry+0x67e/0x710 [ 38.595368] ? kasan_addr_to_slab+0x9/0x90 [ 38.595378] kasan_report+0xab/0xe0 [ 38.595389] ? __ext4_check_dir_entry+0x67e/0x710 [ 38.595400] __ext4_check_dir_entry+0x67e/0x710 [ 38.595410] ext4_empty_dir+0x465/0x990 [ 38.595421] ? __pfx_ext4_empty_dir+0x10/0x10 [ 38.595432] ext4_rmdir.part.0+0x29a/0xd10 [ 38.595441] ? __dquot_initialize+0x2a7/0xbf0 [ 38.595455] ? __pfx_ext4_rmdir.part.0+0x10/0x10 [ 38.595464] ? __pfx___dquot_initialize+0x10/0x10 [ 38.595478] ? down_write+0xdb/0x140 [ 38.595487] ? __pfx_down_write+0x10/0x10 [ 38.595497] ext4_rmdir+0xee/0x140 [ 38.595506] vfs_rmdir+0x209/0x670 [ 38.595517] ? lookup_one_qstr_excl+0x3b/0x190 [ 38.595529] do_rmdir+0x363/0x3c0 [ 38.595537] ? __pfx_do_rmdir+0x10/0x10 [ 38.595544] ? strncpy_from_user+0x1ff/0x2e0 [ 38.595561] __x64_sys_unlinkat+0xf0/0x130 [ 38.595570] do_syscall_64+0x5b/0x180 [ 38.595583] entry_SYSCALL_64_after_hwframe+0x76/0x7e

Path Traversal: '.../...//' vulnerability in ThimPress Ivy School ivy-school allows PHP Local File Inclusion.This issue affects Ivy School: from n/a through <= 1.6.0.

Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in pantherius Modal Survey modal-survey.This issue affects Modal Survey: from n/a through <= 2.0.2.0.1.

The Avatar plugin for WordPress is vulnerable to arbitrary file deletion due to insufficient file path validation in a function in all versions up to, and including, 0.1.4. This makes it possible for authenticated attackers, with Subscriber-level access and above, to delete arbitrary files on the server, which can easily lead to remote code execution when the right file is deleted (such as wp-config.php).

Kernel software installed and running inside a Guest VM may exploit memory shared with the GPU Firmware to write data outside the Guest's virtualised GPU memory.

A Remote Code Execution (RCE) vulnerability was identified in GitHub Enterprise Server that allowed attackers to execute arbitrary code by exploiting the pre-receive hook functionality, potentially leading to privilege escalation and system compromise. The vulnerability involves using dynamically allocated ports that become temporarily available, such as during a hot patch upgrade. This means the vulnerability is only exploitable during specific operational conditions, which limits the attack window. Exploitation required either site administrator permissions to enable and configure pre-receive hooks or a user with permissions to modify repositories containing pre-receive hooks where this functionality was already enabled. This vulnerability affected all versions of GitHub Enterprise Server prior to 3.18 and was fixed in versions 3.17.1, 3.16.4, 3.15.8, 3.14.13, 3.13.16. This vulnerability was reported via the GitHub Bug Bounty program.

An improper neutralization of input vulnerability was identified in GitHub Enterprise Server that allowed cross-site scripting in GitHub Markdown that used `$$..$$` math blocks. Exploitation required access to the target GitHub Enterprise Server instance and privileged user interaction with the malicious elements. This vulnerability affected version 3.16.1 of GitHub Enterprise Server and was fixed in version 3.16.2. This vulnerability was reported via the GitHub Bug Bounty program.

An issue in a-blogcms 3.1.15 allows a remote attacker to obtain sensitive information via the /bid/1/admin/entry-edit/ path.

An issue in MyBB 1.8.38 allows a remote attacker to obtain sensitive information via the Add Mycode function. NOTE: the Supplier disputes this because of the allowed actions of Board administrators and because of SSRF mitigation.

An issue in MyBB 1.8.38 allows a remote attacker to obtain sensitive information via the Mail function. NOTE: the Supplier disputes this because of the allowed actions of Board administrators and because of SSRF mitigation.

An issue in MyBB 1.8.38 allows a remote attacker to obtain sensitive information via the Change Avatar function. NOTE: the Supplier disputes this because of the allowed actions of Board administrators and because of SSRF mitigation.

An issue in MyBB 1.8.38 allows a remote attacker to obtain sensitive information via the Import a Theme function. NOTE: the Supplier disputes this because of the allowed actions of Board administrators and because of SSRF mitigation.

An issue in Seo Panel 4.11.0 allows a remote attacker to obtain sensitive information via the Proxy Manager component.

An issue in Seo Panel 4.11.0 allows a remote attacker to obtain sensitive information via the Mail Setting component.

A vulnerability was found in PCMan FTP Server 2.0.7. It has been rated as critical. Affected by this issue is some unknown functionality of the component MPUT Command Handler. The manipulation leads to buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used.

Tenda AC10 V4.0si_V16.03.10.20 is vulnerable to Buffer Overflow in AdvSetMacMtuWan via wanMTU2.

Tenda AC10 V4.0si_V16.03.10.20 is vulnerable to Buffer Overflow in AdvSetMacMtuWan via wanSpeed2.

An issue in Think Router Tk-Rt-Wr135G V3.0.2-X000 allows attackers to bypass authentication via a crafted cookie.

In the Linux kernel, the following vulnerability has been resolved: can: peak_usb: fix use after free bugs After calling peak_usb_netif_rx_ni(skb), dereferencing skb is unsafe. Especially, the can_frame cf which aliases skb memory is accessed after the peak_usb_netif_rx_ni(). Reordering the lines solves the issue.

In the Linux kernel, the following vulnerability has been resolved: can: vxcan: vxcan_xmit: fix use after free bug After calling netif_rx_ni(skb), dereferencing skb is unsafe. Especially, the canfd_frame cfd which aliases skb memory is accessed after the netif_rx_ni().

In the Linux kernel, the following vulnerability has been resolved: can: dev: can_restart: fix use after free bug After calling netif_rx_ni(skb), dereferencing skb is unsafe. Especially, the can_frame cf which aliases skb memory is accessed after the netif_rx_ni() in: stats->rx_bytes += cf->len; Reordering the lines solves the issue.

IBM i 7.6  contains a privilege escalation vulnerability due to incorrect profile swapping in an OS command.  A malicious actor can use the command to elevate privileges to gain root access to the host operating system.