CVE Database

In the Linux kernel, the following vulnerability has been resolved: orangefs: keep the readdir entry size 64-bit in fill_from_part() fill_from_part() computes the size of a directory entry in size_t but stores it in a __u32. An entry length near U32_MAX wraps it to a small value, bypasses the bounds check, and is then used to index the entry, reading far past the directory part -- an out-of-bounds read that oopses the kernel. Compute the size as a u64 so it cannot truncate; the bounds check then rejects the entry. The trailer is supplied by the userspace client.

In the Linux kernel, the following vulnerability has been resolved: ipvs: reset full ip_vs_seq structs in ip_vs_conn_new Commit 9a05475cebdd ("ipvs: avoid kmem_cache_zalloc in ip_vs_conn_new") changed ip_vs_conn_new() to allocate an ip_vs_conn object with kmem_cache_alloc(). The function then initializes many fields explicitly, but only resets in_seq.delta and out_seq.delta in the two struct ip_vs_seq members. That leaves init_seq and previous_delta uninitialized. This is normally harmless while the corresponding IP_VS_CONN_F_IN_SEQ or IP_VS_CONN_F_OUT_SEQ flag is clear. For connections learned from a sync message, however, ip_vs_proc_conn() preserves those flags from IP_VS_CONN_F_BACKUP_MASK and passes opt=NULL when the message omits IPVS_OPT_SEQ_DATA. In that case the new connection can be hashed with SEQ flags set but with the rest of in_seq/out_seq still containing stale slab data. When a packet for such a connection is later handled by an IPVS application helper, vs_fix_seq() and vs_fix_ack_seq() use previous_delta and init_seq to rewrite TCP sequence numbers. A malformed sync message can therefore make forwarded packets carry stale slab bytes in their TCP seq/ack numbers, and can also corrupt the forwarded TCP flow. Reset both struct ip_vs_seq members completely before publishing the connection. This matches the existing "reset struct ip_vs_seq" comment and keeps the sequence-adjustment gates inactive unless valid sequence data is installed later.

In the Linux kernel, the following vulnerability has been resolved: drbd: reject data replies with an out-of-range payload size recv_dless_read() receives a P_DATA_REPLY from a peer into the bio of an outstanding read request. The peer-supplied payload length reaches it as the signed int data_size, and two peer-controlled inputs can make it negative. With a negotiated data-integrity-alg the digest length is subtracted first, so a reply whose payload is smaller than the digest underflows data_size. With no integrity algorithm (the default) data_size is assigned from the unsigned h95/h100 wire length and drbdd() never bounds it for a payload-carrying command, so a length above INT_MAX casts it negative; this path needs no non-default feature. The bio receive loop then computes expect = min_t(int, data_size, bv_len), which is negative, and drbd_recv_all_warn(mapped, expect) receives with a size_t of SIZE_MAX into the first mapped page. The sibling receive path read_in_block() is not affected: it uses an unsigned size and rejects it against DRBD_MAX_BIO_SIZE before receiving. Reject a data reply whose size is negative after the optional digest subtraction, covering both triggers. Impact: a malicious or man-in-the-middle DRBD peer copies attacker-chosen bytes past a bio page in the receiver, corrupting kernel memory. A node that reads from its peer (a diskless node, or read-balancing to the peer) is exposed in the default configuration; data-integrity-alg is not required.

In the Linux kernel, the following vulnerability has been resolved: ipvs: fix more places with wrong ipv6 transport offsets Sashiko reports for more incorrect IPv6 transport offsets. The app code for TCP was assuming IPv4 network header even after the ipvsh argument was provided. This can cause problems with apps over IPv6. As for the only official app in the kernel tree (FTP) this problem is harmless because we use Netfilter to mangle the FTP ports and we do not adjust the TCP seq numbers. Also, provide correct offset of the ICMPV6 header in ip_vs_out_icmp_v6() for correct checksum checks when the IPv6 packet has extension headers.

In the Linux kernel, the following vulnerability has been resolved: ipvs: reload ip header after head reallocation __ip_vs_get_out_rt() calls skb_ensure_writable() which may reallocate skb->head.

In the Linux kernel, the following vulnerability has been resolved: ksmbd: use opener credentials for FSCTL mutations SET_SPARSE, SET_ZERO_DATA and SET_COMPRESSION operate on an open SMB handle but call VFS xattr, fallocate or fileattr helpers with the current ksmbd worker credentials. Those helpers can revalidate inode permissions, ownership and LSM policy independently of the SMB handle access mask. Run each operation with the credentials captured in the target file when the handle was opened. Keep credential handling local to these single-file FSCTLs rather than applying session credentials to the complete IOCTL handler, which also contains handle-less and multi-handle operations.

The User Session Synchronizer plugin for WordPress is vulnerable to Authentication Bypass leading to Account Takeover in all versions up to, and including, 1.4.0. The `synchronize_session()` function, hooked on `init` and therefore executed on every request, performs no nonce, capability, or shared-secret validation against the attacker-supplied `ussync-key`, `ussync-token`, and `ussync-ref` parameters; when `ussync-key` references an unregistered slot, `get_option()` returns `false` for both the secret key and the domain list, causing the AES-256-CBC encryption key to degrade to the fully predictable `md5('')` and the referer allowlist to collapse to an empty-string match, while the AES IV is unconditionally hard-coded as `md5('another-secret')`. This makes it possible for unauthenticated attackers to supply a crafted request encrypting any known or guessable user email address in the `ussync-ref` parameter, causing the handler to call `wp_set_auth_cookie()` for the matched user and granting full authentication as that user — including administrators — with no prior knowledge of site secrets.

The 6Storage Rentals plugin for WordPress is vulnerable to authentication bypass in versions up to, and including, 2.27.0. This is due to the six_storage_create_wp_user() AJAX handler being registered on wp_ajax_nopriv_six_storage_create_wp_user without any nonce, capability, credential, or ownership verification, while calling wp_set_current_user() and wp_set_auth_cookie() for any WordPress user resolved by the attacker-supplied email address. This makes it possible for unauthenticated attackers to log in as any existing WordPress user, including administrators, by submitting that user's email address.

The RapiSafe – Secure Multi File Upload for Contact Form 7 plugin for WordPress is vulnerable to arbitrary file deletion due to insufficient file path validation in the handleAjaxRemoveUpload function in all versions up to, and including, 1.0.4. This makes it possible for unauthenticated attackers to delete arbitrary files on the server, which can easily lead to remote code execution when the right file is deleted (such as wp-config.php). The nonce required to invoke the removal handler is exposed in public-facing JavaScript as RSMFCF7Vars.nonce on every Contact Form 7 page rendering a RapiSafe upload field, making it obtainable by any unauthenticated visitor.

Joomla Extension - icagenda.com - Unauthenticated SQL injection in iCagenda < 4.0.0-4.0.11 - Unauthenticated SQL injection in mod_icagenda_calendar (iCagenda), reachable via com_ajax with no session, token or account.

IBM Db2 Mirror for i 7.4, 7.5, and 7.6 could allow a remote attacker to execute arbitrary CL commands due to improper neutralization of special elements in a command.

IBM Db2 Mirror for i 7.4, 7.5, and 7.6 could allow a remote attacker to execute arbitrary code due to external control of file name or path.

IBM Db2 Mirror for i 7.4, 7.5, and 7.6 could allow a remote attacker to bypass authentication and obtain or alter sensitive information due to improper validation of request URI path segments.

IBM Db2 Mirror for i 7.4, 7.5, and 7.6 could allow a remote attacker to write files to arbitrary locations due to path traversal.

MindsDB Minds Platform version 26.1.0 and earlier contains an unauthenticated remote code execution vulnerability that allows unauthenticated attackers to execute arbitrary OS commands by submitting crafted prompts to the unprotected POST /api/v1/responses/ endpoint, which reaches the Anton agent's scratchpad tool that calls exec() on attacker-influenced Python source without sandboxing. Attackers can first configure their own LLM API key through the unauthenticated PUT /api/v1/settings/ endpoint, then POST a prompt directing the agent to invoke the scratchpad tool with arbitrary Python code, achieving full OS command execution as the user running the desktop application and enabling access to SSH keys, stored credentials, and environment secrets.

mcp-memory-service is a semantic memory layer for AI applications. Prior to 10.67.1, all HTTP routes under /api/documents/* in mcp-memory-service are served without any authentication dependency, even when the server is configured with an API key (MCP_API_KEY) or OAuth. An unauthenticated remote attacker can upload arbitrary content into the memory store (write), retrieve stored document content (read), and permanently delete memories belonging to authenticated users (delete) — all without supplying any credentials. The /api/memories counterpart correctly enforces authentication, making this an inconsistent and exploitable authentication boundary. This vulnerability is fixed in 10.67.1.

erlang_quic is a pure Erlang QUIC implementation. Prior to version 1.4.4, the QUIC client did not authenticate the server during the TLS 1.3 handshake. The CertificateVerify signature was not checked, the certificate chain was not validated, and the hostname was not compared against the certificate, so `verify` was effectively a no-op on the client. A man-in-the-middle on the network path could present any certificate and impersonate any server, defeating the confidentiality and integrity of the connection. HTTP/3 uses the same client and was equally affected. Handshakes authenticated by a PSK (session resumption) are not affected, because the peer is authenticated by the PSK binder and no certificate is sent. This is fixed in 1.4.4. The client now verifies the CertificateVerify signature, validates the certificate chain against the trust store (`cacerts` option, the operating system store by default), and checks the hostname. Client `verify` now defaults to on; set `verify => false` to accept any certificate (for example a self-signed test server). No known workarounds are available before 1.4.4. `verify => true` had no effect, and inspecting the certificate after connecting does not help because without the signature check the peer is never proven to own the certificate it presents.

A critical OS command injection vulnerability has been identified in the Haiwell IoT Cloud HMI Gateway product. The vulnerability exists in the Net Check feature accessible via the /setting endpoint. The cmdPing Socket.io event fails to properly sanitize user-supplied input before passing it to the underlying operating system, allowing an attacker to inject and execute arbitrary OS commands with root privileges.

Emlog is an open source website building system. In 2.6.26 and earlier, install.php accepts action=reinstall without authentication and deliberately skips the already-installed check because the guard runs only when $act != 'reinstall'. A remote attacker can submit hostname, dbuser, dbpasswd, dbname, dbprefix, username, password, and email values to cause file_put_contents('config.php', $config) to overwrite the configuration with attacker-controlled database settings and create a new administrator account. No fixed version is available as of this review.

Metacat is data repository software that helps researchers preserve, share, and discover data. Metacat versions 2.0.0 through 3.4.0 contain an unauthenticated SQL injection vulnerability in the `/cn/v1/object` and `/cn/v2/object` REST API endpoints due to unsanitized user input that can be passed through to the backend SQL database. The `nodeId` parameter can be modified to inject SQL commands, and the results are returned in error messages. Metacat appends the user-supplied data into the sql query without sanitization or parameterization. This allows extraction of arbitrary data from the underlying PostgresQL database, fully exposing protected information to the attacker. This is accomplished by leveraging the error reporting mechanisms in Metacat, where SQL error responses are mirrored back to the caller in the XML error message returned by Metacat. One approach, for example, is to use the PostgreSQL `CAST` function to generate an error with the results of an arbitrary subquery, which is then injected into the XML error message returned by Metacat. Attackers do not need to be authenticated to execute the attack. In addition, arbitrary SQL statements that insert, update, and delete data in the Metacat database can be executed, resulting in full compromise of all data in the database. Full proof of concept attacks have been developed and verified for these vulnerabilities. The impact of this vulnerability is critical for Metacat deployments in the DataONE network where information from the database can be exfiltrated, added, changed, or deleted. This includes management information about the data catalog, access log information about who accessed data, identifying information about individuals including their ORCID identifier and client IP address, access control information about who should be able to access and modify data, and other critical internals of the data system. This sql injection vulnerability was remediated fully in Metacat version 3.4.1. If upgrading to Metacat 3.4.1 isn't immediately possible, most deployments can mitigate the issue by disabling the `/cn` REST endpoints in the webapp deployment. This API is not needed or used by member repositories in the DataONE network, as it is only used by the DataONE Coordinating Node deployments. Consequently, this API can be disabled without reduction of functionality for most deployments. To disable the vulnerable endpoints, simply remove the servlet and servlet-mapping for the `/cn` endpoints in the servlet engine associated with the two servlets, `edu.ucsb.nceas.metacat.restservice.v1.CNRestServlet` and `edu.ucsb.nceas.metacat.restservice.v2.CNRestServlet`. For example, in Tomcat, remove the relevant `servlet-mapping` elements from the application web.xml file in Metacat.

A command injection vulnerability exists in Security Center where a remote, unauthenticated attacker could exploit this issue to execute arbitrary commands on the underlying operating system with the privileges of the service account.

An authenticated command injection vulnerability exists in Security Center related to file upload processing. An attacker could exploit this issue by uploading a specially crafted file, potentially resulting in arbitrary command execution on the underlying operating system.

A remote code execution vulnerability exists in Tenable Security Center's report generation functionality. An authenticated, non-administrative user could exploit this issue by supplying specially crafted input that is later processed unsafely during server-side report rendering, resulting in arbitrary code execution with the privileges of the service account.

Use of Hard-coded Credentials in the human resources component in Roskus Prospero Flow CRM before 5.15.9 allows unauthenticated remote attackers to authenticate as any employee onboarded through the standard flow, knowing only their email address, because the employee save controller falls back to the literal password "changeme" and the onboarding form provides no password field.

SiYuan versions <= v3.7.2 contain a SQL injection vulnerability in the backlink/mention search query (kernel/model/backlink.go), which concatenates stored block metadata (title, name, alias, anchor text) and the client-supplied keyword into a SQL MATCH/search statement while escaping only the double-quote character and not the single quote. A single quote in the client keyword (first-order, reachable by an anonymous or RoleReader user on the publish surface) or in stored document metadata (second-order) breaks out of the string literal. Because the query runs on the main read-write siyuan.db handle via a statement-stacking-capable driver, an attacker can execute arbitrary SQL, enabling cross-notebook read and write. Fixed in v3.7.4.

The Wishlist Member plugin for WordPress is vulnerable to Account Takeover via Insufficient Verification of Data Authenticity in versions up to and including 3.34.1. This is due to the wpm_register() function validating the registration cookie only against the GET reg parameter while accepting the POST mergewith and POST wpm_id parameters without verifying that the mergewith user ID references a temporary or incomplete registrant that is bound to the current registration transaction. This makes it possible for unauthenticated attackers to take over any existing WordPress account — including administrator accounts — by supplying an arbitrary user's numeric ID as the mergewith value, which causes wp_update_user() to overwrite the target account's username (additionally written via a direct $wpdb UPDATE), password, email address, first name, and last name with attacker-controlled values, while WordPress password and email change notification emails are explicitly suppressed. When wpm_id references a non-existent membership level, no role key is added to the update payload, causing wp_update_user() to preserve the target user's existing role — including administrator — making full privilege escalation a direct consequence of the takeover.

OpenChoreo is a complete, open-source developer platform for Kubernetes. Prior to 1.0.2 and 1.1.2, internal/cluster-gateway/server.go served caller-facing management APIs on the externally reachable agent listener without authentication, allowing network-reachable attackers to invoke /api/proxy/ and /api/exec/ operations, proxy the data-plane Kubernetes API, and execute commands in workload pods in multi-cluster deployments. This issue is fixed in versions 1.0.2 and 1.1.2.

OpenChoreo is a complete, open-source developer platform for Kubernetes. Prior to 1.0.3, 1.1.3, and 1.2.0-rc.2, internal/cluster-gateway/server.go exposed /api/proxy/, /api/exec/, and /api/wirelogs/ on an internal listener without requiring a client certificate or token, allowing any network-reachable caller to read tenant Kubernetes Secrets, mutate workloads, and execute commands across connected data planes. This issue is fixed in versions 1.0.3, 1.1.3, and 1.2.0-rc.2.

FreePBX is an open source IP PBX. Prior to 17.0.9, the UCP Node server on ports 8001 and 8003 uses io.use(checkAuth) in node/lib/server.js, but Socket.IO version 4 applies that middleware only to the default namespace. An unauthenticated client can connect to custom namespaces that do not consistently invoke checkAuth in node/lib/auth.js and send crafted event values containing carriage-return or newline characters through the Asterisk Manager Interface action path patched by node/lib/asterisk-manager-patch.js, allowing arbitrary commands to execute as the asterisk service user. This issue is fixed in version 17.0.9.

FreePBX is an open source IP PBX. From 16.0.0 until 16.0.11 and 17.0.4, the FreePBX missedcall module places the inbound Caller ID name from crafted SIP From headers into the missedcalllog INSERT in agi-bin/missedcallnotify.php without escaping or bound parameters. An unauthenticated caller can inject SQL when a monitored extension goes unanswered, corrupting the database and modifying FreePBX administrator accounts to obtain unauthorized remote access. This issue is fixed in versions 16.0.11 and 17.0.4.