CVE Database

In the Linux kernel, the following vulnerability has been resolved: ksmbd: validate NTLMv2 response before updating session key ksmbd_auth_ntlmv2() derives the NTLMv2 session key into sess->sess_key before it verifies the NTLMv2 response. ksmbd_decode_ntlmssp_auth_blob() then continues into KEY_XCH even when ksmbd_auth_ntlmv2() failed. With SMB3 multichannel binding, the failed authentication operates on an existing session and the session setup error path does not expire binding sessions. A client can send a binding session setup with a bad NT proof and KEY_XCH and still modify sess->sess_key before STATUS_LOGON_FAILURE is returned. Relevant path: smb2_sess_setup() -> conn->binding = true -> ntlm_authenticate() -> session_user() -> ksmbd_decode_ntlmssp_auth_blob() -> ksmbd_auth_ntlmv2() -> calc_ntlmv2_hash() -> hmac_md5_usingrawkey(..., sess->sess_key) -> crypto_memneq() returns mismatch -> KEY_XCH arc4_crypt(..., sess->sess_key, ...) -> out_err without expiring the binding session Derive the base session key into a local buffer and copy it to sess->sess_key only after the proof matches. Return immediately on authentication failure so KEY_XCH is only processed after successful authentication.

In the Linux kernel, the following vulnerability has been resolved: smb/client: fix chown/chgrp with SMB3 POSIX Extensions Ownership (chown) and group (chgrp) modifications were being ignored when mounting with SMB3 POSIX Extensions unless CIFS_MOUNT_CIFS_ACL or CIFS_MOUNT_MODE_FROM_SID were also explicitly set. Fix this by checking for posix_extensions in cifs_setattr_nounix() when updating UID and GID, ensuring that id_mode_to_cifs_acl() is called to map and set the ownership/group information on the server.

In the Linux kernel, the following vulnerability has been resolved: smb: client: fix double-free in SMB2_open() replay A response-bearing attempt can return a replayable error and free its response buffer. If SMB2_open_init() fails before the next send, cleanup retains the previous buffer type and frees that response again. Reset response bookkeeping before each attempt to prevent the stale free.

In the Linux kernel, the following vulnerability has been resolved: smb: client: harden POSIX SID length parsing posix_info_sid_size() reads sid[1] to obtain the subauthority count, but its existing boundary check still accepts buffers with only one remaining byte. Require two bytes before reading sid[1] so all client paths that reuse the helper reject truncated POSIX SIDs safely.

In the Linux kernel, the following vulnerability has been resolved: smb: client: mask server-provided mode to 07777 in modefromsid When modefromsid is active, parse_dacl() applies the server-provided sub_auth[2] value from the NFS mode SID to cf_mode without masking to 07777. Apply the correct masking, same as in the read path.

In the Linux kernel, the following vulnerability has been resolved: writeback: fix race between cgroup_writeback_umount() and inode_switch_wbs() When a container exits, the following BUG_ON() is occasionally triggered: ================================================================== VFS: Busy inodes after unmount of sdb (ext4) ------------[ cut here ]------------ kernel BUG at fs/super.c:695! CPU: 3 PID: 6 Comm: containerd-shim Tainted: G OE K 6.6 #1 pstate: 63400009 (nZCv daif +PAN -UAO +TCO +DIT -SSBS BTYPE=--) pc : generic_shutdown_super+0xf0/0x100 lr : generic_shutdown_super+0xf0/0x100 Call trace: generic_shutdown_super+0xf0/0x100 kill_block_super+0x20/0x48 ext4_kill_sb+0x28/0x60 deactivate_locked_super+0x54/0x130 deactivate_super+0x84/0xa0 cleanup_mnt+0xa4/0x140 __cleanup_mnt+0x18/0x28 task_work_run+0x78/0xe0 do_notify_resume+0x204/0x240 ================================================================== The root cause is a race between cgroup_writeback_umount() and inode_switch_wbs()/cleanup_offline_cgwb(). There is a window between inode_prepare_wbs_switch() returning true and the subsequent wb_queue_isw() call. Following is the process that triggers the issue: CPU A (umount) | CPU B (writeback) ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ inode_switch_wbs/cleanup_offline_cgwb atomic_inc(&isw_nr_in_flight) inode_prepare_wbs_switch -> passes SB_ACTIVE check __iget(inode) generic_shutdown_super sb->s_flags &= ~SB_ACTIVE cgroup_writeback_umount(sb) smp_mb() atomic_read(&isw_nr_in_flight) rcu_barrier() -> no pending RCU callbacks flush_workqueue(isw_wq) -> nothing queued, returns evict_inodes(sb) -> Inode skipped as isw still holds a ref. sop->put_super(sb) /* destroys percpu counters */ -> VFS: Busy inodes after unmount! wb_queue_isw() queue_work(isw_wq, ...) /* later in work function */ inode_switch_wbs_work_fn process_inode_switch_wbs iput() -> evict percpu_counter_dec() // UAF! Fix this by extending the RCU read-side critical section in inode_switch_wbs() and cleanup_offline_cgwb() to cover from inode_prepare_wbs_switch() through wb_queue_isw(). Since there is no sleep in this window, rcu_read_lock() can be used. Then add a synchronize_rcu() in cgroup_writeback_umount() before the existing rcu_barrier(), so that all in-flight switchers that have passed the SB_ACTIVE check have completed queue_work() before flush_workqueue() is called. The existing rcu_barrier() is intentionally retained so this fix can be backported unchanged to stable kernels (5.10.y, 6.6.y, ...) that still queue switches via queue_rcu_work(). It is a no-op on current mainline (since commit e1b849cfa6b6 ("writeback: Avoid contention on wb->list_lock when switching inodes")) and is removed in a follow-up patch.

In the Linux kernel, the following vulnerability has been resolved: proc: protect ptrace_may_access() with exec_update_lock (FD links) proc_pid_get_link() and proc_pid_readlink() currently look up the task from the pid once, then do the ptrace access check on that task, then look up the task from the pid a second time to do the actual access. That's racy in several ways. To fix it, pass the task to the ->proc_get_link() handler, and instead of proc_fd_access_allowed(), introduce a new helper call_proc_get_link() that looks up and locks the task, does the access check, and calls ->proc_get_link().

In the Linux kernel, the following vulnerability has been resolved: sched/rt: Have RT_PUSH_IPI be default off for non PREEMPT_RT RT migration is done aggressively. When a CPU schedules out a high priority RT task for a lower priority task, it will look to see if there's any RT tasks that are waiting to run on another CPU that is of higher priority than the task this CPU is about to run. If it finds one, it will pull that task over to the CPU and allow it to run there instead. Normally, this pulling is done by looking at the RT overloaded mask (rto) which contains all the CPUs in the scheduler domain with RT tasks that are waiting to run due to a higher priority RT task currently running on their CPU. The CPU that is about to schedule a lower priority task will grab the rq lock of the overloaded CPU and move the RT task from that CPU's runqueue to the local one and schedule the higher priority RT task. This caused issues when a lot of CPUs would schedule a lower priority task at the same time. They would all try to grab the same runqueue lock of the CPU with the overloaded RT tasks. Only the first CPU that got in will get that task. All the others would wait until they got the runqueue lock and see there's nothing to pull and do nothing. On systems with lots of CPUs, this caused a large latency (up to 500us) which is beyond what PREEMPT_RT is to allow. The solution to that was to create an RT_PUSH_IPI logic. When any CPU wanted to pull a task, instead of grabbing the runqueue lock of the overloaded CPU, it would start by sending an IPI to the overloaded CPU, and that IPI handler would have the CPU with the waiting RT task do a push instead. Then that handler would send an IPI to the next CPU with overloaded RT tasks, and so on. Note, after the first CPU starts this process, if another CPU wanted to do a pull, it would see that the process has already begun and would only increment a counter to have the IPIs continue again. The RT_PUSH_IPI solved the latency problem with PREEMPT_RT but could cause a new issue with non PREEMPT_RT. Namely, softirqs run in a threaded context on PREEMPT_RT but they can run in an interrupt context in non-RT. If an IPI lands on a CPU that has just woken up multiple RT tasks and the current CPU is running a non RT or a low priority RT task, instead of doing a push, it would simply do a schedule on that CPU. But if a softirq was also executing on this CPU, the schedule would need to wait until the softirq finished. Until then, the CPU would still be considered overloaded as there are RT tasks still waiting to run on it. A live lock occurred on a workload that was doing heavy networking traffic on a large machine where the softirqs would run 500us out of 750us. And it would also be waking up RT tasks, causing the RT pull logic to be constantly executed. When a softirq triggered on a CPU with RT tasks queued but not running yet, and the other CPUs would see this CPU as being overloaded, they would send an IPI over to it. The CPU would notice that the waiting RT tasks are of higher priority than the currently running task and simply schedule that CPU instead. But because the softirq was executing, before it could schedule, it would receive another IPI to do the same. The amount of IPIs would slow down the currently running softirq so much that before it could return back to task context, it would execute another softirq never allowing the CPU to schedule. This live locked that CPU. As RT_PUSH_IPI was created to help PREEMPT_RT, make it default off if PREEMPT_RT is not enabled.

In the Linux kernel, the following vulnerability has been resolved: cpufreq: pcc: fix use-after-free and double free in _OSC evaluation pcc_cpufreq_do_osc() calls acpi_evaluate_object() twice for the two-phase _OSC negotiation. Between the two calls it freed output.pointer but left output.length unchanged. Since acpi_evaluate_object() treats a non-zero length with a non-NULL pointer as an existing buffer to write into, the second call wrote into freed memory (use-after-free). The subsequent kfree(output.pointer) at out_free then freed the same pointer a second time (double free). Reset output.pointer to NULL and output.length to ACPI_ALLOCATE_BUFFER after freeing the first result, so ACPICA allocates a fresh buffer for each phase independently.

In the Linux kernel, the following vulnerability has been resolved: mm/slab: do not limit zeroing to orig_size when only red zoning is enabled When init (zeroing) on allocation is requested, for kmalloc() we generally have to zero the full object size even if a smaller size is requested, in order to provide krealloc()'s __GFP_ZERO guarantees. But if we track the requested size, krealloc() uses that information to do the right thing, so we can zero only the requested size. With red zoning also enabled, any extra size became part of the red zone, so it must not be zeroed and thus we must zero only the requested size. However the current check is imprecise, and will trigger also when only SLAB_RED_ZONE is enabled without SLAB_STORE_USER (which enables tracking the requested size). This means enabling red zoning alone can compromise krealloc()'s __GFP_ZERO contract. Fix this by using slub_debug_orig_size() instead, which is the exact check for whether the requested size is tracked. We don't need to care if red zoning is also enabled or not. Also update and expand the comment accordingly.

In the Linux kernel, the following vulnerability has been resolved: HID: hid-goodix-spi: validate report size to prevent stack buffer overflow goodix_hid_set_raw_report() builds a protocol frame in a 128-byte stack buffer (tmp_buf), writing an 11-12 byte header followed by the caller-supplied report data. The HID core caps report size at HID_MAX_BUFFER_SIZE (16384) by default, while the driver does not set hid_ll_driver.max_buffer_size and performs no bounds checking before copying the payload: memcpy(tmp_buf + tx_len, buf, len); A hidraw SET_REPORT ioctl with a report larger than ~116 bytes overflows the stack buffer. Add a size check after constructing the header, rejecting reports that would exceed the buffer capacity. Discovered by Atuin - Automated Vulnerability Discovery Engine.

In the Linux kernel, the following vulnerability has been resolved: HID: wacom: fix slab-out-of-bounds write in wacom_wac_queue_insert wacom_wac_queue_insert() calls kfifo_skip() in a loop when the kfifo doesn't have enough space for the incoming report. If the kfifo is empty, kfifo_skip() reads stale data left in the kmalloc'd buffer via __kfifo_peek_n() and interprets it as a record length, advancing fifo->out by that garbage value. This corrupts the internal kfifo state, causing kfifo_unused() to return a value much larger than the actual buffer size, which bypasses __kfifo_in_r()'s guard: if (len + recsize > kfifo_unused(fifo)) return 0; kfifo_copy_in() then performs an out-of-bounds memcpy, writing up to 3842 bytes past the 256-byte buffer. Add a !kfifo_is_empty() condition to the while loop so kfifo_skip() is never called on an empty fifo, and check the return value of kfifo_in() to reject reports that are too large for the fifo.

In the Linux kernel, the following vulnerability has been resolved: HID: multitouch: fix out-of-bounds bit access on mt_io_flags mt_io_flags is a single unsigned long, but mt_process_slot(), mt_release_pending_palms() and mt_release_contacts() use it as a per-slot bitmap indexed by the slot number. That slot number is only bounded by td->maxcontacts, which is taken from the device's ContactCountMaximum feature report and can be up to 255, not by BITS_PER_LONG. As a result, a multitouch device that advertises a large contact count makes set_bit()/clear_bit() operate past the mt_io_flags word and corrupt the adjacent members of struct mt_device. The sticky-fingers release timer is the easiest way to reach this. mt_release_contacts() runs for (i = 0; i < mt->num_slots; i++) clear_bit(i, &td->mt_io_flags); with num_slots == maxcontacts. For maxcontacts around 250 the loop clears the bits that overlap td->applications.next, zeroing that list head, and the list_for_each_entry() that immediately follows then dereferences NULL. The kernel panics from timer (softirq) context. On a KASAN build this shows up as a general protection fault in mt_release_contacts() with a null-ptr-deref at offset 0x58, which is offsetof(struct mt_application, num_received). The state is reachable from an untrusted USB or Bluetooth HID multitouch device; no local privileges are required. Store the per-slot active state in a separately allocated bitmap sized for maxcontacts, the same pattern already used for pending_palm_slots, and keep only MT_IO_FLAGS_RUNNING in mt_io_flags. The two "mt_io_flags & MT_IO_SLOTS_MASK" arming checks become bitmap_empty(td->active_slots, td->maxcontacts). Move MT_IO_FLAGS_RUNNING back to bit 0. It was bumped to bit 32 by the same commit to leave the low byte for the slot bits; with the slot bits gone it fits in bit 0 again, which also keeps it within the unsigned long on 32-bit.

In the Linux kernel, the following vulnerability has been resolved: hfs/hfsplus: fix u32 overflow in check_and_correct_requested_length check_and_correct_requested_length() compares (off + len) against node_size using u32 arithmetic. When the caller passes a large len value (e.g. from an underflowed subtraction in hfs_brec_remove()), off + len can wrap past 2^32 and produce a small result, causing the bounds check to pass when it should fail. For example, with off=14 and len=0xFFFFFFF2 (underflowed from data_off - keyoffset - size in hfs_brec_remove), off + len wraps to 6, which is less than a typical node_size of 512, so the check passes and the subsequent memmove reads ~4GB past the node buffer. Fix this by widening the addition to u64 before comparing against node_size. This prevents the u32 wrap while keeping the logic straightforward.

In the Linux kernel, the following vulnerability has been resolved: bpf: Validate BTF repeated field counts before expansion btf_parse_struct_metas() walks user-supplied BTF during BPF_BTF_LOAD, and btf_repeat_fields() expands repeatable fields from array elements into the fixed BTF_FIELDS_MAX scratch array used by btf_parse_fields(). The remaining-capacity check performs the expanded field count calculation in u32. A malformed BTF can wrap that calculation, causing the check to pass even when the expanded field count exceeds the scratch array capacity. The following memcpy() can then write past the end of the array. Use checked addition and multiplication before copying repeated fields and reject impossible counts.

In the Linux kernel, the following vulnerability has been resolved: USB: serial: digi_acceleport: fix write buffer corruption The digi_write_inb_command() is supposed to wait for the write urb to become available or return an error, but instead it updates the transfer buffer and tries to resubmit the urb on timeout. To make things worse, for commands like break control where no timeout is used, the driver would corrupt the urb immediately due to a broken jiffies comparison (on 32-bit machines this takes five minutes of uptime to trigger due to INITIAL_JIFFIES). Fix this by adding the missing return on timeout and waiting indefinitely when no timeout has been specified as intended. This issue was (sort of) flagged by Sashiko when reviewing an unrelated change to the driver.

In the Linux kernel, the following vulnerability has been resolved: udf: validate free block extents against the partition length udf_free_blocks() checks the logical block number and count against the partition length, but drops the extent offset from that final bound. A crafted extent can pass the guard while logicalBlockNum + offset + count points past the partition, which later indexes past the space bitmap array. A single ftruncate(2) on a file backed by such an extent reliably panics the kernel. This is a local availability issue. On desktop systems where UDisks/polkit allows the active user to mount removable UDF media without CAP_SYS_ADMIN, an unprivileged local user can supply the crafted filesystem and trigger the panic by truncating a writable file on it. Systems that require root or CAP_SYS_ADMIN to mount the image have a higher prerequisite. No confidentiality or integrity impact is claimed: the reproduced primitive is an out-of-bounds read of a bitmap pointer slot followed by a kernel panic. Use the already computed logicalBlockNum + offset + count value for the partition length check. Also make load_block_bitmap() reject an out-of-range block group before indexing s_block_bitmap[], so corrupted callers cannot walk past the flexible array.

In the Linux kernel, the following vulnerability has been resolved: udf: validate VAT header length against the VAT inode size udf_load_vat() takes the virtual partition's start offset straight from the on-disk VAT 2.0 header without checking it against the VAT inode size: map->s_type_specific.s_virtual.s_start_offset = le16_to_cpu(vat20->lengthHeader); map->s_type_specific.s_virtual.s_num_entries = (sbi->s_vat_inode->i_size - map->s_type_specific.s_virtual.s_start_offset) >> 2; lengthHeader is a fully attacker-controlled 16-bit value. If it exceeds the VAT inode size, the s_num_entries subtraction underflows to a huge count, which defeats the "block > s_num_entries" bound in udf_get_pblock_virt15(); and on the ICB-inline path that function reads ((__le32 *)(iinfo->i_data + s_start_offset))[block] so a large s_start_offset indexes past the inode's in-ICB data. Mounting a crafted UDF image with a virtual (VAT) partition then triggers an out-of-bounds read. Reject a VAT whose header length does not leave room for at least one entry within the VAT inode.

In the Linux kernel, the following vulnerability has been resolved: udf: validate sparing table length as an entry count, not a byte count udf_load_sparable_map() accepts a sparing table when sizeof(*st) + le16_to_cpu(st->reallocationTableLen) > sb->s_blocksize is false, i.e. it treats reallocationTableLen as a number of BYTES that must fit in the block. But the table is walked as an array of 8-byte sparingEntry elements: for (i = 0; i < le16_to_cpu(st->reallocationTableLen); i++) { struct sparingEntry *entry = &st->mapEntry[i]; ... entry->origLocation ... } in udf_get_pblock_spar15() and udf_relocate_blocks(). A reallocationTableLen of N therefore passes the check whenever sizeof(*st) + N <= blocksize, yet the consumers index sizeof(*st) + N * sizeof(struct sparingEntry) bytes -- up to ~8x the block. On a crafted UDF image this is an out-of-bounds read in udf_get_pblock_spar15(); udf_relocate_blocks() additionally feeds the same length to udf_update_tag(), whose crc_itu_t() reads far past the block, and its memmove() through st->mapEntry[] is an out-of-bounds write. Validate reallocationTableLen as the entry count it is, with struct_size().

In the Linux kernel, the following vulnerability has been resolved: partitions: aix: bound the pp_count scan to the ppe array aix_partition() reads the physical volume descriptor into a fixed-size struct pvd and then scans its physical-partition-extent array: int numpps = be16_to_cpu(pvd->pp_count); ... for (i = 0; i < numpps; i += 1) { struct ppe *p = pvd->ppe + i; ... lp_ix = be16_to_cpu(p->lp_ix); pvd points at a single kmalloc()'d struct pvd whose ppe[] member holds a fixed ARRAY_SIZE(pvd->ppe) (1016) entries, but the loop runs up to the on-disk pp_count. pp_count is an unvalidated __be16 read straight from the descriptor, so a crafted AIX image with pp_count larger than 1016 drives the loop to read pvd->ppe[i] past the end of the allocation (up to 65535 entries, ~2 MB out of bounds). The partition scan runs without mounting anything, when a block device with a crafted AIX/IBM partition table appears (an attacker-supplied image attached with losetup -P, or a device auto-scanned by udev), via msdos_partition() -> aix_partition(). Clamp the scan to the number of entries the ppe[] array can hold.

In the Linux kernel, the following vulnerability has been resolved: isofs: bound Rock Ridge symlink components to the SL record get_symlink_chunk() and the SL handling in parse_rock_ridge_inode_internal() walk the variable-length components of a Rock Ridge "SL" (symbolic link) record. Each component is a two-byte header (flags, len) followed by len bytes of text, so it occupies slp->len + 2 bytes. Both loops read slp->len and advance to the next component, and get_symlink_chunk() additionally does memcpy(rpnt, slp->text, slp->len), but neither checks that the component lies within the SL record before dereferencing it. A crafted SL record whose component declares a len that runs past the record (rr->len) therefore triggers an out-of-bounds read of up to 255 bytes. When the record sits at the tail of its backing buffer - for example a small kmalloc()ed continuation block reached through a CE record - the read crosses the allocation; get_symlink_chunk() then copies the out-of-bounds bytes into the symlink body returned to user space by readlink(), disclosing adjacent kernel memory. ISO 9660 images are routinely mounted from untrusted removable media - desktop environments auto-mount them (e.g. via udisks2) without CAP_SYS_ADMIN - so the record contents are attacker-controlled. Reject any component that does not fit in the remaining record bytes before using it. In get_symlink_chunk() return NULL, like the existing output-buffer (plimit) checks, so a malformed record makes readlink() fail with -EIO rather than silently returning a truncated target; in parse_rock_ridge_inode_internal() stop the inode-size walk.

In the Linux kernel, the following vulnerability has been resolved: crypto: caam - use print_hex_dump_devel to guard key hex dumps Use print_hex_dump_devel() for dumping sensitive key material in *_setkey() to avoid leaking secrets at runtime when CONFIG_DYNAMIC_DEBUG is enabled.

In the Linux kernel, the following vulnerability has been resolved: crypto: ecc - Fix carry overflow in vli multiplication The carry flag calculation fails when r01.m_high is saturated (0xFFFFFFFFFFFFFFFF) and addition of lower bits overflows. The condition (r01.m_high < product.m_high) doesn't handle the case where r01.m_high == product.m_high and an additional carry exists from lower-bit overflow. When commit 3c4b23901a0c ("crypto: ecdh - Add ECDH software support") introduced crypto/ecc.c, it split the muladd() function in the micro-ecc library into separate mul_64_64() and add_128_128() helpers. It seems the check got lost in translation. Add proper handling for this boundary by accounting for the carry from the lower addition.

In the Linux kernel, the following vulnerability has been resolved: crypto: pcrypt - restore callback for non-parallel fallback pcrypt installs pcrypt_aead_done() on the child AEAD request before trying to submit it through padata. If padata_do_parallel() returns -EBUSY, pcrypt falls back to calling the child AEAD directly. That fallback must not keep the padata completion callback. Otherwise an asynchronous completion runs pcrypt_aead_done() even though the request was never enrolled in padata. Restore the original request callback and callback data before calling the child AEAD directly. This keeps the fallback path aligned with a direct AEAD request while leaving the parallel path unchanged.

In the Linux kernel, the following vulnerability has been resolved: crypto: loongson - Remove broken and unused loongson-rng The loongson-rng rng_alg has several vulnerabilities, including not providing forward security, and a use-after-free bug due to the use of wait_for_completion_interruptible(). Meanwhile, the rng_alg framework doesn't really have any purpose in the first place other than to access the software algorithms crypto/drbg.c and crypto/jitterentropy.c. Hardware-specific rng_algs have no in-kernel user, and unlike hwrng there's no feed into the actual Linux RNG. As such, there's really no point to this code. There are of course other rng_alg drivers that are similarly unused, but they're similarly in the process of being phased out, e.g. https://lore.kernel.org/r/20260529193648.18172-1-ebiggers@kernel.org and https://lore.kernel.org/r/20260529220430.34135-1-ebiggers@kernel.org Given that, there's no point in fixing forward these vulnerabilities, and it makes much more sense to simply roll back the addition of this driver. If this platform provides TRNG (not PRNG) functionality, it could make sense to add a hwrng driver, but it would be quite different.

In the Linux kernel, the following vulnerability has been resolved: crypto: qat - validate RSA CRT component lengths The generic RSA key parser (rsa_helper.c) bounds each CRT component (p, q, dp, dq, qinv) by the modulus size n_sz, but qat_rsa_setkey_crt() allocates half-size DMA buffers (key_sz / 2) and right-aligns each component with: memcpy(dst + half_key_sz - len, src, len) When a CRT component is larger than half_key_sz the subtraction underflows and memcpy writes past the DMA buffer, causing memory corruption. Add a len > half_key_sz check next to the existing !len check for each of the five CRT components so the driver falls back to the non-CRT path instead of writing out of bounds.

In the Linux kernel, the following vulnerability has been resolved: perf/aux: Fix page UAF in map_range() map_range() reads rb->aux_pages[], rb->aux_nr_pages and rb->aux_pgoff via perf_mmap_to_page() while holding only event->mmap_mutex. Those fields are serialized by rb->aux_mutex, and mmap_mutex is per event. Thus, two events sharing one rb via PERF_EVENT_IOC_SET_OUTPUT can race rb_alloc_aux() with map_range(), leading to a page-UAF scenario as follows: CPU 0 CPU 1 ===== ===== rb_alloc_aux() map_range() [1]: allocate rb->aux_pages[0] [2]: rb->aux_nr_pages++ [3]: perf_mmap_to_page() returns rb->aux_pages[0] [4]: map it as VM_PFNMAP [5]: rb->aux_pgoff = 1 munmap the page [6]: free rb->aux_pages[0] Pages mapped as VM_PFNMAP have no refcount protection, so CPU 1 holds a mapping to a freed physical frame. Fix this by taking rb->aux_mutex across the page walk in map_range().

In the Linux kernel, the following vulnerability has been resolved: tracing: Prevent out-of-bounds read in glob matching String event fields are not necessarily NUL-terminated, so the filter predicate functions (filter_pred_string(), filter_pred_strloc() and filter_pred_strrelloc()) pass the field length to the regex match callbacks, and the length-aware matchers honour it. regex_match_glob() was the exception: it ignored the length and called glob_match(), which scans the string until it hits a NUL byte. Some string fields are not NUL-terminated. One example is the dynamic char array of the xfs_* namespace tracepoints, which is copied without a trailing NUL. For such a field, glob matching reads past the end of the event field, causing a KASAN slab-out-of-bounds read in glob_match(), reached via regex_match_glob() and filter_match_preds() from the xfs_lookup tracepoint. Add a length-bounded glob_match_len() and use it from regex_match_glob() so glob matching always stops at the field boundary. The matching loop is factored into a shared helper so glob_match() keeps its behaviour.

In the Linux kernel, the following vulnerability has been resolved: NFSv4: include MAY_WRITE in open permission mask for O_TRUNC POSIX requires write permission to truncate a file, so an open() that specifies O_TRUNC must be authorized for write access regardless of the O_ACCMODE access mode. nfs_open_permission_mask() builds the access mask passed to nfs_may_open(), which is the local authorization gate for OPENs the client serves itself from a cached write delegation via the can_open_delegated() path in nfs4_try_open_cached(). The mask is derived from O_ACCMODE alone, so an open(O_RDONLY | O_TRUNC) against a file the caller cannot write requests only MAY_READ and passes the local check. The OPEN is then satisfied locally and the truncation is issued to the server as a SETATTR(size=0) over the delegation stateid, which the server accepts under standard write-delegation semantics. POSIX requires that this open fail with EACCES. Include MAY_WRITE in the mask whenever O_TRUNC is set so the local check matches the access the server would have enforced.

In the Linux kernel, the following vulnerability has been resolved: exfat: bound uniname advance in exfat_find_dir_entry() In exfat_find_dir_entry(), each TYPE_EXTEND (file name) entry advances the output pointer by a fixed amount while the loop guard only tracks the accumulated name length: if (++order == 2) uniname = p_uniname->name; else uniname += EXFAT_FILE_NAME_LEN; len = exfat_extract_uni_name(ep, entry_uniname); name_len += len; unichar = *(uniname+len); *(uniname+len) = 0x0; uniname grows by EXFAT_FILE_NAME_LEN (15) per name entry, but name_len grows only by the actual extracted length, which is shorter when a name fragment contains an early NUL. The only guard is `name_len >= MAX_NAME_LENGTH`, so a crafted directory with many short name fragments lets uniname run far past the p_uniname->name[MAX_NAME_LENGTH + 3] buffer while name_len stays small, causing an out-of-bounds read and write at *(uniname+len). The sibling extractor exfat_get_uniname_from_ext_entry() already stops on a short fragment (the lockstep `len != EXFAT_FILE_NAME_LEN` guard added in commit d42334578eba ("exfat: check if filename entries exceeds max filename length")); exfat_find_dir_entry() never got the equivalent. Track the per-entry write offset as a count and reject a fragment once the offset, or the offset plus the extracted length, would exceed MAX_NAME_LENGTH, before forming the output pointer.