CVE Database

A maliciously crafted RFA, RTE, or RVT file, when parsed through Autodesk Revit, can force a Memory Corruption vulnerability. A malicious actor can leverage this vulnerability to execute arbitrary code in the context of the current process.

An issue has been discovered in GitLab CE/EE affecting all versions from 17.11 before 17.11.6, 18.0 before 18.0.4, and 18.1 before 18.1.2 that, under certain conditions, could have allowed a successful attacker to execute actions on behalf of users by injecting malicious content.

Use of Hard-coded Credentials vulnerability in Mitsubishi Electric Corporation photovoltaic system monitor “EcoGuideTAB” PV-DR004J all versions and PV-DR004JA all versions allows an attacker within the Wi-Fi communication range between the units of the product (measurement unit and display unit) to disclose information such as generated power and electricity sold back to the grid stored in the product, tamper with or destroy stored or configured information in the product, or cause a Denial-of-Service (DoS) condition on the product, by using hardcoded user ID and password common to the product series obtained by exploiting CVE-2025-5022. The affected products discontinued in 2015, support ended in 2020.

In the Linux kernel, the following vulnerability has been resolved: wifi: p54: prevent buffer-overflow in p54_rx_eeprom_readback() Robert Morris reported: |If a malicious USB device pretends to be an Intersil p54 wifi |interface and generates an eeprom_readback message with a large |eeprom->v1.len, p54_rx_eeprom_readback() will copy data from the |message beyond the end of priv->eeprom. | |static void p54_rx_eeprom_readback(struct p54_common *priv, | struct sk_buff *skb) |{ | struct p54_hdr *hdr = (struct p54_hdr *) skb->data; | struct p54_eeprom_lm86 *eeprom = (struct p54_eeprom_lm86 *) hdr->data; | | if (priv->fw_var >= 0x509) { | memcpy(priv->eeprom, eeprom->v2.data, | le16_to_cpu(eeprom->v2.len)); | } else { | memcpy(priv->eeprom, eeprom->v1.data, | le16_to_cpu(eeprom->v1.len)); | } | [...] The eeprom->v{1,2}.len is set by the driver in p54_download_eeprom(). The device is supposed to provide the same length back to the driver. But yes, it's possible (like shown in the report) to alter the value to something that causes a crash/panic due to overrun. This patch addresses the issue by adding the size to the common device context, so p54_rx_eeprom_readback no longer relies on possibly tampered values... That said, it also checks if the "firmware" altered the value and no longer copies them. The one, small saving grace is: Before the driver tries to read the eeprom, it needs to upload >a< firmware. the vendor firmware has a proprietary license and as a reason, it is not present on most distributions by default.

In the Linux kernel, the following vulnerability has been resolved: ftrace: Fix UAF when lookup kallsym after ftrace disabled The following issue happens with a buggy module: BUG: unable to handle page fault for address: ffffffffc05d0218 PGD 1bd66f067 P4D 1bd66f067 PUD 1bd671067 PMD 101808067 PTE 0 Oops: Oops: 0000 [#1] SMP KASAN PTI Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS RIP: 0010:sized_strscpy+0x81/0x2f0 RSP: 0018:ffff88812d76fa08 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffffffffc0601010 RCX: dffffc0000000000 RDX: 0000000000000038 RSI: dffffc0000000000 RDI: ffff88812608da2d RBP: 8080808080808080 R08: ffff88812608da2d R09: ffff88812608da68 R10: ffff88812608d82d R11: ffff88812608d810 R12: 0000000000000038 R13: ffff88812608da2d R14: ffffffffc05d0218 R15: fefefefefefefeff FS: 00007fef552de740(0000) GS:ffff8884251c7000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffc05d0218 CR3: 00000001146f0000 CR4: 00000000000006f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ftrace_mod_get_kallsym+0x1ac/0x590 update_iter_mod+0x239/0x5b0 s_next+0x5b/0xa0 seq_read_iter+0x8c9/0x1070 seq_read+0x249/0x3b0 proc_reg_read+0x1b0/0x280 vfs_read+0x17f/0x920 ksys_read+0xf3/0x1c0 do_syscall_64+0x5f/0x2e0 entry_SYSCALL_64_after_hwframe+0x76/0x7e The above issue may happen as follows: (1) Add kprobe tracepoint; (2) insmod test.ko; (3) Module triggers ftrace disabled; (4) rmmod test.ko; (5) cat /proc/kallsyms; --> Will trigger UAF as test.ko already removed; ftrace_mod_get_kallsym() ... strscpy(module_name, mod_map->mod->name, MODULE_NAME_LEN); ... The problem is when a module triggers an issue with ftrace and sets ftrace_disable. The ftrace_disable is set when an anomaly is discovered and to prevent any more damage, ftrace stops all text modification. The issue that happened was that the ftrace_disable stops more than just the text modification. When a module is loaded, its init functions can also be traced. Because kallsyms deletes the init functions after a module has loaded, ftrace saves them when the module is loaded and function tracing is enabled. This allows the output of the function trace to show the init function names instead of just their raw memory addresses. When a module is removed, ftrace_release_mod() is called, and if ftrace_disable is set, it just returns without doing anything more. The problem here is that it leaves the mod_list still around and if kallsyms is called, it will call into this code and access the module memory that has already been freed as it will return: strscpy(module_name, mod_map->mod->name, MODULE_NAME_LEN); Where the "mod" no longer exists and triggers a UAF bug.

In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7996: drop fragments with multicast or broadcast RA IEEE 802.11 fragmentation can only be applied to unicast frames. Therefore, drop fragments with multicast or broadcast RA. This patch addresses vulnerabilities such as CVE-2020-26145.

In the Linux kernel, the following vulnerability has been resolved: software node: Correct a OOB check in software_node_get_reference_args() software_node_get_reference_args() wants to get @index-th element, so the property value requires at least '(index + 1) * sizeof(*ref)' bytes but that can not be guaranteed by current OOB check, and may cause OOB for malformed property. Fix by using as OOB check '((index + 1) * sizeof(*ref) > prop->length)'.

In the Linux kernel, the following vulnerability has been resolved: eth: fbnic: avoid double free when failing to DMA-map FW msg The semantics are that caller of fbnic_mbx_map_msg() retains the ownership of the message on error. All existing callers dutifully free the page.

In the Linux kernel, the following vulnerability has been resolved: firmware: cs_dsp: Fix OOB memory read access in KUnit test KASAN reported out of bounds access - cs_dsp_mock_bin_add_name_or_info(), because the source string length was rounded up to the allocation size.

In the Linux kernel, the following vulnerability has been resolved: powerpc/bpf: fix JIT code size calculation of bpf trampoline arch_bpf_trampoline_size() provides JIT size of the BPF trampoline before the buffer for JIT'ing it is allocated. The total number of instructions emitted for BPF trampoline JIT code depends on where the final image is located. So, the size arrived at with the dummy pass in arch_bpf_trampoline_size() can vary from the actual size needed in arch_prepare_bpf_trampoline(). When the instructions accounted in arch_bpf_trampoline_size() is less than the number of instructions emitted during the actual JIT compile of the trampoline, the below warning is produced: WARNING: CPU: 8 PID: 204190 at arch/powerpc/net/bpf_jit_comp.c:981 __arch_prepare_bpf_trampoline.isra.0+0xd2c/0xdcc which is: /* Make sure the trampoline generation logic doesn't overflow */ if (image && WARN_ON_ONCE(&image[ctx->idx] > (u32 *)rw_image_end - BPF_INSN_SAFETY)) { So, during the dummy pass, instead of providing some arbitrary image location, account for maximum possible instructions if and when there is a dependency with image location for JIT'ing.

In the Linux kernel, the following vulnerability has been resolved: fs/nfs/read: fix double-unlock bug in nfs_return_empty_folio() Sometimes, when a file was read while it was being truncated by another NFS client, the kernel could deadlock because folio_unlock() was called twice, and the second call would XOR back the `PG_locked` flag. Most of the time (depending on the timing of the truncation), nobody notices the problem because folio_unlock() gets called three times, which flips `PG_locked` back off: 1. vfs_read, nfs_read_folio, ... nfs_read_add_folio, nfs_return_empty_folio 2. vfs_read, nfs_read_folio, ... netfs_read_collection, netfs_unlock_abandoned_read_pages 3. vfs_read, ... nfs_do_read_folio, nfs_read_add_folio, nfs_return_empty_folio The problem is that nfs_read_add_folio() is not supposed to unlock the folio if fscache is enabled, and a nfs_netfs_folio_unlock() check is missing in nfs_return_empty_folio(). Rarely this leads to a warning in netfs_read_collection(): ------------[ cut here ]------------ R=0000031c: folio 10 is not locked WARNING: CPU: 0 PID: 29 at fs/netfs/read_collect.c:133 netfs_read_collection+0x7c0/0xf00 [...] Workqueue: events_unbound netfs_read_collection_worker RIP: 0010:netfs_read_collection+0x7c0/0xf00 [...] Call Trace: <TASK> netfs_read_collection_worker+0x67/0x80 process_one_work+0x12e/0x2c0 worker_thread+0x295/0x3a0 Most of the time, however, processes just get stuck forever in folio_wait_bit_common(), waiting for `PG_locked` to disappear, which never happens because nobody is really holding the folio lock.

In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to bail out in get_new_segment() ------------[ cut here ]------------ WARNING: CPU: 3 PID: 579 at fs/f2fs/segment.c:2832 new_curseg+0x5e8/0x6dc pc : new_curseg+0x5e8/0x6dc Call trace: new_curseg+0x5e8/0x6dc f2fs_allocate_data_block+0xa54/0xe28 do_write_page+0x6c/0x194 f2fs_do_write_node_page+0x38/0x78 __write_node_page+0x248/0x6d4 f2fs_sync_node_pages+0x524/0x72c f2fs_write_checkpoint+0x4bc/0x9b0 __checkpoint_and_complete_reqs+0x80/0x244 issue_checkpoint_thread+0x8c/0xec kthread+0x114/0x1bc ret_from_fork+0x10/0x20 get_new_segment() detects inconsistent status in between free_segmap and free_secmap, let's record such error into super block, and bail out get_new_segment() instead of continue using the segment.

In the Linux kernel, the following vulnerability has been resolved: net: ethernet: cortina: Use TOE/TSO on all TCP It is desireable to push the hardware accelerator to also process non-segmented TCP frames: we pass the skb->len to the "TOE/TSO" offloader and it will handle them. Without this quirk the driver becomes unstable and lock up and and crash. I do not know exactly why, but it is probably due to the TOE (TCP offload engine) feature that is coupled with the segmentation feature - it is not possible to turn one part off and not the other, either both TOE and TSO are active, or neither of them. Not having the TOE part active seems detrimental, as if that hardware feature is not really supposed to be turned off. The datasheet says: "Based on packet parsing and TCP connection/NAT table lookup results, the NetEngine puts the packets belonging to the same TCP connection to the same queue for the software to process. The NetEngine puts incoming packets to the buffer or series of buffers for a jumbo packet. With this hardware acceleration, IP/TCP header parsing, checksum validation and connection lookup are offloaded from the software processing." After numerous tests with the hardware locking up after something between minutes and hours depending on load using iperf3 I have concluded this is necessary to stabilize the hardware.

In the Linux kernel, the following vulnerability has been resolved: firmware: cs_dsp: Fix OOB memory read access in KUnit test (ctl cache) KASAN reported out of bounds access - cs_dsp_ctl_cache_init_multiple_offsets(). The code uses mock_coeff_template.length_bytes (4 bytes) for register value allocations. But later, this length is set to 8 bytes which causes test code failures. As fix, just remove the lenght override, keeping the original value 4 for all operations.

In the Linux kernel, the following vulnerability has been resolved: firmware: cs_dsp: Fix OOB memory read access in KUnit test (wmfw info) KASAN reported out of bounds access - cs_dsp_mock_wmfw_add_info(), because the source string length was rounded up to the allocation size.

In the Linux kernel, the following vulnerability has been resolved: net: atm: add lec_mutex syzbot found its way in net/atm/lec.c, and found an error path in lecd_attach() could leave a dangling pointer in dev_lec[]. Add a mutex to protect dev_lecp[] uses from lecd_attach(), lec_vcc_attach() and lec_mcast_attach(). Following patch will use this mutex for /proc/net/atm/lec. BUG: KASAN: slab-use-after-free in lecd_attach net/atm/lec.c:751 [inline] BUG: KASAN: slab-use-after-free in lane_ioctl+0x2224/0x23e0 net/atm/lec.c:1008 Read of size 8 at addr ffff88807c7b8e68 by task syz.1.17/6142 CPU: 1 UID: 0 PID: 6142 Comm: syz.1.17 Not tainted 6.16.0-rc1-syzkaller-00239-g08215f5486ec #0 PREEMPT(full) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/07/2025 Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:408 [inline] print_report+0xcd/0x680 mm/kasan/report.c:521 kasan_report+0xe0/0x110 mm/kasan/report.c:634 lecd_attach net/atm/lec.c:751 [inline] lane_ioctl+0x2224/0x23e0 net/atm/lec.c:1008 do_vcc_ioctl+0x12c/0x930 net/atm/ioctl.c:159 sock_do_ioctl+0x118/0x280 net/socket.c:1190 sock_ioctl+0x227/0x6b0 net/socket.c:1311 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:907 [inline] __se_sys_ioctl fs/ioctl.c:893 [inline] __x64_sys_ioctl+0x18e/0x210 fs/ioctl.c:893 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xcd/0x4c0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f </TASK> Allocated by task 6132: kasan_save_stack+0x33/0x60 mm/kasan/common.c:47 kasan_save_track+0x14/0x30 mm/kasan/common.c:68 poison_kmalloc_redzone mm/kasan/common.c:377 [inline] __kasan_kmalloc+0xaa/0xb0 mm/kasan/common.c:394 kasan_kmalloc include/linux/kasan.h:260 [inline] __do_kmalloc_node mm/slub.c:4328 [inline] __kvmalloc_node_noprof+0x27b/0x620 mm/slub.c:5015 alloc_netdev_mqs+0xd2/0x1570 net/core/dev.c:11711 lecd_attach net/atm/lec.c:737 [inline] lane_ioctl+0x17db/0x23e0 net/atm/lec.c:1008 do_vcc_ioctl+0x12c/0x930 net/atm/ioctl.c:159 sock_do_ioctl+0x118/0x280 net/socket.c:1190 sock_ioctl+0x227/0x6b0 net/socket.c:1311 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:907 [inline] __se_sys_ioctl fs/ioctl.c:893 [inline] __x64_sys_ioctl+0x18e/0x210 fs/ioctl.c:893 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xcd/0x4c0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f Freed by task 6132: kasan_save_stack+0x33/0x60 mm/kasan/common.c:47 kasan_save_track+0x14/0x30 mm/kasan/common.c:68 kasan_save_free_info+0x3b/0x60 mm/kasan/generic.c:576 poison_slab_object mm/kasan/common.c:247 [inline] __kasan_slab_free+0x51/0x70 mm/kasan/common.c:264 kasan_slab_free include/linux/kasan.h:233 [inline] slab_free_hook mm/slub.c:2381 [inline] slab_free mm/slub.c:4643 [inline] kfree+0x2b4/0x4d0 mm/slub.c:4842 free_netdev+0x6c5/0x910 net/core/dev.c:11892 lecd_attach net/atm/lec.c:744 [inline] lane_ioctl+0x1ce8/0x23e0 net/atm/lec.c:1008 do_vcc_ioctl+0x12c/0x930 net/atm/ioctl.c:159 sock_do_ioctl+0x118/0x280 net/socket.c:1190 sock_ioctl+0x227/0x6b0 net/socket.c:1311 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:907 [inline] __se_sys_ioctl fs/ioctl.c:893 [inline] __x64_sys_ioctl+0x18e/0x210 fs/ioctl.c:893

In the Linux kernel, the following vulnerability has been resolved: smb: Log an error when close_all_cached_dirs fails Under low-memory conditions, close_all_cached_dirs() can't move the dentries to a separate list to dput() them once the locks are dropped. This will result in a "Dentry still in use" error, so add an error message that makes it clear this is what happened: [ 495.281119] CIFS: VFS: \\otters.example.com\share Out of memory while dropping dentries [ 495.281595] ------------[ cut here ]------------ [ 495.281887] BUG: Dentry ffff888115531138{i=78,n=/} still in use (2) [unmount of cifs cifs] [ 495.282391] WARNING: CPU: 1 PID: 2329 at fs/dcache.c:1536 umount_check+0xc8/0xf0 Also, bail out of looping through all tcons as soon as a single allocation fails, since we're already in trouble, and kmalloc() attempts for subseqeuent tcons are likely to fail just like the first one did.

In the Linux kernel, the following vulnerability has been resolved: arm64/ptrace: Fix stack-out-of-bounds read in regs_get_kernel_stack_nth() KASAN reports a stack-out-of-bounds read in regs_get_kernel_stack_nth(). Call Trace: [ 97.283505] BUG: KASAN: stack-out-of-bounds in regs_get_kernel_stack_nth+0xa8/0xc8 [ 97.284677] Read of size 8 at addr ffff800089277c10 by task 1.sh/2550 [ 97.285732] [ 97.286067] CPU: 7 PID: 2550 Comm: 1.sh Not tainted 6.6.0+ #11 [ 97.287032] Hardware name: linux,dummy-virt (DT) [ 97.287815] Call trace: [ 97.288279] dump_backtrace+0xa0/0x128 [ 97.288946] show_stack+0x20/0x38 [ 97.289551] dump_stack_lvl+0x78/0xc8 [ 97.290203] print_address_description.constprop.0+0x84/0x3c8 [ 97.291159] print_report+0xb0/0x280 [ 97.291792] kasan_report+0x84/0xd0 [ 97.292421] __asan_load8+0x9c/0xc0 [ 97.293042] regs_get_kernel_stack_nth+0xa8/0xc8 [ 97.293835] process_fetch_insn+0x770/0xa30 [ 97.294562] kprobe_trace_func+0x254/0x3b0 [ 97.295271] kprobe_dispatcher+0x98/0xe0 [ 97.295955] kprobe_breakpoint_handler+0x1b0/0x210 [ 97.296774] call_break_hook+0xc4/0x100 [ 97.297451] brk_handler+0x24/0x78 [ 97.298073] do_debug_exception+0xac/0x178 [ 97.298785] el1_dbg+0x70/0x90 [ 97.299344] el1h_64_sync_handler+0xcc/0xe8 [ 97.300066] el1h_64_sync+0x78/0x80 [ 97.300699] kernel_clone+0x0/0x500 [ 97.301331] __arm64_sys_clone+0x70/0x90 [ 97.302084] invoke_syscall+0x68/0x198 [ 97.302746] el0_svc_common.constprop.0+0x11c/0x150 [ 97.303569] do_el0_svc+0x38/0x50 [ 97.304164] el0_svc+0x44/0x1d8 [ 97.304749] el0t_64_sync_handler+0x100/0x130 [ 97.305500] el0t_64_sync+0x188/0x190 [ 97.306151] [ 97.306475] The buggy address belongs to stack of task 1.sh/2550 [ 97.307461] and is located at offset 0 in frame: [ 97.308257] __se_sys_clone+0x0/0x138 [ 97.308910] [ 97.309241] This frame has 1 object: [ 97.309873] [48, 184) 'args' [ 97.309876] [ 97.310749] The buggy address belongs to the virtual mapping at [ 97.310749] [ffff800089270000, ffff800089279000) created by: [ 97.310749] dup_task_struct+0xc0/0x2e8 [ 97.313347] [ 97.313674] The buggy address belongs to the physical page: [ 97.314604] page: refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x14f69a [ 97.315885] flags: 0x15ffffe00000000(node=1|zone=2|lastcpupid=0xfffff) [ 97.316957] raw: 015ffffe00000000 0000000000000000 dead000000000122 0000000000000000 [ 97.318207] raw: 0000000000000000 0000000000000000 00000001ffffffff 0000000000000000 [ 97.319445] page dumped because: kasan: bad access detected [ 97.320371] [ 97.320694] Memory state around the buggy address: [ 97.321511] ffff800089277b00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 97.322681] ffff800089277b80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 97.323846] >ffff800089277c00: 00 00 f1 f1 f1 f1 f1 f1 00 00 00 00 00 00 00 00 [ 97.325023] ^ [ 97.325683] ffff800089277c80: 00 00 00 00 00 00 00 00 00 f3 f3 f3 f3 f3 f3 f3 [ 97.326856] ffff800089277d00: f3 f3 00 00 00 00 00 00 00 00 00 00 00 00 00 00 This issue seems to be related to the behavior of some gcc compilers and was also fixed on the s390 architecture before: commit d93a855c31b7 ("s390/ptrace: Avoid KASAN false positives in regs_get_kernel_stack_nth()") As described in that commit, regs_get_kernel_stack_nth() has confirmed that `addr` is on the stack, so reading the value at `*addr` should be allowed. Use READ_ONCE_NOCHECK() helper to silence the KASAN check for this case. [will: Use '*addr' as the argument to READ_ONCE_NOCHECK()]

In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: Fix buffer overflow in debugfs If the user tries to write more than 32 bytes then it results in memory corruption. Fortunately, this is debugfs so it's limited to root users.

In the Linux kernel, the following vulnerability has been resolved: virtio-pci: Fix result size returned for the admin command completion The result size returned by virtio_pci_admin_dev_parts_get() is 8 bytes larger than the actual result data size. This occurs because the result_sg_size field of the command is filled with the result length from virtqueue_get_buf(), which includes both the data size and an additional 8 bytes of status. This oversized result size causes two issues: 1. The state transferred to the destination includes 8 bytes of extra data at the end. 2. The allocated buffer in the kernel may be smaller than the returned size, leading to failures when reading beyond the allocated size. The commit fixes this by subtracting the status size from the result of virtqueue_get_buf(). This fix has been tested through live migrations with virtio-net, virtio-net-transitional, and virtio-blk devices.

In the Linux kernel, the following vulnerability has been resolved: bus: fsl-mc: fix double-free on mc_dev The blamed commit tried to simplify how the deallocations are done but, in the process, introduced a double-free on the mc_dev variable. In case the MC device is a DPRC, a new mc_bus is allocated and the mc_dev variable is just a reference to one of its fields. In this circumstance, on the error path only the mc_bus should be freed. This commit introduces back the following checkpatch warning which is a false-positive. WARNING: kfree(NULL) is safe and this check is probably not required + if (mc_bus) + kfree(mc_bus);

In the Linux kernel, the following vulnerability has been resolved: fs/fhandle.c: fix a race in call of has_locked_children() may_decode_fh() is calling has_locked_children() while holding no locks. That's an oopsable race... The rest of the callers are safe since they are holding namespace_sem and are guaranteed a positive refcount on the mount in question. Rename the current has_locked_children() to __has_locked_children(), make it static and switch the fs/namespace.c users to it. Make has_locked_children() a wrapper for __has_locked_children(), calling the latter under read_seqlock_excl(&mount_lock).

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: eir: Fix possible crashes on eir_create_adv_data eir_create_adv_data may attempt to add EIR_FLAGS and EIR_TX_POWER without checking if that would fit.

In the Linux kernel, the following vulnerability has been resolved: EDAC/skx_common: Fix general protection fault After loading i10nm_edac (which automatically loads skx_edac_common), if unload only i10nm_edac, then reload it and perform error injection testing, a general protection fault may occur: mce: [Hardware Error]: Machine check events logged Oops: general protection fault ... ... Workqueue: events mce_gen_pool_process RIP: 0010:string+0x53/0xe0 ... Call Trace: <TASK> ? die_addr+0x37/0x90 ? exc_general_protection+0x1e7/0x3f0 ? asm_exc_general_protection+0x26/0x30 ? string+0x53/0xe0 vsnprintf+0x23e/0x4c0 snprintf+0x4d/0x70 skx_adxl_decode+0x16a/0x330 [skx_edac_common] skx_mce_check_error.part.0+0xf8/0x220 [skx_edac_common] skx_mce_check_error+0x17/0x20 [skx_edac_common] ... The issue arose was because the variable 'adxl_component_count' (inside skx_edac_common), which counts the ADXL components, was not reset. During the reloading of i10nm_edac, the count was incremented by the actual number of ADXL components again, resulting in a count that was double the real number of ADXL components. This led to an out-of-bounds reference to the ADXL component array, causing the general protection fault above. Fix this issue by resetting the 'adxl_component_count' in adxl_put(), which is called during the unloading of {skx,i10nm}_edac.

In the Linux kernel, the following vulnerability has been resolved: perf/amlogic: Replace smp_processor_id() with raw_smp_processor_id() in meson_ddr_pmu_create() The Amlogic DDR PMU driver meson_ddr_pmu_create() function incorrectly uses smp_processor_id(), which assumes disabled preemption. This leads to kernel warnings during module loading because meson_ddr_pmu_create() can be called in a preemptible context. Following kernel warning and stack trace: [ 31.745138] [ T2289] BUG: using smp_processor_id() in preemptible [00000000] code: (udev-worker)/2289 [ 31.745154] [ T2289] caller is debug_smp_processor_id+0x28/0x38 [ 31.745172] [ T2289] CPU: 4 UID: 0 PID: 2289 Comm: (udev-worker) Tainted: GW 6.14.0-0-MANJARO-ARM #1 59519addcbca6ba8de735e151fd7b9e97aac7ff0 [ 31.745181] [ T2289] Tainted: [W]=WARN [ 31.745183] [ T2289] Hardware name: Hardkernel ODROID-N2Plus (DT) [ 31.745188] [ T2289] Call trace: [ 31.745191] [ T2289] show_stack+0x28/0x40 (C) [ 31.745199] [ T2289] dump_stack_lvl+0x4c/0x198 [ 31.745205] [ T2289] dump_stack+0x20/0x50 [ 31.745209] [ T2289] check_preemption_disabled+0xec/0xf0 [ 31.745213] [ T2289] debug_smp_processor_id+0x28/0x38 [ 31.745216] [ T2289] meson_ddr_pmu_create+0x200/0x560 [meson_ddr_pmu_g12 8095101c49676ad138d9961e3eddaee10acca7bd] [ 31.745237] [ T2289] g12_ddr_pmu_probe+0x20/0x38 [meson_ddr_pmu_g12 8095101c49676ad138d9961e3eddaee10acca7bd] [ 31.745246] [ T2289] platform_probe+0x98/0xe0 [ 31.745254] [ T2289] really_probe+0x144/0x3f8 [ 31.745258] [ T2289] __driver_probe_device+0xb8/0x180 [ 31.745261] [ T2289] driver_probe_device+0x54/0x268 [ 31.745264] [ T2289] __driver_attach+0x11c/0x288 [ 31.745267] [ T2289] bus_for_each_dev+0xfc/0x160 [ 31.745274] [ T2289] driver_attach+0x34/0x50 [ 31.745277] [ T2289] bus_add_driver+0x160/0x2b0 [ 31.745281] [ T2289] driver_register+0x78/0x120 [ 31.745285] [ T2289] __platform_driver_register+0x30/0x48 [ 31.745288] [ T2289] init_module+0x30/0xfe0 [meson_ddr_pmu_g12 8095101c49676ad138d9961e3eddaee10acca7bd] [ 31.745298] [ T2289] do_one_initcall+0x11c/0x438 [ 31.745303] [ T2289] do_init_module+0x68/0x228 [ 31.745311] [ T2289] load_module+0x118c/0x13a8 [ 31.745315] [ T2289] __arm64_sys_finit_module+0x274/0x390 [ 31.745320] [ T2289] invoke_syscall+0x74/0x108 [ 31.745326] [ T2289] el0_svc_common+0x90/0xf8 [ 31.745330] [ T2289] do_el0_svc+0x2c/0x48 [ 31.745333] [ T2289] el0_svc+0x60/0x150 [ 31.745337] [ T2289] el0t_64_sync_handler+0x80/0x118 [ 31.745341] [ T2289] el0t_64_sync+0x1b8/0x1c0 Changes replaces smp_processor_id() with raw_smp_processor_id() to ensure safe CPU ID retrieval in preemptible contexts.

In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: fix node corruption in ar->arvifs list In current WLAN recovery code flow, ath11k_core_halt() only reinitializes the "arvifs" list head. This will cause the list node immediately following the list head to become an invalid list node. Because the prev of that node still points to the list head "arvifs", but the next of the list head "arvifs" no longer points to that list node. When a WLAN recovery occurs during the execution of a vif removal, and it happens before the spin_lock_bh(&ar->data_lock) in ath11k_mac_op_remove_interface(), list_del() will detect the previously mentioned situation, thereby triggering a kernel panic. The fix is to remove and reinitialize all vif list nodes from the list head "arvifs" during WLAN halt. The reinitialization is to make the list nodes valid, ensuring that the list_del() in ath11k_mac_op_remove_interface() can execute normally. Call trace: __list_del_entry_valid_or_report+0xb8/0xd0 ath11k_mac_op_remove_interface+0xb0/0x27c [ath11k] drv_remove_interface+0x48/0x194 [mac80211] ieee80211_do_stop+0x6e0/0x844 [mac80211] ieee80211_stop+0x44/0x17c [mac80211] __dev_close_many+0xac/0x150 __dev_change_flags+0x194/0x234 dev_change_flags+0x24/0x6c devinet_ioctl+0x3a0/0x670 inet_ioctl+0x200/0x248 sock_do_ioctl+0x60/0x118 sock_ioctl+0x274/0x35c __arm64_sys_ioctl+0xac/0xf0 invoke_syscall+0x48/0x114 ... Tested-on: QCA6698AQ hw2.1 PCI WLAN.HSP.1.1-04591-QCAHSPSWPL_V1_V2_SILICONZ_IOE-1

In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: fix invalid access to memory In ath12k_dp_rx_msdu_coalesce(), rxcb is fetched from skb and boolean is_continuation is part of rxcb. Currently, after freeing the skb, the rxcb->is_continuation accessed again which is wrong since the memory is already freed. This might lead use-after-free error. Hence, fix by locally defining bool is_continuation from rxcb, so that after freeing skb, is_continuation can be used. Compile tested only.

In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: Prevent sending WMI commands to firmware during firmware crash Currently, we encounter the following kernel call trace when a firmware crash occurs. This happens because the host sends WMI commands to the firmware while it is in recovery, causing the commands to fail and resulting in the kernel call trace. Set the ATH12K_FLAG_CRASH_FLUSH and ATH12K_FLAG_RECOVERY flags when the host driver receives the firmware crash notification from MHI. This prevents sending WMI commands to the firmware during recovery. Call Trace: <TASK> dump_stack_lvl+0x75/0xc0 register_lock_class+0x6be/0x7a0 ? __lock_acquire+0x644/0x19a0 __lock_acquire+0x95/0x19a0 lock_acquire+0x265/0x310 ? ath12k_ce_send+0xa2/0x210 [ath12k] ? find_held_lock+0x34/0xa0 ? ath12k_ce_send+0x56/0x210 [ath12k] _raw_spin_lock_bh+0x33/0x70 ? ath12k_ce_send+0xa2/0x210 [ath12k] ath12k_ce_send+0xa2/0x210 [ath12k] ath12k_htc_send+0x178/0x390 [ath12k] ath12k_wmi_cmd_send_nowait+0x76/0xa0 [ath12k] ath12k_wmi_cmd_send+0x62/0x190 [ath12k] ath12k_wmi_pdev_bss_chan_info_request+0x62/0xc0 [ath1 ath12k_mac_op_get_survey+0x2be/0x310 [ath12k] ieee80211_dump_survey+0x99/0x240 [mac80211] nl80211_dump_survey+0xe7/0x470 [cfg80211] ? kmalloc_reserve+0x59/0xf0 genl_dumpit+0x24/0x70 netlink_dump+0x177/0x360 __netlink_dump_start+0x206/0x280 genl_family_rcv_msg_dumpit.isra.22+0x8a/0xe0 ? genl_family_rcv_msg_attrs_parse.isra.23+0xe0/0xe0 ? genl_op_lock.part.12+0x10/0x10 ? genl_dumpit+0x70/0x70 genl_rcv_msg+0x1d0/0x290 ? nl80211_del_station+0x330/0x330 [cfg80211] ? genl_get_cmd_both+0x50/0x50 netlink_rcv_skb+0x4f/0x100 genl_rcv+0x1f/0x30 netlink_unicast+0x1b6/0x260 netlink_sendmsg+0x31a/0x450 __sock_sendmsg+0xa8/0xb0 ____sys_sendmsg+0x1e4/0x260 ___sys_sendmsg+0x89/0xe0 ? local_clock_noinstr+0xb/0xc0 ? rcu_is_watching+0xd/0x40 ? kfree+0x1de/0x370 ? __sys_sendmsg+0x7a/0xc0 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1

In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: fix node corruption in ar->arvifs list In current WLAN recovery code flow, ath12k_core_halt() only reinitializes the "arvifs" list head. This will cause the list node immediately following the list head to become an invalid list node. Because the prev of that node still points to the list head "arvifs", but the next of the list head "arvifs" no longer points to that list node. When a WLAN recovery occurs during the execution of a vif removal, and it happens before the spin_lock_bh(&ar->data_lock) in ath12k_mac_vdev_delete(), list_del() will detect the previously mentioned situation, thereby triggering a kernel panic. The fix is to remove and reinitialize all vif list nodes from the list head "arvifs" during WLAN halt. The reinitialization is to make the list nodes valid, ensuring that the list_del() in ath12k_mac_vdev_delete() can execute normally. Call trace: __list_del_entry_valid_or_report+0xd4/0x100 (P) ath12k_mac_remove_link_interface.isra.0+0xf8/0x2e4 [ath12k] ath12k_scan_vdev_clean_work+0x40/0x164 [ath12k] cfg80211_wiphy_work+0xfc/0x100 process_one_work+0x164/0x2d0 worker_thread+0x254/0x380 kthread+0xfc/0x100 ret_from_fork+0x10/0x20 The change is mostly copied from the ath11k patch: https://lore.kernel.org/all/20250320053145.3445187-1-quic_stonez@quicinc.com/ Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1

In the Linux kernel, the following vulnerability has been resolved: scsi: lpfc: Avoid potential ndlp use-after-free in dev_loss_tmo_callbk Smatch detected a potential use-after-free of an ndlp oject in dev_loss_tmo_callbk during driver unload or fatal error handling. Fix by reordering code to avoid potential use-after-free if initial nodelist reference has been previously removed.