CVE Database

In the Linux kernel, the following vulnerability has been resolved: arm64: bpf: Add BHB mitigation to the epilogue for cBPF programs A malicious BPF program may manipulate the branch history to influence what the hardware speculates will happen next. On exit from a BPF program, emit the BHB mititgation sequence. This is only applied for 'classic' cBPF programs that are loaded by seccomp.

In the Linux kernel, the following vulnerability has been resolved: net: phy: allow MDIO bus PM ops to start/stop state machine for phylink-controlled PHY DSA has 2 kinds of drivers: 1. Those who call dsa_switch_suspend() and dsa_switch_resume() from their device PM ops: qca8k-8xxx, bcm_sf2, microchip ksz 2. Those who don't: all others. The above methods should be optional. For type 1, dsa_switch_suspend() calls dsa_user_suspend() -> phylink_stop(), and dsa_switch_resume() calls dsa_user_resume() -> phylink_start(). These seem good candidates for setting mac_managed_pm = true because that is essentially its definition [1], but that does not seem to be the biggest problem for now, and is not what this change focuses on. Talking strictly about the 2nd category of DSA drivers here (which do not have MAC managed PM, meaning that for their attached PHYs, mdio_bus_phy_suspend() and mdio_bus_phy_resume() should run in full), I have noticed that the following warning from mdio_bus_phy_resume() is triggered: WARN_ON(phydev->state != PHY_HALTED && phydev->state != PHY_READY && phydev->state != PHY_UP); because the PHY state machine is running. It's running as a result of a previous dsa_user_open() -> ... -> phylink_start() -> phy_start() having been initiated by the user. The previous mdio_bus_phy_suspend() was supposed to have called phy_stop_machine(), but it didn't. So this is why the PHY is in state PHY_NOLINK by the time mdio_bus_phy_resume() runs. mdio_bus_phy_suspend() did not call phy_stop_machine() because for phylink, the phydev->adjust_link function pointer is NULL. This seems a technicality introduced by commit fddd91016d16 ("phylib: fix PAL state machine restart on resume"). That commit was written before phylink existed, and was intended to avoid crashing with consumer drivers which don't use the PHY state machine - phylink always does, when using a PHY. But phylink itself has historically not been developed with suspend/resume in mind, and apparently not tested too much in that scenario, allowing this bug to exist unnoticed for so long. Plus, prior to the WARN_ON(), it would have likely been invisible. This issue is not in fact restricted to type 2 DSA drivers (according to the above ad-hoc classification), but can be extrapolated to any MAC driver with phylink and MDIO-bus-managed PHY PM ops. DSA is just where the issue was reported. Assuming mac_managed_pm is set correctly, a quick search indicates the following other drivers might be affected: $ grep -Zlr PHYLINK_NETDEV drivers/ | xargs -0 grep -L mac_managed_pm drivers/net/ethernet/atheros/ag71xx.c drivers/net/ethernet/microchip/sparx5/sparx5_main.c drivers/net/ethernet/microchip/lan966x/lan966x_main.c drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c drivers/net/ethernet/freescale/fs_enet/fs_enet-main.c drivers/net/ethernet/freescale/dpaa/dpaa_eth.c drivers/net/ethernet/freescale/ucc_geth.c drivers/net/ethernet/freescale/enetc/enetc_pf_common.c drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c drivers/net/ethernet/marvell/mvneta.c drivers/net/ethernet/marvell/prestera/prestera_main.c drivers/net/ethernet/mediatek/mtk_eth_soc.c drivers/net/ethernet/altera/altera_tse_main.c drivers/net/ethernet/wangxun/txgbe/txgbe_phy.c drivers/net/ethernet/meta/fbnic/fbnic_phylink.c drivers/net/ethernet/tehuti/tn40_phy.c drivers/net/ethernet/mscc/ocelot_net.c Make the existing conditions dependent on the PHY device having a phydev->phy_link_change() implementation equal to the default phy_link_change() provided by phylib. Otherwise, we implicitly know that the phydev has the phylink-provided phylink_phy_change() callback, and when phylink is used, the PHY state machine always needs to be stopped/ started on the suspend/resume path. The code is structured as such that if phydev->phy_link_change() is absent, it is a matter of time until the kernel will crash - no need to further complicate the test. Thus, for the situation where the PM is not managed b ---truncated---

In the Linux kernel, the following vulnerability has been resolved: ASoC: codecs: wcd937x: fix a potential memory leak in wcd937x_soc_codec_probe() When snd_soc_dapm_new_controls() or snd_soc_dapm_add_routes() fails, wcd937x_soc_codec_probe() returns without releasing 'wcd937x->clsh_info', which is allocated by wcd_clsh_ctrl_alloc. Add wcd_clsh_ctrl_free() to prevent potential memory leak.

In the Linux kernel, the following vulnerability has been resolved: ftrace: Add cond_resched() to ftrace_graph_set_hash() When the kernel contains a large number of functions that can be traced, the loop in ftrace_graph_set_hash() may take a lot of time to execute. This may trigger the softlockup watchdog. Add cond_resched() within the loop to allow the kernel to remain responsive even when processing a large number of functions. This matches the cond_resched() that is used in other locations of the code that iterates over all functions that can be traced.

In the Linux kernel, the following vulnerability has been resolved: libbpf: Fix accessing BTF.ext core_relo header Update btf_ext_parse_info() to ensure the core_relo header is present before reading its fields. This avoids a potential buffer read overflow reported by the OSS Fuzz project.

In the Linux kernel, the following vulnerability has been resolved: objtool, media: dib8000: Prevent divide-by-zero in dib8000_set_dds() If dib8000_set_dds()'s call to dib8000_read32() returns zero, the result is a divide-by-zero. Prevent that from happening. Fixes the following warning with an UBSAN kernel: drivers/media/dvb-frontends/dib8000.o: warning: objtool: dib8000_tune() falls through to next function dib8096p_cfg_DibRx()

In the Linux kernel, the following vulnerability has been resolved: octeon_ep: Fix host hang issue during device reboot When the host loses heartbeat messages from the device, the driver calls the device-specific ndo_stop function, which frees the resources. If the driver is unloaded in this scenario, it calls ndo_stop again, attempting to free resources that have already been freed, leading to a host hang issue. To resolve this, dev_close should be called instead of the device-specific stop function.dev_close internally calls ndo_stop to stop the network interface and performs additional cleanup tasks. During the driver unload process, if the device is already down, ndo_stop is not called.

In the Linux kernel, the following vulnerability has been resolved: sch_htb: make htb_qlen_notify() idempotent htb_qlen_notify() always deactivates the HTB class and in fact could trigger a warning if it is already deactivated. Therefore, it is not idempotent and not friendly to its callers, like fq_codel_dequeue(). Let's make it idempotent to ease qdisc_tree_reduce_backlog() callers' life.

In the Linux kernel, the following vulnerability has been resolved: drm/nouveau: Fix WARN_ON in nouveau_fence_context_kill() Nouveau is mostly designed in a way that it's expected that fences only ever get signaled through nouveau_fence_signal(). However, in at least one other place, nouveau_fence_done(), can signal fences, too. If that happens (race) a signaled fence remains in the pending list for a while, until it gets removed by nouveau_fence_update(). Should nouveau_fence_context_kill() run in the meantime, this would be a bug because the function would attempt to set an error code on an already signaled fence. Have nouveau_fence_context_kill() check for a fence being signaled.

In the Linux kernel, the following vulnerability has been resolved: arm64: errata: Add missing sentinels to Spectre-BHB MIDR arrays Commit a5951389e58d ("arm64: errata: Add newer ARM cores to the spectre_bhb_loop_affected() lists") added some additional CPUs to the Spectre-BHB workaround, including some new arrays for designs that require new 'k' values for the workaround to be effective. Unfortunately, the new arrays omitted the sentinel entry and so is_midr_in_range_list() will walk off the end when it doesn't find a match. With UBSAN enabled, this leads to a crash during boot when is_midr_in_range_list() is inlined (which was more common prior to c8c2647e69be ("arm64: Make  _midr_in_range_list() an exported function")): | Internal error: aarch64 BRK: 00000000f2000001 [#1] PREEMPT SMP | pstate: 804000c5 (Nzcv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--) | pc : spectre_bhb_loop_affected+0x28/0x30 | lr : is_spectre_bhb_affected+0x170/0x190 | [...] | Call trace: | spectre_bhb_loop_affected+0x28/0x30 | update_cpu_capabilities+0xc0/0x184 | init_cpu_features+0x188/0x1a4 | cpuinfo_store_boot_cpu+0x4c/0x60 | smp_prepare_boot_cpu+0x38/0x54 | start_kernel+0x8c/0x478 | __primary_switched+0xc8/0xd4 | Code: 6b09011f 54000061 52801080 d65f03c0 (d4200020) | ---[ end trace 0000000000000000 ]--- | Kernel panic - not syncing: aarch64 BRK: Fatal exception Add the missing sentinel entries.

In the Linux kernel, the following vulnerability has been resolved: book3s64/radix : Align section vmemmap start address to PAGE_SIZE A vmemmap altmap is a device-provided region used to provide backing storage for struct pages. For each namespace, the altmap should belong to that same namespace. If the namespaces are created unaligned, there is a chance that the section vmemmap start address could also be unaligned. If the section vmemmap start address is unaligned, the altmap page allocated from the current namespace might be used by the previous namespace also. During the free operation, since the altmap is shared between two namespaces, the previous namespace may detect that the page does not belong to its altmap and incorrectly assume that the page is a normal page. It then attempts to free the normal page, which leads to a kernel crash. Kernel attempted to read user page (18) - exploit attempt? (uid: 0) BUG: Kernel NULL pointer dereference on read at 0x00000018 Faulting instruction address: 0xc000000000530c7c Oops: Kernel access of bad area, sig: 11 [#1] LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA pSeries CPU: 32 PID: 2104 Comm: ndctl Kdump: loaded Tainted: G W NIP: c000000000530c7c LR: c000000000530e00 CTR: 0000000000007ffe REGS: c000000015e57040 TRAP: 0300 Tainted: G W MSR: 800000000280b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR: 84482404 CFAR: c000000000530dfc DAR: 0000000000000018 DSISR: 40000000 IRQMASK: 0 GPR00: c000000000530e00 c000000015e572e0 c000000002c5cb00 c00c000101008040 GPR04: 0000000000000000 0000000000000007 0000000000000001 000000000000001f GPR08: 0000000000000005 0000000000000000 0000000000000018 0000000000002000 GPR12: c0000000001d2fb0 c0000060de6b0080 0000000000000000 c0000060dbf90020 GPR16: c00c000101008000 0000000000000001 0000000000000000 c000000125b20f00 GPR20: 0000000000000001 0000000000000000 ffffffffffffffff c00c000101007fff GPR24: 0000000000000001 0000000000000000 0000000000000000 0000000000000000 GPR28: 0000000004040201 0000000000000001 0000000000000000 c00c000101008040 NIP [c000000000530c7c] get_pfnblock_flags_mask+0x7c/0xd0 LR [c000000000530e00] free_unref_page_prepare+0x130/0x4f0 Call Trace: free_unref_page+0x50/0x1e0 free_reserved_page+0x40/0x68 free_vmemmap_pages+0x98/0xe0 remove_pte_table+0x164/0x1e8 remove_pmd_table+0x204/0x2c8 remove_pud_table+0x1c4/0x288 remove_pagetable+0x1c8/0x310 vmemmap_free+0x24/0x50 section_deactivate+0x28c/0x2a0 __remove_pages+0x84/0x110 arch_remove_memory+0x38/0x60 memunmap_pages+0x18c/0x3d0 devm_action_release+0x30/0x50 release_nodes+0x68/0x140 devres_release_group+0x100/0x190 dax_pmem_compat_release+0x44/0x80 [dax_pmem_compat] device_for_each_child+0x8c/0x100 [dax_pmem_compat_remove+0x2c/0x50 [dax_pmem_compat] nvdimm_bus_remove+0x78/0x140 [libnvdimm] device_remove+0x70/0xd0 Another issue is that if there is no altmap, a PMD-sized vmemmap page will be allocated from RAM, regardless of the alignment of the section start address. If the section start address is not aligned to the PMD size, a VM_BUG_ON will be triggered when setting the PMD-sized page to page table. In this patch, we are aligning the section vmemmap start address to PAGE_SIZE. After alignment, the start address will not be part of the current namespace, and a normal page will be allocated for the vmemmap mapping of the current section. For the remaining sections, altmaps will be allocated. During the free operation, the normal page will be correctly freed. In the same way, a PMD_SIZE vmemmap page will be allocated only if the section start address is PMD_SIZE-aligned; otherwise, it will fall back to a PAGE-sized vmemmap allocation. Without this patch ================== NS1 start NS2 start _________________________________________________________ | NS1 | NS2 | --------------------------------------------------------- | Altmap| Altmap | .....|Altmap| Altmap | ........... | NS1 | NS1 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: ASoC: amd: acp: Fix NULL pointer deref in acp_i2s_set_tdm_slot Update chip data using dev_get_drvdata(dev->parent) to fix NULL pointer deref in acp_i2s_set_tdm_slot.

In the Linux kernel, the following vulnerability has been resolved: ice: Check VF VSI Pointer Value in ice_vc_add_fdir_fltr() As mentioned in the commit baeb705fd6a7 ("ice: always check VF VSI pointer values"), we need to perform a null pointer check on the return value of ice_get_vf_vsi() before using it.

In the Linux kernel, the following vulnerability has been resolved: ptp: ocp: Fix NULL dereference in Adva board SMA sysfs operations On Adva boards, SMA sysfs store/get operations can call __handle_signal_outputs() or __handle_signal_inputs() while the `irig` and `dcf` pointers are uninitialized, leading to a NULL pointer dereference in __handle_signal() and causing a kernel crash. Adva boards don't use `irig` or `dcf` functionality, so add Adva-specific callbacks `ptp_ocp_sma_adva_set_outputs()` and `ptp_ocp_sma_adva_set_inputs()` that avoid invoking `irig` or `dcf` input/output routines.

In the Linux kernel, the following vulnerability has been resolved: net: lan743x: Fix memleak issue when GSO enabled Always map the `skb` to the LS descriptor. Previously skb was mapped to EXT descriptor when the number of fragments is zero with GSO enabled. Mapping the skb to EXT descriptor prevents it from being freed, leading to a memory leak

In the Linux kernel, the following vulnerability has been resolved: accel/ivpu: Fix locking order in ivpu_job_submit Fix deadlock in job submission and abort handling. When a thread aborts currently executing jobs due to a fault, it first locks the global lock protecting submitted_jobs (#1). After the last job is destroyed, it proceeds to release the related context and locks file_priv (#2). Meanwhile, in the job submission thread, the file_priv lock (#2) is taken first, and then the submitted_jobs lock (#1) is obtained when a job is added to the submitted jobs list. CPU0 CPU1 ---- ---- (for example due to a fault) (jobs submissions keep coming) lock(&vdev->submitted_jobs_lock) #1 ivpu_jobs_abort_all() job_destroy() lock(&file_priv->lock) #2 lock(&vdev->submitted_jobs_lock) #1 file_priv_release() lock(&vdev->context_list_lock) lock(&file_priv->lock) #2 This order of locking causes a deadlock. To resolve this issue, change the order of locking in ivpu_job_submit().

In the Linux kernel, the following vulnerability has been resolved: firmware: arm_scmi: Balance device refcount when destroying devices Using device_find_child() to lookup the proper SCMI device to destroy causes an unbalance in device refcount, since device_find_child() calls an implicit get_device(): this, in turns, inhibits the call of the provided release methods upon devices destruction. As a consequence, one of the structures that is not freed properly upon destruction is the internal struct device_private dev->p populated by the drivers subsystem core. KMemleak detects this situation since loading/unloding some SCMI driver causes related devices to be created/destroyed without calling any device_release method. unreferenced object 0xffff00000f583800 (size 512): comm "insmod", pid 227, jiffies 4294912190 hex dump (first 32 bytes): 00 00 00 00 ad 4e ad de ff ff ff ff 00 00 00 00 .....N.......... ff ff ff ff ff ff ff ff 60 36 1d 8a 00 80 ff ff ........`6...... backtrace (crc 114e2eed): kmemleak_alloc+0xbc/0xd8 __kmalloc_cache_noprof+0x2dc/0x398 device_add+0x954/0x12d0 device_register+0x28/0x40 __scmi_device_create.part.0+0x1bc/0x380 scmi_device_create+0x2d0/0x390 scmi_create_protocol_devices+0x74/0xf8 scmi_device_request_notifier+0x1f8/0x2a8 notifier_call_chain+0x110/0x3b0 blocking_notifier_call_chain+0x70/0xb0 scmi_driver_register+0x350/0x7f0 0xffff80000a3b3038 do_one_initcall+0x12c/0x730 do_init_module+0x1dc/0x640 load_module+0x4b20/0x5b70 init_module_from_file+0xec/0x158 $ ./scripts/faddr2line ./vmlinux device_add+0x954/0x12d0 device_add+0x954/0x12d0: kmalloc_noprof at include/linux/slab.h:901 (inlined by) kzalloc_noprof at include/linux/slab.h:1037 (inlined by) device_private_init at drivers/base/core.c:3510 (inlined by) device_add at drivers/base/core.c:3561 Balance device refcount by issuing a put_device() on devices found via device_find_child().

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix the inode leak in btrfs_iget() [BUG] There is a bug report that a syzbot reproducer can lead to the following busy inode at unmount time: BTRFS info (device loop1): last unmount of filesystem 1680000e-3c1e-4c46-84b6-56bd3909af50 VFS: Busy inodes after unmount of loop1 (btrfs) ------------[ cut here ]------------ kernel BUG at fs/super.c:650! Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI CPU: 0 UID: 0 PID: 48168 Comm: syz-executor Not tainted 6.15.0-rc2-00471-g119009db2674 #2 PREEMPT(full) Hardware name: QEMU Ubuntu 24.04 PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 RIP: 0010:generic_shutdown_super+0x2e9/0x390 fs/super.c:650 Call Trace: <TASK> kill_anon_super+0x3a/0x60 fs/super.c:1237 btrfs_kill_super+0x3b/0x50 fs/btrfs/super.c:2099 deactivate_locked_super+0xbe/0x1a0 fs/super.c:473 deactivate_super fs/super.c:506 [inline] deactivate_super+0xe2/0x100 fs/super.c:502 cleanup_mnt+0x21f/0x440 fs/namespace.c:1435 task_work_run+0x14d/0x240 kernel/task_work.c:227 resume_user_mode_work include/linux/resume_user_mode.h:50 [inline] exit_to_user_mode_loop kernel/entry/common.c:114 [inline] exit_to_user_mode_prepare include/linux/entry-common.h:329 [inline] __syscall_exit_to_user_mode_work kernel/entry/common.c:207 [inline] syscall_exit_to_user_mode+0x269/0x290 kernel/entry/common.c:218 do_syscall_64+0xd4/0x250 arch/x86/entry/syscall_64.c:100 entry_SYSCALL_64_after_hwframe+0x77/0x7f </TASK> [CAUSE] When btrfs_alloc_path() failed, btrfs_iget() directly returned without releasing the inode already allocated by btrfs_iget_locked(). This results the above busy inode and trigger the kernel BUG. [FIX] Fix it by calling iget_failed() if btrfs_alloc_path() failed. If we hit error inside btrfs_read_locked_inode(), it will properly call iget_failed(), so nothing to worry about. Although the iget_failed() cleanup inside btrfs_read_locked_inode() is a break of the normal error handling scheme, let's fix the obvious bug and backport first, then rework the error handling later.

In the Linux kernel, the following vulnerability has been resolved: iommu: Fix two issues in iommu_copy_struct_from_user() In the review for iommu_copy_struct_to_user() helper, Matt pointed out that a NULL pointer should be rejected prior to dereferencing it: https://lore.kernel.org/all/86881827-8E2D-461C-BDA3-FA8FD14C343C@nvidia.com And Alok pointed out a typo at the same time: https://lore.kernel.org/all/480536af-6830-43ce-a327-adbd13dc3f1d@oracle.com Since both issues were copied from iommu_copy_struct_from_user(), fix them first in the current header.

In the Linux kernel, the following vulnerability has been resolved: powerpc64/ftrace: fix module loading without patchable function entries get_stubs_size assumes that there must always be at least one patchable function entry, which is not always the case (modules that export data but no code), otherwise it returns -ENOEXEC and thus the section header sh_size is set to that value. During module_memory_alloc() the size is passed to execmem_alloc() after being page-aligned and thus set to zero which will cause it to fail the allocation (and thus module loading) as __vmalloc_node_range() checks for zero-sized allocs and returns null: [ 115.466896] module_64: cast_common: doesn't contain __patchable_function_entries. [ 115.469189] ------------[ cut here ]------------ [ 115.469496] WARNING: CPU: 0 PID: 274 at mm/vmalloc.c:3778 __vmalloc_node_range_noprof+0x8b4/0x8f0 ... [ 115.478574] ---[ end trace 0000000000000000 ]--- [ 115.479545] execmem: unable to allocate memory Fix this by removing the check completely, since it is anyway not helpful to propagate this as an error upwards.

In the Linux kernel, the following vulnerability has been resolved: wifi: plfxlc: Remove erroneous assert in plfxlc_mac_release plfxlc_mac_release() asserts that mac->lock is held. This assertion is incorrect, because even if it was possible, it would not be the valid behaviour. The function is used when probe fails or after the device is disconnected. In both cases mac->lock can not be held as the driver is not working with the device at the moment. All functions that use mac->lock unlock it just after it was held. There is also no need to hold mac->lock for plfxlc_mac_release() itself, as mac data is not affected, except for mac->flags, which is modified atomically. This bug leads to the following warning: ================================================================ WARNING: CPU: 0 PID: 127 at drivers/net/wireless/purelifi/plfxlc/mac.c:106 plfxlc_mac_release+0x7d/0xa0 Modules linked in: CPU: 0 PID: 127 Comm: kworker/0:2 Not tainted 6.1.124-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 Workqueue: usb_hub_wq hub_event RIP: 0010:plfxlc_mac_release+0x7d/0xa0 drivers/net/wireless/purelifi/plfxlc/mac.c:106 Call Trace: <TASK> probe+0x941/0xbd0 drivers/net/wireless/purelifi/plfxlc/usb.c:694 usb_probe_interface+0x5c0/0xaf0 drivers/usb/core/driver.c:396 really_probe+0x2ab/0xcb0 drivers/base/dd.c:639 __driver_probe_device+0x1a2/0x3d0 drivers/base/dd.c:785 driver_probe_device+0x50/0x420 drivers/base/dd.c:815 __device_attach_driver+0x2cf/0x510 drivers/base/dd.c:943 bus_for_each_drv+0x183/0x200 drivers/base/bus.c:429 __device_attach+0x359/0x570 drivers/base/dd.c:1015 bus_probe_device+0xba/0x1e0 drivers/base/bus.c:489 device_add+0xb48/0xfd0 drivers/base/core.c:3696 usb_set_configuration+0x19dd/0x2020 drivers/usb/core/message.c:2165 usb_generic_driver_probe+0x84/0x140 drivers/usb/core/generic.c:238 usb_probe_device+0x130/0x260 drivers/usb/core/driver.c:293 really_probe+0x2ab/0xcb0 drivers/base/dd.c:639 __driver_probe_device+0x1a2/0x3d0 drivers/base/dd.c:785 driver_probe_device+0x50/0x420 drivers/base/dd.c:815 __device_attach_driver+0x2cf/0x510 drivers/base/dd.c:943 bus_for_each_drv+0x183/0x200 drivers/base/bus.c:429 __device_attach+0x359/0x570 drivers/base/dd.c:1015 bus_probe_device+0xba/0x1e0 drivers/base/bus.c:489 device_add+0xb48/0xfd0 drivers/base/core.c:3696 usb_new_device+0xbdd/0x18f0 drivers/usb/core/hub.c:2620 hub_port_connect drivers/usb/core/hub.c:5477 [inline] hub_port_connect_change drivers/usb/core/hub.c:5617 [inline] port_event drivers/usb/core/hub.c:5773 [inline] hub_event+0x2efe/0x5730 drivers/usb/core/hub.c:5855 process_one_work+0x8a9/0x11d0 kernel/workqueue.c:2292 worker_thread+0xa47/0x1200 kernel/workqueue.c:2439 kthread+0x28d/0x320 kernel/kthread.c:376 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295 </TASK> ================================================================ Found by Linux Verification Center (linuxtesting.org) with Syzkaller.

In the Linux kernel, the following vulnerability has been resolved: spi: spi-mem: Add fix to avoid divide error For some SPI flash memory operations, dummy bytes are not mandatory. For example, in Winbond SPINAND flash memory devices, the `write_cache` and `update_cache` operation variants have zero dummy bytes. Calculating the duration for SPI memory operations with zero dummy bytes causes a divide error when `ncycles` is calculated in the spi_mem_calc_op_duration(). Add changes to skip the 'ncylcles' calculation for zero dummy bytes. Following divide error is fixed by this change: Oops: divide error: 0000 [#1] PREEMPT SMP NOPTI ... ? do_trap+0xdb/0x100 ? do_error_trap+0x75/0xb0 ? spi_mem_calc_op_duration+0x56/0xb0 ? exc_divide_error+0x3b/0x70 ? spi_mem_calc_op_duration+0x56/0xb0 ? asm_exc_divide_error+0x1b/0x20 ? spi_mem_calc_op_duration+0x56/0xb0 ? spinand_select_op_variant+0xee/0x190 [spinand] spinand_match_and_init+0x13e/0x1a0 [spinand] spinand_manufacturer_match+0x6e/0xa0 [spinand] spinand_probe+0x357/0x7f0 [spinand] ? kernfs_activate+0x87/0xd0 spi_mem_probe+0x7a/0xb0 spi_probe+0x7d/0x130

In the Linux kernel, the following vulnerability has been resolved: bnxt_en: Fix error handling path in bnxt_init_chip() WARN_ON() is triggered in __flush_work() if bnxt_init_chip() fails because we call cancel_work_sync() on dim work that has not been initialized. WARNING: CPU: 37 PID: 5223 at kernel/workqueue.c:4201 __flush_work.isra.0+0x212/0x230 The driver relies on the BNXT_STATE_NAPI_DISABLED bit to check if dim work has already been cancelled. But in the bnxt_open() path, BNXT_STATE_NAPI_DISABLED is not set and this causes the error path to think that it needs to cancel the uninitalized dim work. Fix it by setting BNXT_STATE_NAPI_DISABLED during initialization. The bit will be cleared when we enable NAPI and initialize dim work.

IBM Security ReaQta EDR 3.12 could allow an attacker to perform unauthorized actions due to improper SSL certificate validation.

VMware ESXi and vCenter Server contain a reflected cross-site scripting vulnerability due to improper input validation. A malicious actor with network access to the login page of certain ESXi host or vCenter Server URL paths may exploit this issue to steal cookies or redirect to malicious websites.

VMware ESXi, Workstation, and Fusion contain a denial-of-service vulnerability due to certain guest options. A malicious actor with non-administrative privileges within a guest operating system may be able to exploit this issue by exhausting memory of the host process leading to a denial-of-service condition.

VMware ESXi contains a denial-of-service vulnerability that occurs when performing a guest operation. A malicious actor with guest operation privileges on a VM, who is already authenticated through vCenter Server or ESXi may trigger this issue to create a denial-of-service condition of guest VMs with VMware Tools running and guest operations enabled.

IBM Security ReaQta EDR 3.12 could allow an attacker to spoof a trusted entity by interfering with the communication path between the host and client.

A vulnerability has been found in Netgear DGND3700 1.1.00.15_1.00.15NA and classified as problematic. This vulnerability affects unknown code of the file /currentsetting.htm of the component mini_http. The manipulation leads to information disclosure. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. Other products might be affected as well. The vendor was contacted early about this disclosure.

TYPO3 is an open source, PHP based web content management system. By design, the file management module in TYPO3’s backend user interface has historically allowed the upload of any file type, with the exception of those that are directly executable in a web server context. This lack of restriction means it is possible to upload files that may be considered potentially harmful, such as executable binaries (e.g., `.exe` files), or files with inconsistent file extensions and MIME types (for example, a file incorrectly named with a `.png` extension but actually carrying the MIME type `application/zip`) starting in version 9.0.0 and prior to versions 9.5.51 ELTS, 10.4.50 ELTS, 11.5.44 ELTS, 12.4.31 LTS, and 13.4.12 LTS. Although such files are not directly executable through the web server, their presence can introduce indirect risks. For example, third-party services such as antivirus scanners or malware detection systems might flag or block access to the website for end users if suspicious files are found. This could negatively affect the availability or reputation of the site. Users should update to TYPO3 version 9.5.51 ELTS, 10.4.50 ELTS, 11.5.44 ELTS, 12.4.31 LTS, or 13.4.12 LTS to fix the problem.