CVE Database

In the Linux kernel, the following vulnerability has been resolved: usb: dwc3: gadget: check that event count does not exceed event buffer length The event count is read from register DWC3_GEVNTCOUNT. There is a check for the count being zero, but not for exceeding the event buffer length. Check that event count does not exceed event buffer length, avoiding an out-of-bounds access when memcpy'ing the event. Crash log: Unable to handle kernel paging request at virtual address ffffffc0129be000 pc : __memcpy+0x114/0x180 lr : dwc3_check_event_buf+0xec/0x348 x3 : 0000000000000030 x2 : 000000000000dfc4 x1 : ffffffc0129be000 x0 : ffffff87aad60080 Call trace: __memcpy+0x114/0x180 dwc3_interrupt+0x24/0x34

In the Linux kernel, the following vulnerability has been resolved: udmabuf: fix a buf size overflow issue during udmabuf creation by casting size_limit_mb to u64 when calculate pglimit.

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix WARNING "do not call blocking ops when !TASK_RUNNING" wait_event_timeout() will set the state of the current task to TASK_UNINTERRUPTIBLE, before doing the condition check. This means that ksmbd_durable_scavenger_alive() will try to acquire the mutex while already in a sleeping state. The scheduler warns us by giving the following warning: do not call blocking ops when !TASK_RUNNING; state=2 set at [<0000000061515a6f>] prepare_to_wait_event+0x9f/0x6c0 WARNING: CPU: 2 PID: 4147 at kernel/sched/core.c:10099 __might_sleep+0x12f/0x160 mutex lock is not needed in ksmbd_durable_scavenger_alive().

In the Linux kernel, the following vulnerability has been resolved: spi: spi-imx: Add check for spi_imx_setupxfer() Add check for the return value of spi_imx_setupxfer(). spi_imx->rx and spi_imx->tx function pointer can be NULL when spi_imx_setupxfer() return error, and make NULL pointer dereference. Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 Call trace: 0x0 spi_imx_pio_transfer+0x50/0xd8 spi_imx_transfer_one+0x18c/0x858 spi_transfer_one_message+0x43c/0x790 __spi_pump_transfer_message+0x238/0x5d4 __spi_sync+0x2b0/0x454 spi_write_then_read+0x11c/0x200

In the Linux kernel, the following vulnerability has been resolved: driver core: fix potential NULL pointer dereference in dev_uevent() If userspace reads "uevent" device attribute at the same time as another threads unbinds the device from its driver, change to dev->driver from a valid pointer to NULL may result in crash. Fix this by using READ_ONCE() when fetching the pointer, and take bus' drivers klist lock to make sure driver instance will not disappear while we access it. Use WRITE_ONCE() when setting the driver pointer to ensure there is no tearing.

The Event Manager, Events Calendar, Tickets, Registrations – Eventin plugin for WordPress is vulnerable to arbitrary file read in all versions up to, and including, 4.0.26 via the proxy_image() function. This makes it possible for unauthenticated attackers to read the contents of arbitrary files on the server, which can contain sensitive information. CVE-2025-47445 is a duplicate of this vulnerability.

The Wolmart | Multi-Vendor Marketplace WooCommerce Theme theme for WordPress is vulnerable to arbitrary shortcode execution in all versions up to, and including, 1.8.11. This is due to the software allowing users to execute an action that does not properly validate a value before running do_shortcode. This makes it possible for unauthenticated attackers to execute arbitrary shortcodes.

Rack is a modular Ruby web server interface. Prior to versions 2.2.14, 3.0.16, and 3.1.14, `Rack::QueryParser` parses query strings and `application/x-www-form-urlencoded` bodies into Ruby data structures without imposing any limit on the number of parameters, allowing attackers to send requests with extremely large numbers of parameters. The vulnerability arises because `Rack::QueryParser` iterates over each `&`-separated key-value pair and adds it to a Hash without enforcing an upper bound on the total number of parameters. This allows an attacker to send a single request containing hundreds of thousands (or more) of parameters, which consumes excessive memory and CPU during parsing. An attacker can trigger denial of service by sending specifically crafted HTTP requests, which can cause memory exhaustion or pin CPU resources, stalling or crashing the Rack server. This results in full service disruption until the affected worker is restarted. Versions 2.2.14, 3.0.16, and 3.1.14 fix the issue. Some other mitigations are available. One may use middleware to enforce a maximum query string size or parameter count, or employ a reverse proxy (such as Nginx) to limit request sizes and reject oversized query strings or bodies. Limiting request body sizes and query string lengths at the web server or CDN level is an effective mitigation.

On F5OS, an improper authorization vulnerability exists where remotely authenticated users (LDAP, RADIUS, TACACS+) may be authorized with higher privilege F5OS roles. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.

When a Session Initiation Protocol (SIP) message routing framework (MRF) application layer gateway (ALG) profile is configured on a Message Routing virtual server, undisclosed requests can cause the Traffic Management Microkernel (TMM) to terminate. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.

When connection mirroring is configured on a virtual server, undisclosed requests can cause the Traffic Management Microkernel (TMM) to terminate in the standby BIG-IP systems in a traffic group. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.

When HTTP/2 client and server profile is configured on a virtual server, undisclosed requests can cause TMM to terminate.  Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated

When a Stream Control Transmission Protocol (SCTP) profile is configured on a virtual server, undisclosed requests can cause an increase in memory resource utilization. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.

When an HTTP profile with the Enforce RFC Compliance option is configured on a virtual server, undisclosed requests can cause the Traffic Management Microkernel (TMM) to terminate. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.

On an F5OS system, if the root user had previously configured the system to allow login via SSH key-based authentication, and then enabled Appliance Mode; access via SSH key-based authentication is still allowed. For an attacker to exploit this vulnerability they must obtain the root user's SSH private key.   Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.

When a BIG-IP APM virtual server is configured to use a PingAccess profile, undisclosed requests can cause TMM to terminate. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.

When a BIG-IP HTTP/2 httprouter profile is configured on a virtual server, undisclosed responses can cause an increase in memory resource utilization.  Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.

When a BIG-IP PEM system is licensed with URL categorization, and the URL categorization policy or an iRule with the urlcat command is enabled on a virtual server, undisclosed requests can cause the Traffic Management Microkernel (TMM) to terminate. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.

When running in Appliance mode, a command injection vulnerability exists in an undisclosed iControl REST and BIG-IP TMOS Shell (tmsh) command which may allow an authenticated attacker with administrator role privileges to execute arbitrary system commands. A successful exploit can allow the attacker to cross a security boundary.  Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.

BrightSign players running BrightSign OS series 4 prior to v8.5.53.1 or series 5 prior to v9.0.166 contain an execution with unnecessary privileges vulnerability, allowing for privilege escalation on the device once code execution has been obtained.

IXON VPN Client before 1.4.4 on Windows allows Local Privilege Escalation to SYSTEM because there is code execution from a configuration file that can be controlled by a low-privileged user. There is a race condition in which a temporary configuration file, in a world-writable directory, can be overwritten.

IXON VPN Client before 1.4.4 on Linux and macOS allows Local Privilege Escalation to root because there is code execution from a configuration file that can be controlled by a low-privileged user. There is a race condition in which a temporary configuration file, in a world-writable directory, can be overwritten.

A vulnerability in SMA100 allows a remote authenticated attacker with SSLVPN admin privileges can with admin privileges can inject shell command arguments to upload a file on the appliance.

A vulnerability in SMA100 allows a remote authenticated attacker with SSLVPN user privileges can inject a path traversal sequence to make any directory on the SMA appliance writable.

A vulnerability in SMA100 allows a remote authenticated attacker with SSLVPN user privileges to bypass the path traversal checks and delete an arbitrary file potentially resulting in a reboot to factory default settings.

A vulnerability in the management API of Cisco Catalyst Center, formerly Cisco DNA Center, could allow an unauthenticated, remote attacker to read and modify the outgoing proxy configuration settings. This vulnerability is due to the lack of authentication in an API endpoint. An attacker could exploit this vulnerability by sending a request to the affected API of a Catalyst Center device. A successful exploit could allow the attacker to view or modify the outgoing proxy configuration, which could disrupt internet traffic from Cisco Catalyst Center or may allow the attacker to intercept outbound internet traffic.

A vulnerability in Cisco IOS XE Wireless Controller Software could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to insufficient input validation of access point (AP) Cisco Discovery Protocol (CDP) neighbor reports when they are processed by the wireless controller. An attacker could exploit this vulnerability by sending a crafted CDP packet to an AP. A successful exploit could allow the attacker to cause an unexpected reload of the wireless controller that is managing the AP, resulting in a DoS condition that affects the wireless network.

A vulnerability in the Internet Key Exchange version 1 (IKEv1) implementation of Cisco IOS XE Software could allow an authenticated, remote attacker to cause a denial of service (DoS) condition. The attacker must have valid IKEv1 VPN credentials to exploit this vulnerability. This vulnerability is due to improper validation of IKEv1 phase 2 parameters before the IPsec security association creation request is handed off to the hardware cryptographic accelerator of an affected device. An attacker could exploit this vulnerability by sending crafted IKEv1 messages to the affected device. A successful exploit could allow the attacker to cause the device to reload.

A vulnerability in the Switch Integrated Security Features (SISF) of Cisco IOS Software, Cisco IOS XE Software, Cisco NX-OS Software, and Cisco Wireless LAN Controller (WLC) AireOS Software could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to the incorrect handling of DHCPv6 packets. An attacker could exploit this vulnerability by sending a crafted DHCPv6 packet to an affected device. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition.

A vulnerability in the Cisco Express Forwarding functionality of Cisco IOS XE Software for Cisco ASR 903 Aggregation Services Routers with Route Switch Processor 3 (RSP3C) could allow an unauthenticated, adjacent attacker to trigger a denial of service (DoS) condition. This vulnerability is due to improper memory management when Cisco IOS XE Software is processing Address Resolution Protocol (ARP) messages. An attacker could exploit this vulnerability by sending crafted ARP messages at a high rate over a period of time to an affected device. A successful exploit could allow the attacker to exhaust system resources, which eventually triggers a reload of the active route switch processor (RSP). If a redundant RSP is not present, the router reloads.