CVE Database

In the Linux kernel, the following vulnerability has been resolved: KVM: SVM: Forcibly leave SMM mode on SHUTDOWN interception Previously, commit ed129ec9057f ("KVM: x86: forcibly leave nested mode on vCPU reset") addressed an issue where a triple fault occurring in nested mode could lead to use-after-free scenarios. However, the commit did not handle the analogous situation for System Management Mode (SMM). This omission results in triggering a WARN when KVM forces a vCPU INIT after SHUTDOWN interception while the vCPU is in SMM. This situation was reprodused using Syzkaller by: 1) Creating a KVM VM and vCPU 2) Sending a KVM_SMI ioctl to explicitly enter SMM 3) Executing invalid instructions causing consecutive exceptions and eventually a triple fault The issue manifests as follows: WARNING: CPU: 0 PID: 25506 at arch/x86/kvm/x86.c:12112 kvm_vcpu_reset+0x1d2/0x1530 arch/x86/kvm/x86.c:12112 Modules linked in: CPU: 0 PID: 25506 Comm: syz-executor.0 Not tainted 6.1.130-syzkaller-00157-g164fe5dde9b6 #0 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014 RIP: 0010:kvm_vcpu_reset+0x1d2/0x1530 arch/x86/kvm/x86.c:12112 Call Trace: <TASK> shutdown_interception+0x66/0xb0 arch/x86/kvm/svm/svm.c:2136 svm_invoke_exit_handler+0x110/0x530 arch/x86/kvm/svm/svm.c:3395 svm_handle_exit+0x424/0x920 arch/x86/kvm/svm/svm.c:3457 vcpu_enter_guest arch/x86/kvm/x86.c:10959 [inline] vcpu_run+0x2c43/0x5a90 arch/x86/kvm/x86.c:11062 kvm_arch_vcpu_ioctl_run+0x50f/0x1cf0 arch/x86/kvm/x86.c:11283 kvm_vcpu_ioctl+0x570/0xf00 arch/x86/kvm/../../../virt/kvm/kvm_main.c:4122 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:870 [inline] __se_sys_ioctl fs/ioctl.c:856 [inline] __x64_sys_ioctl+0x19a/0x210 fs/ioctl.c:856 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x35/0x80 arch/x86/entry/common.c:81 entry_SYSCALL_64_after_hwframe+0x6e/0xd8 Architecturally, INIT is blocked when the CPU is in SMM, hence KVM's WARN() in kvm_vcpu_reset() to guard against KVM bugs, e.g. to detect improper emulation of INIT. SHUTDOWN on SVM is a weird edge case where KVM needs to do _something_ sane with the VMCB, since it's technically undefined, and INIT is the least awful choice given KVM's ABI. So, double down on stuffing INIT on SHUTDOWN, and force the vCPU out of SMM to avoid any weirdness (and the WARN). Found by Linux Verification Center (linuxtesting.org) with Syzkaller. [sean: massage changelog, make it clear this isn't architectural behavior]

In the Linux kernel, the following vulnerability has been resolved: ksmbd: prevent rename with empty string Client can send empty newname string to ksmbd server. It will cause a kernel oops from d_alloc. This patch return the error when attempting to rename a file or directory with an empty new name string.

In the Linux kernel, the following vulnerability has been resolved: smb: client: Avoid race in open_cached_dir with lease breaks A pre-existing valid cfid returned from find_or_create_cached_dir might race with a lease break, meaning open_cached_dir doesn't consider it valid, and thinks it's newly-constructed. This leaks a dentry reference if the allocation occurs before the queued lease break work runs. Avoid the race by extending holding the cfid_list_lock across find_or_create_cached_dir and when the result is checked.

In the Linux kernel, the following vulnerability has been resolved: ksmbd: Fix UAF in __close_file_table_ids A use-after-free is possible if one thread destroys the file via __ksmbd_close_fd while another thread holds a reference to it. The existing checks on fp->refcount are not sufficient to prevent this. The fix takes ft->lock around the section which removes the file from the file table. This prevents two threads acquiring the same file pointer via __close_file_table_ids, as well as the other functions which retrieve a file from the IDR and which already use this same lock.

In the Linux kernel, the following vulnerability has been resolved: xenbus: Use kref to track req lifetime Marek reported seeing a NULL pointer fault in the xenbus_thread callstack: BUG: kernel NULL pointer dereference, address: 0000000000000000 RIP: e030:__wake_up_common+0x4c/0x180 Call Trace: <TASK> __wake_up_common_lock+0x82/0xd0 process_msg+0x18e/0x2f0 xenbus_thread+0x165/0x1c0 process_msg+0x18e is req->cb(req). req->cb is set to xs_wake_up(), a thin wrapper around wake_up(), or xenbus_dev_queue_reply(). It seems like it was xs_wake_up() in this case. It seems like req may have woken up the xs_wait_for_reply(), which kfree()ed the req. When xenbus_thread resumes, it faults on the zero-ed data. Linux Device Drivers 2nd edition states: "Normally, a wake_up call can cause an immediate reschedule to happen, meaning that other processes might run before wake_up returns." ... which would match the behaviour observed. Change to keeping two krefs on each request. One for the caller, and one for xenbus_thread. Each will kref_put() when finished, and the last will free it. This use of kref matches the description in Documentation/core-api/kref.rst

In the Linux kernel, the following vulnerability has been resolved: ksmbd: prevent out-of-bounds stream writes by validating *pos ksmbd_vfs_stream_write() did not validate whether the write offset (*pos) was within the bounds of the existing stream data length (v_len). If *pos was greater than or equal to v_len, this could lead to an out-of-bounds memory write. This patch adds a check to ensure *pos is less than v_len before proceeding. If the condition fails, -EINVAL is returned.

In the Linux kernel, the following vulnerability has been resolved: s390/pci: Fix duplicate pci_dev_put() in disable_slot() when PF has child VFs With commit bcb5d6c76903 ("s390/pci: introduce lock to synchronize state of zpci_dev's") the code to ignore power off of a PF that has child VFs was changed from a direct return to a goto to the unlock and pci_dev_put() section. The change however left the existing pci_dev_put() untouched resulting in a doubple put. This can subsequently cause a use after free if the struct pci_dev is released in an unexpected state. Fix this by removing the extra pci_dev_put().

In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: Fix invalid entry fetch in ath12k_dp_mon_srng_process Currently, ath12k_dp_mon_srng_process uses ath12k_hal_srng_src_get_next_entry to fetch the next entry from the destination ring. This is incorrect because ath12k_hal_srng_src_get_next_entry is intended for source rings, not destination rings. This leads to invalid entry fetches, causing potential data corruption or crashes due to accessing incorrect memory locations. This happens because the source ring and destination ring have different handling mechanisms and using the wrong function results in incorrect pointer arithmetic and ring management. To fix this issue, replace the call to ath12k_hal_srng_src_get_next_entry with ath12k_hal_srng_dst_get_next_entry in ath12k_dp_mon_srng_process. This ensures that the correct function is used for fetching entries from the destination ring, preventing invalid memory accesses. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3

In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: Fix invalid data access in ath12k_dp_rx_h_undecap_nwifi In certain cases, hardware might provide packets with a length greater than the maximum native Wi-Fi header length. This can lead to accessing and modifying fields in the header within the ath12k_dp_rx_h_undecap_nwifi function for DP_RX_DECAP_TYPE_NATIVE_WIFI decap type and potentially resulting in invalid data access and memory corruption. Add a sanity check before processing the SKB to prevent invalid data access in the undecap native Wi-Fi function for the DP_RX_DECAP_TYPE_NATIVE_WIFI decap type. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1

In the Linux kernel, the following vulnerability has been resolved: tracing: Verify event formats that have "%*p.." The trace event verifier checks the formats of trace events to make sure that they do not point at memory that is not in the trace event itself or in data that will never be freed. If an event references data that was allocated when the event triggered and that same data is freed before the event is read, then the kernel can crash by reading freed memory. The verifier runs at boot up (or module load) and scans the print formats of the events and checks their arguments to make sure that dereferenced pointers are safe. If the format uses "%*p.." the verifier will ignore it, and that could be dangerous. Cover this case as well. Also add to the sample code a use case of "%*pbl".

In the Linux kernel, the following vulnerability has been resolved: perf/x86/intel: KVM: Mask PEBS_ENABLE loaded for guest with vCPU's value. When generating the MSR_IA32_PEBS_ENABLE value that will be loaded on VM-Entry to a KVM guest, mask the value with the vCPU's desired PEBS_ENABLE value. Consulting only the host kernel's host vs. guest masks results in running the guest with PEBS enabled even when the guest doesn't want to use PEBS. Because KVM uses perf events to proxy the guest virtual PMU, simply looking at exclude_host can't differentiate between events created by host userspace, and events created by KVM on behalf of the guest. Running the guest with PEBS unexpectedly enabled typically manifests as crashes due to a near-infinite stream of #PFs. E.g. if the guest hasn't written MSR_IA32_DS_AREA, the CPU will hit page faults on address '0' when trying to record PEBS events. The issue is most easily reproduced by running `perf kvm top` from before commit 7b100989b4f6 ("perf evlist: Remove __evlist__add_default") (after which, `perf kvm top` effectively stopped using PEBS). The userspace side of perf creates a guest-only PEBS event, which intel_guest_get_msrs() misconstrues a guest-*owned* PEBS event. Arguably, this is a userspace bug, as enabling PEBS on guest-only events simply cannot work, and userspace can kill VMs in many other ways (there is no danger to the host). However, even if this is considered to be bad userspace behavior, there's zero downside to perf/KVM restricting PEBS to guest-owned events. Note, commit 854250329c02 ("KVM: x86/pmu: Disable guest PEBS temporarily in two rare situations") fixed the case where host userspace is profiling KVM *and* userspace, but missed the case where userspace is profiling only KVM.

In the Linux kernel, the following vulnerability has been resolved: ASoC: simple-card-utils: Fix pointer check in graph_util_parse_link_direction Actually check if the passed pointers are valid, before writing to them. This also fixes a USBAN warning: UBSAN: invalid-load in ../sound/soc/fsl/imx-card.c:687:25 load of value 255 is not a valid value for type '_Bool' This is because playback_only is uninitialized and is not written to, as the playback-only property is absent.

In the Linux kernel, the following vulnerability has been resolved: btrfs: adjust subpage bit start based on sectorsize When running machines with 64k page size and a 16k nodesize we started seeing tree log corruption in production. This turned out to be because we were not writing out dirty blocks sometimes, so this in fact affects all metadata writes. When writing out a subpage EB we scan the subpage bitmap for a dirty range. If the range isn't dirty we do bit_start++; to move onto the next bit. The problem is the bitmap is based on the number of sectors that an EB has. So in this case, we have a 64k pagesize, 16k nodesize, but a 4k sectorsize. This means our bitmap is 4 bits for every node. With a 64k page size we end up with 4 nodes per page. To make this easier this is how everything looks [0 16k 32k 48k ] logical address [0 4 8 12 ] radix tree offset [ 64k page ] folio [ 16k eb ][ 16k eb ][ 16k eb ][ 16k eb ] extent buffers [ | | | | | | | | | | | | | | | | ] bitmap Now we use all of our addressing based on fs_info->sectorsize_bits, so as you can see the above our 16k eb->start turns into radix entry 4. When we find a dirty range for our eb, we correctly do bit_start += sectors_per_node, because if we start at bit 0, the next bit for the next eb is 4, to correspond to eb->start 16k. However if our range is clean, we will do bit_start++, which will now put us offset from our radix tree entries. In our case, assume that the first time we check the bitmap the block is not dirty, we increment bit_start so now it == 1, and then we loop around and check again. This time it is dirty, and we go to find that start using the following equation start = folio_start + bit_start * fs_info->sectorsize; so in the case above, eb->start 0 is now dirty, and we calculate start as 0 + 1 * fs_info->sectorsize = 4096 4096 >> 12 = 1 Now we're looking up the radix tree for 1, and we won't find an eb. What's worse is now we're using bit_start == 1, so we do bit_start += sectors_per_node, which is now 5. If that eb is dirty we will run into the same thing, we will look at an offset that is not populated in the radix tree, and now we're skipping the writeout of dirty extent buffers. The best fix for this is to not use sectorsize_bits to address nodes, but that's a larger change. Since this is a fs corruption problem fix it simply by always using sectors_per_node to increment the start bit.

In the Linux kernel, the following vulnerability has been resolved: dm-bufio: don't schedule in atomic context A BUG was reported as below when CONFIG_DEBUG_ATOMIC_SLEEP and try_verify_in_tasklet are enabled. [ 129.444685][ T934] BUG: sleeping function called from invalid context at drivers/md/dm-bufio.c:2421 [ 129.444723][ T934] in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 934, name: kworker/1:4 [ 129.444740][ T934] preempt_count: 201, expected: 0 [ 129.444756][ T934] RCU nest depth: 0, expected: 0 [ 129.444781][ T934] Preemption disabled at: [ 129.444789][ T934] [<ffffffd816231900>] shrink_work+0x21c/0x248 [ 129.445167][ T934] kernel BUG at kernel/sched/walt/walt_debug.c:16! [ 129.445183][ T934] Internal error: Oops - BUG: 00000000f2000800 [#1] PREEMPT SMP [ 129.445204][ T934] Skip md ftrace buffer dump for: 0x1609e0 [ 129.447348][ T934] CPU: 1 PID: 934 Comm: kworker/1:4 Tainted: G W OE 6.6.56-android15-8-o-g6f82312b30b9-debug #1 1400000003000000474e5500b3187743670464e8 [ 129.447362][ T934] Hardware name: Qualcomm Technologies, Inc. Parrot QRD, Alpha-M (DT) [ 129.447373][ T934] Workqueue: dm_bufio_cache shrink_work [ 129.447394][ T934] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 129.447406][ T934] pc : android_rvh_schedule_bug+0x0/0x8 [sched_walt_debug] [ 129.447435][ T934] lr : __traceiter_android_rvh_schedule_bug+0x44/0x6c [ 129.447451][ T934] sp : ffffffc0843dbc90 [ 129.447459][ T934] x29: ffffffc0843dbc90 x28: ffffffffffffffff x27: 0000000000000c8b [ 129.447479][ T934] x26: 0000000000000040 x25: ffffff804b3d6260 x24: ffffffd816232b68 [ 129.447497][ T934] x23: ffffff805171c5b4 x22: 0000000000000000 x21: ffffffd816231900 [ 129.447517][ T934] x20: ffffff80306ba898 x19: 0000000000000000 x18: ffffffc084159030 [ 129.447535][ T934] x17: 00000000d2b5dd1f x16: 00000000d2b5dd1f x15: ffffffd816720358 [ 129.447554][ T934] x14: 0000000000000004 x13: ffffff89ef978000 x12: 0000000000000003 [ 129.447572][ T934] x11: ffffffd817a823c4 x10: 0000000000000202 x9 : 7e779c5735de9400 [ 129.447591][ T934] x8 : ffffffd81560d004 x7 : 205b5d3938373434 x6 : ffffffd8167397c8 [ 129.447610][ T934] x5 : 0000000000000000 x4 : 0000000000000001 x3 : ffffffc0843db9e0 [ 129.447629][ T934] x2 : 0000000000002f15 x1 : 0000000000000000 x0 : 0000000000000000 [ 129.447647][ T934] Call trace: [ 129.447655][ T934] android_rvh_schedule_bug+0x0/0x8 [sched_walt_debug 1400000003000000474e550080cce8a8a78606b6] [ 129.447681][ T934] __might_resched+0x190/0x1a8 [ 129.447694][ T934] shrink_work+0x180/0x248 [ 129.447706][ T934] process_one_work+0x260/0x624 [ 129.447718][ T934] worker_thread+0x28c/0x454 [ 129.447729][ T934] kthread+0x118/0x158 [ 129.447742][ T934] ret_from_fork+0x10/0x20 [ 129.447761][ T934] Code: ???????? ???????? ???????? d2b5dd1f (d4210000) [ 129.447772][ T934] ---[ end trace 0000000000000000 ]--- dm_bufio_lock will call spin_lock_bh when try_verify_in_tasklet is enabled, and __scan will be called in atomic context.

In the Linux kernel, the following vulnerability has been resolved: iommu/amd: Fix potential buffer overflow in parse_ivrs_acpihid There is a string parsing logic error which can lead to an overflow of hid or uid buffers. Comparing ACPIID_LEN against a total string length doesn't take into account the lengths of individual hid and uid buffers so the check is insufficient in some cases. For example if the length of hid string is 4 and the length of the uid string is 260, the length of str will be equal to ACPIID_LEN + 1 but uid string will overflow uid buffer which size is 256. The same applies to the hid string with length 13 and uid string with length 250. Check the length of hid and uid strings separately to prevent buffer overflow. Found by Linux Verification Center (linuxtesting.org) with SVACE.

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix use-after-free in ksmbd_session_rpc_open A UAF issue can occur due to a race condition between ksmbd_session_rpc_open() and __session_rpc_close(). Add rpc_lock to the session to protect it.

In the Linux kernel, the following vulnerability has been resolved: tracing: Fix oob write in trace_seq_to_buffer() syzbot reported this bug: ================================================================== BUG: KASAN: slab-out-of-bounds in trace_seq_to_buffer kernel/trace/trace.c:1830 [inline] BUG: KASAN: slab-out-of-bounds in tracing_splice_read_pipe+0x6be/0xdd0 kernel/trace/trace.c:6822 Write of size 4507 at addr ffff888032b6b000 by task syz.2.320/7260 CPU: 1 UID: 0 PID: 7260 Comm: syz.2.320 Not tainted 6.15.0-rc1-syzkaller-00301-g3bde70a2c827 #0 PREEMPT(full) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/12/2025 Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:408 [inline] print_report+0xc3/0x670 mm/kasan/report.c:521 kasan_report+0xe0/0x110 mm/kasan/report.c:634 check_region_inline mm/kasan/generic.c:183 [inline] kasan_check_range+0xef/0x1a0 mm/kasan/generic.c:189 __asan_memcpy+0x3c/0x60 mm/kasan/shadow.c:106 trace_seq_to_buffer kernel/trace/trace.c:1830 [inline] tracing_splice_read_pipe+0x6be/0xdd0 kernel/trace/trace.c:6822 .... ================================================================== It has been reported that trace_seq_to_buffer() tries to copy more data than PAGE_SIZE to buf. Therefore, to prevent this, we should use the smaller of trace_seq_used(&iter->seq) and PAGE_SIZE as an argument.

In the Linux kernel, the following vulnerability has been resolved: vxlan: vnifilter: Fix unlocked deletion of default FDB entry When a VNI is deleted from a VXLAN device in 'vnifilter' mode, the FDB entry associated with the default remote (assuming one was configured) is deleted without holding the hash lock. This is wrong and will result in a warning [1] being generated by the lockdep annotation that was added by commit ebe642067455 ("vxlan: Create wrappers for FDB lookup"). Reproducer: # ip link add vx0 up type vxlan dstport 4789 external vnifilter local 192.0.2.1 # bridge vni add vni 10010 remote 198.51.100.1 dev vx0 # bridge vni del vni 10010 dev vx0 Fix by acquiring the hash lock before the deletion and releasing it afterwards. Blame the original commit that introduced the issue rather than the one that exposed it. [1] WARNING: CPU: 3 PID: 392 at drivers/net/vxlan/vxlan_core.c:417 vxlan_find_mac+0x17f/0x1a0 [...] RIP: 0010:vxlan_find_mac+0x17f/0x1a0 [...] Call Trace: <TASK> __vxlan_fdb_delete+0xbe/0x560 vxlan_vni_delete_group+0x2ba/0x940 vxlan_vni_del.isra.0+0x15f/0x580 vxlan_process_vni_filter+0x38b/0x7b0 vxlan_vnifilter_process+0x3bb/0x510 rtnetlink_rcv_msg+0x2f7/0xb70 netlink_rcv_skb+0x131/0x360 netlink_unicast+0x426/0x710 netlink_sendmsg+0x75a/0xc20 __sock_sendmsg+0xc1/0x150 ____sys_sendmsg+0x5aa/0x7b0 ___sys_sendmsg+0xfc/0x180 __sys_sendmsg+0x121/0x1b0 do_syscall_64+0xbb/0x1d0 entry_SYSCALL_64_after_hwframe+0x4b/0x53

In the Linux kernel, the following vulnerability has been resolved: xsk: Fix race condition in AF_XDP generic RX path Move rx_lock from xsk_socket to xsk_buff_pool. Fix synchronization for shared umem mode in generic RX path where multiple sockets share single xsk_buff_pool. RX queue is exclusive to xsk_socket, while FILL queue can be shared between multiple sockets. This could result in race condition where two CPU cores access RX path of two different sockets sharing the same umem. Protect both queues by acquiring spinlock in shared xsk_buff_pool. Lock contention may be minimized in the future by some per-thread FQ buffering. It's safe and necessary to move spin_lock_bh(rx_lock) after xsk_rcv_check(): * xs->pool and spinlock_init is synchronized by xsk_bind() -> xsk_is_bound() memory barriers. * xsk_rcv_check() may return true at the moment of xsk_release() or xsk_unbind_dev(), however this will not cause any data races or race conditions. xsk_unbind_dev() removes xdp socket from all maps and waits for completion of all outstanding rx operations. Packets in RX path will either complete safely or drop.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btusb: avoid NULL pointer dereference in skb_dequeue() A NULL pointer dereference can occur in skb_dequeue() when processing a QCA firmware crash dump on WCN7851 (0489:e0f3). [ 93.672166] Bluetooth: hci0: ACL memdump size(589824) [ 93.672475] BUG: kernel NULL pointer dereference, address: 0000000000000008 [ 93.672517] Workqueue: hci0 hci_devcd_rx [bluetooth] [ 93.672598] RIP: 0010:skb_dequeue+0x50/0x80 The issue stems from handle_dump_pkt_qca() returning 0 even when a dump packet is successfully processed. This is because it incorrectly forwards the return value of hci_devcd_init() (which returns 0 on success). As a result, the caller (btusb_recv_acl_qca() or btusb_recv_evt_qca()) assumes the packet was not handled and passes it to hci_recv_frame(), leading to premature kfree() of the skb. Later, hci_devcd_rx() attempts to dequeue the same skb from the dump queue, resulting in a NULL pointer dereference. Fix this by: 1. Making handle_dump_pkt_qca() return 0 on success and negative errno on failure, consistent with kernel conventions. 2. Splitting dump packet detection into separate functions for ACL and event packets for better structure and readability. This ensures dump packets are properly identified and consumed, avoiding double handling and preventing NULL pointer access.

In the Linux kernel, the following vulnerability has been resolved: net: ethernet: mtk-star-emac: fix spinlock recursion issues on rx/tx poll Use spin_lock_irqsave and spin_unlock_irqrestore instead of spin_lock and spin_unlock in mtk_star_emac driver to avoid spinlock recursion occurrence that can happen when enabling the DMA interrupts again in rx/tx poll. ``` BUG: spinlock recursion on CPU#0, swapper/0/0 lock: 0xffff00000db9cf20, .magic: dead4ead, .owner: swapper/0/0, .owner_cpu: 0 CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 6.15.0-rc2-next-20250417-00001-gf6a27738686c-dirty #28 PREEMPT Hardware name: MediaTek MT8365 Open Platform EVK (DT) Call trace: show_stack+0x18/0x24 (C) dump_stack_lvl+0x60/0x80 dump_stack+0x18/0x24 spin_dump+0x78/0x88 do_raw_spin_lock+0x11c/0x120 _raw_spin_lock+0x20/0x2c mtk_star_handle_irq+0xc0/0x22c [mtk_star_emac] __handle_irq_event_percpu+0x48/0x140 handle_irq_event+0x4c/0xb0 handle_fasteoi_irq+0xa0/0x1bc handle_irq_desc+0x34/0x58 generic_handle_domain_irq+0x1c/0x28 gic_handle_irq+0x4c/0x120 do_interrupt_handler+0x50/0x84 el1_interrupt+0x34/0x68 el1h_64_irq_handler+0x18/0x24 el1h_64_irq+0x6c/0x70 regmap_mmio_read32le+0xc/0x20 (P) _regmap_bus_reg_read+0x6c/0xac _regmap_read+0x60/0xdc regmap_read+0x4c/0x80 mtk_star_rx_poll+0x2f4/0x39c [mtk_star_emac] __napi_poll+0x38/0x188 net_rx_action+0x164/0x2c0 handle_softirqs+0x100/0x244 __do_softirq+0x14/0x20 ____do_softirq+0x10/0x20 call_on_irq_stack+0x24/0x64 do_softirq_own_stack+0x1c/0x40 __irq_exit_rcu+0xd4/0x10c irq_exit_rcu+0x10/0x1c el1_interrupt+0x38/0x68 el1h_64_irq_handler+0x18/0x24 el1h_64_irq+0x6c/0x70 cpuidle_enter_state+0xac/0x320 (P) cpuidle_enter+0x38/0x50 do_idle+0x1e4/0x260 cpu_startup_entry+0x34/0x3c rest_init+0xdc/0xe0 console_on_rootfs+0x0/0x6c __primary_switched+0x88/0x90 ```

In the Linux kernel, the following vulnerability has been resolved: pds_core: remove write-after-free of client_id A use-after-free error popped up in stress testing: [Mon Apr 21 21:21:33 2025] BUG: KFENCE: use-after-free write in pdsc_auxbus_dev_del+0xef/0x160 [pds_core] [Mon Apr 21 21:21:33 2025] Use-after-free write at 0x000000007013ecd1 (in kfence-#47): [Mon Apr 21 21:21:33 2025] pdsc_auxbus_dev_del+0xef/0x160 [pds_core] [Mon Apr 21 21:21:33 2025] pdsc_remove+0xc0/0x1b0 [pds_core] [Mon Apr 21 21:21:33 2025] pci_device_remove+0x24/0x70 [Mon Apr 21 21:21:33 2025] device_release_driver_internal+0x11f/0x180 [Mon Apr 21 21:21:33 2025] driver_detach+0x45/0x80 [Mon Apr 21 21:21:33 2025] bus_remove_driver+0x83/0xe0 [Mon Apr 21 21:21:33 2025] pci_unregister_driver+0x1a/0x80 The actual device uninit usually happens on a separate thread scheduled after this code runs, but there is no guarantee of order of thread execution, so this could be a problem. There's no actual need to clear the client_id at this point, so simply remove the offending code.

In the Linux kernel, the following vulnerability has been resolved: net_sched: drr: Fix double list add in class with netem as child qdisc As described in Gerrard's report [1], there are use cases where a netem child qdisc will make the parent qdisc's enqueue callback reentrant. In the case of drr, there won't be a UAF, but the code will add the same classifier to the list twice, which will cause memory corruption. In addition to checking for qlen being zero, this patch checks whether the class was already added to the active_list (cl_is_active) before adding to the list to cover for the reentrant case. [1] https://lore.kernel.org/netdev/CAHcdcOm+03OD2j6R0=YHKqmy=VgJ8xEOKuP6c7mSgnp-TEJJbw@mail.gmail.com/

In the Linux kernel, the following vulnerability has been resolved: net_sched: ets: Fix double list add in class with netem as child qdisc As described in Gerrard's report [1], there are use cases where a netem child qdisc will make the parent qdisc's enqueue callback reentrant. In the case of ets, there won't be a UAF, but the code will add the same classifier to the list twice, which will cause memory corruption. In addition to checking for qlen being zero, this patch checks whether the class was already added to the active_list (cl_is_active) before doing the addition to cater for the reentrant case. [1] https://lore.kernel.org/netdev/CAHcdcOm+03OD2j6R0=YHKqmy=VgJ8xEOKuP6c7mSgnp-TEJJbw@mail.gmail.com/

In the Linux kernel, the following vulnerability has been resolved: net_sched: qfq: Fix double list add in class with netem as child qdisc As described in Gerrard's report [1], there are use cases where a netem child qdisc will make the parent qdisc's enqueue callback reentrant. In the case of qfq, there won't be a UAF, but the code will add the same classifier to the list twice, which will cause memory corruption. This patch checks whether the class was already added to the agg->active list (cl_is_active) before doing the addition to cater for the reentrant case. [1] https://lore.kernel.org/netdev/CAHcdcOm+03OD2j6R0=YHKqmy=VgJ8xEOKuP6c7mSgnp-TEJJbw@mail.gmail.com/

In the Linux kernel, the following vulnerability has been resolved: bnxt_en: Fix out-of-bound memcpy() during ethtool -w When retrieving the FW coredump using ethtool, it can sometimes cause memory corruption: BUG: KFENCE: memory corruption in __bnxt_get_coredump+0x3ef/0x670 [bnxt_en] Corrupted memory at 0x000000008f0f30e8 [ ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ] (in kfence-#45): __bnxt_get_coredump+0x3ef/0x670 [bnxt_en] ethtool_get_dump_data+0xdc/0x1a0 __dev_ethtool+0xa1e/0x1af0 dev_ethtool+0xa8/0x170 dev_ioctl+0x1b5/0x580 sock_do_ioctl+0xab/0xf0 sock_ioctl+0x1ce/0x2e0 __x64_sys_ioctl+0x87/0xc0 do_syscall_64+0x5c/0xf0 entry_SYSCALL_64_after_hwframe+0x78/0x80 ... This happens when copying the coredump segment list in bnxt_hwrm_dbg_dma_data() with the HWRM_DBG_COREDUMP_LIST FW command. The info->dest_buf buffer is allocated based on the number of coredump segments returned by the FW. The segment list is then DMA'ed by the FW and the length of the DMA is returned by FW. The driver then copies this DMA'ed segment list to info->dest_buf. In some cases, this DMA length may exceed the info->dest_buf length and cause the above BUG condition. Fix it by capping the copy length to not exceed the length of info->dest_buf. The extra DMA data contains no useful information. This code path is shared for the HWRM_DBG_COREDUMP_LIST and the HWRM_DBG_COREDUMP_RETRIEVE FW commands. The buffering is different for these 2 FW commands. To simplify the logic, we need to move the line to adjust the buffer length for HWRM_DBG_COREDUMP_RETRIEVE up, so that the new check to cap the copy length will work for both commands.

In the Linux kernel, the following vulnerability has been resolved: mm, slab: clean up slab->obj_exts always When memory allocation profiling is disabled at runtime or due to an error, shutdown_mem_profiling() is called: slab->obj_exts which previously allocated remains. It won't be cleared by unaccount_slab() because of mem_alloc_profiling_enabled() not true. It's incorrect, slab->obj_exts should always be cleaned up in unaccount_slab() to avoid following error: [...]BUG: Bad page state in process... .. [...]page dumped because: page still charged to cgroup [andriy.shevchenko@linux.intel.com: fold need_slab_obj_ext() into its only user]

In the Linux kernel, the following vulnerability has been resolved: ublk: fix race between io_uring_cmd_complete_in_task and ublk_cancel_cmd ublk_cancel_cmd() calls io_uring_cmd_done() to complete uring_cmd, but we may have scheduled task work via io_uring_cmd_complete_in_task() for dispatching request, then kernel crash can be triggered. Fix it by not trying to canceling the command if ublk block request is started.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix slab-use-after-free in hdcp The HDCP code in amdgpu_dm_hdcp.c copies pointers to amdgpu_dm_connector objects without incrementing the kref reference counts. When using a USB-C dock, and the dock is unplugged, the corresponding amdgpu_dm_connector objects are freed, creating dangling pointers in the HDCP code. When the dock is plugged back, the dangling pointers are dereferenced, resulting in a slab-use-after-free: [ 66.775837] BUG: KASAN: slab-use-after-free in event_property_validate+0x42f/0x6c0 [amdgpu] [ 66.776171] Read of size 4 at addr ffff888127804120 by task kworker/0:1/10 [ 66.776179] CPU: 0 UID: 0 PID: 10 Comm: kworker/0:1 Not tainted 6.14.0-rc7-00180-g54505f727a38-dirty #233 [ 66.776183] Hardware name: HP HP Pavilion Aero Laptop 13-be0xxx/8916, BIOS F.17 12/18/2024 [ 66.776186] Workqueue: events event_property_validate [amdgpu] [ 66.776494] Call Trace: [ 66.776496] <TASK> [ 66.776497] dump_stack_lvl+0x70/0xa0 [ 66.776504] print_report+0x175/0x555 [ 66.776507] ? __virt_addr_valid+0x243/0x450 [ 66.776510] ? kasan_complete_mode_report_info+0x66/0x1c0 [ 66.776515] kasan_report+0xeb/0x1c0 [ 66.776518] ? event_property_validate+0x42f/0x6c0 [amdgpu] [ 66.776819] ? event_property_validate+0x42f/0x6c0 [amdgpu] [ 66.777121] __asan_report_load4_noabort+0x14/0x20 [ 66.777124] event_property_validate+0x42f/0x6c0 [amdgpu] [ 66.777342] ? __lock_acquire+0x6b40/0x6b40 [ 66.777347] ? enable_assr+0x250/0x250 [amdgpu] [ 66.777571] process_one_work+0x86b/0x1510 [ 66.777575] ? pwq_dec_nr_in_flight+0xcf0/0xcf0 [ 66.777578] ? assign_work+0x16b/0x280 [ 66.777580] ? lock_is_held_type+0xa3/0x130 [ 66.777583] worker_thread+0x5c0/0xfa0 [ 66.777587] ? process_one_work+0x1510/0x1510 [ 66.777588] kthread+0x3a2/0x840 [ 66.777591] ? kthread_is_per_cpu+0xd0/0xd0 [ 66.777594] ? trace_hardirqs_on+0x4f/0x60 [ 66.777597] ? _raw_spin_unlock_irq+0x27/0x60 [ 66.777599] ? calculate_sigpending+0x77/0xa0 [ 66.777602] ? kthread_is_per_cpu+0xd0/0xd0 [ 66.777605] ret_from_fork+0x40/0x90 [ 66.777607] ? kthread_is_per_cpu+0xd0/0xd0 [ 66.777609] ret_from_fork_asm+0x11/0x20 [ 66.777614] </TASK> [ 66.777643] Allocated by task 10: [ 66.777646] kasan_save_stack+0x39/0x60 [ 66.777649] kasan_save_track+0x14/0x40 [ 66.777652] kasan_save_alloc_info+0x37/0x50 [ 66.777655] __kasan_kmalloc+0xbb/0xc0 [ 66.777658] __kmalloc_cache_noprof+0x1c8/0x4b0 [ 66.777661] dm_dp_add_mst_connector+0xdd/0x5c0 [amdgpu] [ 66.777880] drm_dp_mst_port_add_connector+0x47e/0x770 [drm_display_helper] [ 66.777892] drm_dp_send_link_address+0x1554/0x2bf0 [drm_display_helper] [ 66.777901] drm_dp_check_and_send_link_address+0x187/0x1f0 [drm_display_helper] [ 66.777909] drm_dp_mst_link_probe_work+0x2b8/0x410 [drm_display_helper] [ 66.777917] process_one_work+0x86b/0x1510 [ 66.777919] worker_thread+0x5c0/0xfa0 [ 66.777922] kthread+0x3a2/0x840 [ 66.777925] ret_from_fork+0x40/0x90 [ 66.777927] ret_from_fork_asm+0x11/0x20 [ 66.777932] Freed by task 1713: [ 66.777935] kasan_save_stack+0x39/0x60 [ 66.777938] kasan_save_track+0x14/0x40 [ 66.777940] kasan_save_free_info+0x3b/0x60 [ 66.777944] __kasan_slab_free+0x52/0x70 [ 66.777946] kfree+0x13f/0x4b0 [ 66.777949] dm_dp_mst_connector_destroy+0xfa/0x150 [amdgpu] [ 66.778179] drm_connector_free+0x7d/0xb0 [ 66.778184] drm_mode_object_put.part.0+0xee/0x160 [ 66.778188] drm_mode_object_put+0x37/0x50 [ 66.778191] drm_atomic_state_default_clear+0x220/0xd60 [ 66.778194] __drm_atomic_state_free+0x16e/0x2a0 [ 66.778197] drm_mode_atomic_ioctl+0x15ed/0x2ba0 [ 66.778200] drm_ioctl_kernel+0x17a/0x310 [ 66.778203] drm_ioctl+0x584/0xd10 [ 66.778206] amdgpu_drm_ioctl+0xd2/0x1c0 [amdgpu] [ 66.778375] __x64_sys_ioctl+0x139/0x1a0 [ 66.778378] x64_sys_call+0xee7/0xfb0 [ 66.778381] ---truncated---

In the Linux kernel, the following vulnerability has been resolved: irqchip/qcom-mpm: Prevent crash when trying to handle non-wake GPIOs On Qualcomm chipsets not all GPIOs are wakeup capable. Those GPIOs do not have a corresponding MPM pin and should not be handled inside the MPM driver. The IRQ domain hierarchy is always applied, so it's required to explicitly disconnect the hierarchy for those. The pinctrl-msm driver marks these with GPIO_NO_WAKE_IRQ. qcom-pdc has a check for this, but irq-qcom-mpm is currently missing the check. This is causing crashes when setting up interrupts for non-wake GPIOs: root@rb1:~# gpiomon -c gpiochip1 10 irq: IRQ159: trimming hierarchy from :soc@0:interrupt-controller@f200000-1 Unable to handle kernel paging request at virtual address ffff8000a1dc3820 Hardware name: Qualcomm Technologies, Inc. Robotics RB1 (DT) pc : mpm_set_type+0x80/0xcc lr : mpm_set_type+0x5c/0xcc Call trace: mpm_set_type+0x80/0xcc (P) qcom_mpm_set_type+0x64/0x158 irq_chip_set_type_parent+0x20/0x38 msm_gpio_irq_set_type+0x50/0x530 __irq_set_trigger+0x60/0x184 __setup_irq+0x304/0x6bc request_threaded_irq+0xc8/0x19c edge_detector_setup+0x260/0x364 linereq_create+0x420/0x5a8 gpio_ioctl+0x2d4/0x6c0 Fix this by copying the check for GPIO_NO_WAKE_IRQ from qcom-pdc.c, so that MPM is removed entirely from the hierarchy for non-wake GPIOs.