CVE Database

In the Linux kernel, the following vulnerability has been resolved: md/raid1: Fix stack memory use after return in raid1_reshape In the raid1_reshape function, newpool is allocated on the stack and assigned to conf->r1bio_pool. This results in conf->r1bio_pool.wait.head pointing to a stack address. Accessing this address later can lead to a kernel panic. Example access path: raid1_reshape() { // newpool is on the stack mempool_t newpool, oldpool; // initialize newpool.wait.head to stack address mempool_init(&newpool, ...); conf->r1bio_pool = newpool; } raid1_read_request() or raid1_write_request() { alloc_r1bio() { mempool_alloc() { // if pool->alloc fails remove_element() { --pool->curr_nr; } } } } mempool_free() { if (pool->curr_nr < pool->min_nr) { // pool->wait.head is a stack address // wake_up() will try to access this invalid address // which leads to a kernel panic return; wake_up(&pool->wait); } } Fix: reinit conf->r1bio_pool.wait after assigning newpool.

In the Linux kernel, the following vulnerability has been resolved: nbd: fix uaf in nbd_genl_connect() error path There is a use-after-free issue in nbd: block nbd6: Receive control failed (result -104) block nbd6: shutting down sockets ================================================================== BUG: KASAN: slab-use-after-free in recv_work+0x694/0xa80 drivers/block/nbd.c:1022 Write of size 4 at addr ffff8880295de478 by task kworker/u33:0/67 CPU: 2 UID: 0 PID: 67 Comm: kworker/u33:0 Not tainted 6.15.0-rc5-syzkaller-00123-g2c89c1b655c0 #0 PREEMPT(full) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 Workqueue: nbd6-recv recv_work Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:408 [inline] print_report+0xc3/0x670 mm/kasan/report.c:521 kasan_report+0xe0/0x110 mm/kasan/report.c:634 check_region_inline mm/kasan/generic.c:183 [inline] kasan_check_range+0xef/0x1a0 mm/kasan/generic.c:189 instrument_atomic_read_write include/linux/instrumented.h:96 [inline] atomic_dec include/linux/atomic/atomic-instrumented.h:592 [inline] recv_work+0x694/0xa80 drivers/block/nbd.c:1022 process_one_work+0x9cc/0x1b70 kernel/workqueue.c:3238 process_scheduled_works kernel/workqueue.c:3319 [inline] worker_thread+0x6c8/0xf10 kernel/workqueue.c:3400 kthread+0x3c2/0x780 kernel/kthread.c:464 ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:153 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245 </TASK> nbd_genl_connect() does not properly stop the device on certain error paths after nbd_start_device() has been called. This causes the error path to put nbd->config while recv_work continue to use the config after putting it, leading to use-after-free in recv_work. This patch moves nbd_start_device() after the backend file creation.

In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Fix race between DIM disable and net_dim() There's a race between disabling DIM and NAPI callbacks using the dim pointer on the RQ or SQ. If NAPI checks the DIM state bit and sees it still set, it assumes `rq->dim` or `sq->dim` is valid. But if DIM gets disabled right after that check, the pointer might already be set to NULL, leading to a NULL pointer dereference in net_dim(). Fix this by calling `synchronize_net()` before freeing the DIM context. This ensures all in-progress NAPI callbacks are finished before the pointer is cleared. Kernel log: BUG: kernel NULL pointer dereference, address: 0000000000000000 ... RIP: 0010:net_dim+0x23/0x190 ... Call Trace: <TASK> ? __die+0x20/0x60 ? page_fault_oops+0x150/0x3e0 ? common_interrupt+0xf/0xa0 ? sysvec_call_function_single+0xb/0x90 ? exc_page_fault+0x74/0x130 ? asm_exc_page_fault+0x22/0x30 ? net_dim+0x23/0x190 ? mlx5e_poll_ico_cq+0x41/0x6f0 [mlx5_core] ? sysvec_apic_timer_interrupt+0xb/0x90 mlx5e_handle_rx_dim+0x92/0xd0 [mlx5_core] mlx5e_napi_poll+0x2cd/0xac0 [mlx5_core] ? mlx5e_poll_ico_cq+0xe5/0x6f0 [mlx5_core] busy_poll_stop+0xa2/0x200 ? mlx5e_napi_poll+0x1d9/0xac0 [mlx5_core] ? mlx5e_trigger_irq+0x130/0x130 [mlx5_core] __napi_busy_loop+0x345/0x3b0 ? sysvec_call_function_single+0xb/0x90 ? asm_sysvec_call_function_single+0x16/0x20 ? sysvec_apic_timer_interrupt+0xb/0x90 ? pcpu_free_area+0x1e4/0x2e0 napi_busy_loop+0x11/0x20 xsk_recvmsg+0x10c/0x130 sock_recvmsg+0x44/0x70 __sys_recvfrom+0xbc/0x130 ? __schedule+0x398/0x890 __x64_sys_recvfrom+0x20/0x30 do_syscall_64+0x4c/0x100 entry_SYSCALL_64_after_hwframe+0x4b/0x53 ... ---[ end trace 0000000000000000 ]--- ... ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]---

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix potential use-after-free in oplock/lease break ack If ksmbd_iov_pin_rsp return error, use-after-free can happen by accessing opinfo->state and opinfo_put and ksmbd_fd_put could called twice.

An authenticated remote code execution vulnerability exists in GetSimpleCMS version 3.2.1. The application’s upload.php endpoint allows authenticated users to upload arbitrary files without proper validation of MIME types or extensions. By uploading a .pht file containing PHP code, an attacker can bypass blacklist-based restrictions and place executable code within the web root. A crafted request using a polyglot or disguised extension allows the attacker to execute the payload by accessing the file directly via the web server. This vulnerability exists due to the use of a blacklist for filtering file types instead of a whitelist.

A vulnerability classified as critical has been found in Tenda AC20 up to 16.03.08.12. Affected is an unknown function of the file /goform/SetSysTimeCfg of the component httpd. The manipulation of the argument timeZone leads to buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used.

A vulnerability was found in D-Link DIR-513 1.0. It has been rated as critical. This issue affects the function formLanguageChange of the file /goform/formLanguageChange of the component HTTP POST Request Handler. The manipulation of the argument curTime leads to stack-based buffer overflow. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

A Cross-Site Scripting (XSS) vulnerability exists in the OPAC search feature of Koha Library Management System v24.05. Unsanitized input entered in the search field is reflected in the search history interface, leading to the execution of arbitrary JavaScript in the browser context when the user interacts with the interface.

Unitree Go1 <= Go1_2022_05_11 is vulnerable to Insecure Permissions as the firmware update functionality (via Wi-Fi/Ethernet) implements an insecure verification mechanism that solely relies on MD5 checksums for firmware integrity validation.

In the Linux kernel, the following vulnerability has been resolved: riscv: vector: Fix context save/restore with xtheadvector Previously only v0-v7 were correctly saved/restored, and the context of v8-v31 are damanged. Correctly save/restore v8-v31 to avoid breaking userspace.

In the Linux kernel, the following vulnerability has been resolved: Revert "riscv: Define TASK_SIZE_MAX for __access_ok()" This reverts commit ad5643cf2f69 ("riscv: Define TASK_SIZE_MAX for __access_ok()"). This commit changes TASK_SIZE_MAX to be LONG_MAX to optimize access_ok(), because the previous TASK_SIZE_MAX (default to TASK_SIZE) requires some computation. The reasoning was that all user addresses are less than LONG_MAX, and all kernel addresses are greater than LONG_MAX. Therefore access_ok() can filter kernel addresses. Addresses between TASK_SIZE and LONG_MAX are not valid user addresses, but access_ok() let them pass. That was thought to be okay, because they are not valid addresses at hardware level. Unfortunately, one case is missed: get_user_pages_fast() happily accepts addresses between TASK_SIZE and LONG_MAX. futex(), for instance, uses get_user_pages_fast(). This causes the problem reported by Robert [1]. Therefore, revert this commit. TASK_SIZE_MAX is changed to the default: TASK_SIZE. This unfortunately reduces performance, because TASK_SIZE is more expensive to compute compared to LONG_MAX. But correctness first, we can think about optimization later, if required.

In the Linux kernel, the following vulnerability has been resolved: Input: ims-pcu - check record size in ims_pcu_flash_firmware() The "len" variable comes from the firmware and we generally do trust firmware, but it's always better to double check. If the "len" is too large it could result in memory corruption when we do "memcpy(fragment->data, rec->data, len);"

In the Linux kernel, the following vulnerability has been resolved: i2c: tegra: check msg length in SMBUS block read For SMBUS block read, do not continue to read if the message length passed from the device is '0' or greater than the maximum allowed bytes.

In the Linux kernel, the following vulnerability has been resolved: perf: Fix sample vs do_exit() Baisheng Gao reported an ARM64 crash, which Mark decoded as being a synchronous external abort -- most likely due to trying to access MMIO in bad ways. The crash further shows perf trying to do a user stack sample while in exit_mmap()'s tlb_finish_mmu() -- i.e. while tearing down the address space it is trying to access. It turns out that we stop perf after we tear down the userspace mm; a receipie for disaster, since perf likes to access userspace for various reasons. Flip this order by moving up where we stop perf in do_exit(). Additionally, harden PERF_SAMPLE_CALLCHAIN and PERF_SAMPLE_STACK_USER to abort when the current task does not have an mm (exit_mm() makes sure to set current->mm = NULL; before commencing with the actual teardown). Such that CPU wide events don't trip on this same problem.

In the Linux kernel, the following vulnerability has been resolved: ASoC: codecs: wcd9375: Fix double free of regulator supplies Driver gets regulator supplies in probe path with devm_regulator_bulk_get(), so should not call regulator_bulk_free() in error and remove paths to avoid double free.

In the Linux kernel, the following vulnerability has been resolved: net: lan743x: Modify the EEPROM and OTP size for PCI1xxxx devices Maximum OTP and EEPROM size for hearthstone PCI1xxxx devices are 8 Kb and 64 Kb respectively. Adjust max size definitions and return correct EEPROM length based on device. Also prevent out-of-bound read/write.

In the Linux kernel, the following vulnerability has been resolved: platform/x86/amd: pmf: Use device managed allocations If setting up smart PC fails for any reason then this can lead to a double free when unloading amd-pmf. This is because dev->buf was freed but never set to NULL and is again freed in amd_pmf_remove(). To avoid subtle allocation bugs in failures leading to a double free change all allocations into device managed allocations.

An issue in ETSI Open-Source MANO (OSM) 14.0.x before 14.0.3, 15.0.x before 15.0.2, 16.0.0, and 17.0.0 allows a remote authenticated attacker to escalate privileges via the /osm/admin/v1/users component.

In the Linux kernel, the following vulnerability has been resolved: NFC: nci: uart: Set tty->disc_data only in success path Setting tty->disc_data before opening the NCI device means we need to clean it up on error paths. This also opens some short window if device starts sending data, even before NCIUARTSETDRIVER IOCTL succeeded (broken hardware?). Close the window by exposing tty->disc_data only on the success path, when opening of the NCI device and try_module_get() succeeds. The code differs in error path in one aspect: tty->disc_data won't be ever assigned thus NULL-ified. This however should not be relevant difference, because of "tty->disc_data=NULL" in nci_uart_tty_open().

In the Linux kernel, the following vulnerability has been resolved: Squashfs: check return result of sb_min_blocksize Syzkaller reports an "UBSAN: shift-out-of-bounds in squashfs_bio_read" bug. Syzkaller forks multiple processes which after mounting the Squashfs filesystem, issues an ioctl("/dev/loop0", LOOP_SET_BLOCK_SIZE, 0x8000). Now if this ioctl occurs at the same time another process is in the process of mounting a Squashfs filesystem on /dev/loop0, the failure occurs. When this happens the following code in squashfs_fill_super() fails. ---- msblk->devblksize = sb_min_blocksize(sb, SQUASHFS_DEVBLK_SIZE); msblk->devblksize_log2 = ffz(~msblk->devblksize); ---- sb_min_blocksize() returns 0, which means msblk->devblksize is set to 0. As a result, ffz(~msblk->devblksize) returns 64, and msblk->devblksize_log2 is set to 64. This subsequently causes the UBSAN: shift-out-of-bounds in fs/squashfs/block.c:195:36 shift exponent 64 is too large for 64-bit type 'u64' (aka 'unsigned long long') This commit adds a check for a 0 return by sb_min_blocksize().

In the Linux kernel, the following vulnerability has been resolved: virtio-net: xsk: rx: fix the frame's length check When calling buf_to_xdp, the len argument is the frame data's length without virtio header's length (vi->hdr_len). We check that len with xsk_pool_get_rx_frame_size() + vi->hdr_len to ensure the provided len does not larger than the allocated chunk size. The additional vi->hdr_len is because in virtnet_add_recvbuf_xsk, we use part of XDP_PACKET_HEADROOM for virtio header and ask the vhost to start placing data from hard_start + XDP_PACKET_HEADROOM - vi->hdr_len not hard_start + XDP_PACKET_HEADROOM But the first buffer has virtio_header, so the maximum frame's length in the first buffer can only be xsk_pool_get_rx_frame_size() not xsk_pool_get_rx_frame_size() + vi->hdr_len like in the current check. This commit adds an additional argument to buf_to_xdp differentiate between the first buffer and other ones to correctly calculate the maximum frame's length.

In the Linux kernel, the following vulnerability has been resolved: platform/x86: dell-wmi-sysman: Fix WMI data block retrieval in sysfs callbacks After retrieving WMI data blocks in sysfs callbacks, check for the validity of them before dereferencing their content.

In the Linux kernel, the following vulnerability has been resolved: genirq/irq_sim: Initialize work context pointers properly Initialize `ops` member's pointers properly by using kzalloc() instead of kmalloc() when allocating the simulation work context. Otherwise the pointers contain random content leading to invalid dereferencing.

In the Linux kernel, the following vulnerability has been resolved: nvmet: fix memory leak of bio integrity If nvmet receives commands with metadata there is a continuous memory leak of kmalloc-128 slab or more precisely bio->bi_integrity. Since commit bf4c89fc8797 ("block: don't call bio_uninit from bio_endio") each user of bio_init has to use bio_uninit as well. Otherwise the bio integrity is not getting free. Nvmet uses bio_init for inline bios. Uninit the inline bio to complete deallocation of integrity in bio.

In the Linux kernel, the following vulnerability has been resolved: vsock/vmci: Clear the vmci transport packet properly when initializing it In vmci_transport_packet_init memset the vmci_transport_packet before populating the fields to avoid any uninitialised data being left in the structure.

In the Linux kernel, the following vulnerability has been resolved: mtk-sd: Prevent memory corruption from DMA map failure If msdc_prepare_data() fails to map the DMA region, the request is not prepared for data receiving, but msdc_start_data() proceeds the DMA with previous setting. Since this will lead a memory corruption, we have to stop the request operation soon after the msdc_prepare_data() fails to prepare it.

In the Linux kernel, the following vulnerability has been resolved: scsi: target: Fix NULL pointer dereference in core_scsi3_decode_spec_i_port() The function core_scsi3_decode_spec_i_port(), in its error code path, unconditionally calls core_scsi3_lunacl_undepend_item() passing the dest_se_deve pointer, which may be NULL. This can lead to a NULL pointer dereference if dest_se_deve remains unset. SPC-3 PR SPEC_I_PT: Unable to locate dest_tpg Unable to handle kernel paging request at virtual address dfff800000000012 Call trace: core_scsi3_lunacl_undepend_item+0x2c/0xf0 [target_core_mod] (P) core_scsi3_decode_spec_i_port+0x120c/0x1c30 [target_core_mod] core_scsi3_emulate_pro_register+0x6b8/0xcd8 [target_core_mod] target_scsi3_emulate_pr_out+0x56c/0x840 [target_core_mod] Fix this by adding a NULL check before calling core_scsi3_lunacl_undepend_item()

In the Linux kernel, the following vulnerability has been resolved: spi: spi-qpic-snand: reallocate BAM transactions Using the mtd_nandbiterrs module for testing the driver occasionally results in weird things like below. 1. swiotlb mapping fails with the following message: [ 85.926216] qcom_snand 79b0000.spi: swiotlb buffer is full (sz: 4294967294 bytes), total 512 (slots), used 0 (slots) [ 85.932937] qcom_snand 79b0000.spi: failure in mapping desc [ 87.999314] qcom_snand 79b0000.spi: failure to write raw page [ 87.999352] mtd_nandbiterrs: error: write_oob failed (-110) Rebooting the board after this causes a panic due to a NULL pointer dereference. 2. If the swiotlb mapping does not fail, rebooting the board may result in a different panic due to a bad spinlock magic: [ 256.104459] BUG: spinlock bad magic on CPU#3, procd/2241 [ 256.104488] Unable to handle kernel paging request at virtual address ffffffff0000049b ... Investigating the issue revealed that these symptoms are results of memory corruption which is caused by out of bounds access within the driver. The driver uses a dynamically allocated structure for BAM transactions, which structure must have enough space for all possible variations of different flash operations initiated by the driver. The required space heavily depends on the actual number of 'codewords' which is calculated from the pagesize of the actual NAND chip. Although the qcom_nandc_alloc() function allocates memory for the BAM transactions during probe, but since the actual number of 'codewords' is not yet know the allocation is done for one 'codeword' only. Because of this, whenever the driver does a flash operation, and the number of the required transactions exceeds the size of the allocated arrays the driver accesses memory out of the allocated range. To avoid this, change the code to free the initially allocated BAM transactions memory, and allocate a new one once the actual number of 'codewords' required for a given NAND chip is known.

In the Linux kernel, the following vulnerability has been resolved: fs: export anon_inode_make_secure_inode() and fix secretmem LSM bypass Export anon_inode_make_secure_inode() to allow KVM guest_memfd to create anonymous inodes with proper security context. This replaces the current pattern of calling alloc_anon_inode() followed by inode_init_security_anon() for creating security context manually. This change also fixes a security regression in secretmem where the S_PRIVATE flag was not cleared after alloc_anon_inode(), causing LSM/SELinux checks to be bypassed for secretmem file descriptors. As guest_memfd currently resides in the KVM module, we need to export this symbol for use outside the core kernel. In the future, guest_memfd might be moved to core-mm, at which point the symbols no longer would have to be exported. When/if that happens is still unclear.

In the Linux kernel, the following vulnerability has been resolved: regulator: gpio: Fix the out-of-bounds access to drvdata::gpiods drvdata::gpiods is supposed to hold an array of 'gpio_desc' pointers. But the memory is allocated for only one pointer. This will lead to out-of-bounds access later in the code if 'config::ngpios' is > 1. So fix the code to allocate enough memory to hold 'config::ngpios' of GPIO descriptors. While at it, also move the check for memory allocation failure to be below the allocation to make it more readable.