CVE Database

In the Linux kernel, the following vulnerability has been resolved: comedi: pcl726: Prevent invalid irq number The reproducer passed in an irq number(0x80008000) that was too large, which triggered the oob. Added an interrupt number check to prevent users from passing in an irq number that was too large. If `it->options[1]` is 31, then `1 << it->options[1]` is still invalid because it shifts a 1-bit into the sign bit (which is UB in C). Possible solutions include reducing the upper bound on the `it->options[1]` value to 30 or lower, or using `1U << it->options[1]`. The old code would just not attempt to request the IRQ if the `options[1]` value were invalid. And it would still configure the device without interrupts even if the call to `request_irq` returned an error. So it would be better to combine this test with the test below.

In the Linux kernel, the following vulnerability has been resolved: tracing: Limit access to parser->buffer when trace_get_user failed When the length of the string written to set_ftrace_filter exceeds FTRACE_BUFF_MAX, the following KASAN alarm will be triggered: BUG: KASAN: slab-out-of-bounds in strsep+0x18c/0x1b0 Read of size 1 at addr ffff0000d00bd5ba by task ash/165 CPU: 1 UID: 0 PID: 165 Comm: ash Not tainted 6.16.0-g6bcdbd62bd56-dirty Hardware name: linux,dummy-virt (DT) Call trace: show_stack+0x34/0x50 (C) dump_stack_lvl+0xa0/0x158 print_address_description.constprop.0+0x88/0x398 print_report+0xb0/0x280 kasan_report+0xa4/0xf0 __asan_report_load1_noabort+0x20/0x30 strsep+0x18c/0x1b0 ftrace_process_regex.isra.0+0x100/0x2d8 ftrace_regex_release+0x484/0x618 __fput+0x364/0xa58 ____fput+0x28/0x40 task_work_run+0x154/0x278 do_notify_resume+0x1f0/0x220 el0_svc+0xec/0xf0 el0t_64_sync_handler+0xa0/0xe8 el0t_64_sync+0x1ac/0x1b0 The reason is that trace_get_user will fail when processing a string longer than FTRACE_BUFF_MAX, but not set the end of parser->buffer to 0. Then an OOB access will be triggered in ftrace_regex_release-> ftrace_process_regex->strsep->strpbrk. We can solve this problem by limiting access to parser->buffer when trace_get_user failed.

In the Linux kernel, the following vulnerability has been resolved: i2c: rtl9300: Fix out-of-bounds bug in rtl9300_i2c_smbus_xfer The data->block[0] variable comes from user. Without proper check, the variable may be very large to cause an out-of-bounds bug. Fix this bug by checking the value of data->block[0] first. 1. commit 39244cc75482 ("i2c: ismt: Fix an out-of-bounds bug in ismt_access()") 2. commit 92fbb6d1296f ("i2c: xgene-slimpro: Fix out-of-bounds bug in xgene_slimpro_i2c_xfer()")

In the Linux kernel, the following vulnerability has been resolved: net/sched: Fix backlog accounting in qdisc_dequeue_internal This issue applies for the following qdiscs: hhf, fq, fq_codel, and fq_pie, and occurs in their change handlers when adjusting to the new limit. The problem is the following in the values passed to the subsequent qdisc_tree_reduce_backlog call given a tbf parent: When the tbf parent runs out of tokens, skbs of these qdiscs will be placed in gso_skb. Their peek handlers are qdisc_peek_dequeued, which accounts for both qlen and backlog. However, in the case of qdisc_dequeue_internal, ONLY qlen is accounted for when pulling from gso_skb. This means that these qdiscs are missing a qdisc_qstats_backlog_dec when dropping packets to satisfy the new limit in their change handlers. One can observe this issue with the following (with tc patched to support a limit of 0): export TARGET=fq tc qdisc del dev lo root tc qdisc add dev lo root handle 1: tbf rate 8bit burst 100b latency 1ms tc qdisc replace dev lo handle 3: parent 1:1 $TARGET limit 1000 echo ''; echo 'add child'; tc -s -d qdisc show dev lo ping -I lo -f -c2 -s32 -W0.001 127.0.0.1 2>&1 >/dev/null echo ''; echo 'after ping'; tc -s -d qdisc show dev lo tc qdisc change dev lo handle 3: parent 1:1 $TARGET limit 0 echo ''; echo 'after limit drop'; tc -s -d qdisc show dev lo tc qdisc replace dev lo handle 2: parent 1:1 sfq echo ''; echo 'post graft'; tc -s -d qdisc show dev lo The second to last show command shows 0 packets but a positive number (74) of backlog bytes. The problem becomes clearer in the last show command, where qdisc_purge_queue triggers qdisc_tree_reduce_backlog with the positive backlog and causes an underflow in the tbf parent's backlog (4096 Mb instead of 0). To fix this issue, the codepath for all clients of qdisc_dequeue_internal has been simplified: codel, pie, hhf, fq, fq_pie, and fq_codel. qdisc_dequeue_internal handles the backlog adjustments for all cases that do not directly use the dequeue handler. The old fq_codel_change limit adjustment loop accumulated the arguments to the subsequent qdisc_tree_reduce_backlog call through the cstats field. However, this is confusing and error prone as fq_codel_dequeue could also potentially mutate this field (which qdisc_dequeue_internal calls in the non gso_skb case), so we have unified the code here with other qdiscs.

In the Linux kernel, the following vulnerability has been resolved: net: usb: asix_devices: Fix PHY address mask in MDIO bus initialization Syzbot reported shift-out-of-bounds exception on MDIO bus initialization. The PHY address should be masked to 5 bits (0-31). Without this mask, invalid PHY addresses could be used, potentially causing issues with MDIO bus operations. Fix this by masking the PHY address with 0x1f (31 decimal) to ensure it stays within the valid range.

In the Linux kernel, the following vulnerability has been resolved: gve: prevent ethtool ops after shutdown A crash can occur if an ethtool operation is invoked after shutdown() is called. shutdown() is invoked during system shutdown to stop DMA operations without performing expensive deallocations. It is discouraged to unregister the netdev in this path, so the device may still be visible to userspace and kernel helpers. In gve, shutdown() tears down most internal data structures. If an ethtool operation is dispatched after shutdown(), it will dereference freed or NULL pointers, leading to a kernel panic. While graceful shutdown normally quiesces userspace before invoking the reboot syscall, forced shutdowns (as observed on GCP VMs) can still trigger this path. Fix by calling netif_device_detach() in shutdown(). This marks the device as detached so the ethtool ioctl handler will skip dispatching operations to the driver.

In the Linux kernel, the following vulnerability has been resolved: s390/mm: Do not map lowcore with identity mapping Since the identity mapping is pinned to address zero the lowcore is always also mapped to address zero, this happens regardless of the relocate_lowcore command line option. If the option is specified the lowcore is mapped twice, instead of only once. This means that NULL pointer accesses will succeed instead of causing an exception (low address protection still applies, but covers only parts). To fix this never map the first two pages of physical memory with the identity mapping.

In the Linux kernel, the following vulnerability has been resolved: drm/xe: Fix vm_bind_ioctl double free bug If the argument check during an array bind fails, the bind_ops are freed twice as seen below. Fix this by setting bind_ops to NULL after freeing. ================================================================== BUG: KASAN: double-free in xe_vm_bind_ioctl+0x1b2/0x21f0 [xe] Free of addr ffff88813bb9b800 by task xe_vm/14198 CPU: 5 UID: 0 PID: 14198 Comm: xe_vm Not tainted 6.16.0-xe-eudebug-cmanszew+ #520 PREEMPT(full) Hardware name: Intel Corporation Alder Lake Client Platform/AlderLake-P DDR5 RVP, BIOS ADLPFWI1.R00.2411.A02.2110081023 10/08/2021 Call Trace: <TASK> dump_stack_lvl+0x82/0xd0 print_report+0xcb/0x610 ? __virt_addr_valid+0x19a/0x300 ? xe_vm_bind_ioctl+0x1b2/0x21f0 [xe] kasan_report_invalid_free+0xc8/0xf0 ? xe_vm_bind_ioctl+0x1b2/0x21f0 [xe] ? xe_vm_bind_ioctl+0x1b2/0x21f0 [xe] check_slab_allocation+0x102/0x130 kfree+0x10d/0x440 ? should_fail_ex+0x57/0x2f0 ? xe_vm_bind_ioctl+0x1b2/0x21f0 [xe] xe_vm_bind_ioctl+0x1b2/0x21f0 [xe] ? __pfx_xe_vm_bind_ioctl+0x10/0x10 [xe] ? __lock_acquire+0xab9/0x27f0 ? lock_acquire+0x165/0x300 ? drm_dev_enter+0x53/0xe0 [drm] ? find_held_lock+0x2b/0x80 ? drm_dev_exit+0x30/0x50 [drm] ? drm_ioctl_kernel+0x128/0x1c0 [drm] drm_ioctl_kernel+0x128/0x1c0 [drm] ? __pfx_xe_vm_bind_ioctl+0x10/0x10 [xe] ? find_held_lock+0x2b/0x80 ? __pfx_drm_ioctl_kernel+0x10/0x10 [drm] ? should_fail_ex+0x57/0x2f0 ? __pfx_xe_vm_bind_ioctl+0x10/0x10 [xe] drm_ioctl+0x352/0x620 [drm] ? __pfx_drm_ioctl+0x10/0x10 [drm] ? __pfx_rpm_resume+0x10/0x10 ? do_raw_spin_lock+0x11a/0x1b0 ? find_held_lock+0x2b/0x80 ? __pm_runtime_resume+0x61/0xc0 ? rcu_is_watching+0x20/0x50 ? trace_irq_enable.constprop.0+0xac/0xe0 xe_drm_ioctl+0x91/0xc0 [xe] __x64_sys_ioctl+0xb2/0x100 ? rcu_is_watching+0x20/0x50 do_syscall_64+0x68/0x2e0 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7fa9acb24ded (cherry picked from commit a01b704527c28a2fd43a17a85f8996b75ec8492a)

ECOVACS vacuum robot base stations do not validate firmware updates, so malicious over-the-air updates can be sent to base station via insecure connection between robot and base station.

Improper Control of Filename for Include/Require Statement in PHP Program ('PHP Remote File Inclusion') vulnerability in gavias Indutri indutri allows PHP Local File Inclusion.This issue affects Indutri: from n/a through < 1.3.0.

Improper Control of Filename for Include/Require Statement in PHP Program ('PHP Remote File Inclusion') vulnerability in ThemeMove MaxCoach maxcoach allows PHP Local File Inclusion.This issue affects MaxCoach: from n/a through <= 3.2.5.

Improper Control of Filename for Include/Require Statement in PHP Program ('PHP Remote File Inclusion') vulnerability in RealMag777 InPost Gallery inpost-gallery allows PHP Local File Inclusion.This issue affects InPost Gallery: from n/a through <= 2.1.4.5.

Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in Beaver Builder WordPress Assistant assistant allows Reflected XSS.This issue affects WordPress Assistant: from n/a through <= 1.5.2.

Path Traversal: '.../...//' vulnerability in Stefan Keller WooCommerce Payment Gateway for Saferpay woocommerce-payment-gateway-for-saferpay allows Path Traversal.This issue affects WooCommerce Payment Gateway for Saferpay: from n/a through <= 0.4.9.

Cross-Site Request Forgery (CSRF) vulnerability in ericzane Floating Window Music Player floating-window-music-player allows Stored XSS.This issue affects Floating Window Music Player: from n/a through <= 3.4.2.

In System UI, there is a possible way to view other users' images due to a confused deputy. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation.

In Skia, there is a possible out of bounds write due to a heap buffer overflow. This could lead to remote escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation.

index.em7 in ScienceLogic SL1 before 12.1.1 allows SQL Injection via a parameter in a request. NOTE: this is disputed by the Supplier because it "inaccurately describes the vulnerability."

Improper Neutralization of Special Elements used in an SQL Command ('SQL Injection') vulnerability in gopiplus New Simple Gallery new-simple-gallery allows Blind SQL Injection.This issue affects New Simple Gallery: from n/a through <= 8.0.

Cross-Site Request Forgery (CSRF) vulnerability in WP Corner Quick Event Calendar quick-event-calendar allows Stored XSS.This issue affects Quick Event Calendar: from n/a through <= 1.4.9.

Cross-Site Request Forgery (CSRF) vulnerability in KaizenCoders Enable Latex enable-latex allows Stored XSS.This issue affects Enable Latex: from n/a through <= 1.2.16.

Cross-Site Request Forgery (CSRF) vulnerability in David Merinas Add to Feedly add-to-feedly allows Stored XSS.This issue affects Add to Feedly: from n/a through <= 1.2.11.

Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in KaizenCoders Table of content content-table allows Stored XSS.This issue affects Table of content: from n/a through <= 1.5.3.1.

Improper Neutralization of Formula Elements in a CSV File vulnerability in Denis V (Artprima) AP HoneyPot WordPress Plugin ap-honeypot allows Reflected XSS.This issue affects AP HoneyPot WordPress Plugin: from n/a through <= 1.4.

Cross-Site Request Forgery (CSRF) vulnerability in Samer Bechara Ultimate AJAX Login ultimate-ajax-login allows Reflected XSS.This issue affects Ultimate AJAX Login: from n/a through <= 1.2.1.

Cross-Site Request Forgery (CSRF) vulnerability in OTWthemes Popping Sidebars and Widgets Light popping-sidebars-and-widgets-light allows Reflected XSS.This issue affects Popping Sidebars and Widgets Light: from n/a through <= 1.27.

Cross-Site Request Forgery (CSRF) vulnerability in Mark O'Donnell MSTW League Manager mstw-league-manager allows Stored XSS.This issue affects MSTW League Manager: from n/a through <= 2.10.

Cross-Site Request Forgery (CSRF) vulnerability in Deepak S Hide Real Download Path hide-real-download-path allows Stored XSS.This issue affects Hide Real Download Path: from n/a through <= 1.6.

Cross-Site Request Forgery (CSRF) vulnerability in aakash1911 WP likes wp-likes allows Reflected XSS.This issue affects WP likes: from n/a through <= 3.1.1.

Cross-Site Request Forgery (CSRF) vulnerability in Yaidier WN Flipbox Pro wn-flipbox-pro allows Reflected XSS.This issue affects WN Flipbox Pro: from n/a through <= 2.1.