CVE Database

In the Linux kernel, the following vulnerability has been resolved: net: phy: mscc: Fix memory leak when using one step timestamping Fix memory leak when running one-step timestamping. When running one-step sync timestamping, the HW is configured to insert the TX time into the frame, so there is no reason to keep the skb anymore. As in this case the HW will never generate an interrupt to say that the frame was timestamped, then the frame will never released. Fix this by freeing the frame in case of one-step timestamping.

In the Linux kernel, the following vulnerability has been resolved: calipso: Don't call calipso functions for AF_INET sk. syzkaller reported a null-ptr-deref in txopt_get(). [0] The offset 0x70 was of struct ipv6_txoptions in struct ipv6_pinfo, so struct ipv6_pinfo was NULL there. However, this never happens for IPv6 sockets as inet_sk(sk)->pinet6 is always set in inet6_create(), meaning the socket was not IPv6 one. The root cause is missing validation in netlbl_conn_setattr(). netlbl_conn_setattr() switches branches based on struct sockaddr.sa_family, which is passed from userspace. However, netlbl_conn_setattr() does not check if the address family matches the socket. The syzkaller must have called connect() for an IPv6 address on an IPv4 socket. We have a proper validation in tcp_v[46]_connect(), but security_socket_connect() is called in the earlier stage. Let's copy the validation to netlbl_conn_setattr(). [0]: Oops: general protection fault, probably for non-canonical address 0xdffffc000000000e: 0000 [#1] PREEMPT SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000070-0x0000000000000077] CPU: 2 UID: 0 PID: 12928 Comm: syz.9.1677 Not tainted 6.12.0 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 RIP: 0010:txopt_get include/net/ipv6.h:390 [inline] RIP: 0010: Code: 02 00 00 49 8b ac 24 f8 02 00 00 e8 84 69 2a fd e8 ff 00 16 fd 48 8d 7d 70 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 53 02 00 00 48 8b 6d 70 48 85 ed 0f 84 ab 01 00 RSP: 0018:ffff88811b8afc48 EFLAGS: 00010212 RAX: dffffc0000000000 RBX: 1ffff11023715f8a RCX: ffffffff841ab00c RDX: 000000000000000e RSI: ffffc90007d9e000 RDI: 0000000000000070 RBP: 0000000000000000 R08: ffffed1023715f9d R09: ffffed1023715f9e R10: ffffed1023715f9d R11: 0000000000000003 R12: ffff888123075f00 R13: ffff88810245bd80 R14: ffff888113646780 R15: ffff888100578a80 FS: 00007f9019bd7640(0000) GS:ffff8882d2d00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f901b927bac CR3: 0000000104788003 CR4: 0000000000770ef0 PKRU: 80000000 Call Trace: <TASK> calipso_sock_setattr+0x56/0x80 net/netlabel/netlabel_calipso.c:557 netlbl_conn_setattr+0x10c/0x280 net/netlabel/netlabel_kapi.c:1177 selinux_netlbl_socket_connect_helper+0xd3/0x1b0 security/selinux/netlabel.c:569 selinux_netlbl_socket_connect_locked security/selinux/netlabel.c:597 [inline] selinux_netlbl_socket_connect+0xb6/0x100 security/selinux/netlabel.c:615 selinux_socket_connect+0x5f/0x80 security/selinux/hooks.c:4931 security_socket_connect+0x50/0xa0 security/security.c:4598 __sys_connect_file+0xa4/0x190 net/socket.c:2067 __sys_connect+0x12c/0x170 net/socket.c:2088 __do_sys_connect net/socket.c:2098 [inline] __se_sys_connect net/socket.c:2095 [inline] __x64_sys_connect+0x73/0xb0 net/socket.c:2095 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xaa/0x1b0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f901b61a12d Code: 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f9019bd6fa8 EFLAGS: 00000246 ORIG_RAX: 000000000000002a RAX: ffffffffffffffda RBX: 00007f901b925fa0 RCX: 00007f901b61a12d RDX: 000000000000001c RSI: 0000200000000140 RDI: 0000000000000003 RBP: 00007f901b701505 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 0000000000000000 R14: 00007f901b5b62a0 R15: 00007f9019bb7000 </TASK> Modules linked in:

In the Linux kernel, the following vulnerability has been resolved: soc: aspeed: Add NULL check in aspeed_lpc_enable_snoop() devm_kasprintf() returns NULL when memory allocation fails. Currently, aspeed_lpc_enable_snoop() does not check for this case, which results in a NULL pointer dereference. Add NULL check after devm_kasprintf() to prevent this issue. [arj: Fix Fixes: tag to use subject from 3772e5da4454]

In the Linux kernel, the following vulnerability has been resolved: watchdog: lenovo_se30_wdt: Fix possible devm_ioremap() NULL pointer dereference in lenovo_se30_wdt_probe() devm_ioremap() returns NULL on error. Currently, lenovo_se30_wdt_probe() does not check for this case, which results in a NULL pointer dereference. Add NULL check after devm_ioremap() to prevent this issue.

In the Linux kernel, the following vulnerability has been resolved: backlight: pm8941: Add NULL check in wled_configure() devm_kasprintf() returns NULL when memory allocation fails. Currently, wled_configure() does not check for this case, which results in a NULL pointer dereference. Add NULL check after devm_kasprintf() to prevent this issue.

In the Linux kernel, the following vulnerability has been resolved: hwmon: (asus-ec-sensors) check sensor index in read_string() Prevent a potential invalid memory access when the requested sensor is not found. find_ec_sensor_index() may return a negative value (e.g. -ENOENT), but its result was used without checking, which could lead to undefined behavior when passed to get_sensor_info(). Add a proper check to return -EINVAL if sensor_index is negative. Found by Linux Verification Center (linuxtesting.org) with SVACE. [groeck: Return error code returned from find_ec_sensor_index]

In the Linux kernel, the following vulnerability has been resolved: dm: limit swapping tables for devices with zone write plugs dm_revalidate_zones() only allowed new or previously unzoned devices to call blk_revalidate_disk_zones(). If the device was already zoned, disk->nr_zones would always equal md->nr_zones, so dm_revalidate_zones() returned without doing any work. This would make the zoned settings for the device not match the new table. If the device had zone write plug resources, it could run into errors like bdev_zone_is_seq() reading invalid memory because disk->conv_zones_bitmap was the wrong size. If the device doesn't have any zone write plug resources, calling blk_revalidate_disk_zones() will always correctly update device. If blk_revalidate_disk_zones() fails, it can still overwrite or clear the current disk->nr_zones value. In this case, DM must restore the previous value of disk->nr_zones, so that the zoned settings will continue to match the previous value that it fell back to. If the device already has zone write plug resources, blk_revalidate_disk_zones() will not correctly update them, if it is called for arbitrary zoned device changes. Since there is not much need for this ability, the easiest solution is to disallow any table reloads that change the zoned settings, for devices that already have zone plug resources. Specifically, if a device already has zone plug resources allocated, it can only switch to another zoned table that also emulates zone append. Also, it cannot change the device size or the zone size. A device can switch to an error target.

In the Linux kernel, the following vulnerability has been resolved: dmaengine: ti: Add NULL check in udma_probe() devm_kasprintf() returns NULL when memory allocation fails. Currently, udma_probe() does not check for this case, which results in a NULL pointer dereference. Add NULL check after devm_kasprintf() to prevent this issue.

In the Linux kernel, the following vulnerability has been resolved: usb: renesas_usbhs: Reorder clock handling and power management in probe Reorder the initialization sequence in `usbhs_probe()` to enable runtime PM before accessing registers, preventing potential crashes due to uninitialized clocks. Currently, in the probe path, registers are accessed before enabling the clocks, leading to a synchronous external abort on the RZ/V2H SoC. The problematic call flow is as follows: usbhs_probe() usbhs_sys_clock_ctrl() usbhs_bset() usbhs_write() iowrite16() <-- Register access before enabling clocks Since `iowrite16()` is performed without ensuring the required clocks are enabled, this can lead to access errors. To fix this, enable PM runtime early in the probe function and ensure clocks are acquired before register access, preventing crashes like the following on RZ/V2H: [13.272640] Internal error: synchronous external abort: 0000000096000010 [#1] PREEMPT SMP [13.280814] Modules linked in: cec renesas_usbhs(+) drm_kms_helper fuse drm backlight ipv6 [13.289088] CPU: 1 UID: 0 PID: 195 Comm: (udev-worker) Not tainted 6.14.0-rc7+ #98 [13.296640] Hardware name: Renesas RZ/V2H EVK Board based on r9a09g057h44 (DT) [13.303834] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [13.310770] pc : usbhs_bset+0x14/0x4c [renesas_usbhs] [13.315831] lr : usbhs_probe+0x2e4/0x5ac [renesas_usbhs] [13.321138] sp : ffff8000827e3850 [13.324438] x29: ffff8000827e3860 x28: 0000000000000000 x27: ffff8000827e3ca0 [13.331554] x26: ffff8000827e3ba0 x25: ffff800081729668 x24: 0000000000000025 [13.338670] x23: ffff0000c0f08000 x22: 0000000000000000 x21: ffff0000c0f08010 [13.345783] x20: 0000000000000000 x19: ffff0000c3b52080 x18: 00000000ffffffff [13.352895] x17: 0000000000000000 x16: 0000000000000000 x15: ffff8000827e36ce [13.360009] x14: 00000000000003d7 x13: 00000000000003d7 x12: 0000000000000000 [13.367122] x11: 0000000000000000 x10: 0000000000000aa0 x9 : ffff8000827e3750 [13.374235] x8 : ffff0000c1850b00 x7 : 0000000003826060 x6 : 000000000000001c [13.381347] x5 : 000000030d5fcc00 x4 : ffff8000825c0000 x3 : 0000000000000000 [13.388459] x2 : 0000000000000400 x1 : 0000000000000000 x0 : ffff0000c3b52080 [13.395574] Call trace: [13.398013] usbhs_bset+0x14/0x4c [renesas_usbhs] (P) [13.403076] platform_probe+0x68/0xdc [13.406738] really_probe+0xbc/0x2c0 [13.410306] __driver_probe_device+0x78/0x120 [13.414653] driver_probe_device+0x3c/0x154 [13.418825] __driver_attach+0x90/0x1a0 [13.422647] bus_for_each_dev+0x7c/0xe0 [13.426470] driver_attach+0x24/0x30 [13.430032] bus_add_driver+0xe4/0x208 [13.433766] driver_register+0x68/0x130 [13.437587] __platform_driver_register+0x24/0x30 [13.442273] renesas_usbhs_driver_init+0x20/0x1000 [renesas_usbhs] [13.448450] do_one_initcall+0x60/0x1d4 [13.452276] do_init_module+0x54/0x1f8 [13.456014] load_module+0x1754/0x1c98 [13.459750] init_module_from_file+0x88/0xcc [13.464004] __arm64_sys_finit_module+0x1c4/0x328 [13.468689] invoke_syscall+0x48/0x104 [13.472426] el0_svc_common.constprop.0+0xc0/0xe0 [13.477113] do_el0_svc+0x1c/0x28 [13.480415] el0_svc+0x30/0xcc [13.483460] el0t_64_sync_handler+0x10c/0x138 [13.487800] el0t_64_sync+0x198/0x19c [13.491453] Code: 2a0103e1 12003c42 12003c63 8b010084 (79400084) [13.497522] ---[ end trace 0000000000000000 ]---

In the Linux kernel, the following vulnerability has been resolved: serial: Fix potential null-ptr-deref in mlb_usio_probe() devm_ioremap() can return NULL on error. Currently, mlb_usio_probe() does not check for this case, which could result in a NULL pointer dereference. Add NULL check after devm_ioremap() to prevent this issue.

In the Linux kernel, the following vulnerability has been resolved: usb: acpi: Prevent null pointer dereference in usb_acpi_add_usb4_devlink() As demonstrated by the fix for update_port_device_state, commit 12783c0b9e2c ("usb: core: Prevent null pointer dereference in update_port_device_state"), usb_hub_to_struct_hub() can return NULL in certain scenarios, such as during hub driver unbind or teardown race conditions, even if the underlying usb_device structure exists. Plus, all other places that call usb_hub_to_struct_hub() in the same file do check for NULL return values. If usb_hub_to_struct_hub() returns NULL, the subsequent access to hub->ports[udev->portnum - 1] will cause a null pointer dereference.

In the Linux kernel, the following vulnerability has been resolved: coresight: holding cscfg_csdev_lock while removing cscfg from csdev There'll be possible race scenario for coresight config: CPU0 CPU1 (perf enable) load module cscfg_load_config_sets() activate config. // sysfs (sys_active_cnt == 1) ... cscfg_csdev_enable_active_config() lock(csdev->cscfg_csdev_lock) deactivate config // sysfs (sys_activec_cnt == 0) cscfg_unload_config_sets() <iterating config_csdev_list> cscfg_remove_owned_csdev_configs() // here load config activate by CPU1 unlock(csdev->cscfg_csdev_lock) iterating config_csdev_list could be raced with config_csdev_list's entry delete. To resolve this race , hold csdev->cscfg_csdev_lock() while cscfg_remove_owned_csdev_configs()

In the Linux kernel, the following vulnerability has been resolved: drm/connector: only call HDMI audio helper plugged cb if non-null On driver remove, sound/soc/codecs/hdmi-codec.c calls the plugged_cb with NULL as the callback function and codec_dev, as seen in its hdmi_remove function. The HDMI audio helper then happily tries calling said null function pointer, and produces an Oops as a result. Fix this by only executing the callback if fn is non-null. This means the .plugged_cb and .plugged_cb_dev members still get appropriately cleared.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: MGMT: reject malformed HCI_CMD_SYNC commands In 'mgmt_hci_cmd_sync()', check whether the size of parameters passed in 'struct mgmt_cp_hci_cmd_sync' matches the total size of the data (i.e. 'sizeof(struct mgmt_cp_hci_cmd_sync)' plus trailing bytes). Otherwise, large invalid 'params_len' will cause 'hci_cmd_sync_alloc()' to do 'skb_put_data()' from an area beyond the one actually passed to 'mgmt_hci_cmd_sync()'.

In the Linux kernel, the following vulnerability has been resolved: net: stmmac: make sure that ptp_rate is not 0 before configuring timestamping The stmmac platform drivers that do not open-code the clk_ptp_rate value after having retrieved the default one from the device-tree can end up with 0 in clk_ptp_rate (as clk_get_rate can return 0). It will eventually propagate up to PTP initialization when bringing up the interface, leading to a divide by 0: Division by zero in kernel. CPU: 1 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.12.30-00001-g48313bd5768a #22 Hardware name: STM32 (Device Tree Support) Call trace: unwind_backtrace from show_stack+0x18/0x1c show_stack from dump_stack_lvl+0x6c/0x8c dump_stack_lvl from Ldiv0_64+0x8/0x18 Ldiv0_64 from stmmac_init_tstamp_counter+0x190/0x1a4 stmmac_init_tstamp_counter from stmmac_hw_setup+0xc1c/0x111c stmmac_hw_setup from __stmmac_open+0x18c/0x434 __stmmac_open from stmmac_open+0x3c/0xbc stmmac_open from __dev_open+0xf4/0x1ac __dev_open from __dev_change_flags+0x1cc/0x224 __dev_change_flags from dev_change_flags+0x24/0x60 dev_change_flags from ip_auto_config+0x2e8/0x11a0 ip_auto_config from do_one_initcall+0x84/0x33c do_one_initcall from kernel_init_freeable+0x1b8/0x214 kernel_init_freeable from kernel_init+0x24/0x140 kernel_init from ret_from_fork+0x14/0x28 Exception stack(0xe0815fb0 to 0xe0815ff8) Prevent this division by 0 by adding an explicit check and error log about the actual issue. While at it, remove the same check from stmmac_ptp_register, which then becomes duplicate

In the Linux kernel, the following vulnerability has been resolved: net: stmmac: make sure that ptp_rate is not 0 before configuring EST If the ptp_rate recorded earlier in the driver happens to be 0, this bogus value will propagate up to EST configuration, where it will trigger a division by 0. Prevent this division by 0 by adding the corresponding check and error code.

In the Linux kernel, the following vulnerability has been resolved: gve: add missing NULL check for gve_alloc_pending_packet() in TX DQO gve_alloc_pending_packet() can return NULL, but gve_tx_add_skb_dqo() did not check for this case before dereferencing the returned pointer. Add a missing NULL check to prevent a potential NULL pointer dereference when allocation fails. This improves robustness in low-memory scenarios.

In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mld: avoid panic on init failure In case of an error during init, in_hw_restart will be set, but it will never get cleared. Instead, we will retry to init again, and then we will act like we are in a restart when we are actually not. This causes (among others) to a NULL pointer dereference when canceling rx_omi::finished_work, that was not even initialized, because we thought that we are in hw_restart. Set in_hw_restart to true only if the fw is running, then we know that FW was loaded successfully and we are not going to the retry loop.

In the Linux kernel, the following vulnerability has been resolved: scsi: core: ufs: Fix a hang in the error handler ufshcd_err_handling_prepare() calls ufshcd_rpm_get_sync(). The latter function can only succeed if UFSHCD_EH_IN_PROGRESS is not set because resuming involves submitting a SCSI command and ufshcd_queuecommand() returns SCSI_MLQUEUE_HOST_BUSY if UFSHCD_EH_IN_PROGRESS is set. Fix this hang by setting UFSHCD_EH_IN_PROGRESS after ufshcd_rpm_get_sync() has been called instead of before. Backtrace: __switch_to+0x174/0x338 __schedule+0x600/0x9e4 schedule+0x7c/0xe8 schedule_timeout+0xa4/0x1c8 io_schedule_timeout+0x48/0x70 wait_for_common_io+0xa8/0x160 //waiting on START_STOP wait_for_completion_io_timeout+0x10/0x20 blk_execute_rq+0xe4/0x1e4 scsi_execute_cmd+0x108/0x244 ufshcd_set_dev_pwr_mode+0xe8/0x250 __ufshcd_wl_resume+0x94/0x354 ufshcd_wl_runtime_resume+0x3c/0x174 scsi_runtime_resume+0x64/0xa4 rpm_resume+0x15c/0xa1c __pm_runtime_resume+0x4c/0x90 // Runtime resume ongoing ufshcd_err_handler+0x1a0/0xd08 process_one_work+0x174/0x808 worker_thread+0x15c/0x490 kthread+0xf4/0x1ec ret_from_fork+0x10/0x20 [ bvanassche: rewrote patch description ]

In the Linux kernel, the following vulnerability has been resolved: e1000: Move cancel_work_sync to avoid deadlock Previously, e1000_down called cancel_work_sync for the e1000 reset task (via e1000_down_and_stop), which takes RTNL. As reported by users and syzbot, a deadlock is possible in the following scenario: CPU 0: - RTNL is held - e1000_close - e1000_down - cancel_work_sync (cancel / wait for e1000_reset_task()) CPU 1: - process_one_work - e1000_reset_task - take RTNL To remedy this, avoid calling cancel_work_sync from e1000_down (e1000_reset_task does nothing if the device is down anyway). Instead, call cancel_work_sync for e1000_reset_task when the device is being removed.

In the Linux kernel, the following vulnerability has been resolved: ACPI: CPPC: Fix NULL pointer dereference when nosmp is used With nosmp in cmdline, other CPUs are not brought up, leaving their cpc_desc_ptr NULL. CPU0's iteration via for_each_possible_cpu() dereferences these NULL pointers, causing panic. Panic backtrace: [ 0.401123] Unable to handle kernel NULL pointer dereference at virtual address 00000000000000b8 ... [ 0.403255] [<ffffffff809a5818>] cppc_allow_fast_switch+0x6a/0xd4 ... Kernel panic - not syncing: Attempted to kill init! [ rjw: New subject ]

In the Linux kernel, the following vulnerability has been resolved: net: Fix TOCTOU issue in sk_is_readable() sk->sk_prot->sock_is_readable is a valid function pointer when sk resides in a sockmap. After the last sk_psock_put() (which usually happens when socket is removed from sockmap), sk->sk_prot gets restored and sk->sk_prot->sock_is_readable becomes NULL. This makes sk_is_readable() racy, if the value of sk->sk_prot is reloaded after the initial check. Which in turn may lead to a null pointer dereference. Ensure the function pointer does not turn NULL after the check.

In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: Kill timer properly at removal The USB-audio MIDI code initializes the timer, but in a rare case, the driver might be freed without the disconnect call. This leaves the timer in an active state while the assigned object is released via snd_usbmidi_free(), which ends up with a kernel warning when the debug configuration is enabled, as spotted by fuzzer. For avoiding the problem, put timer_shutdown_sync() at snd_usbmidi_free(), so that the timer can be killed properly. While we're at it, replace the existing timer_delete_sync() at the disconnect callback with timer_shutdown_sync(), too.

In the Linux kernel, the following vulnerability has been resolved: x86/iopl: Cure TIF_IO_BITMAP inconsistencies io_bitmap_exit() is invoked from exit_thread() when a task exists or when a fork fails. In the latter case the exit_thread() cleans up resources which were allocated during fork(). io_bitmap_exit() invokes task_update_io_bitmap(), which in turn ends up in tss_update_io_bitmap(). tss_update_io_bitmap() operates on the current task. If current has TIF_IO_BITMAP set, but no bitmap installed, tss_update_io_bitmap() crashes with a NULL pointer dereference. There are two issues, which lead to that problem: 1) io_bitmap_exit() should not invoke task_update_io_bitmap() when the task, which is cleaned up, is not the current task. That's a clear indicator for a cleanup after a failed fork(). 2) A task should not have TIF_IO_BITMAP set and neither a bitmap installed nor IOPL emulation level 3 activated. This happens when a kernel thread is created in the context of a user space thread, which has TIF_IO_BITMAP set as the thread flags are copied and the IO bitmap pointer is cleared. Other than in the failed fork() case this has no impact because kernel threads including IO workers never return to user space and therefore never invoke tss_update_io_bitmap(). Cure this by adding the missing cleanups and checks: 1) Prevent io_bitmap_exit() to invoke task_update_io_bitmap() if the to be cleaned up task is not the current task. 2) Clear TIF_IO_BITMAP in copy_thread() unconditionally. For user space forks it is set later, when the IO bitmap is inherited in io_bitmap_share(). For paranoia sake, add a warning into tss_update_io_bitmap() to catch the case, when that code is invoked with inconsistent state.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: Disable SCO support if READ_VOICE_SETTING is unsupported/broken A SCO connection without the proper voice_setting can cause the controller to lock up.

In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: don't warn when if there is a FW error iwl_trans_reclaim is warning if it is called when the FW is not alive. But if it is called when there is a pending restart, i.e. after a FW error, there is no need to warn, instead - return silently.

In the Linux kernel, the following vulnerability has been resolved: net: cadence: macb: Fix a possible deadlock in macb_halt_tx. There is a situation where after THALT is set high, TGO stays high as well. Because jiffies are never updated, as we are in a context with interrupts disabled, we never exit that loop and have a deadlock. That deadlock was noticed on a sama5d4 device that stayed locked for days. Use retries instead of jiffies so that the timeout really works and we do not have a deadlock anymore.

The PeepSo Core: Groups plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the Group Description field in all versions up to, and including, 6.4.6.0 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with Subscriber-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page.

The Element Pack Addons for Elementor plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the ‘data-caption’ attribute in all versions up to, and including, 8.0.0 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with Contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page.

Improper Neutralization of Input During Web Page Generation (XSS or 'Cross-site Scripting') vulnerability in Laundry on Linux, MacOS allows Account Takeover. This issue affects Laundry: 2.3.0.